mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 22:30:54 +07:00
[ARM] 5407/1: SA1100: drop broken for ages iPAQ h3800 support
Code has never been in buildable state since initial merge. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Dmitry Artamonow
Russell King
parent
1c7880dffc
commit
7bc35b56f3
@ -1093,7 +1093,7 @@ source "drivers/cpufreq/Kconfig"
|
||||
|
||||
config CPU_FREQ_SA1100
|
||||
bool
|
||||
depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
|
||||
depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
|
||||
default y
|
||||
|
||||
config CPU_FREQ_SA1110
|
||||
|
||||
@ -71,19 +71,9 @@ config SA1100_H3600
|
||||
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
|
||||
<http://www.compaq.com/products/handhelds/pocketpc/>
|
||||
|
||||
config SA1100_H3800
|
||||
bool "Compaq iPAQ H3800"
|
||||
help
|
||||
Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
|
||||
series handheld computer. Information about this machine and the
|
||||
Linux port to this machine can be found at:
|
||||
|
||||
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
|
||||
<http://www.compaq.com/products/handhelds/pocketpc/>
|
||||
|
||||
config SA1100_H3XXX
|
||||
bool
|
||||
depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
|
||||
depends on SA1100_H3100 || SA1100_H3600
|
||||
default y
|
||||
|
||||
config SA1100_BADGE4
|
||||
|
||||
@ -42,14 +42,7 @@
|
||||
#include <asm/mach/serial_sa1100.h>
|
||||
|
||||
#include <mach/h3600.h>
|
||||
|
||||
#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
|
||||
#include <mach/h3600_gpio.h>
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SA1100_H3800
|
||||
#include <mach/h3600_asic.h>
|
||||
#endif
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
@ -519,388 +512,3 @@ MACHINE_END
|
||||
|
||||
#endif /* CONFIG_SA1100_H3600 */
|
||||
|
||||
#ifdef CONFIG_SA1100_H3800
|
||||
|
||||
#define SET_ASIC1(x) \
|
||||
do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
|
||||
|
||||
#define SET_ASIC2(x) \
|
||||
do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
|
||||
|
||||
#define CLEAR_ASIC1(x) \
|
||||
do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
|
||||
|
||||
#define CLEAR_ASIC2(x) \
|
||||
do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
|
||||
|
||||
|
||||
/*
|
||||
On screen enable, we get
|
||||
|
||||
h3800_video_power_on(1)
|
||||
LCD controller starts
|
||||
h3800_video_lcd_enable(1)
|
||||
|
||||
On screen disable, we get
|
||||
|
||||
h3800_video_lcd_enable(0)
|
||||
LCD controller stops
|
||||
h3800_video_power_on(0)
|
||||
*/
|
||||
|
||||
|
||||
static void h3800_video_power_on(int setp)
|
||||
{
|
||||
if (setp) {
|
||||
H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
|
||||
msleep(30);
|
||||
H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
|
||||
msleep(5);
|
||||
H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
|
||||
msleep(50);
|
||||
H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
|
||||
msleep(5);
|
||||
} else {
|
||||
msleep(5);
|
||||
H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
|
||||
msleep(50);
|
||||
H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
|
||||
msleep(5);
|
||||
H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
|
||||
msleep(100);
|
||||
H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
|
||||
}
|
||||
}
|
||||
|
||||
static void h3800_video_lcd_enable(int setp)
|
||||
{
|
||||
if (setp) {
|
||||
msleep(17); // Wait one from before turning on
|
||||
H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
|
||||
} else {
|
||||
H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
|
||||
msleep(30); // Wait before turning off
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
|
||||
{
|
||||
switch (x) {
|
||||
case IPAQ_EGPIO_LCD_POWER:
|
||||
h3800_video_power_on(setp);
|
||||
break;
|
||||
case IPAQ_EGPIO_LCD_ENABLE:
|
||||
h3800_video_lcd_enable(setp);
|
||||
break;
|
||||
case IPAQ_EGPIO_CODEC_NRESET:
|
||||
case IPAQ_EGPIO_AUDIO_ON:
|
||||
case IPAQ_EGPIO_QMUTE:
|
||||
printk("%s: error - should not be called\n", __func__);
|
||||
break;
|
||||
