This pull request contains Broadcom ARM/ARM64 based SoCs drivers changes for

4.16, please pull the following:
 
 - Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
   print the time to make it more future proof
 
 - Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
   work on newer ARM64-based chips, as well as perform the correct interface tuning
   for these chips to reach the expected performance
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJaPE0dAAoJEIfQlpxEBwcEk/oQALjUzNWkipO31Ahx35r7kblW
 4RC39ebaU31fR6yMOlKWQGh/uklHopcDuRQHAGR7IHg2MSr/uQ/xb7rgz4Qa1ZTD
 gRPcT9rI2mNctiWLFoB3EaYmA0J3EOMJI1GMIvHPGc3WZ5Y4FHKICW3qK7mvGndc
 obmiAU4mFyK31SKKm8k+TX6bzPsr1ZEm2tW9kRkWKfGk05DVD+KsKa5Xvn0USlS4
 0jiXo+naHv5KtYXSuSc+Kg0qcCB3K2SFJVAOPgjTMzo498Vcv6mWLQPfGg3vDmCt
 3rEiDhPoJJ6soAuG2OmHQCykTr0uwRZNhOc385JCKf8TP8CjV8aK71lJe0oFQgtg
 nC67z+uVLJ3tXoI1Y0V0DQXCTNLKgsbU19p14S+rDM2MQ41yGzWoVdT9ZhEDEbyj
 sDeC+d9DVQTuXqImqe16M3oZSsCWuMCRz0LG2uDhoTHMNmegU//nY6VhVR7ia0Ia
 BIDCsbNf1KEDEUi1v5nPJSNC2Oyk/mVOPzl8xwMdw3VV4eYggC9aqljmwDWWCxV5
 GNCGbP/0UgKG6iUadqK2HM+0syRWA5E3ypWg8VPtU6g+lZKYqnh6g23F4lJklE1U
 WhKKK52OCRZ0w/ut2TWJmhpmn+CfR7VcVv9IS9zElBbyU/fg27Mkpu/Ty7bBx0my
 kmCDHOGHZyl4jrKhwxGg
 =RHHM
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux into next/drivers

This pull request contains Broadcom ARM/ARM64 based SoCs drivers changes for
4.16, please pull the following:

- Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
  print the time to make it more future proof

- Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
  work on newer ARM64-based chips, as well as perform the correct interface tuning
  for these chips to reach the expected performance

* tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux:
  soc: brcmstb: biuctrl: Move to early_initcall
  soc: brcmstb: Split initialization
  soc: brcmstb: biuctrl: Fine tune B53 MCP interface settings
  soc: brcmstb: biuctrl: Wire-up new registers
  soc: brcmstb: biuctrl: Prepare for saving/restoring other registers
  soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs
  soc: brcmstb: Make CPU credit offset more parameterized
  dt-bindings: arm: brcmstb: Correct BIUCTRL node documentation
  dt-bindings: arm: Add entry for Broadcom Brahma-B53
  firmware: raspberrypi: print time using time64_t

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt

@@ -17,21 +17,23 @@ Further, syscon nodes that map platform-specific registers used for general
 system control is required:
 
     - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
-    - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-cpu-biu-ctrl",
+		  "brcm,brcmstb-cpu-biu-ctrl",
+		  "syscon"
     - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
 
-hif-cpubiuctrl node
+cpu-biu-ctrl node
 -------------------
-SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit
-(BIU) block which controls and interfaces the CPU complex to the different
-Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block
-offers a feature called Write Pairing which consists in collapsing two adjacent
-cache lines into a single (bursted) write transaction towards the memory
-controller (MEMC) to maximize write bandwidth.
+SoCs with Broadcom Brahma15 ARM-based and Brahma53 ARM64-based CPUs have a
+specific Bus Interface Unit (BIU) block which controls and interfaces the CPU
+complex to the different Memory Controller Ports (MCP), one per memory
+controller (MEMC). This BIU block offers a feature called Write Pairing which
+consists in collapsing two adjacent cache lines into a single (bursted) write
+transaction towards the memory controller (MEMC) to maximize write bandwidth.
 
