diff --git a/Documentation/i2c/busses/i2c-diolan-u2c b/Documentation/i2c/busses/i2c-diolan-u2c
new file mode 100644
index 000000000000..30fe4bb9a069
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-diolan-u2c
@@ -0,0 +1,26 @@
+Kernel driver i2c-diolan-u2c
+
+Supported adapters:
+  * Diolan U2C-12 I2C-USB adapter
+    Documentation:
+	http://www.diolan.com/i2c/u2c12.html
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+Description
+-----------
+
+This is the driver for the Diolan U2C-12 USB-I2C adapter.
+
+The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect
+a computer to I2C slave devices using a USB interface. It also supports
+connectivity to SPI devices.
+
+This driver only supports the I2C interface of U2C-12. The driver does not use
+interrupts.
+
+
+Module parameters
+-----------------
+
+* frequency: I2C bus frequency
diff --git a/MAINTAINERS b/MAINTAINERS
index 38077a656820..53e315e777ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2138,6 +2138,12 @@ F:	Documentation/serial/digiepca.txt
 F:	drivers/char/epca*
 F:	drivers/char/digi*
 
+DIOLAN U2C-12 I2C DRIVER
+M:	Guenter Roeck <guenter.roeck@ericsson.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-diolan-u2c.c
+
 DIRECTORY NOTIFICATION (DNOTIFY)
 M:	Eric Paris <eparis@parisplace.org>
 S:	Maintained
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index 4aec493640b4..2cbf6df09b82 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -11,8 +11,8 @@ extern void __init mmp2_init_irq(void);
 extern void mmp2_clear_pmic_int(void);
 
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/i2c.h>
 
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 1801e4206232..a52b3d2f325c 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -8,8 +8,8 @@ extern void __init pxa168_init_irq(void);
 extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <video/pxa168fb.h>
 #include <plat/pxa27x_keypad.h>
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index f13c49d6f8dc..91be75591398 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -7,8 +7,8 @@ extern struct sys_timer pxa910_timer;
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index e194d928cdaa..d2af73321dae 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/types.h>
 #include <linux/i2c/pcf857x.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/max1586.h>
@@ -51,8 +52,6 @@
 #include <mach/irda.h>
 #include <mach/ohci.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 7984268508b6..bfca7ed2fea3 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -29,6 +29,7 @@
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <linux/mfd/da903x.h>
 #include <linux/regulator/machine.h>
@@ -48,7 +49,6 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <mach/audio.h>
 #include <mach/pxa3xx-u2d.h>
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 28f667e52ef9..81c3c433e2d6 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -20,6 +20,7 @@
 #include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
@@ -27,8 +28,6 @@
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 07b62a096f17..ee797397dc5b 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/sysdev.h>
 
 #include <asm/irq.h>
@@ -33,8 +34,6 @@
 #include <mach/pxa27x-udc.h>
 #include <mach/pxafb.h>
 
-#include <plat/i2c.h>
-
 #include "devices.h"
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a5452a3a276d..d4e705caefea 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/backlight.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -45,7 +46,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index a305424a967d..0481c29a70e8 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -17,12 +17,12 @@
 #include <linux/mtd/partitions.h>
 #include <linux/sm501.h>
 #include <linux/smsc911x.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/csb726.h>
 #include <mach/mfp-pxa27x.h>
-#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 4c766e3b4af3..c4bf08b3eb61 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,6 +4,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/pxa2xx_spi.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/pmu.h>
 #include <mach/udc.h>
@@ -16,7 +17,6 @@
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <mach/hardware.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index a78bb3097739..b411d7cbf5a1 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -31,6 +31,7 @@
 #include <linux/apm-emulation.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/regulator/userspace-consumer.h>
 
 #include <media/soc_camera.h>
@@ -45,7 +46,6 @@
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <plat/pxa27x_keypad.h>
-#include <plat/i2c.h>
 #include <mach/camera.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 87cec0abe5b0..93f05e024313 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds-lp3944.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <media/soc_camera.h>
 
@@ -30,7 +31,6 @@
 #include <mach/pxa27x.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
-#include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <plat/pxa27x_keypad.h>
 #include <mach/camera.h>
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index a908e0a5f396..6de0ad0eea65 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -35,6 +35,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -42,7 +43,6 @@
 
 #include <mach/pxa27x.h>
 #include <mach/hx4700.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 
 #include <video/platform_lcd.h>
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index ccb7bfad17ca..87c1ed9ccd2f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -28,6 +28,7 @@
 #include <linux/leds.h>
 #include <linux/mfd/da903x.h>
 #include <linux/i2c/max732x.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -45,7 +46,6 @@
 #include <mach/mmc.h>
 #include <plat/pxa27x_keypad.h>
 #include <mach/littleton.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 41198f0dc3ac..5535991c4a3c 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -28,6 +28,7 @@
 #include <linux/regulator/bq24022.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -36,7 +37,6 @@
 #include <mach/pxa27x.h>
 #include <mach/magician.h>
 #include <mach/pxafb.h>
-#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d4b6f2375f2c..f9542220595a 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -27,6 +27,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -46,7 +47,6 @@
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index faafea3542fb..78d98a8607ec 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -39,6 +39,7 @@
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
 #include <linux/slab.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -50,7 +51,6 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <media/soc_camera.h>
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index cdf7f41e2bb3..b5a8fd3fce04 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -22,8 +22,8 @@
 #include <linux/serial_8250.h>
 #include <linux/dm9000.h>
 #include <linux/gpio.h>
+#include <linux/i2c/pxa-i2c.h>
 
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 35572c427fa8..72adb3ae2b43 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -22,6 +22,7 @@
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -36,8 +37,6 @@
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 90820faa711a..9dbf3ccd4150 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -23,12 +23,12 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 4f0ff1ab623d..35353af345d5 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -23,6 +23,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -44,7 +45,6 @@
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
-#include <plat/i2c.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 28b11be00b3f..1cb5d0f9723f 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -32,8 +33,6 @@
 #include <mach/dma.h>
 #include <mach/smemc.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 #include "clock.h"
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 1230343d9c70..f374247b8466 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -21,6 +21,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -32,7 +33,6 @@
 #include <mach/dma.h>
 #include <mach/regs-intc.h>
 #include <mach/smemc.h>
-#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 437980f72710..23b229bd06e9 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
@@ -27,7 +28,6 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/regs-intc.h>
-#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 8361151be054..47094188e029 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -32,6 +32,7 @@
 #include <linux/sched.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/lis3lv02d.h>
@@ -53,7 +54,6 @@
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index c1ca8cb467fc..eb83c89428ef 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/smc91x.h>
 #include <linux/mfd/da903x.h>
 #include <linux/mtd/mtd.h>
@@ -31,7 +32,6 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa930.h>
-#include <plat/i2c.h>
 #include <mach/pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index e497922f761a..9322fe527c7f 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
 