case IPAQ_EGPIO_OPT_NVRAM_ON:
|
||||
SET_ASIC2(GPIO2_OPT_ON_NVRAM);
|
||||
break;
|
||||
case IPAQ_EGPIO_OPT_ON:
|
||||
SET_ASIC2(GPIO2_OPT_ON);
|
||||
break;
|
||||
case IPAQ_EGPIO_CARD_RESET:
|
||||
SET_ASIC2(GPIO2_OPT_PCM_RESET);
|
||||
break;
|
||||
case IPAQ_EGPIO_OPT_RESET:
|
||||
SET_ASIC2(GPIO2_OPT_RESET);
|
||||
break;
|
||||
case IPAQ_EGPIO_IR_ON:
|
||||
CLEAR_ASIC1(GPIO1_IR_ON_N);
|
||||
break;
|
||||
case IPAQ_EGPIO_IR_FSEL:
|
||||
break;
|
||||
case IPAQ_EGPIO_RS232_ON:
|
||||
SET_ASIC1(GPIO1_RS232_ON);
|
||||
break;
|
||||
case IPAQ_EGPIO_VPP_ON:
|
||||
H3800_ASIC2_FlashWP_VPP_ON = setp;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static unsigned long h3800_read_egpio(void)
|
||||
{
|
||||
return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
|
||||
}
|
||||
|
||||
/* We need to fix ASIC2 GPIO over suspend/resume. At the moment,
|
||||
it doesn't appear that ASIC1 GPIO has the same problem */
|
||||
|
||||
static int h3800_pm_callback(int req)
|
||||
{
|
||||
static u16 asic1_data;
|
||||
static u16 asic2_data;
|
||||
int result = 0;
|
||||
|
||||
printk("%s %d\n", __func__, req);
|
||||
|
||||
switch (req) {
|
||||
case PM_RESUME:
|
||||
MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */
|
||||
|
||||
H3800_ASIC2_GPIOPIOD = asic2_data;
|
||||
H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
|
||||
| GPIO2_SD_DETECT
|
||||
| GPIO2_EAR_IN_N
|
||||
| GPIO2_USB_DETECT_N
|
||||
| GPIO2_SD_CON_SLT;
|
||||
|
||||
H3800_ASIC1_GPIO_OUT = asic1_data;
|
||||
|
||||
if (ipaq_model_ops.pm_callback_aux)
|
||||
result = ipaq_model_ops.pm_callback_aux(req);
|
||||
break;
|
||||
|
||||
case PM_SUSPEND:
|
||||
if (ipaq_model_ops.pm_callback_aux &&
|
||||
((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
|
||||
return result;
|
||||
|
||||
asic1_data = H3800_ASIC1_GPIO_OUT;
|
||||
asic2_data = H3800_ASIC2_GPIOPIOD;
|
||||
break;
|
||||
default:
|
||||
printk("%s: unrecognized PM callback\n", __func__);
|
||||
break;
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
static struct ipaq_model_ops h3800_model_ops __initdata = {
|
||||
.generic_name = "3800",
|
||||
.control = h3800_control_egpio,
|
||||
.read = h3800_read_egpio,
|
||||
.pm_callback = h3800_pm_callback
|
||||
};
|
||||
|
||||
#define MAX_ASIC_ISR_LOOPS 20
|
||||
|
||||
/* The order of these is important - see #include <mach/irqs.h> */
|
||||
static u32 kpio_irq_mask[] = {
|
||||
KPIO_KEY_ALL,
|
||||
KPIO_SPI_INT,
|
||||
KPIO_OWM_INT,
|
||||
KPIO_ADC_INT,
|
||||
KPIO_UART_0_INT,
|
||||
KPIO_UART_1_INT,
|
||||
KPIO_TIMER_0_INT,
|
||||
KPIO_TIMER_1_INT,
|
||||
KPIO_TIMER_2_INT
|
||||
};
|
||||
|
||||
static u32 gpio_irq_mask[] = {
|
||||
GPIO2_PEN_IRQ,
|
||||
GPIO2_SD_DETECT,
|
||||
GPIO2_EAR_IN_N,
|
||||
GPIO2_USB_DETECT_N,
|
||||
GPIO2_SD_CON_SLT,
|
||||
};
|
||||
|
||||
static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (0) printk("%s: interrupt received\n", __func__);
|
||||
|
||||
desc->chip->ack(irq);
|
||||
|
||||
for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
|
||||
u32 irq;
|
||||
int j;
|
||||
|
||||
/* KPIO */
|
||||
irq = H3800_ASIC2_KPIINTFLAG;
|
||||
if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
|
||||
for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
|
||||
if (irq & kpio_irq_mask[j])
|
||||
handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
|
||||
|
||||
/* GPIO2 */
|
||||
irq = H3800_ASIC2_GPIINTFLAG;
|
||||
if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
|
||||
for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
|
||||
if (irq & gpio_irq_mask[j])
|
||||
handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
|
||||
}
|
||||
|
||||
if (i >= MAX_ASIC_ISR_LOOPS)
|
||||
printk("%s: interrupt processing overrun\n", __func__);
|
||||
|
||||
/* For level-based interrupts */
|
||||
desc->chip->unmask(irq);
|
||||
|
||||
}
|
||||
|
||||
static struct irqaction h3800_irq = {
|
||||
.name = "h3800_asic",
|
||||
.handler = h3800_IRQ_demux,
|
||||
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
||||
};
|
||||
|
||||
u32 kpio_int_shadow = 0;
|
||||
|
||||
|
||||
/* mask_ack <- IRQ is first serviced.
