mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 10:50:54 +07:00
[ARM] pxa: add MFP-alike pin configuration support for pxa{25x, 27x}
Pin configuration on pxa{25x,27x} has now separated from generic GPIO
into dedicated mfp-pxa2xx.c by this patch. The name "mfp" is borrowed
from pxa3xx and is used here to alert the difference between the two
concepts: pin configuration and generic GPIOs. A GPIO can be called
a "GPIO" _only_ when the corresponding pin is configured so.
A pin configuration on pxa{25x,27x} is composed of:
- alternate function selection (or pin mux as commonly called)
- low power state or sleep state
- wakeup enabling from low power mode
The following MFP_xxx bit definitions in mfp.h are re-used:
- MFP_PIN(x)
- MFP_AFx
- MFP_LPM_DRIVE_{LOW, HIGH}
- MFP_LPM_EDGE_*
Selecting alternate function on pxa{25x, 27x} involves configuration
of GPIO direction register GPDRx, so a new bit and MFP_DIR_{IN, OUT}
are introduced. And pin configurations are defined by the following
two macros:
- MFP_CFG_IN : for input alternate functions
- MFP_CFG_OUT : for output alternate functions
Every configuration should provide a low power state if it configured
as output using MFP_CFG_OUT(). As a general guideline, the low power
state should be decided to minimize the overall power dissipation. As
an example, it is better to drive the pin as high level in low power
mode if the GPIO is configured as an active low chip select.
Pins configured as GPIO are defined by MFP_CFG_IN(). This is to avoid
side effects when it is firstly configured as output. The actual
direction of the GPIO is configured by gpio_direction_{input, output}
Wakeup enabling on pxa{25x, 27x} is actually GPIO based wakeup, thus
the device based enable_irq_wake() mechanism is not applicable here.
E.g. invoking enable_irq_wake() with a GPIO IRQ as in the following
code to enable OTG wakeup is by no means portable and intuitive, and
it is valid _only_ when GPIO35 is configured as USB_P2_1:
enable_irq_wake( gpio_to_irq(35) );
To make things worse, not every GPIO is able to wakeup the system.
Only a small number of them can, on either rising or falling edge,
or when level is high (for keypad GPIOs).
Thus, another new bit is introduced to indicate that the GPIO will
wakeup the system:
- MFP_LPM_WAKEUP_ENABLE
The following macros can be used in platform code, and be OR'ed to
the GPIO configuration to enable its wakeup:
- WAKEUP_ON_EDGE_{RISE, FALL, BOTH}
- WAKEUP_ON_LEVEL_HIGH
The WAKEUP_ON_LEVEL_HIGH is used for keypad GPIOs _only_, there is
no edge settings for those GPIOs.
These WAKEUP_ON_* flags OR'ed on wrong GPIOs will be ignored in case
that platform code author is careless enough.
The tradeoff here is that the wakeup source is fully determined by
the platform configuration, instead of enable_irq_wake().
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
eric miao
Russell King
parent
a683b14df8
commit
7facc2f937
@ -5,8 +5,8 @@
|
||||
# Common support (must be linked before board specific support)
|
||||
obj-y += clock.o devices.o generic.o irq.o dma.o \
|
||||
time.o gpio.o
|
||||
obj-$(CONFIG_PXA25x) += pxa25x.o
|
||||
obj-$(CONFIG_PXA27x) += pxa27x.o
|
||||
obj-$(CONFIG_PXA25x) += pxa25x.o mfp-pxa2xx.o
|
||||
obj-$(CONFIG_PXA27x) += pxa27x.o mfp-pxa2xx.o
|
||||
obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp-pxa3xx.o smemc.o
|
||||
obj-$(CONFIG_CPU_PXA300) += pxa300.o
|
||||
obj-$(CONFIG_CPU_PXA320) += pxa320.o
|
||||
|
||||
190
arch/arm/mach-pxa/mfp-pxa2xx.c
Normal file
190
arch/arm/mach-pxa/mfp-pxa2xx.c
Normal file
@ -0,0 +1,190 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-pxa/mfp-pxa2xx.c
|
||||
*
|
||||
* PXA2xx pin mux configuration support
|
||||
*
|
||||
* The GPIOs on PXA2xx can be configured as one of many alternate
|
||||
* functions, this is by concept samilar to the MFP configuration
|
||||
* on PXA3xx, what's more important, the low power pin state and
|
||||
* wakeup detection are also supported by the same framework.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/sysdev.h>
|
||||
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/arch/mfp-pxa2xx.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
#define PGSR(x) __REG2(0x40F00020, ((x) & 0x60) >> 3)
|
||||
|
||||
#define PWER_WE35 (1 << 24)
|
||||
|
||||
static struct {
|
||||
unsigned valid : 1;
|
||||
unsigned can_wakeup : 1;
|
||||
unsigned keypad_gpio : 1;
|
||||
unsigned int mask; /* bit mask in PWER or PKWR */
|
||||
unsigned long config;
|
||||
} gpio_desc[MFP_PIN_GPIO127 + 1];
|
||||
|
||||
static inline int __mfp_config_gpio(unsigned gpio, unsigned long c)
|
||||
{
|
||||
unsigned long gafr, mask = GPIO_bit(gpio);
|
||||
int fn;
|
||||
|
||||
fn = MFP_AF(c);
|
||||
if (fn > 3)
|
||||
return -EINVAL;
|
||||
|
||||
/* alternate function and direction */
|
||||
gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2));
|
||||
GAFR(gpio) = gafr | (fn << ((gpio & 0xf) * 2));
|
||||
|
||||
if (c & MFP_DIR_OUT)
|
||||
GPDR(gpio) |= mask;
|
||||
else
|
||||
GPDR(gpio) &= ~mask;
|
||||
|
||||
/* low power state */
|
||||
switch (c & MFP_LPM_STATE_MASK) {
|
||||
case MFP_LPM_DRIVE_HIGH:
|
||||
PGSR(gpio) |= mask;
|
||||
break;
|
||||
case MFP_LPM_DRIVE_LOW:
|
||||
PGSR(gpio) &= ~mask;
|
||||
break;
|
||||
case MFP_LPM_INPUT:
|
||||
break;
|
||||
default:
|
||||
pr_warning("%s: invalid low power state for GPIO%d\n",
|
||||
__func__, gpio);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* wakeup enabling */
|
||||
if ((c & MFP_LPM_WAKEUP_ENABLE) == 0)
|
||||
return 0;
|
||||
|
||||
if (!gpio_desc[gpio].can_wakeup || c & MFP_DIR_OUT) {
|
||||
pr_warning("%s: GPIO%d unable to wakeup\n",
|
||||
__func__, gpio);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (gpio_desc[gpio].keypad_gpio)
|
||||
PKWR |= gpio_desc[gpio].mask;
|
||||
else {
|
||||
PWER |= gpio_desc[gpio].mask;
|
||||
|
||||
if (c & MFP_LPM_EDGE_RISE)
|
||||
PRER |= gpio_desc[gpio].mask;
|
||||
|
||||
if (c & MFP_LPM_EDGE_FALL)
|
||||
PFER |= gpio_desc[gpio].mask;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
|
||||
{
|
||||
unsigned long flags;
|
||||
unsigned long *c;
|
||||
int i, gpio;
|
||||
|
||||
for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
|
||||
|
||||
gpio = mfp_to_gpio(MFP_PIN(*c));
|
||||
|
||||
if (!gpio_desc[gpio].valid) {
|
||||
pr_warning("%s: GPIO%d is invalid pin\n",
|
||||
__func__, gpio);
|
||||
continue;
|
||||
}
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
gpio_desc[gpio].config = *c;
|
||||
__mfp_config_gpio(gpio, *c);
|
||||
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PXA25x
|
||||
static int __init pxa25x_mfp_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (cpu_is_pxa25x()) {
|
||||
for (i = 0; i <= 84; i++)
|
||||
gpio_desc[i].valid = 1;
|
||||
|
||||
for (i = 0; i <= 15; i++) {
|
||||
gpio_desc[i].can_wakeup = 1;
|
||||