 #include <asm/mach-types.h>
@@ -24,8 +25,6 @@
 #include <mach/mfp-pxa930.h>
 #include <mach/gpio.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 
 #define SAARB_NR_IRQS	(IRQ_BOARD_START + 40)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b49a2c21124c..38e2c0912b9a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -47,8 +48,6 @@
 #include <mach/sharpsl_pm.h>
 #include <mach/smemc.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 9a14fdb83c82..cb5611daf5fe 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/partitions.h>
 
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
 #include <linux/smc91x.h>
@@ -43,7 +44,6 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index 70191a9450eb..79f4422f12f4 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/gpio.h>
 #include <linux/mfd/88pm860x.h>
 
@@ -23,8 +24,6 @@
 
 #include <mach/pxa930.h>
 
-#include <plat/i2c.h>
-
 #include "devices.h"
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index f2582ec300d9..5ad3807af334 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,6 +34,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -41,7 +42,6 @@
 #include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
-#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 423261d63d07..857bb2e63486 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -26,6 +26,7 @@
 #include <linux/dm9000.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -47,7 +48,6 @@
 #include <mach/irda.h>
 #include <mach/ohci.h>
 #include <mach/smemc.h>
-#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 49eeeab23689..12279214c875 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -36,6 +36,7 @@
 #include <linux/gpio.h>
 #include <linux/jiffies.h>
 #include <linux/i2c-gpio.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
 #include <linux/pwm_backlight.h>
@@ -47,7 +48,6 @@
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <plat/i2c.h>
 #include <mach/regs-uart.h>
 #include <mach/arcom-pcmcia.h>
 #include <mach/viper.h>
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index b9b579715ff6..e709fd459268 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -26,6 +26,7 @@
 #include <linux/ucb1400.h>
 #include <linux/ata_platform.h>
 #include <linux/regulator/max1586.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,8 +41,6 @@
 #include <mach/udc.h>
 #include <mach/pata_pxa.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 51c0281c6e0a..f55f8f2e0db3 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -16,6 +16,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/smc91x.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -26,8 +27,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <plat/i2c.h>
-
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa25x.h>
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index a323e076129e..aaf883754ef4 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -29,6 +29,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
 #include <linux/regulator/machine.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,8 +41,6 @@
 #include <mach/mmc.h>
 #include <plat/pxa27x_keypad.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index b92aa3b8c4f7..730f51e57c17 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/apm-emulation.h>
 #include <linux/can/platform/mcp251x.h>
@@ -33,8 +34,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/i2c.h>
-
 #include <mach/pxa2xx-regs.h>
 #include <mach/regs-uart.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 3aa73b3e33f2..93c64d8d7de9 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -17,11 +17,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
 
 #include <mach/pxa300.h>
-#include <plat/i2c.h>
 #include <mach/zylonite.h>
 
 #include "generic.h"
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ad415e6ec5a1..326652f673f7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -547,15 +547,18 @@ config I2C_PUV3
 
 config I2C_PXA
 	tristate "Intel PXA2XX I2C adapter"
-	depends on ARCH_PXA || ARCH_MMP
+	depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF)
 	help
 	  If you have devices in the PXA I2C bus, say yes to this option.
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pxa.
 
+config I2C_PXA_PCI
+	def_bool I2C_PXA && X86_32 && PCI && OF
+
 config I2C_PXA_SLAVE
 	bool "Intel PXA2XX I2C Slave comms support"
-	depends on I2C_PXA
+	depends on I2C_PXA && !X86_32
 	help
 	  Support I2C slave mode communications on the PXA I2C bus.  This
 	  is necessary for systems where the PXA may be a target on the
@@ -668,15 +671,28 @@ config I2C_XILINX
 	  will be called xilinx_i2c.
 
 config I2C_EG20T
-        tristate "PCH I2C of Intel EG20T"
-        depends on PCI
-        help
-          This driver is for PCH(Platform controller Hub) I2C of EG20T which
-          is an IOH(Input/Output Hub) for x86 embedded processor.
-          This driver can access PCH I2C bus device.
+	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH"
+	depends on PCI
+	help
+	  This driver is for PCH(Platform controller Hub) I2C of EG20T which
+	  is an IOH(Input/Output Hub) for x86 embedded processor.
+	  This driver can access PCH I2C bus device.
+
+	  This driver also supports the ML7213, a companion chip for the
+	  Atom E6xx series and compatible with the Intel EG20T PCH.
 
 comment "External I2C/SMBus adapter drivers"
 
+config I2C_DIOLAN_U2C
+	tristate "Diolan U2C-12 USB adapter"
+	depends on USB
+	help
+	  If you say yes to this option, support will be included for Diolan
+	  U2C-12, a USB to I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-diolan-u2c.
+
 config I2C_PARPORT
 	tristate "Parallel port adapter"
 	depends on PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 3878c959d4fa..e6cf294d3729 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
+obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
 obj-$(CONFIG_I2C_S6000)		+= i2c-s6000.o
 obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
@@ -67,6 +68,7 @@ obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_EG20T)         += i2c-eg20t.o
 