|
||||
mask <- IRQ is disabled.
|
||||
unmask <- IRQ is enabled
|
||||
|
||||
The INTCLR registers are poorly documented. I believe that writing
|
||||
a "1" to the register clears the specific interrupt, but the documentation
|
||||
indicates writing a "0" clears the interrupt. In any case, they shouldn't
|
||||
be read (that's the INTFLAG register)
|
||||
*/
|
||||
|
||||
static void h3800_mask_ack_kpio_irq(unsigned int irq)
|
||||
{
|
||||
u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
|
||||
kpio_int_shadow &= ~mask;
|
||||
H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
|
||||
H3800_ASIC2_KPIINTCLR = mask;
|
||||
}
|
||||
|
||||
static void h3800_mask_kpio_irq(unsigned int irq)
|
||||
{
|
||||
u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
|
||||
kpio_int_shadow &= ~mask;
|
||||
H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
|
||||
}
|
||||
|
||||
static void h3800_unmask_kpio_irq(unsigned int irq)
|
||||
{
|
||||
u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
|
||||
kpio_int_shadow |= mask;
|
||||
H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
|
||||
}
|
||||
|
||||
static void h3800_mask_ack_gpio_irq(unsigned int irq)
|
||||
{
|
||||
u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
|
||||
H3800_ASIC2_GPIINTSTAT &= ~mask;
|
||||
H3800_ASIC2_GPIINTCLR = mask;
|
||||
}
|
||||
|
||||
static void h3800_mask_gpio_irq(unsigned int irq)
|
||||
{
|
||||
u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
|
||||
H3800_ASIC2_GPIINTSTAT &= ~mask;
|
||||
}
|
||||
|
||||
static void h3800_unmask_gpio_irq(unsigned int irq)
|
||||
{
|
||||
u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
|
||||
H3800_ASIC2_GPIINTSTAT |= mask;
|
||||
}
|
||||
|
||||
static void __init h3800_init_irq(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* Initialize standard IRQs */
|
||||
sa1100_init_irq();
|
||||
|
||||
/* Disable all IRQs and set up clock */
|
||||
H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */
|
||||
H3800_ASIC2_GPIINTSTAT = 0;
|
||||
|
||||
H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */
|
||||
H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */
|
||||
|
||||
// H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */
|
||||
// H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */
|
||||
|
||||
H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */
|
||||
H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
|
||||
H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
|
||||
H3800_ASIC2_INTR_TimerSet = 1;
|
||||
|
||||
#if 0
|
||||
for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
|
||||
int irq = i + H3800_KPIO_IRQ_START;
|
||||
irq_desc[irq].valid = 1;
|
||||
irq_desc[irq].probe_ok = 1;
|
||||
set_irq_chip(irq, &h3800_kpio_irqchip);
|
||||
}
|
||||
|
||||
for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
|
||||
int irq = i + H3800_GPIO_IRQ_START;
|
||||
irq_desc[irq].valid = 1;
|
||||
irq_desc[irq].probe_ok = 1;
|
||||
set_irq_chip(irq, &h3800_gpio_irqchip);
|
||||
}
|
||||
#endif
|
||||
set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
|
||||
set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
|
||||
}
|
||||
|
||||
|
||||
#define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */
|
||||
|
||||
static void __init h3800_map_io(void)
|
||||
{
|
||||
h3xxx_map_io();
|
||||
|
||||
/* Add wakeup on AC plug/unplug */
|
||||
PWER |= PWER_GPIO12;
|
||||
|
||||
/* Initialize h3800-specific values here */
|
||||
GPCR = 0x0fffffff; /* All outputs are set low by default */
|
||||
GAFR = GPIO_H3800_CLK_OUT |
|
||||
GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
|
||||
GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
|
||||
GPDR = GPIO_H3800_CLK_OUT |
|
||||
GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
|
||||
GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
|
||||
GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
|
||||
GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
|
||||
TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */
|
||||
|
||||
/* Fix the memory bus */
|
||||
MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
|
||||
|
||||
/* Set up ASIC #1 */
|
||||
H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */
|
||||
H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */
|
||||
H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS;
|
||||
H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS;
|
||||
H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N;
|
||||
H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
|
||||
H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
|
||||
|
||||
H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
|
||||
| GPIO1_RS232_ON
|
||||
| GPIO1_EAR_ON_N;
|
||||
|
||||
/* Set up ASIC #2 */
|
||||
H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
|
||||
H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
|
||||
|
||||
H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
|
||||
| GPIO2_SD_DETECT
|
||||
| GPIO2_EAR_IN_N
|
||||
| GPIO2_USB_DETECT_N
|
||||
| GPIO2_SD_CON_SLT;
|
||||
|
||||
/* TODO : Set sleep states & battery fault states */
|
||||
|
||||
/* Clear VPP Enable */
|
||||
H3800_ASIC2_FlashWP_VPP_ON = 0;
|
||||
ipaq_model_ops = h3800_model_ops;
|
||||
}
|
||||
|
||||
MACHINE_START(H3800, "Compaq iPAQ H3800")
|
||||
.phys_io = 0x80000000,
|
||||
.io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xc0000100,
|
||||
.map_io = h3800_map_io,
|
||||
.init_irq = h3800_init_irq,
|
||||
.timer = &sa1100_timer,
|
||||
.init_machine = h3xxx_mach_init,
|
||||
MACHINE_END
|
||||
|
||||
#endif /* CONFIG_SA1100_H3800 */
|
||||
|
||||
@ -29,7 +29,7 @@ typedef int __bitwise pm_request_t;
|
||||
#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
|
||||
|
||||
/* generalized support for H3xxx series Compaq Pocket PC's */
|
||||
#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
|
||||
#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
|
||||
|
||||
/* Physical memory regions corresponding to chip selects */
|
||||
#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
|
||||
|
||||
@ -48,22 +48,11 @@
|
||||
#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22)
|
||||
#define GPIO_H3600_OPT_DET GPIO_GPIO (27)
|
||||
|
||||
/* H3800 specific pins */
|
||||
#define GPIO_H3800_AC_IN GPIO_GPIO (12)
|
||||
#define GPIO_H3800_COM_DSR GPIO_GPIO (13)
|
||||
#define GPIO_H3800_MMC_INT GPIO_GPIO (18)
|
||||
#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */
|
||||
#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22)
|
||||
#define GPIO_H3800_CLK_OUT GPIO_GPIO (27)
|
||||
|
||||
/****************************************************/
|
||||
|
||||