gpio_desc[i].mask = GPIO_bit(i);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
postcore_initcall(pxa25x_mfp_init);
|
||||
#endif /* CONFIG_PXA25x */
|
||||
|
||||
#ifdef CONFIG_PXA27x
|
||||
static int pxa27x_pkwr_gpio[] __initdata = {
|
||||
13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94,
|
||||
95, 96, 97, 98, 99, 100, 101, 102
|
||||
};
|
||||
|
||||
static int __init pxa27x_mfp_init(void)
|
||||
{
|
||||
int i, gpio;
|
||||
|
||||
if (cpu_is_pxa27x()) {
|
||||
for (i = 0; i <= 120; i++) {
|
||||
/* skip GPIO2, 5, 6, 7, 8, they are not
|
||||
* valid pins allow configuration
|
||||
*/
|
||||
if (i == 2 || i == 5 || i == 6 ||
|
||||
i == 7 || i == 8)
|
||||
continue;
|
||||
|
||||
gpio_desc[i].valid = 1;
|
||||
}
|
||||
|
||||
/* Keypad GPIOs */
|
||||
for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
|
||||
gpio = pxa27x_pkwr_gpio[i];
|
||||
gpio_desc[gpio].can_wakeup = 1;
|
||||
gpio_desc[gpio].keypad_gpio = 1;
|
||||
gpio_desc[gpio].mask = 1 << i;
|
||||
}
|
||||
|
||||
/* Overwrite GPIO13 as a PWER wakeup source */
|
||||
for (i = 0; i <= 15; i++) {
|
||||
/* skip GPIO2, 5, 6, 7, 8 */
|
||||
if (GPIO_bit(i) & 0x1e4)
|
||||
continue;
|
||||
|
||||
gpio_desc[i].can_wakeup = 1;
|
||||
gpio_desc[i].mask = GPIO_bit(i);
|
||||
}
|
||||
|
||||
gpio_desc[35].can_wakeup = 1;
|
||||
gpio_desc[35].mask = PWER_WE35;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
postcore_initcall(pxa27x_mfp_init);
|
||||
#endif /* CONFIG_PXA27x */
|
||||
161
include/asm-arm/arch-pxa/mfp-pxa25x.h
Normal file
161
include/asm-arm/arch-pxa/mfp-pxa25x.h
Normal file
@ -0,0 +1,161 @@
|
||||
#ifndef __ASM_ARCH_MFP_PXA25X_H
|
||||
#define __ASM_ARCH_MFP_PXA25X_H
|
||||
|
||||
#include <asm/arch/mfp.h>
|
||||
#include <asm/arch/mfp-pxa2xx.h>
|
||||
|
||||
/* GPIO */
|
||||
#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0)
|
||||
#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
|
||||
#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
|
||||
#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0)
|
||||
#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0)
|
||||
#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0)
|
||||
#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0)
|
||||
|
||||
#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1)
|
||||
|
||||
/* Crystal and Clock Signals */
|
||||
#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
|
||||
#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
|
||||
#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW)
|
||||
#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
|
||||
#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
|
||||
#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
|
||||
#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
|
||||
|
||||
/* SDRAM and Static Memory I/O Signals */
|
||||
#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
|
||||
#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
|
||||
#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
|
||||
#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
|
||||
#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
|
||||
|
||||
/* Miscellaneous I/O and DMA Signals */
|
||||
#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
|
||||
#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
|
||||
#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1)
|
||||
|
||||
/* Alternate Bus Master Mode I/O Signals */
|
||||
#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
|
||||
#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
|
||||
#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1)
|
||||
#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1)
|
||||
|
||||
/* PC CARD */
|
||||
#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
|
||||
#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
|
||||
#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
|
||||
#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
|
||||
#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
|
||||
#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
|
||||
#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
|
||||
#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
|
||||
#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
|
||||
#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
|
||||
|
||||
/* FFUART */
|
||||
#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
|
||||
#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
|
||||
#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
|
||||
#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
|
||||
#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
|
||||
#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
|
||||
#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
|
||||
#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
|
||||
|
||||
/* BTUART */
|
||||
#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
|
||||
#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
|
||||
#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
|
||||
#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
|
||||
|
||||
/* STUART */
|
||||
#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
|
||||
#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
|
||||
|
||||
/* HWUART */
|
||||
#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3)
|
||||
#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
|
||||
#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3)
|
||||
#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
|
||||
#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
|
||||
#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1)
|
||||
#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1)
|
||||
#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
|
||||
|
||||
/* FICP */
|
||||
#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
|
||||
#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
|
||||
|
||||
/* PWM 0/1 */
|
||||
#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
|
||||
#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
|
||||
|
||||
/* AC97 */
|
||||
#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
|
||||
#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
|
||||
#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
|
||||
#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
|
||||
#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1)
|
||||
|
||||
/* I2S */
|
||||
#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
|
||||
#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
|
||||
#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
|
||||
#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
|
||||
#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
|
||||
#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
|
||||
|
||||
/* SSP 1 */
|
||||
