arm: dtsi: dra76x: Add CAL dtsi node

Add the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA76 family of devices.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Benoit Parrot 2019-12-11 08:05:55 -06:00 committed by Tony Lindgren
parent 414dc3d33b
commit 807276375f

View File

@ -41,6 +41,48 @@ m_can0: mcan@1a00 {
};
&l4_per3 {
target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x1b0000 0x4>,
<0x1b0010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>;
clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1b0000 0x10000>;
cal: cal@0 {
compatible = "ti,dra76-cal";
reg = <0x0000 0x400>,
<0x0800 0x40>,
<0x0900 0x40>;
reg-names = "cal_top",
"cal_rx_core0",
"cal_rx_core1";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
ti,camerrx-control = <&scm_conf 0x6dc>;
ports {
#address-cells = <1>;
#size-cells = <0>;
csi2_0: port@0 {
reg = <0>;
};
csi2_1: port@1 {
reg = <1>;
};
};
};
};
};
/* MCAN interrupts are hard-wired to irqs 67, 68 */
&crossbar_mpu {
ti,irqs-skip = <10 67 68 133 139 140>;