 # External I2C/SMBus adapter drivers
+obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_TAOS_EVM)	+= i2c-taos-evm.o
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
new file mode 100644
index 000000000000..76366716a854
--- /dev/null
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -0,0 +1,535 @@
+/*
+ * Driver for the Diolan u2c-12 USB-I2C adapter
+ *
+ * Copyright (c) 2010-2011 Ericsson AB
+ *
+ * Derived from:
+ *  i2c-tiny-usb.c
+ *  Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#define DRIVER_NAME		"i2c-diolan-u2c"
+
+#define USB_VENDOR_ID_DIOLAN		0x0abf
+#define USB_DEVICE_ID_DIOLAN_U2C	0x3370
+
+#define DIOLAN_OUT_EP		0x02
+#define DIOLAN_IN_EP		0x84
+
+/* commands via USB, must match command ids in the firmware */
+#define CMD_I2C_READ		0x01
+#define CMD_I2C_WRITE		0x02
+#define CMD_I2C_SCAN		0x03	/* Returns list of detected devices */
+#define CMD_I2C_RELEASE_SDA	0x04
+#define CMD_I2C_RELEASE_SCL	0x05
+#define CMD_I2C_DROP_SDA	0x06
+#define CMD_I2C_DROP_SCL	0x07
+#define CMD_I2C_READ_SDA	0x08
+#define CMD_I2C_READ_SCL	0x09
+#define CMD_GET_FW_VERSION	0x0a
+#define CMD_GET_SERIAL		0x0b
+#define CMD_I2C_START		0x0c
+#define CMD_I2C_STOP		0x0d
+#define CMD_I2C_REPEATED_START	0x0e
+#define CMD_I2C_PUT_BYTE	0x0f
+#define CMD_I2C_GET_BYTE	0x10
+#define CMD_I2C_PUT_ACK		0x11
+#define CMD_I2C_GET_ACK		0x12
+#define CMD_I2C_PUT_BYTE_ACK	0x13
+#define CMD_I2C_GET_BYTE_ACK	0x14
+#define CMD_I2C_SET_SPEED	0x1b
+#define CMD_I2C_GET_SPEED	0x1c
+#define CMD_I2C_SET_CLK_SYNC	0x24
+#define CMD_I2C_GET_CLK_SYNC	0x25
+#define CMD_I2C_SET_CLK_SYNC_TO	0x26
+#define CMD_I2C_GET_CLK_SYNC_TO	0x27
+
+#define RESP_OK			0x00
+#define RESP_FAILED		0x01
+#define RESP_BAD_MEMADDR	0x04
+#define RESP_DATA_ERR		0x05
+#define RESP_NOT_IMPLEMENTED	0x06
+#define RESP_NACK		0x07
+#define RESP_TIMEOUT		0x09
+
+#define U2C_I2C_SPEED_FAST	0	/* 400 kHz */
+#define U2C_I2C_SPEED_STD	1	/* 100 kHz */
+#define U2C_I2C_SPEED_2KHZ	242	/* 2 kHz, minimum speed */
+#define U2C_I2C_SPEED(f)	((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1)
+
+#define U2C_I2C_FREQ_FAST	400000
+#define U2C_I2C_FREQ_STD	100000
+#define U2C_I2C_FREQ(s)		(1000000 / (2 * (s - 1) + 10))
+
+#define DIOLAN_USB_TIMEOUT	100	/* in ms */
+#define DIOLAN_SYNC_TIMEOUT	20	/* in ms */
+
+#define DIOLAN_OUTBUF_LEN	128
+#define DIOLAN_FLUSH_LEN	(DIOLAN_OUTBUF_LEN - 4)
+#define DIOLAN_INBUF_LEN	256	/* Maximum supported receive length */
+
+/* Structure to hold all of our device specific stuff */
+struct i2c_diolan_u2c {
+	u8 obuffer[DIOLAN_OUTBUF_LEN];	/* output buffer */
+	u8 ibuffer[DIOLAN_INBUF_LEN];	/* input buffer */
+	struct usb_device *usb_dev;	/* the usb device for this device */
+	struct usb_interface *interface;/* the interface for this device */
+	struct i2c_adapter adapter;	/* i2c related things */
+	int olen;			/* Output buffer length */
+	int ocount;			/* Number of enqueued messages */
+};
+
+static uint frequency = U2C_I2C_FREQ_STD;	/* I2C clock frequency in Hz */
+
+module_param(frequency, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz");
+
+/* usb layer */
+
+/* Send command to device, and get response. */
+static int diolan_usb_transfer(struct i2c_diolan_u2c *dev)
+{
+	int ret = 0;
+	int actual;
+	int i;
+
+	if (!dev->olen || !dev->ocount)
+		return -EINVAL;
+
+	ret = usb_bulk_msg(dev->usb_dev,
+			   usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP),
+			   dev->obuffer, dev->olen, &actual,
+			   DIOLAN_USB_TIMEOUT);
+	if (!ret) {
+		for (i = 0; i < dev->ocount; i++) {
+			int tmpret;
+
+			tmpret = usb_bulk_msg(dev->usb_dev,
+					      usb_rcvbulkpipe(dev->usb_dev,
+							      DIOLAN_IN_EP),
+					      dev->ibuffer,
+					      sizeof(dev->ibuffer), &actual,
+					      DIOLAN_USB_TIMEOUT);
+			/*
+			 * Stop command processing if a previous command
+			 * returned an error.
+			 * Note that we still need to retrieve all messages.
+			 */
+			if (ret < 0)
+				continue;
+			ret = tmpret;
+			if (ret == 0 && actual > 0) {
+				switch (dev->ibuffer[actual - 1]) {
+				case RESP_NACK:
+					/*
+					 * Return ENXIO if NACK was received as
+					 * response to the address phase,
+					 * EIO otherwise
+					 */
+					ret = i == 1 ? -ENXIO : -EIO;
+					break;
+				case RESP_TIMEOUT:
+					ret = -ETIMEDOUT;
+					break;
+				case RESP_OK:
+					/* strip off return code */
+					ret = actual - 1;
+					break;
+				default:
+					ret = -EIO;
+					break;
+				}
+			}
+		}
+	}
+	dev->olen = 0;
+	dev->ocount = 0;
+	return ret;
+}
+
+static int diolan_write_cmd(struct i2c_diolan_u2c *dev, bool flush)
+{
+	if (flush || dev->olen >= DIOLAN_FLUSH_LEN)
+		return diolan_usb_transfer(dev);
+	return 0;
+}
+
+/* Send command (no data) */
+static int diolan_usb_cmd(struct i2c_diolan_u2c *dev, u8 command, bool flush)
+{
+	dev->obuffer[dev->olen++] = command;
+	dev->ocount++;
+	return diolan_write_cmd(dev, flush);
+}
+
+/* Send command with one byte of data */
+static int diolan_usb_cmd_data(struct i2c_diolan_u2c *dev, u8 command, u8 data,
+			       bool flush)
+{
+	dev->obuffer[dev->olen++] = command;
+	dev->obuffer[dev->olen++] = data;
+	dev->ocount++;
+	return diolan_write_cmd(dev, flush);
+}
+
+/* Send command with two bytes of data */
+static int diolan_usb_cmd_data2(struct i2c_diolan_u2c *dev, u8 command, u8 d1,
+				u8 d2, bool flush)
+{
+	dev->obuffer[dev->olen++] = command;
+	dev->obuffer[dev->olen++] = d1;
+	dev->obuffer[dev->olen++] = d2;
+	dev->ocount++;
+	return diolan_write_cmd(dev, flush);
+}
+
+/*
+ * Flush input queue.
+ * If we don't do this at startup and the controller has queued up
+ * messages which were not retrieved, it will stop responding
+ * at some point.
+ */
+static void diolan_flush_input(struct i2c_diolan_u2c *dev)
+{
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		int actual = 0;
+		int ret;
+
+		ret = usb_bulk_msg(dev->usb_dev,
+				   usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP),
+				   dev->ibuffer, sizeof(dev->ibuffer), &actual,
+				   DIOLAN_USB_TIMEOUT);
+		if (ret < 0 || actual == 0)
+			break;
+	}
+	if (i == 10)
+		dev_err(&dev->interface->dev, "Failed to flush input buffer\n");
+}
+
+static int diolan_i2c_start(struct i2c_diolan_u2c *dev)
+{
+	return diolan_usb_cmd(dev, CMD_I2C_START, false);
+}
+
+static int diolan_i2c_repeated_start(struct i2c_diolan_u2c *dev)
+{
+	return diolan_usb_cmd(dev, CMD_I2C_REPEATED_START, false);
+}
+
+static int diolan_i2c_stop(struct i2c_diolan_u2c *dev)
+{
+	return diolan_usb_cmd(dev, CMD_I2C_STOP, true);
+}
+
+static int diolan_i2c_get_byte_ack(struct i2c_diolan_u2c *dev, bool ack,
+				   u8 *byte)
+{
+	int ret;
+
+	ret = diolan_usb_cmd_data(dev, CMD_I2C_GET_BYTE_ACK, ack, true);
+	if (ret > 0)
+		*byte = dev->ibuffer[0];
+	else if (ret == 0)
+		ret = -EIO;
+
+	return ret;
+}
+
+static int diolan_i2c_put_byte_ack(struct i2c_diolan_u2c *dev, u8 byte)
+{
+	return diolan_usb_cmd_data(dev, CMD_I2C_PUT_BYTE_ACK, byte, false);