#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
|
||||
#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
|
||||
#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
|
||||
#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
|
||||
#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1)
|
||||
|
||||
/* SSP 2 - NSSP */
|
||||
#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
|
||||
#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1)
|
||||
#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
|
||||
#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1)
|
||||
#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
|
||||
#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2)
|
||||
#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
|
||||
#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2)
|
||||
|
||||
/* MMC */
|
||||
#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
|
||||
#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
|
||||
#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
|
||||
#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
|
||||
#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
|
||||
#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
|
||||
#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
|
||||
#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
|
||||
#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
|
||||
#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
|
||||
|
||||
/* LCD */
|
||||
#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
|
||||
#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
|
||||
#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
|
||||
#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
|
||||
#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
|
||||
#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
|
||||
#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
|
||||
#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
|
||||
#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
|
||||
#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
|
||||
#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
|
||||
#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
|
||||
#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
|
||||
#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
|
||||
#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
|
||||
#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
|
||||
#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
|
||||
#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
|
||||
#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
|
||||
#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
|
||||
|
||||
#endif /* __ASM_ARCH_MFP_PXA25X_H */
|
||||
431
include/asm-arm/arch-pxa/mfp-pxa27x.h
Normal file
431
include/asm-arm/arch-pxa/mfp-pxa27x.h
Normal file
@ -0,0 +1,431 @@
|
||||
#ifndef __ASM_ARCH_MFP_PXA27X_H
|
||||
#define __ASM_ARCH_MFP_PXA27X_H
|
||||
|
||||
/*
|
||||
* NOTE: for those special-function bidirectional GPIOs, as described
|
||||
* in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
|
||||
* alternative is preserved, the direction is actually selected by the
|
||||
* specific controller, and this should work in most cases.
|
||||
*/
|
||||
|
||||
#include <asm/arch/mfp.h>
|
||||
#include <asm/arch/mfp-pxa2xx.h>
|
||||
|
||||
/* GPIO */
|
||||
#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
|
||||
#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
|
||||
#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0)
|
||||
#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0)
|
||||
#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0)
|
||||
#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0)
|
||||
#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0)
|
||||
#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0)
|
||||
#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0)
|
||||
#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0)
|
||||
#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0)
|
||||
#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0)
|
||||
#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0)
|
||||
#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0)
|
||||
#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0)
|
||||
#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0)
|
||||
#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0)
|
||||
#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0)
|
||||
#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0)
|
||||
#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0)
|
||||
#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0)
|
||||
#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0)
|
||||
#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0)
|
||||
#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0)
|
||||
#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0)
|
||||
#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0)
|
||||
#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0)
|
||||
#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0)
|
||||
#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0)
|
||||
#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0)
|
||||
#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0)
|
||||
#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0)
|
||||
#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0)
|
||||
#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0)
|
||||
#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0)
|
||||
#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0)
|
||||
|
||||
/* Crystal and Clock Signals */
|
||||
#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
|
||||
#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
|
||||
#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
|
||||
#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
|
||||
#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1)
|
||||
|
||||
/* OS Timer Signals */
|
||||
#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1)
|
||||
#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1)
|
||||
#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW)
|
||||
#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
|
||||
#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
|
||||
#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
|
||||
|
||||
/* SDRAM and Static Memory I/O Signals */
|
||||
#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
|
||||
#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
|
||||
#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
|
||||
#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
|
||||
#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
|
||||