#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
|
||||
#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
|
||||
|
||||
#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18
|
||||
#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */
|
||||
|
||||
/* H3100 / 3600 EGPIO pins */
|
||||
#define EGPIO_H3600_VPP_ON (1 << 0)
|
||||
#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
|
||||
@ -84,457 +73,5 @@
|
||||
#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
|
||||
#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
|
||||
|
||||
/********************* H3800, ASIC #2 ********************/
|
||||
|
||||
#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT)
|
||||
#define H3800_ASIC2_OFFSET(s,x,y) \
|
||||
(*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
|
||||
#define H3800_ASIC2_NOFFSET(s,x,n,y) \
|
||||
(*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
|
||||
|
||||
#define _H3800_ASIC2_GPIO_Base 0x0000
|
||||
#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */
|
||||
#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
|
||||
#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
|
||||
#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
|
||||
#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */
|
||||
#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */
|
||||
#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */
|
||||
#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
|
||||
#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */
|
||||
#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */
|
||||
|
||||
#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction )
|
||||
#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
|
||||
#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
|
||||
#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
|
||||
#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
|
||||
#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
|
||||
#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data )
|
||||
#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
|
||||
#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
|
||||
#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
|
||||
|
||||
#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */
|
||||
#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */
|
||||
#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */
|
||||
#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */
|
||||
#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */
|
||||
#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */
|
||||
#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */
|
||||
#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */
|
||||
#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */
|
||||
#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */
|
||||
#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */
|
||||
#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */
|
||||
|
||||
#define _H3800_ASIC2_KPIO_Base 0x0200
|
||||
#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */
|
||||
#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
|
||||
#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
|
||||
#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
|
||||
#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */
|
||||
#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */
|
||||
#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */
|
||||
#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
|
||||
#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */
|
||||
#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */
|
||||
|
||||
#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction )
|
||||
#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
|
||||
#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
|
||||
#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
|
||||
#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
|
||||
#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
|
||||
#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data )
|
||||
#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
|
||||
#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
|
||||
#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
|
||||
|
||||
#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 )
|
||||
#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 )
|
||||
#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 )
|
||||
#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 )
|
||||
#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 )
|
||||
#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 )
|
||||
#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 )
|
||||
#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 )
|
||||
|
||||
#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */
|
||||
#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */
|
||||
#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */
|
||||
#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */
|
||||
#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */
|
||||
#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */
|
||||
#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */
|
||||
#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */
|
||||
#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */
|
||||
#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */
|
||||
#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */
|
||||
#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */
|
||||
|
||||
/* Alternate KPIO functions (set by default) */
|
||||
#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */
|
||||
#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */
|
||||
#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */
|
||||
#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */
|
||||
#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */
|
||||
|
||||
#define _H3800_ASIC2_SPI_Base 0x0400
|
||||
#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */
|
||||
|
||||
#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control )
|
||||
#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data )
|
||||
#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
|
||||
|
||||
#define _H3800_ASIC2_PWM_0_Base 0x0600
|
||||
#define _H3800_ASIC2_PWM_1_Base 0x0700
|
||||
#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */
|
||||
#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */
|
||||
#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */
|
||||
|
||||
#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase )
|
||||
#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
