diff --git a/drivers/gpu/drm/mcde/mcde_display.c b/drivers/gpu/drm/mcde/mcde_display.c
index 751454ae3cd1..65522481b367 100644
--- a/drivers/gpu/drm/mcde/mcde_display.c
+++ b/drivers/gpu/drm/mcde/mcde_display.c
@@ -934,10 +934,10 @@ static void mcde_display_enable(struct drm_simple_display_pipe *pipe,
 		val = readl(mcde->regs + MCDE_CRC);
 		val |= MCDE_CRC_SYCEN0;
 		writel(val, mcde->regs + MCDE_CRC);
-
-		drm_crtc_vblank_on(crtc);
 	}
 
+	drm_crtc_vblank_on(crtc);
+
 	dev_info(drm->dev, "MCDE display is enabled\n");
 }
 
@@ -947,8 +947,7 @@ static void mcde_display_disable(struct drm_simple_display_pipe *pipe)
 	struct drm_device *drm = crtc->dev;
 	struct mcde *mcde = drm->dev_private;
 
-	if (mcde->te_sync)
-		drm_crtc_vblank_off(crtc);
+	drm_crtc_vblank_off(crtc);
 
 	/* Disable FIFO A flow */
 	mcde_disable_fifo(mcde, MCDE_FIFO_A, true);
@@ -1097,6 +1096,8 @@ static struct drm_simple_display_pipe_funcs mcde_display_funcs = {
 	.enable = mcde_display_enable,
 	.disable = mcde_display_disable,
 	.update = mcde_display_update,
+	.enable_vblank = mcde_display_enable_vblank,
+	.disable_vblank = mcde_display_disable_vblank,
 	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 
@@ -1123,12 +1124,6 @@ int mcde_display_init(struct drm_device *drm)
 		DRM_FORMAT_YUV422,
 	};
 
-	/* Provide vblank only when we have TE enabled */
-	if (mcde->te_sync) {
-		mcde_display_funcs.enable_vblank = mcde_display_enable_vblank;
-		mcde_display_funcs.disable_vblank = mcde_display_disable_vblank;
-	}
-
 	ret = drm_simple_display_pipe_init(drm, &mcde->pipe,
 					   &mcde_display_funcs,
 					   formats, ARRAY_SIZE(formats),
diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
index 5649887d2b90..0ccd3b0308c2 100644
--- a/drivers/gpu/drm/mcde/mcde_drv.c
+++ b/drivers/gpu/drm/mcde/mcde_drv.c
@@ -179,18 +179,10 @@ static int mcde_modeset_init(struct drm_device *drm)
 	mode_config->min_height = 1;
 	mode_config->max_height = 1080;
 
-	/*
-	 * Currently we only support vblank handling on the DSI bridge, using
-	 * TE synchronization. If TE sync is not set up, it is still possible
-	 * to push out a single update on demand, but this is hard for DRM to
-	 * exploit.
-	 */
-	if (mcde->te_sync) {
-		ret = drm_vblank_init(drm, 1);
-		if (ret) {
-			dev_err(drm->dev, "failed to init vblank\n");
-			goto out_config;
-		}
+	ret = drm_vblank_init(drm, 1);
+	if (ret) {
+		dev_err(drm->dev, "failed to init vblank\n");
+		goto out_config;
 	}
 
 	ret = mcde_display_init(drm);