 Required properties:
 
-    - compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon"
+    - compatible: must be "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon"
 
 Optional properties:
 
@@ -52,7 +54,7 @@ example:
         };
 
         hif_cpubiuctrl: syscon@3e2400 {
-            compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+            compatible = "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon";
             reg = <0x3e2400 0x5b4>;
             brcm,write-pairing;
         };

Documentation/devicetree/bindings/arm/cpus.txt

@@ -169,6 +169,7 @@ described below.
 			    "arm,cortex-r5"
 			    "arm,cortex-r7"
 			    "brcm,brahma-b15"
+			    "brcm,brahma-b53"
 			    "brcm,vulcan"
 			    "cavium,thunder"
 			    "cavium,thunder2"

arch/arm/mach-bcm/brcmstb.c

@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <linux/soc/brcmstb/brcmstb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -38,7 +37,6 @@ u32 brcmstb_uart_config[3] = {
 static void __init brcmstb_init_irq(void)
 {
 	irqchip_init();
-	brcmstb_biuctrl_init();
 }
 
 static const char *const brcmstb_match[] __initconst = {

drivers/firmware/raspberrypi.c

@@ -174,7 +174,7 @@ rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
 	if (ret == 0) {
 		struct tm tm;
 
-		time_to_tm(packet, 0, &tm);
+		time64_to_tm(packet, 0, &tm);
 
 		dev_info(fw->cl.dev,
 			 "Attached to firmware from %04ld-%02d-%02d %02d:%02d\n",

drivers/soc/bcm/brcmstb/biuctrl.c

@@ -21,11 +21,70 @@
 #include <linux/syscore_ops.h>
 #include <linux/soc/brcmstb/brcmstb.h>
 
-#define CPU_CREDIT_REG_OFFSET			0x184
 #define  CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK	0x70000000
+#define CPU_CREDIT_REG_MCPx_READ_CRED_MASK	0xf
+#define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK	0xf
+#define CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(x)	((x) * 8)
+#define CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(x)	(((x) * 8) + 4)
+
+#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(x)	((x) * 8)
+#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK		0xff
+
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK	0xf
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK		0xf
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT	4
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE		BIT(8)
 
 static void __iomem *cpubiuctrl_base;
 static bool mcp_wr_pairing_en;
+static const int *cpubiuctrl_regs;
+
+static inline u32 cbc_readl(int reg)
+{
+	int offset = cpubiuctrl_regs[reg];
+
+	if (offset == -1)
+		return (u32)-1;
+
+	return readl_relaxed(cpubiuctrl_base + offset);
+}
+
+static inline void cbc_writel(u32 val, int reg)
+{
+	int offset = cpubiuctrl_regs[reg];
+
+	if (offset == -1)
+		return;
+
+	writel_relaxed(val,  cpubiuctrl_base + offset);
+}
+
+enum cpubiuctrl_regs {
+	CPU_CREDIT_REG = 0,
+	CPU_MCP_FLOW_REG,
+	CPU_WRITEBACK_CTRL_REG
+};
+
+static const int b15_cpubiuctrl_regs[] = {
+	[CPU_CREDIT_REG] = 0x184,
+	[CPU_MCP_FLOW_REG] = -1,
+	[CPU_WRITEBACK_CTRL_REG] = -1,
+};
+
+/* Odd cases, e.g: 7260 */
+static const int b53_cpubiuctrl_no_wb_regs[] = {
+	[CPU_CREDIT_REG] = 0x0b0,
+	[CPU_MCP_FLOW_REG] = 0x0b4,
+	[CPU_WRITEBACK_CTRL_REG] = -1,
+};
+
+static const int b53_cpubiuctrl_regs[] = {
+	[CPU_CREDIT_REG] = 0x0b0,
+	[CPU_MCP_FLOW_REG] = 0x0b4,
+	[CPU_WRITEBACK_CTRL_REG] = 0x22c,
+};
+
+#define NUM_CPU_BIUCTRL_REGS	3
 
 static int __init mcp_write_pairing_set(void)
 {
@@ -34,15 +93,15 @@ static int __init mcp_write_pairing_set(void)
 	if (!cpubiuctrl_base)
 		return -1;
 