+}
+
+static int diolan_set_speed(struct i2c_diolan_u2c *dev, u8 speed)
+{
+	return diolan_usb_cmd_data(dev, CMD_I2C_SET_SPEED, speed, true);
+}
+
+/* Enable or disable clock synchronization (stretching) */
+static int diolan_set_clock_synch(struct i2c_diolan_u2c *dev, bool enable)
+{
+	return diolan_usb_cmd_data(dev, CMD_I2C_SET_CLK_SYNC, enable, true);
+}
+
+/* Set clock synchronization timeout in ms */
+static int diolan_set_clock_synch_timeout(struct i2c_diolan_u2c *dev, int ms)
+{
+	int to_val = ms * 10;
+
+	return diolan_usb_cmd_data2(dev, CMD_I2C_SET_CLK_SYNC_TO,
+				    to_val & 0xff, (to_val >> 8) & 0xff, true);
+}
+
+static void diolan_fw_version(struct i2c_diolan_u2c *dev)
+{
+	int ret;
+
+	ret = diolan_usb_cmd(dev, CMD_GET_FW_VERSION, true);
+	if (ret >= 2)
+		dev_info(&dev->interface->dev,
+			 "Diolan U2C firmware version %u.%u\n",
+			 (unsigned int)dev->ibuffer[0],
+			 (unsigned int)dev->ibuffer[1]);
+}
+
+static void diolan_get_serial(struct i2c_diolan_u2c *dev)
+{
+	int ret;
+	u32 serial;
+
+	ret = diolan_usb_cmd(dev, CMD_GET_SERIAL, true);
+	if (ret >= 4) {
+		serial = le32_to_cpu(*(u32 *)dev->ibuffer);
+		dev_info(&dev->interface->dev,
+			 "Diolan U2C serial number %u\n", serial);
+	}
+}
+
+static int diolan_init(struct i2c_diolan_u2c *dev)
+{
+	int speed, ret;
+
+	if (frequency >= 200000) {
+		speed = U2C_I2C_SPEED_FAST;
+		frequency = U2C_I2C_FREQ_FAST;
+	} else if (frequency >= 100000 || frequency == 0) {
+		speed = U2C_I2C_SPEED_STD;
+		frequency = U2C_I2C_FREQ_STD;
+	} else {
+		speed = U2C_I2C_SPEED(frequency);
+		if (speed > U2C_I2C_SPEED_2KHZ)
+			speed = U2C_I2C_SPEED_2KHZ;
+		frequency = U2C_I2C_FREQ(speed);
+	}
+
+	dev_info(&dev->interface->dev,
+		 "Diolan U2C at USB bus %03d address %03d speed %d Hz\n",
+		 dev->usb_dev->bus->busnum, dev->usb_dev->devnum, frequency);
+
+	diolan_flush_input(dev);
+	diolan_fw_version(dev);
+	diolan_get_serial(dev);
+
+	/* Set I2C speed */
+	ret = diolan_set_speed(dev, speed);
+	if (ret < 0)
+		return ret;
+
+	/* Configure I2C clock synchronization */
+	ret = diolan_set_clock_synch(dev, speed != U2C_I2C_SPEED_FAST);
+	if (ret < 0)
+		return ret;
+
+	if (speed != U2C_I2C_SPEED_FAST)
+		ret = diolan_set_clock_synch_timeout(dev, DIOLAN_SYNC_TIMEOUT);
+
+	return ret;
+}
+
+/* i2c layer */
+
+static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
+			   int num)
+{
+	struct i2c_diolan_u2c *dev = i2c_get_adapdata(adapter);
+	struct i2c_msg *pmsg;
+	int i, j;
+	int ret, sret;
+
+	ret = diolan_i2c_start(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+		if (i) {
+			ret = diolan_i2c_repeated_start(dev);
+			if (ret < 0)
+				goto abort;
+		}
+		if (pmsg->flags & I2C_M_RD) {
+			ret =
+			    diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1);
+			if (ret < 0)
+				goto abort;
+			for (j = 0; j < pmsg->len; j++) {
+				u8 byte;
+				bool ack = j < pmsg->len - 1;
+
+				/*
+				 * Don't send NACK if this is the first byte
+				 * of a SMBUS_BLOCK message.
+				 */
+				if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN))
+					ack = true;
+
+				ret = diolan_i2c_get_byte_ack(dev, ack, &byte);
+				if (ret < 0)
+					goto abort;
+				/*
+				 * Adjust count if first received byte is length
+				 */
+				if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) {
+					if (byte == 0
+					    || byte > I2C_SMBUS_BLOCK_MAX) {
+						ret = -EPROTO;
+						goto abort;
+					}
+					pmsg->len += byte;
+				}
+				pmsg->buf[j] = byte;
+			}
+		} else {
+			ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1);
+			if (ret < 0)
+				goto abort;
+			for (j = 0; j < pmsg->len; j++) {
+				ret = diolan_i2c_put_byte_ack(dev,
+							      pmsg->buf[j]);
+				if (ret < 0)
+					goto abort;
+			}
+		}
+	}
+abort:
+	sret = diolan_i2c_stop(dev);
+	if (sret < 0 && ret >= 0)
+		ret = sret;
+	return ret;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 diolan_usb_func(struct i2c_adapter *a)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm diolan_usb_algorithm = {
+	.master_xfer = diolan_usb_xfer,
+	.functionality = diolan_usb_func,
+};
+
+/* device layer */
+
+static const struct usb_device_id diolan_u2c_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_DIOLAN, USB_DEVICE_ID_DIOLAN_U2C) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, diolan_u2c_table);
+
+static void diolan_u2c_free(struct i2c_diolan_u2c *dev)
+{
+	usb_put_dev(dev->usb_dev);
+	kfree(dev);
+}
+
+static int diolan_u2c_probe(struct usb_interface *interface,
+			    const struct usb_device_id *id)
+{
+	struct i2c_diolan_u2c *dev;
+	int ret;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		dev_err(&interface->dev, "no memory for device state\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+	dev->interface = interface;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* setup i2c adapter description */
+	dev->adapter.owner = THIS_MODULE;
+	dev->adapter.class = I2C_CLASS_HWMON;
+	dev->adapter.algo = &diolan_usb_algorithm;
+	i2c_set_adapdata(&dev->adapter, dev);
+	snprintf(dev->adapter.name, sizeof(dev->adapter.name),
+		 DRIVER_NAME " at bus %03d device %03d",
+		 dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
+
+	dev->adapter.dev.parent = &dev->interface->dev;
+
+	/* initialize diolan i2c interface */
+	ret = diolan_init(dev);
+	if (ret < 0) {
+		dev_err(&interface->dev, "failed to initialize adapter\n");
+		goto error_free;
+	}
+
+	/* and finally attach to i2c layer */
+	ret = i2c_add_adapter(&dev->adapter);
+	if (ret < 0) {
+		dev_err(&interface->dev, "failed to add I2C adapter\n");
+		goto error_free;
+	}
+
+	dev_dbg(&interface->dev, "connected " DRIVER_NAME "\n");
+
+	return 0;
+
+error_free:
+	usb_set_intfdata(interface, NULL);
+	diolan_u2c_free(dev);
+error:
+	return ret;
+}
+
+static void diolan_u2c_disconnect(struct usb_interface *interface)
+{
+	struct i2c_diolan_u2c *dev = usb_get_intfdata(interface);
+
+	i2c_del_adapter(&dev->adapter);
+	usb_set_intfdata(interface, NULL);
+	diolan_u2c_free(dev);
+
+	dev_dbg(&interface->dev, "disconnected\n");
+}
+
+static struct usb_driver diolan_u2c_driver = {
+	.name = DRIVER_NAME,
+	.probe = diolan_u2c_probe,
+	.disconnect = diolan_u2c_disconnect,
+	.id_table = diolan_u2c_table,
+};
+
+static int __init diolan_u2c_init(void)
+{
+	/* register this driver with the USB subsystem */
+	return usb_register(&diolan_u2c_driver);
+}
+
+static void __exit diolan_u2c_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&diolan_u2c_driver);
+}
+
+module_init(diolan_u2c_init);
+module_exit(diolan_u2c_exit);
+
+MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_DESCRIPTION(DRIVER_NAME " driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 50ea1f43bdc1..878a12026af2 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -132,6 +132,13 @@
 #define pch_pci_dbg(pdev, fmt, arg...)  \
 	dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
 