|
||||
#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
|
||||
|
||||
#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase )
|
||||
#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
|
||||
#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
|
||||
|
||||
#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */
|
||||
#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */
|
||||
#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */
|
||||
|
||||
#define _H3800_ASIC2_LED_0_Base 0x0800
|
||||
#define _H3800_ASIC2_LED_1_Base 0x0880
|
||||
#define _H3800_ASIC2_LED_2_Base 0x0900
|
||||
#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */
|
||||
#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */
|
||||
#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */
|
||||
#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */
|
||||
|
||||
#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase )
|
||||
#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
|
||||
#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
|
||||
#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
|
||||
|
||||
#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase )
|
||||
#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
|
||||
#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
|
||||
#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
|
||||
|
||||
#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase )
|
||||
#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
|
||||
#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
|
||||
#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
|
||||
|
||||
#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */
|
||||
#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */
|
||||
#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 )
|
||||
#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */
|
||||
|
||||
#define _H3800_ASIC2_UART_0_Base 0x0A00
|
||||
#define _H3800_ASIC2_UART_1_Base 0x0C00
|
||||
#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */
|
||||
#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */
|
||||
#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */
|
||||
|
||||
#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive )
|
||||
#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit )
|
||||
#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable )
|
||||
#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify )
|
||||
#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl )
|
||||
#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl )
|
||||
#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus )
|
||||
#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus )
|
||||
#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad )
|
||||
#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL )
|
||||
#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH )
|
||||
|
||||
#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive )
|
||||
#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit )
|
||||
#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable )
|
||||
#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify )
|
||||
#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl )
|
||||
#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl )
|
||||
#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus )
|
||||
#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus )
|
||||
#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad )
|
||||
#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL )
|
||||
#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH )
|
||||
|
||||
#define _H3800_ASIC2_TIMER_Base 0x0E00
|
||||
#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */
|
||||
|
||||
#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command )
|
||||
|
||||
#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */
|
||||
#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */
|
||||
#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */
|
||||
#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */
|
||||
#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */
|
||||
#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */
|
||||
#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */
|
||||
#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */
|
||||
|
||||
#define _H3800_ASIC2_CLOCK_Base 0x1000
|
||||
#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */
|
||||
|
||||
#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
|
||||
|
||||
#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
|
||||
#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
|
||||
#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */
|
||||
#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
|
||||
#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */
|
||||
#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */
|
||||
#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */
|
||||
#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */
|
||||
#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */
|
||||
#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */
|
||||
#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */
|
||||
#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */
|
||||
#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */
|
||||
#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */
|
||||
#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */
|
||||
#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */
|
||||
#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */
|
||||
#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */
|
||||
#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */
|
||||
|
||||
#define _H3800_ASIC2_ADC_Base 0x1200
|
||||
#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */
|
||||
#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */
|
||||
#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */
|
||||
|
||||
#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer )
|
||||
#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus )
|
||||
#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data )
|
||||
|
||||
#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */
|
||||
#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */
|
||||
|
||||
#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */
|
||||
#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 )
|
||||
#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 )
|
||||
#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */
|
||||
#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */
|
||||
|
||||
|
||||
#define _H3800_ASIC2_INTR_Base 0x1600
|
||||
#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */
|
||||
#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */
|
||||
#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */
|
||||
|
||||
#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
|
||||
#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
|
||||
#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
|
||||
|
||||
#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */
|
||||
#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */
|
||||
#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */
|
||||
#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 )
|
||||
#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 )
|
||||
#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 )
|
||||
#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 )
|
||||
|
||||
#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */
|
||||
#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */
|
||||
|
||||
|
||||
#define _H3800_ASIC2_OWM_Base 0x1800
|
||||
#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */
|
||||
#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */
|
||||
#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */
|
||||
#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */
|
||||
#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */
|
||||
|
||||
#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command )
|
||||
#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data )
|
||||
#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
|
||||
#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
|
||||
#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
|
||||
|
||||
#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */
|
||||
#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */
|
||||
#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */
|
||||
#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */
|
||||
|
||||
#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */
|
||||
#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */
|
||||
#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */
|
||||
#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */
|
||||
#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */
|
||||
|
||||
#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */
|
||||
#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */
|
||||
#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */
|
||||
#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */
|
||||
#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */
|
||||
|
||||
#define _H3800_ASIC2_FlashCtl_Base 0x1A00
|
||||
|
||||
/****************************************************/
|
||||
/* H3800, ASIC #1
|
||||
* This ASIC is accesed through ASIC #2, and
|
||||
* mapped into the 1c00 - 1f00 region
|
||||
*/
|
||||
|
||||
#define H3800_ASIC1_OFFSET(s,x,y) \
|
||||
(*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
|
||||
|
||||
#define _H3800_ASIC1_MMC_Base 0x1c00
|
||||
|
||||
#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */
|
||||
#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */
|
||||
#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */
|
||||
#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */
|
||||
#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */
|
||||
#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */
|
||||
#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */
|
||||
#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */
|
||||
#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */
|
||||
#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */
|
||||
#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */
|
||||
#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */
|
||||
#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */
|
||||
#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */
|
||||
#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */
|
||||
|
||||
#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock )
|
||||
#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status )
|
||||
#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate )
|
||||
#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister )
|
||||
#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont )
|
||||
#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout )
|
||||
#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
|
||||
#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
|
||||
#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
|
||||
#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask )
|
||||
#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber )
|
||||
#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
|
||||
#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
|
||||
#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
|
||||
#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull )
|
||||
|
||||
#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */
|
||||
#define H3800_ASIC1_MMC_START_CLOCK (1 << 1)
|
||||
|
||||
#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0)
|
||||
#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1)
|
||||
#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2)
|
||||
#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3)
|
||||
#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */
|
||||
#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5)
|
||||
#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6)
|
||||
#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7)
|
||||
#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */
|
||||
#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */
|
||||
#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */
|
||||
#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */
|
||||
|
||||
#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */
|
||||
#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */
|
||||
#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */
|
||||
#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */
|
||||
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */
|
||||
#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */
|
||||
|
||||
#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0)
|
||||
#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1)
|
||||
#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2)
|
||||
#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3)
|
||||
|
||||
#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0)
|
||||
|
||||
/********* GPIO **********/
|
||||
|
||||