-	creds = readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+	creds = cbc_readl(CPU_CREDIT_REG);
 	if (mcp_wr_pairing_en) {
 		pr_info("MCP: Enabling write pairing\n");
-		writel_relaxed(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
-			     cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+		cbc_writel(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+			   CPU_CREDIT_REG);
 	} else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) {
 		pr_info("MCP: Disabling write pairing\n");
-		writel_relaxed(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
-				cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+		cbc_writel(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+			   CPU_CREDIT_REG);
 	} else {
 		pr_info("MCP: Write pairing already disabled\n");
 	}
@@ -50,9 +109,62 @@ static int __init mcp_write_pairing_set(void)
 	return 0;
 }
 
+static const u32 b53_mach_compat[] = {
+	0x7268,
+	0x7271,
+	0x7278,
+};
+
+static void __init mcp_b53_set(void)
+{
+	unsigned int i;
+	u32 reg;
+
+	reg = brcmstb_get_family_id();
+
+	for (i = 0; i < ARRAY_SIZE(b53_mach_compat); i++) {
+		if (BRCM_ID(reg) == b53_mach_compat[i])
+			break;
+	}
+
+	if (i == ARRAY_SIZE(b53_mach_compat))
+		return;
+
+	/* Set all 3 MCP interfaces to 8 credits */
+	reg = cbc_readl(CPU_CREDIT_REG);
+	for (i = 0; i < 3; i++) {
+		reg &= ~(CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK <<
+			 CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i));
+		reg &= ~(CPU_CREDIT_REG_MCPx_READ_CRED_MASK <<
+			 CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i));
+		reg |= 8 << CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i);
+		reg |= 8 << CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i);
+	}
+	cbc_writel(reg, CPU_CREDIT_REG);
+
+	/* Max out the number of in-flight Jwords reads on the MCP interface */
+	reg = cbc_readl(CPU_MCP_FLOW_REG);
+	for (i = 0; i < 3; i++)
+		reg |= CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK <<
+			CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(i);
+	cbc_writel(reg, CPU_MCP_FLOW_REG);
+
+	/* Enable writeback throttling, set timeout to 128 cycles, 256 cycles
+	 * threshold
+	 */
+	reg = cbc_readl(CPU_WRITEBACK_CTRL_REG);
+	reg |= CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE;
+	reg &= ~CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK;
+	reg &= ~(CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK <<
+		 CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT);
+	reg |= 8;
+	reg |= 7 << CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT;
+	cbc_writel(reg, CPU_WRITEBACK_CTRL_REG);
+}
+
 static int __init setup_hifcpubiuctrl_regs(void)
 {
-	struct device_node *np;
+	struct device_node *np, *cpu_dn;
 	int ret = 0;
 
 	np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
@@ -69,27 +181,56 @@ static int __init setup_hifcpubiuctrl_regs(void)
 	}
 
 	mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");
+
+	cpu_dn = of_get_cpu_node(0, NULL);
+	if (!cpu_dn) {
+		pr_err("failed to obtain CPU device node\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15"))
+		cpubiuctrl_regs = b15_cpubiuctrl_regs;
+	else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53"))
+		cpubiuctrl_regs = b53_cpubiuctrl_regs;
+	else {
+		pr_err("unsupported CPU\n");
+		ret = -EINVAL;
+	}
+	of_node_put(cpu_dn);
+
+	if (BRCM_ID(brcmstb_get_family_id()) == 0x7260)
+		cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs;
 out:
 	of_node_put(np);
 	return ret;
 }
 