#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
|
||||
#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
|
||||
|
||||
/* Miscellaneous I/O and DMA Signals */
|
||||
#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
|
||||
#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
|
||||
#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
|
||||
#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
|
||||
#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
|
||||
#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
|
||||
#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1)
|
||||
#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1)
|
||||
#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2)
|
||||
#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2)
|
||||
#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2)
|
||||
|
||||
/* Alternate Bus Master Mode I/O Signals */
|
||||
#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2)
|
||||
#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2)
|
||||
#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2)
|
||||
#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3)
|
||||
#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
|
||||
#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
|
||||
#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
|
||||
#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
|
||||
|
||||
/* PC CARD */
|
||||
#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
|
||||
#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
|
||||
#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
|
||||
#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
|
||||
#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
|
||||
#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
|
||||
#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1)
|
||||
#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
|
||||
#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
|
||||
#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
|
||||
#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
|
||||
#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
|
||||
#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
|
||||
#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
|
||||
#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
|
||||
|
||||
/* I2C */
|
||||
#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
|
||||
#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1)
|
||||
|
||||
/* FFUART */
|
||||
#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3)
|
||||
#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3)
|
||||
#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
|
||||
#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3)
|
||||
#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1)
|
||||
#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
|
||||
#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2)
|
||||
#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
|
||||
#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
|
||||
#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3)
|
||||
#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3)
|
||||
#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1)
|
||||
#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
|
||||
#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1)
|
||||
#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1)
|
||||
#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1)
|
||||
#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3)
|
||||
#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3)
|
||||
#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
|
||||
#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
|
||||
#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
|
||||
#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
|
||||
#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
|
||||
#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
|
||||
#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
|
||||
#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
|
||||
#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
|
||||
#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
|
||||
#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
|
||||
|
||||
/* BTUART */
|
||||
#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
|
||||
#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
|
||||
#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
|
||||
#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
|
||||
|
||||
/* STUART */
|
||||
#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
|
||||
#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
|
||||
|
||||
/* FICP */
|
||||
#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2)
|
||||
#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
|
||||
#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
|
||||
#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
|
||||
|
||||
/* PWM 0/1/2/3 */
|
||||
#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
|
||||
#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
|
||||
#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
|
||||
#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
|
||||
#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
|
||||
#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
|
||||
#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
|
||||
#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
|
||||
#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
|
||||
#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
|
||||
|
||||
/* AC97 */
|
||||
#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
|
||||
#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
|
||||
#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
|
||||
#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
|
||||
#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
|
||||
#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
|
||||
#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
|
||||
#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
|
||||
#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
|
||||
#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
|
||||
#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
|
||||
#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2)
|
||||
#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2)
|
||||
|
||||
/* I2S */
|
||||
#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
|
||||
#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
|
||||
#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
|
||||
#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
|
||||
