Merge branch 'baikal/drivers' into arm/drivers

These are mainly fixups for comments that collided with me
already merging v3 of the series, and one patch that I had forgotten
to pick up.

* baikal/drivers:
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/baikal,bt1-l2-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 L2-cache Control Block
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  By means of the System Controller Baikal-T1 SoC exposes a few settings to
+  tune the MIPS P5600 CM2 L2 cache performance up. In particular it's possible
+  to change the Tag, Data and Way-select RAM access latencies. Baikal-T1
+  L2-cache controller block is responsible for the tuning. Its DT node is
+  supposed to be a child of the system controller.
+
+properties:
+  compatible:
+    const: baikal,bt1-l2-ctl
+
+  reg:
+    maxItems: 1
+
+  baikal,l2-ws-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Way-select RAM accesses
+    default: 0
+    minimum: 0
+    maximum: 3
+
+  baikal,l2-tag-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Tag RAM accesses
+    default: 0
+    minimum: 0
+    maximum: 3
+
+  baikal,l2-data-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Data RAM accesses
+    default: 1
+    minimum: 0
+    maximum: 3
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    l2@1f04d028 {
+      compatible = "baikal,bt1-l2-ctl";
+      reg = <0x1f04d028 0x004>;
+
+      baikal,l2-ws-latency = <1>;
+      baikal,l2-tag-latency = <1>;
+      baikal,l2-data-latency = <2>;
+    };
+...

drivers/bus/Kconfig

@@ -30,7 +30,7 @@ config BRCMSTB_GISB_ARB
 	  and internal bus master decoding.
 
 config BT1_APB
-	tristate "Baikal-T1 APB-bus driver"
+	bool "Baikal-T1 APB-bus driver"
 	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
 	select REGMAP_MMIO
 	help
@@ -45,7 +45,7 @@ config BT1_APB
 	  accessed via corresponding sysfs nodes.
 
 config BT1_AXI
-	tristate "Baikal-T1 AXI-bus driver"
+	bool "Baikal-T1 AXI-bus driver"
 	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
 	select MFD_SYSCON
 	help

drivers/bus/bt1-apb.c

@@ -15,6 +15,7 @@
 #include <linux/atomic.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/nmi.h>
 #include <linux/of.h>
 #include <linux/regmap.h>
@@ -163,12 +164,10 @@ static int bt1_apb_request_regs(struct bt1_apb *apb)
 	}
 
 	apb->res = devm_platform_ioremap_resource_byname(pdev, "nodev");
-	if (IS_ERR(apb->res)) {
+	if (IS_ERR(apb->res))
 		dev_err(apb->dev, "Couldn't map reserved region\n");
-		return PTR_ERR(apb->res);
-	}
 
-	return 0;
+	return PTR_ERR_OR_ZERO(apb->res);
 }
 
 static int bt1_apb_request_rst(struct bt1_apb *apb)
@@ -310,15 +309,15 @@ static ssize_t timeout_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(timeout);
 
-static ssize_t inject_error_show(struct device *dev, struct device_attribute *attr,
-			     char *buf)
+static ssize_t inject_error_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE, "Error injection: nodev irq\n");
 }
 
 static ssize_t inject_error_store(struct device *dev,
-			      struct device_attribute *attr,
-			      const char *data, size_t count)
+				  struct device_attribute *attr,
+				  const char *data, size_t count)
 {
 	struct bt1_apb *apb = dev_get_drvdata(dev);
 
@@ -326,9 +325,9 @@ static ssize_t inject_error_store(struct device *dev,
 	 * Either dummy read from the unmapped address in the APB IO area
 	 * or manually set the IRQ status.
 	 */
-	if (!strncmp(data, "nodev", 5))
+	if (sysfs_streq(data, "nodev"))
 		readl(apb->res);
-	else if (!strncmp(data, "irq", 3))
+	else if (sysfs_streq(data, "irq"))
 		regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING,
 				   APB_EHB_ISR_PENDING);
 	else

drivers/bus/bt1-axi.c

@@ -124,12 +124,10 @@ static int bt1_axi_request_regs(struct bt1_axi *axi)
 	}
 
 	axi->qos_regs = devm_platform_ioremap_resource_byname(pdev, "qos");
-	if (IS_ERR(axi->qos_regs)) {
+	if (IS_ERR(axi->qos_regs))
 		dev_err(dev, "Couldn't map AXI-bus QoS registers\n");
-		return PTR_ERR(axi->qos_regs);
-	}
 
-	return 0;
+	return PTR_ERR_OR_ZERO(axi->qos_regs);
 }
 
 static int bt1_axi_request_rst(struct bt1_axi *axi)
@@ -173,12 +171,10 @@ static int bt1_axi_request_clk(struct bt1_axi *axi)
 	}
 
 	ret = devm_add_action_or_reset(axi->dev, bt1_axi_disable_clk, axi);
-	if (ret) {
+	if (ret)
 		dev_err(axi->dev, "Can't add AXI clock disable action\n");
-		return ret;
-	}
 
-	return 0;
+	return ret;
 }
 
 static int bt1_axi_request_irq(struct bt1_axi *axi)
@@ -192,12 +188,10 @@ static int bt1_axi_request_irq(struct bt1_axi *axi)
 
 	ret = devm_request_irq(axi->dev, axi->irq, bt1_axi_isr, IRQF_SHARED,
 			       "bt1-axi", axi);
-	if (ret) {
+	if (ret)
 		dev_err(axi->dev, "Couldn't request AXI EHB IRQ\n");
-		return ret;
-	}
 
-	return 0;
+	return ret;
 }
 
 static ssize_t count_show(struct device *dev,
@@ -226,9 +220,9 @@ static ssize_t inject_error_store(struct device *dev,
 	 * error while unaligned writing - the AXI bus write error handled
 	 * by this driver.
 	 */
-	if (!strncmp(data, "bus", 3))
+	if (sysfs_streq(data, "bus"))
 		readb(axi->qos_regs);
-	else if (!strncmp(data, "unaligned", 9))
+	else if (sysfs_streq(data, "unaligned"))
 		writeb(0, axi->qos_regs);
 	else
 		return -EINVAL;