+/*
+Set the number of I2C instance max
+Intel EG20T PCH :		1ch
+OKI SEMICONDUCTOR ML7213 IOH :	2ch
+*/
+#define PCH_I2C_MAX_DEV			2
+
 /**
  * struct i2c_algo_pch_data - for I2C driver functionalities
  * @pch_adapter:		stores the reference to i2c_adapter structure
@@ -156,12 +163,14 @@ struct i2c_algo_pch_data {
  * @pch_data:		stores a list of i2c_algo_pch_data
  * @pch_i2c_suspended:	specifies whether the system is suspended or not
  *			perhaps with more lines and words.
+ * @ch_num:		specifies the number of i2c instance
  *
  * pch_data has as many elements as maximum I2C channels
  */
 struct adapter_info {
-	struct i2c_algo_pch_data pch_data;
+	struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV];
 	bool pch_i2c_suspended;
+	int ch_num;
 };
 
 
@@ -170,8 +179,13 @@ static int pch_clk = 50000;	/* specifies I2C clock speed in KHz */
 static wait_queue_head_t pch_event;
 static DEFINE_MUTEX(pch_mutex);
 
+/* Definition for ML7213 by OKI SEMICONDUCTOR */
+#define PCI_VENDOR_ID_ROHM		0x10DB
+#define PCI_DEVICE_ID_ML7213_I2C	0x802D
+
 static struct pci_device_id __devinitdata pch_pcidev_id[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_I2C)},
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C),   1, },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
 	{0,}
 };
 
@@ -212,8 +226,7 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap)
 	/* Initialize I2C registers */
 	iowrite32(0x21, p + PCH_I2CNF);
 
-	pch_setbit(adap->pch_base_address, PCH_I2CCTL,
-			  PCH_I2CCTL_I2CMEN);
+	pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN);
 
 	if (pch_i2c_speed != 400)
 		pch_i2c_speed = 100;
@@ -255,7 +268,7 @@ static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
  * @timeout:	waiting time counter (us).
  */
 static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
-				 s32 timeout)
+				     s32 timeout)
 {
 	void __iomem *p = adap->pch_base_address;
 
@@ -475,8 +488,8 @@ static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap)
  * @last:	specifies whether last message or not.
  * @first:	specifies whether first message or not.
  */
-s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
-		  u32 last, u32 first)
+static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
+			     u32 last, u32 first)
 {
 	struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
 
@@ -569,10 +582,10 @@ s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 }
 
 /**
- * pch_i2c_cb_ch0() - Interrupt handler Call back function
+ * pch_i2c_cb() - Interrupt handler Call back function
  * @adap:	Pointer to struct i2c_algo_pch_data.
  */
-static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap)
+static void pch_i2c_cb(struct i2c_algo_pch_data *adap)
 {
 	u32 sts;
 	void __iomem *p = adap->pch_base_address;
@@ -600,24 +613,30 @@ static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap)
  */
 static irqreturn_t pch_i2c_handler(int irq, void *pData)
 {
-	s32 reg_val;
+	u32 reg_val;
+	int flag;
+	int i;
+	struct adapter_info *adap_info = pData;
+	void __iomem *p;
+	u32 mode;
 
-	struct i2c_algo_pch_data *adap_data = (struct i2c_algo_pch_data *)pData;
-	void __iomem *p = adap_data->pch_base_address;
-	u32 mode = ioread32(p + PCH_I2CMOD) & (BUFFER_MODE | EEPROM_SR_MODE);
-
-	if (mode != NORMAL_MODE) {
-		pch_err(adap_data, "I2C mode is not supported\n");
-		return IRQ_NONE;
+	for (i = 0, flag = 0; i < adap_info->ch_num; i++) {
+		p = adap_info->pch_data[i].pch_base_address;
+		mode = ioread32(p + PCH_I2CMOD);
+		mode &= BUFFER_MODE | EEPROM_SR_MODE;
+		if (mode != NORMAL_MODE) {
+			pch_err(adap_info->pch_data,
+				"I2C-%d mode(%d) is not supported\n", mode, i);
+			continue;
+		}
+		reg_val = ioread32(p + PCH_I2CSR);
+		if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) {
+			pch_i2c_cb(&adap_info->pch_data[i]);
+			flag = 1;
+		}
 	}
 