#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
|
||||
#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
|
||||
|
||||
/* SSP 1 */
|
||||
#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
|
||||
#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3)
|
||||
#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
|
||||
#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
|
||||
#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2)
|
||||
#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3)
|
||||
#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
|
||||
#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
|
||||
#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
|
||||
#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2)
|
||||
|
||||
/* SSP 2 */
|
||||
#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1)
|
||||
#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3)
|
||||
#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
|
||||
#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2)
|
||||
#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3)
|
||||
#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
|
||||
#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2)
|
||||
#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2)
|
||||
#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
|
||||
#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3)
|
||||
#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
|
||||
#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
|
||||
#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
|
||||
#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
|
||||
#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2)
|
||||
#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
|
||||
#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1)
|
||||
#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1)
|
||||
#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2)
|
||||
#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1)
|
||||
#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1)
|
||||
#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2)
|
||||
#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2)
|
||||
|
||||
/* SSP 3 */
|
||||
#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3)
|
||||
#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
|
||||
#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2)
|
||||
#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1)
|
||||
#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
|
||||
#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3)
|
||||
#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3)
|
||||
#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1)
|
||||
#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
|
||||
#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
|
||||
#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
|
||||
#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3)
|
||||
#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1)
|
||||
#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1)
|
||||
|
||||
/* MMC */
|
||||
#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
|
||||
#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1)
|
||||
#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1)
|
||||
#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1)
|
||||
#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1)
|
||||
#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1)
|
||||
|
||||
/* LCD */
|
||||
#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
|
||||
#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
|
||||
#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
|
||||
#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
|
||||
#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
|
||||
#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
|
||||
#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
|
||||
#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
|
||||
#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
|
||||
#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
|
||||
#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
|
||||
#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
|
||||
#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
|
||||
#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
|
||||
#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
|
||||
#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
|
||||
#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
|
||||
#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
|
||||
#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
|
||||
#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
|
||||
#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
|
||||
#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
|
||||
#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1)
|
||||
#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
|
||||
|
||||
/* Keypad */
|
||||
#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1)
|
||||
#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1)
|
||||
#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1)
|
||||
#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1)
|
||||
#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1)
|
||||
#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1)
|
||||
#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1)
|
||||
#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2)
|
||||
#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1)
|
||||
#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1)
|
||||
#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1)
|
||||
#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2)
|
||||
#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3)
|
||||
#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3)
|
||||
#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3)
|
||||
#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2)
|
||||
#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1)
|
||||
#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1)
|
||||
#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1)
|
||||
#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3)
|
||||
#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1)
|
||||
#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1)
|
||||
#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3)
|
||||
#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3)
|
||||
#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3)
|
||||
#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
|
||||
#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
|
||||
#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
