From 7113f796bbbced2470cd6d7379d50d7a7a78bf34 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 11 Dec 2019 09:59:55 -0800 Subject: [PATCH 1/2] bnx2x: Do not handle requests from VFs after parity Parity error from the hardware will cause PF to lose the state of their VFs due to PF's internal reload and hardware reset following the parity error. Restrict any configuration request from the VFs after the parity as it could cause unexpected hardware behavior, only way for VFs to recover would be to trigger FLR on VFs and reload them. Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 12 ++++++++++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 12 ++++++++++++ 3 files changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 192ff8d5da32..cff64e43bdd8 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9976,10 +9976,18 @@ static void bnx2x_recovery_failed(struct bnx2x *bp) */ static void bnx2x_parity_recover(struct bnx2x *bp) { - bool global = false; u32 error_recovered, error_unrecovered; - bool is_parity; + bool is_parity, global = false; +#ifdef CONFIG_BNX2X_SRIOV + int vf_idx; + for (vf_idx = 0; vf_idx < bp->requested_nr_virtfn; vf_idx++) { + struct bnx2x_virtf *vf = BP_VF(bp, vf_idx); + + if (vf) + vf->state = VF_LOST; + } +#endif DP(NETIF_MSG_HW, "Handling parity\n"); while (1) { switch (bp->recovery_state) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index b6ebd92ec565..3a716c015415 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -139,6 +139,7 @@ struct bnx2x_virtf { #define VF_ACQUIRED 1 /* VF acquired, but not initialized */ #define VF_ENABLED 2 /* VF Enabled */ #define VF_RESET 3 /* VF FLR'd, pending cleanup */ +#define VF_LOST 4 /* Recovery while VFs are loaded */ bool flr_clnup_stage; /* true during flr cleanup */ bool malicious; /* true if FW indicated so, until FLR */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 0752b7fa4d9c..ea0e9394f898 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -2107,6 +2107,18 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, { int i; + if (vf->state == VF_LOST) { + /* Just ack the FW and return if VFs are lost + * in case of parity error. VFs are supposed to be timedout + * on waiting for PF response. + */ + DP(BNX2X_MSG_IOV, + "VF 0x%x lost, not handling the request\n", vf->abs_vfid); + + storm_memset_vf_mbx_ack(bp, vf->abs_vfid); + return; + } + /* check if tlv type is known */ if (bnx2x_tlv_supported(mbx->first_tlv.tl.type)) { /* Lock the per vf op mutex and note the locker's identity. From ee699f89bdbaa19c399804504241b5c531b48888 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 11 Dec 2019 09:59:56 -0800 Subject: [PATCH 2/2] bnx2x: Fix logic to get total no. of PFs per engine Driver doesn't calculate total number of PFs configured on a given engine correctly which messed up resources in the PFs loaded on that engine, leading driver to exceed configuration of resources (like vlan filters etc.) beyond the limit per engine, which ended up with asserts from the firmware. Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 8b08cb18e363..3f63ffd7561b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -1109,7 +1109,7 @@ static inline u8 bnx2x_get_path_func_num(struct bnx2x *bp) for (i = 0; i < E1H_FUNC_MAX / 2; i++) { u32 func_config = MF_CFG_RD(bp, - func_mf_config[BP_PORT(bp) + 2 * i]. + func_mf_config[BP_PATH(bp) + 2 * i]. config); func_num += ((func_config & FUNC_MF_CFG_FUNC_HIDE) ? 0 : 1);