-	reg_val = ioread32(p + PCH_I2CSR);
-	if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT))
-		pch_i2c_cb_ch0(adap_data);
-	else
-		return IRQ_NONE;
-
-	return IRQ_HANDLED;
+	return flag ? IRQ_HANDLED : IRQ_NONE;
 }
 
 /**
@@ -627,7 +646,7 @@ static irqreturn_t pch_i2c_handler(int irq, void *pData)
  * @num:	number of messages.
  */
 static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
-		    struct i2c_msg *msgs, s32 num)
+			struct i2c_msg *msgs, s32 num)
 {
 	struct i2c_msg *pmsg;
 	u32 i = 0;
@@ -710,11 +729,13 @@ static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap)
 }
 
 static int __devinit pch_i2c_probe(struct pci_dev *pdev,
-			       const struct pci_device_id *id)
+				   const struct pci_device_id *id)
 {
 	void __iomem *base_addr;
-	s32 ret;
+	int ret;
+	int i, j;
 	struct adapter_info *adap_info;
+	struct i2c_adapter *pch_adap;
 
 	pch_pci_dbg(pdev, "Entered.\n");
 
@@ -744,44 +765,48 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
 		goto err_pci_iomap;
 	}
 
-	adap_info->pch_i2c_suspended = false;
+	/* Set the number of I2C channel instance */
+	adap_info->ch_num = id->driver_data;
 
-	adap_info->pch_data.p_adapter_info = adap_info;
+	for (i = 0; i < adap_info->ch_num; i++) {
+		pch_adap = &adap_info->pch_data[i].pch_adapter;
+		adap_info->pch_i2c_suspended = false;
 
-	adap_info->pch_data.pch_adapter.owner = THIS_MODULE;
-	adap_info->pch_data.pch_adapter.class = I2C_CLASS_HWMON;
-	strcpy(adap_info->pch_data.pch_adapter.name, KBUILD_MODNAME);
-	adap_info->pch_data.pch_adapter.algo = &pch_algorithm;
-	adap_info->pch_data.pch_adapter.algo_data =
-						&adap_info->pch_data;
+		adap_info->pch_data[i].p_adapter_info = adap_info;
 
-	/* (i * 0x80) + base_addr; */
-	adap_info->pch_data.pch_base_address = base_addr;
+		pch_adap->owner = THIS_MODULE;
+		pch_adap->class = I2C_CLASS_HWMON;
+		strcpy(pch_adap->name, KBUILD_MODNAME);
+		pch_adap->algo = &pch_algorithm;
+		pch_adap->algo_data = &adap_info->pch_data[i];
 
-	adap_info->pch_data.pch_adapter.dev.parent = &pdev->dev;
+		/* base_addr + offset; */
+		adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i;
 
-	ret = i2c_add_adapter(&(adap_info->pch_data.pch_adapter));
+		pch_adap->dev.parent = &pdev->dev;
 
-	if (ret) {
-		pch_pci_err(pdev, "i2c_add_adapter FAILED\n");
-		goto err_i2c_add_adapter;
+		ret = i2c_add_adapter(pch_adap);
+		if (ret) {
+			pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
+			goto err_i2c_add_adapter;
+		}
+
+		pch_i2c_init(&adap_info->pch_data[i]);
 	}
-
-	pch_i2c_init(&adap_info->pch_data);
 	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
-		  KBUILD_MODNAME, &adap_info->pch_data);
+		  KBUILD_MODNAME, adap_info);
 	if (ret) {
 		pch_pci_err(pdev, "request_irq FAILED\n");
-		goto err_request_irq;
+		goto err_i2c_add_adapter;
 	}
 
 	pci_set_drvdata(pdev, adap_info);
 	pch_pci_dbg(pdev, "returns %d.\n", ret);
 	return 0;
 
-err_request_irq:
-	i2c_del_adapter(&(adap_info->pch_data.pch_adapter));
 err_i2c_add_adapter:
+	for (j = 0; j < i; j++)
+		i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
 	pci_iounmap(pdev, base_addr);
 err_pci_iomap:
 	pci_release_regions(pdev);
@@ -794,17 +819,22 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
 
 static void __devexit pch_i2c_remove(struct pci_dev *pdev)
 {
+	int i;
 	struct adapter_info *adap_info = pci_get_drvdata(pdev);
 
-	pch_i2c_disbl_int(&adap_info->pch_data);
-	free_irq(pdev->irq, &adap_info->pch_data);
-	i2c_del_adapter(&(adap_info->pch_data.pch_adapter));
+	free_irq(pdev->irq, adap_info);
 
-	if (adap_info->pch_data.pch_base_address) {
-		pci_iounmap(pdev, adap_info->pch_data.pch_base_address);
-		adap_info->pch_data.pch_base_address = 0;
+	for (i = 0; i < adap_info->ch_num; i++) {
+		pch_i2c_disbl_int(&adap_info->pch_data[i]);
+		i2c_del_adapter(&adap_info->pch_data[i].pch_adapter);
 	}
 
+	if (adap_info->pch_data[0].pch_base_address)
+		pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
+
+	for (i = 0; i < adap_info->ch_num; i++)
+		adap_info->pch_data[i].pch_base_address = 0;
+
 	pci_set_drvdata(pdev, NULL);
 
 	pci_release_regions(pdev);
@@ -817,17 +847,22 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev)
 static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	int ret;
+	int i;
 	struct adapter_info *adap_info = pci_get_drvdata(pdev);
-	void __iomem *p = adap_info->pch_data.pch_base_address;
+	void __iomem *p = adap_info->pch_data[0].pch_base_address;
 
 	adap_info->pch_i2c_suspended = true;
 
-	while ((adap_info->pch_data.pch_i2c_xfer_in_progress)) {
-		/* Wait until all channel transfers are completed */
-		msleep(20);
+	for (i = 0; i < adap_info->ch_num; i++) {
+		while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) {
+			/* Wait until all channel transfers are completed */
+			msleep(20);
+		}
 	}
+
 	/* Disable the i2c interrupts */
-	pch_i2c_disbl_int(&adap_info->pch_data);
+	for (i = 0; i < adap_info->ch_num; i++)
+		pch_i2c_disbl_int(&adap_info->pch_data[i]);
 
 	pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
 		"invoked function pch_i2c_disbl_int successfully\n",
@@ -850,6 +885,7 @@ static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
 
 static int pch_i2c_resume(struct pci_dev *pdev)
 {
+	int i;
 	struct adapter_info *adap_info = pci_get_drvdata(pdev);
 
 	pci_set_power_state(pdev, PCI_D0);
@@ -862,7 +898,8 @@ static int pch_i2c_resume(struct pci_dev *pdev)
 
 	pci_enable_wake(pdev, PCI_D3hot, 0);
 