|
||||
#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
|
||||
#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
|
||||
#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
|
||||
#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
|
||||
#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
|
||||
#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
|
||||
#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
|
||||
#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
|
||||
|
||||
/* USB P3 */
|
||||
#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3)
|
||||
#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3)
|
||||
#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
|
||||
#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
|
||||
#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
|
||||
#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3)
|
||||
#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3)
|
||||
#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2)
|
||||
#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2)
|
||||
#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3)
|
||||
|
||||
/* USB P2 */
|
||||
#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
|
||||
#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2)
|
||||
#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
|
||||
#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
|
||||
#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3)
|
||||
#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
|
||||
#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3)
|
||||
#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2)
|
||||
#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2)
|
||||
|
||||
/* USB Host Port 1/2 */
|
||||
#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1)
|
||||
#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
|
||||
#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1)
|
||||
#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
|
||||
|
||||
/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
|
||||
#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2)
|
||||
#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1)
|
||||
#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2)
|
||||
#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2)
|
||||
#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
|
||||
#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1)
|
||||
#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1)
|
||||
#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2)
|
||||
#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3)
|
||||
#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
|
||||
#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3)
|
||||
#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3)
|
||||
#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3)
|
||||
#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1)
|
||||
#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1)
|
||||
#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1)
|
||||
#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1)
|
||||
#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1)
|
||||
#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
|
||||
#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3)
|
||||
#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1)
|
||||
#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2)
|
||||
#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3)
|
||||
#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3)
|
||||
#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3)
|
||||
#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3)
|
||||
#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3)
|
||||
#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3)
|
||||
#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2)
|
||||
#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2)
|
||||
#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2)
|
||||
#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2)
|
||||
#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1)
|
||||
#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1)
|
||||
#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1)
|
||||
#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1)
|
||||
#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1)
|
||||
#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1)
|
||||
#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1)
|
||||
|
||||
/* Universal Subscriber ID Interface */
|
||||
#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
|
||||
#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
|
||||
#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
|
||||
#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
|
||||
#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
|
||||
#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
|
||||
#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
|
||||
#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3)
|
||||
#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
|
||||
#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
|
||||
|
||||
/* Mobile Scalable Link (MSL) Interface */
|
||||
#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
|
||||
#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
|
||||
#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
|
||||
#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
|
||||
#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
|
||||
#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
|
||||
#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2)
|
||||
#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2)
|
||||
#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2)
|
||||
#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2)
|
||||
#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2)
|
||||
#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2)
|
||||
#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2)
|
||||
#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
|
||||
|
||||
/* Memory Stick Host Controller */
|
||||
#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
|
||||
#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2)
|
||||
#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2)
|
||||
#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
|
||||
|
||||
#endif /* __ASM_ARCH_MFP_PXA27X_H */
|
||||
131
include/asm-arm/arch-pxa/mfp-pxa2xx.h
Normal file
131
include/asm-arm/arch-pxa/mfp-pxa2xx.h
Normal file
@ -0,0 +1,131 @@
|
||||
#ifndef __ASM_ARCH_MFP_PXA2XX_H
|
||||
#define __ASM_ARCH_MFP_PXA2XX_H
|
||||
|
||||
#include <asm/arch/mfp.h>
|
||||
|
||||
/*
|
||||