 #ifdef CONFIG_PM_SLEEP
-static u32 cpu_credit_reg_dump;  /* for save/restore */
+static u32 cpubiuctrl_reg_save[NUM_CPU_BIUCTRL_REGS];
 
 static int brcmstb_cpu_credit_reg_suspend(void)
 {
-	if (cpubiuctrl_base)
-		cpu_credit_reg_dump =
-			readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+	unsigned int i;
+
+	if (!cpubiuctrl_base)
+		return 0;
+
+	for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++)
+		cpubiuctrl_reg_save[i] = cbc_readl(i);
+
 	return 0;
 }
 
 static void brcmstb_cpu_credit_reg_resume(void)
 {
-	if (cpubiuctrl_base)
-		writel_relaxed(cpu_credit_reg_dump,
-				cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+	unsigned int i;
+
+	if (!cpubiuctrl_base)
+		return;
+
+	for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++)
+		cbc_writel(cpubiuctrl_reg_save[i], i);
 }
 
 static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
@@ -99,7 +240,7 @@ static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
 #endif
 
 
-void __init brcmstb_biuctrl_init(void)
+static int __init brcmstb_biuctrl_init(void)
 {
 	int ret;
 
@@ -108,10 +249,13 @@ void __init brcmstb_biuctrl_init(void)
 	ret = mcp_write_pairing_set();
 	if (ret) {
 		pr_err("MCP: Unable to disable write pairing!\n");
-		return;
+		return ret;
 	}
 
+	mcp_b53_set();
 #ifdef CONFIG_PM_SLEEP
 	register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
 #endif
+	return 0;
 }
+early_initcall(brcmstb_biuctrl_init);

drivers/soc/bcm/brcmstb/common.c

@@ -66,13 +66,10 @@ static const struct of_device_id sun_top_ctrl_match[] = {
 	{ }
 };
 
-static int __init brcmstb_soc_device_init(void)
+static int __init brcmstb_soc_device_early_init(void)
 {
-	struct soc_device_attribute *soc_dev_attr;
-	struct soc_device *soc_dev;
 	struct device_node *sun_top_ctrl;
 	void __iomem *sun_top_ctrl_base;
-	int ret = 0;
 
 	sun_top_ctrl = of_find_matching_node(NULL, sun_top_ctrl_match);
 	if (!sun_top_ctrl)
@@ -84,12 +81,19 @@ static int __init brcmstb_soc_device_init(void)
 
 	family_id = readl(sun_top_ctrl_base);
 	product_id = readl(sun_top_ctrl_base + 0x4);
+	iounmap(sun_top_ctrl_base);
+	return 0;
+}
+early_initcall(brcmstb_soc_device_early_init);
+
+static int __init brcmstb_soc_device_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!soc_dev_attr)
+		return -ENOMEM;
 
 	soc_dev_attr->family = kasprintf(GFP_KERNEL, "%x",
 					 family_id >> 28 ?
@@ -107,14 +111,9 @@ static int __init brcmstb_soc_device_init(void)
 		kfree(soc_dev_attr->soc_id);
 		kfree(soc_dev_attr->revision);
 		kfree(soc_dev_attr);
-		ret = -ENODEV;
-		goto out;
+		return -ENOMEM;
 	}
 
 	return 0;
-
-out:
-	iounmap(sun_top_ctrl_base);
-	return ret;
 }
 arch_initcall(brcmstb_soc_device_init);

include/linux/soc/brcmstb/brcmstb.h

@@ -12,12 +12,6 @@ static inline u32 BRCM_REV(u32 reg)
 	return reg & 0xff;
 }
 
-/*
- * Bus Interface Unit control register setup, must happen early during boot,
- * before SMP is brought up, called by machine entry point.
- */
-void brcmstb_biuctrl_init(void);
-
 /*
  * Helper functions for getting family or product id from the
  * SoC driver.