-	pch_i2c_init(&adap_info->pch_data);
+	for (i = 0; i < adap_info->ch_num; i++)
+		pch_i2c_init(&adap_info->pch_data[i]);
 
 	adap_info->pch_i2c_suspended = false;
 
@@ -894,7 +931,7 @@ static void __exit pch_pci_exit(void)
 }
 module_exit(pch_pci_exit);
 
-MODULE_DESCRIPTION("PCH I2C PCI Driver");
+MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH I2C Driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.okisemi.com>");
 module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 8022e2390a5a..caf96dc8ca1b 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -118,6 +118,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
 {
 	mxs_reset_block(i2c->regs);
 	writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
+	writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
+			i2c->regs + MXS_I2C_QUEUECTRL_SET);
 }
 
 static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
@@ -347,8 +349,6 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
 
 	/* Do reset to enforce correct startup after pinmuxing */
 	mxs_i2c_reset(i2c);
-	writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
-			i2c->regs + MXS_I2C_QUEUECTRL_SET);
 
 	adap = &i2c->adapter;
 	strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c
new file mode 100644
index 000000000000..6659d269b841
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pxa-pci.c
@@ -0,0 +1,176 @@
+/*
+ * The CE4100's I2C device is more or less the same one as found on PXA.
+ * It does not support slave mode, the register slightly moved. This PCI
+ * device provides three bars, every contains a single I2C controller.
+ */
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/pxa-i2c.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+#define CE4100_PCI_I2C_DEVS	3
+
+struct ce4100_devices {
+	struct platform_device *pdev[CE4100_PCI_I2C_DEVS];
+};
+
+static struct platform_device *add_i2c_device(struct pci_dev *dev, int bar)
+{
+	struct platform_device *pdev;
+	struct i2c_pxa_platform_data pdata;
+	struct resource res[2];
+	struct device_node *child;
+	static int devnum;
+	int ret;
+
+	memset(&pdata, 0, sizeof(struct i2c_pxa_platform_data));
+	memset(&res, 0, sizeof(res));
+
+	res[0].flags = IORESOURCE_MEM;
+	res[0].start = pci_resource_start(dev, bar);
+	res[0].end = pci_resource_end(dev, bar);
+
+	res[1].flags = IORESOURCE_IRQ;
+	res[1].start = dev->irq;
+	res[1].end = dev->irq;
+
+	for_each_child_of_node(dev->dev.of_node, child) {
+		const void *prop;
+		struct resource r;
+		int ret;
+
+		ret = of_address_to_resource(child, 0, &r);
+		if (ret < 0)
+			continue;
+		if (r.start != res[0].start)
+			continue;
+		if (r.end != res[0].end)
+			continue;
+		if (r.flags != res[0].flags)
+			continue;
+
+		prop = of_get_property(child, "fast-mode", NULL);
+		if (prop)
+			pdata.fast_mode = 1;
+
+		break;
+	}
+
+	if (!child) {
+		dev_err(&dev->dev, "failed to match a DT node for bar %d.\n",
+				bar);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	pdev = platform_device_alloc("ce4100-i2c", devnum);
+	if (!pdev) {
+		of_node_put(child);
+		ret = -ENOMEM;
+		goto out;
+	}
+	pdev->dev.parent = &dev->dev;
+	pdev->dev.of_node = child;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto err;
+	devnum++;
+	return pdev;
+err:
+	platform_device_put(pdev);
+out:
+	return ERR_PTR(ret);
+}
+
+static int __devinit ce4100_i2c_probe(struct pci_dev *dev,
+		const struct pci_device_id *ent)
+{
+	int ret;
+	int i;
+	struct ce4100_devices *sds;
+
+	ret = pci_enable_device_mem(dev);
+	if (ret)
+		return ret;
+
+	if (!dev->dev.of_node) {
+		dev_err(&dev->dev, "Missing device tree node.\n");
+		return -EINVAL;
+	}
+	sds = kzalloc(sizeof(*sds), GFP_KERNEL);
+	if (!sds)
+		goto err_mem;
+
+	for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) {
+		sds->pdev[i] = add_i2c_device(dev, i);
+		if (IS_ERR(sds->pdev[i])) {
+			while (--i >= 0)
+				platform_device_unregister(sds->pdev[i]);
+			goto err_dev_add;
+		}
+	}
+	pci_set_drvdata(dev, sds);
+	return 0;
+
+err_dev_add:
+	pci_set_drvdata(dev, NULL);
+	kfree(sds);
+err_mem:
+	pci_disable_device(dev);
+	return ret;
+}
+
+static void __devexit ce4100_i2c_remove(struct pci_dev *dev)
+{
+	struct ce4100_devices *sds;
+	unsigned int i;
+
+	sds = pci_get_drvdata(dev);
+	pci_set_drvdata(dev, NULL);
+
+	for (i = 0; i < ARRAY_SIZE(sds->pdev); i++)
+		platform_device_unregister(sds->pdev[i]);
+
+	pci_disable_device(dev);
+	kfree(sds);
+}
+
+static struct pci_device_id ce4100_i2c_devices[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)},
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, ce4100_i2c_devices);
+
+static struct pci_driver ce4100_i2c_driver = {
+	.name           = "ce4100_i2c",
+	.id_table       = ce4100_i2c_devices,
+	.probe          = ce4100_i2c_probe,
+	.remove         = __devexit_p(ce4100_i2c_remove),
+};
+
+static int __init ce4100_i2c_init(void)
+{
+	return pci_register_driver(&ce4100_i2c_driver);
+}
+module_init(ce4100_i2c_init);
+
+static void __exit ce4100_i2c_exit(void)
+{
+	pci_unregister_driver(&ce4100_i2c_driver);
+}
+module_exit(ce4100_i2c_exit);
+
+MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index f4c19a97e0b3..f59224a5c761 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -29,38 +29,75 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/i2c-pxa.h>
+#include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/irq.h>
-#include <plat/i2c.h>
+
+#ifndef CONFIG_HAVE_CLK
+#define clk_get(dev, id)	NULL
+#define clk_put(clk)		do { } while (0)
+#define clk_disable(clk)	do { } while (0)
+#define clk_enable(clk)		do { } while (0)
+#endif
+
+struct pxa_reg_layout {
+	u32 ibmr;
+	u32 idbr;
+	u32 icr;
+	u32 isr;
+	u32 isar;
+};
+
+enum pxa_i2c_types {
+	REGS_PXA2XX,
+	REGS_PXA3XX,
+	REGS_CE4100,
+};
 