#define _H3800_ASIC1_GPIO_Base 0x1e00
|
||||
|
||||
#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */
|
||||
#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */
|
||||
#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */
|
||||
#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */
|
||||
#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */
|
||||
#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */
|
||||
#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */
|
||||
#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */
|
||||
#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */
|
||||
#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */
|
||||
#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */
|
||||
#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */
|
||||
#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */
|
||||
#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */
|
||||
#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */
|
||||
#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */
|
||||
|
||||
#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask )
|
||||
#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction )
|
||||
#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out )
|
||||
#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
|
||||
#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
|
||||
#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
|
||||
#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
|
||||
#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
|
||||
#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State )
|
||||
#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset )
|
||||
#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
|
||||
#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
|
||||
#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
|
||||
#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status )
|
||||
#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
|
||||
#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
|
||||
|
||||
#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0)
|
||||
#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1)
|
||||
#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2)
|
||||
#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3)
|
||||
#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4)
|
||||
#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5)
|
||||
|
||||
#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0)
|
||||
#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1)
|
||||
#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2)
|
||||
|
||||
/* These are all outputs */
|
||||
#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */
|
||||
#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */
|
||||
#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */
|
||||
#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */
|
||||
#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */
|
||||
#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */
|
||||
#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */
|
||||
#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */
|
||||
#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */
|
||||
#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */
|
||||
#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */
|
||||
#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */
|
||||
#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */
|
||||
#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */
|
||||
#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */
|
||||
|
||||
/* Write enable for the flash */
|
||||
|
||||
#define _H3800_ASIC1_FlashWP_Base 0x1F00
|
||||
#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */
|
||||
#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
|
||||
|
||||
#endif /* _INCLUDE_H3600_GPIO_H_ */
|
||||
|
||||
@ -153,8 +153,6 @@
|
||||
*/
|
||||
#ifdef CONFIG_SA1111
|
||||
#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
|
||||
#elif defined(CONFIG_SA1100_H3800)
|
||||
#define NR_IRQS (IRQ_BOARD_END)
|
||||
#elif defined(CONFIG_SHARP_LOCOMO)
|
||||
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
|
||||
#else
|
||||
@ -175,23 +173,3 @@
|
||||
#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
|
||||
#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
|
||||
|
||||
/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
|
||||
#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
|
||||
#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
|
||||
#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
|
||||
#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
|
||||
#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
|
||||
#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
|
||||
#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
|
||||
#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
|
||||
#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
|
||||
#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
|
||||
#define H3800_KPIO_IRQ_COUNT 9
|
||||
|
||||
#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
|
||||
#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
|
||||
#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
|
||||
#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
|
||||
#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
|
||||
#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
|
||||
#define H3800_GPIO_IRQ_COUNT 5
|
||||
|
||||
@ -251,22 +251,6 @@ static struct sa1100fb_mach_info pal_info __initdata = {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SA1100_H3800
|
||||
static struct sa1100fb_mach_info h3800_info __initdata = {
|
||||
.pixclock = 174757, .bpp = 16,
|
||||
.xres = 320, .yres = 240,
|
||||
|
||||
.hsync_len = 3, .vsync_len = 3,
|
||||
.left_margin = 12, .upper_margin = 10,
|
||||
.right_margin = 17, .lower_margin = 1,
|
||||
|
||||
.cmap_static = 1,
|
||||
|
||||
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
||||
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SA1100_H3600
|
||||
static struct sa1100fb_mach_info h3600_info __initdata = {
|
||||
.pixclock = 174757, .bpp = 16,
|
||||
@ -432,11 +416,6 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
|
||||
fbi->rgb[RGB_16] = &h3600_rgb_16;
|
||||
}
|
||||
#endif
|
||||
#ifdef CONFIG_SA1100_H3800
|
||||
if (machine_is_h3800()) {
|
||||
inf = &h3800_info;
|
||||
}
|
||||
#endif
|
||||
#ifdef CONFIG_SA1100_COLLIE
|
||||
if (machine_is_collie()) {
|
||||
inf = &collie_info;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user