* the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
|
||||
*
|
||||
* MFP_PIN(x)
|
||||
* MFP_AFx
|
||||
* MFP_LPM_DRIVE_{LOW, HIGH}
|
||||
* MFP_LPM_EDGE_x
|
||||
*
|
||||
* other MFP_x bit definitions will be ignored
|
||||
*
|
||||
* and adds the below two bits specifically for pxa2xx:
|
||||
*
|
||||
* bit 23 - Input/Output (PXA2xx specific)
|
||||
* bit 24 - Wakeup Enable(PXA2xx specific)
|
||||
*/
|
||||
|
||||
#define MFP_DIR_IN (0x0 << 23)
|
||||
#define MFP_DIR_OUT (0x1 << 23)
|
||||
#define MFP_DIR_MASK (0x1 << 23)
|
||||
#define MFP_DIR(x) (((x) >> 23) & 0x1)
|
||||
|
||||
#define MFP_LPM_WAKEUP_ENABLE (0x1 << 24)
|
||||
#define WAKEUP_ON_EDGE_RISE (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_RISE)
|
||||
#define WAKEUP_ON_EDGE_FALL (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_FALL)
|
||||
#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_BOTH)
|
||||
|
||||
/* specifically for enabling wakeup on keypad GPIOs */
|
||||
#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_WAKEUP_ENABLE)
|
||||
|
||||
#define MFP_CFG_IN(pin, af) \
|
||||
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
|
||||
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
|
||||
|
||||
/* NOTE: pins configured as output _must_ provide a low power state,
|
||||
* and this state should help to minimize the power dissipation.
|
||||
*/
|
||||
#define MFP_CFG_OUT(pin, af, state) \
|
||||
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
|
||||
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
|
||||
|
||||
/* Common configurations for pxa25x and pxa27x
|
||||
*
|
||||
* Note: pins configured as GPIO are always initialized to input
|
||||
* so not to cause any side effect
|
||||
*/
|
||||
#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0)
|
||||
#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0)
|
||||
#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0)
|
||||
#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0)
|
||||
#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0)
|
||||
#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0)
|
||||
#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0)
|
||||
#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0)
|
||||
#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0)
|
||||
#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0)
|
||||
#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0)
|
||||
#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0)
|
||||
#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0)
|
||||
#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0)
|
||||
#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0)
|
||||
#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0)
|
||||
#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0)
|
||||
#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0)
|
||||
#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0)
|
||||
#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0)
|
||||
#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0)
|
||||
#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0)
|
||||
#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0)
|
||||
#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0)
|
||||
#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0)
|
||||
#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0)
|
||||
#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0)
|
||||
#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0)
|
||||
#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0)
|
||||
#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0)
|
||||
#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0)
|
||||
#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0)
|
||||
#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0)
|
||||
#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0)
|
||||
#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0)
|
||||
#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0)
|
||||
#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0)
|
||||
#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0)
|
||||
#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0)
|
||||
#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0)
|
||||
#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0)
|
||||
#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0)
|
||||
#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0)
|
||||
#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0)
|
||||
#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0)
|
||||
#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0)
|
||||
#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0)
|
||||
#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0)
|
||||
#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0)
|
||||
#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0)
|
||||
#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0)
|
||||
#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0)
|
||||
#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0)
|
||||
#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0)
|
||||
#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0)
|
||||
#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0)
|
||||
#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0)
|
||||
#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0)
|
||||
#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0)
|
||||
#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0)
|
||||
#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0)
|
||||
#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0)
|
||||
#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0)
|
||||
#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0)
|
||||
#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0)
|
||||
#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0)
|
||||
#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0)
|
||||
#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0)
|
||||
#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0)
|
||||
#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0)
|
||||
#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0)
|
||||
#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0)
|
||||
#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0)
|
||||
#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0)
|
||||
#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0)
|
||||
#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0)
|
||||
#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0)
|
||||
#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0)
|
||||
|
||||
extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
|
||||
#endif /* __ASM_ARCH_MFP_PXA2XX_H */
|
||||
Loading…
Reference in New Issue
Block a user