 /*
- * I2C register offsets will be shifted 0 or 1 bit left, depending on
- * different SoCs
+ * I2C registers definitions
  */
-#define REG_SHIFT_0	(0 << 0)
-#define REG_SHIFT_1	(1 << 0)
-#define REG_SHIFT(d)	((d) & 0x1)
+static struct pxa_reg_layout pxa_reg_layout[] = {
+	[REGS_PXA2XX] = {
+		.ibmr =	0x00,
+		.idbr =	0x08,
+		.icr =	0x10,
+		.isr =	0x18,
+		.isar =	0x20,
+	},
+	[REGS_PXA3XX] = {
+		.ibmr =	0x00,
+		.idbr =	0x04,
+		.icr =	0x08,
+		.isr =	0x0c,
+		.isar =	0x10,
+	},
+	[REGS_CE4100] = {
+		.ibmr =	0x14,
+		.idbr =	0x0c,
+		.icr =	0x00,
+		.isr =	0x04,
+		/* no isar register */
+	},
+};
 
 static const struct platform_device_id i2c_pxa_id_table[] = {
-	{ "pxa2xx-i2c",		REG_SHIFT_1 },
-	{ "pxa3xx-pwri2c",	REG_SHIFT_0 },
+	{ "pxa2xx-i2c",		REGS_PXA2XX },
+	{ "pxa3xx-pwri2c",	REGS_PXA3XX },
+	{ "ce4100-i2c",		REGS_CE4100 },
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
 
 /*
- * I2C registers and bit definitions
+ * I2C bit definitions
  */
-#define IBMR		(0x00)
-#define IDBR		(0x08)
-#define ICR		(0x10)
-#define ISR		(0x18)
-#define ISAR		(0x20)
 
 #define ICR_START	(1 << 0)	   /* start bit */
 #define ICR_STOP	(1 << 1)	   /* stop bit */
@@ -111,7 +148,11 @@ struct pxa_i2c {
 	u32			icrlog[32];
 
 	void __iomem		*reg_base;
-	unsigned int		reg_shift;
+	void __iomem		*reg_ibmr;
+	void __iomem		*reg_idbr;
+	void __iomem		*reg_icr;
+	void __iomem		*reg_isr;
+	void __iomem		*reg_isar;
 
 	unsigned long		iobase;
 	unsigned long		iosize;
@@ -121,11 +162,11 @@ struct pxa_i2c {
 	unsigned int		fast_mode :1;
 };
 
-#define _IBMR(i2c)	((i2c)->reg_base + (0x0 << (i2c)->reg_shift))
-#define _IDBR(i2c)	((i2c)->reg_base + (0x4 << (i2c)->reg_shift))
-#define _ICR(i2c)	((i2c)->reg_base + (0x8 << (i2c)->reg_shift))
-#define _ISR(i2c)	((i2c)->reg_base + (0xc << (i2c)->reg_shift))
-#define _ISAR(i2c)	((i2c)->reg_base + (0x10 << (i2c)->reg_shift))
+#define _IBMR(i2c)	((i2c)->reg_ibmr)
+#define _IDBR(i2c)	((i2c)->reg_idbr)
+#define _ICR(i2c)	((i2c)->reg_icr)
+#define _ISR(i2c)	((i2c)->reg_isr)
+#define _ISAR(i2c)	((i2c)->reg_isar)
 
 /*
  * I2C Slave mode address
@@ -418,7 +459,8 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
 	writel(I2C_ISR_INIT, _ISR(i2c));
 	writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
 
-	writel(i2c->slave_addr, _ISAR(i2c));
+	if (i2c->reg_isar)
+		writel(i2c->slave_addr, _ISAR(i2c));
 
 	/* set control register values */
 	writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
@@ -729,8 +771,10 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
 	 */
 	ret = i2c->msg_idx;
 
-	if (timeout == 0)
+	if (!timeout && i2c->msg_num) {
 		i2c_pxa_scream_blue_murder(i2c, "timeout");
+		ret = I2C_RETRY;
+	}
 
  out:
 	return ret;
@@ -915,11 +959,16 @@ static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
 	writel(icr, _ICR(i2c));
 }
 
+#define VALID_INT_SOURCE	(ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \
+				ISR_SAD | ISR_BED)
 static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
 {
 	struct pxa_i2c *i2c = dev_id;
 	u32 isr = readl(_ISR(i2c));
 
+	if (!(isr & VALID_INT_SOURCE))
+		return IRQ_NONE;
+
 	if (i2c_debug > 2 && 0) {
 		dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
 			__func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c)));
@@ -934,7 +983,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
 	/*
 	 * Always clear all pending IRQs.
 	 */
-	writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c));
+	writel(isr & VALID_INT_SOURCE, _ISR(i2c));
 
 	if (isr & ISR_SAD)
 		i2c_pxa_slave_start(i2c, isr);
@@ -1001,6 +1050,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	struct resource *res;
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
 	const struct platform_device_id *id = platform_get_device_id(dev);
+	enum pxa_i2c_types i2c_type = id->driver_data;
 	int ret;
 	int irq;
 
@@ -1044,7 +1094,13 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		ret = -EIO;
 		goto eremap;
 	}
-	i2c->reg_shift = REG_SHIFT(id->driver_data);
+
+	i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
+	i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
+	i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
+	i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
+	if (i2c_type != REGS_CE4100)
+		i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
 
 	i2c->iobase = res->start;
 	i2c->iosize = resource_size(res);
@@ -1072,7 +1128,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		i2c->adap.algo = &i2c_pxa_pio_algorithm;
 	} else {
 		i2c->adap.algo = &i2c_pxa_algorithm;
-		ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
+		ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED,
 				  i2c->adap.name, i2c);
 		if (ret)
 			goto ereqirq;
@@ -1082,12 +1138,19 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
 	i2c->adap.algo_data = i2c;
 	i2c->adap.dev.parent = &dev->dev;
+#ifdef CONFIG_OF
+	i2c->adap.dev.of_node = dev->dev.of_node;
+#endif
 
-	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (i2c_type == REGS_CE4100)
+		ret = i2c_add_adapter(&i2c->adap);
+	else
+		ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0) {
 		printk(KERN_INFO "I2C: Failed to add bus\n");
 		goto eadapt;
 	}
+	of_i2c_register_devices(&i2c->adap);
 
 	platform_set_drvdata(dev, i2c);
 
diff --git a/arch/arm/plat-pxa/include/plat/i2c.h b/include/linux/i2c/pxa-i2c.h
similarity index 100%
rename from arch/arm/plat-pxa/include/plat/i2c.h
rename to include/linux/i2c/pxa-i2c.h