mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 20:50:53 +07:00
mcp23s08: add i2c support
Add i2c bindings for the mcp230xx devices. This is quite a lot simpler
than the spi one as there's no funky sub addressing done (one struct
i2c_client per struct gpio_chip).
The mcp23s08_platform_data structure is reused for i2c, even though
only a single mcp23s08_chip_info structure is needed.
To use, simply fill out a platform_data structure and pass it in
i2c_board_info, E.G.:
static const struct mcp23s08_platform_data mcp23017_data = {
.chip[0] = {
.pullups = 0x00ff,
},
.base = 240,
};
static struct i2c_board_info __initdata i2c_devs[] = {
{ I2C_BOARD_INFO("mcp23017", 0x20),
.platform_data = &smartview_mcp23017_data, },
...
};
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Peter Korsgaard
Grant Likely
parent
d62b98f305
commit
752ad5e82d
@ -412,10 +412,11 @@ config GPIO_MAX7301
|
||||
GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
|
||||
|
||||
config GPIO_MCP23S08
|
||||
tristate "Microchip MCP23Sxx I/O expander"
|
||||
depends on SPI_MASTER
|
||||
tristate "Microchip MCP23xxx I/O expander"
|
||||
depends on SPI_MASTER || I2C
|
||||
help
|
||||
SPI driver for Microchip MCP23S08/MPC23S17 I/O expanders.
|
||||
SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
|
||||
I/O expanders.
|
||||
This provides a GPIO interface supporting inputs and outputs.
|
||||
|
||||
config GPIO_MC33880
|
||||
|
||||
@ -1,11 +1,12 @@
|
||||
/*
|
||||
* MCP23S08 SPI gpio expander driver
|
||||
* MCP23S08 SPI/GPIO gpio expander driver
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/mcp23s08.h>
|
||||
#include <linux/slab.h>
|
||||
@ -16,13 +17,13 @@
|
||||
*/
|
||||
#define MCP_TYPE_S08 0
|
||||
#define MCP_TYPE_S17 1
|
||||
#define MCP_TYPE_008 2
|
||||
#define MCP_TYPE_017 3
|
||||
|
||||
/* Registers are all 8 bits wide.
|
||||
*
|
||||
* The mcp23s17 has twice as many bits, and can be configured to work
|
||||
* with either 16 bit registers or with two adjacent 8 bit banks.
|
||||
*
|
||||
* Also, there are I2C versions of both chips.
|
||||
*/
|
||||
#define MCP_IODIR 0x00 /* init/reset: all ones */
|
||||
#define MCP_IPOL 0x01
|
||||
@ -73,6 +74,72 @@ struct mcp23s08_driver_data {
|
||||
struct mcp23s08 chip[];
|
||||
};
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
#ifdef CONFIG_I2C
|
||||
|
||||
static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg)
|
||||
{
|
||||
return i2c_smbus_read_byte_data(mcp->data, reg);
|
||||
}
|
||||
|
||||
static int mcp23008_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
||||
{
|
||||
return i2c_smbus_write_byte_data(mcp->data, reg, val);
|
||||
}
|
||||
|
||||
static int
|
||||
mcp23008_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
||||
{
|
||||
while (n--) {
|
||||
int ret = mcp23008_read(mcp, reg++);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*vals++ = ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mcp23017_read(struct mcp23s08 *mcp, unsigned reg)
|
||||
{
|
||||
return i2c_smbus_read_word_data(mcp->data, reg << 1);
|
||||
}
|
||||
|
||||
static int mcp23017_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
|
||||
{
|
||||
return i2c_smbus_write_word_data(mcp->data, reg << 1, val);
|
||||
}
|
||||
|
||||
static int
|
||||
mcp23017_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
|
||||
{
|
||||
while (n--) {
|
||||
int ret = mcp23017_read(mcp, reg++);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*vals++ = ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct mcp23s08_ops mcp23008_ops = {
|
||||
.read = mcp23008_read,
|
||||
.write = mcp23008_write,
|
||||
.read_regs = mcp23008_read_regs,
|
||||
};
|
||||
|
||||
static const struct mcp23s08_ops mcp23017_ops = {
|
||||
.read = mcp23017_read,
|
||||
.write = mcp23017_write,
|
||||
.read_regs = mcp23017_read_regs,
|
||||
};
|
||||
|
||||
#endif /* CONFIG_I2C */
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
#ifdef CONFIG_SPI_MASTER
|
||||
|
||||
static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
|
||||
@ -331,6 +398,20 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
|
||||
break;
|
||||
#endif /* CONFIG_SPI_MASTER */
|
||||
|
||||
#ifdef CONFIG_I2C
|
||||
case MCP_TYPE_008:
|
||||
mcp->ops = &mcp23008_ops;
|
||||
mcp->chip.ngpio = 8;
|
||||
mcp->chip.label = "mcp23008";
|
||||
break;
|
||||
|
||||
case MCP_TYPE_017:
|
||||
mcp->ops = &mcp23017_ops;
|
||||
mcp->chip.ngpio = 16;
|
||||
mcp->chip.label = "mcp23017";
|
||||
break;
|
||||
#endif /* CONFIG_I2C */
|
||||
|
||||
default:
|
||||
dev_err(dev, "invalid device type (%d)\n", type);
|
||||
return -EINVAL;
|
||||
@ -389,6 +470,91 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
|
||||
return status;
|
||||
}
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
#ifdef CONFIG_I2C
|
||||
|
||||
static int __devinit mcp230xx_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct mcp23s08_platform_data *pdata;
|
||||
struct mcp23s08 *mcp;
|
||||
int status;
|
||||
|
||||
pdata = client->dev.platform_data;
|
||||
if (!pdata || !gpio_is_valid(pdata->base)) {
|
||||
dev_dbg(&client->dev, "invalid or missing platform data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
mcp = kzalloc(sizeof *mcp, GFP_KERNEL);
|
||||
if (!mcp)
|
||||
return -ENOMEM;
|
||||
|
||||
status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
|
||||
id->driver_data, pdata->base,
|
||||
pdata->chip[0].pullups);
|
||||
if (status)
|
||||
goto fail;
|
||||
|
||||
i2c_set_clientdata(client, mcp);
|
||||
|
||||
return 0;
|
||||
|
||||
fail:
|
||||
kfree(mcp);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
static int __devexit mcp230xx_remove(struct i2c_client *client)
|
||||
{
|
||||
struct mcp23s08 *mcp = i2c_get_clientdata(client);
|
||||
int status;
|
||||
|
||||
status = gpiochip_remove(&mcp->chip);
|
||||
if (status == 0)
|
||||
kfree(mcp);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id mcp230xx_id[] = {
|
||||
{ "mcp23008", MCP_TYPE_008 },
|
||||
{ "mcp23017", MCP_TYPE_017 },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
|
||||
|
||||
static struct i2c_driver mcp230xx_driver = {
|
||||
.driver = {
|
||||
.name = "mcp230xx",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = mcp230xx_probe,
|
||||
.remove = __devexit_p(mcp230xx_remove),
|
||||
.id_table = mcp230xx_id,
|
||||
};
|
||||
|
||||
static int __init mcp23s08_i2c_init(void)
|
||||
{
|
||||
return i2c_add_driver(&mcp230xx_driver);
|
||||
}
|
||||
|
||||
static void mcp23s08_i2c_exit(void)
|
||||
{
|
||||
i2c_del_driver(&mcp230xx_driver);
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
static int __init mcp23s08_i2c_init(void) { return 0; }
|
||||
static void mcp23s08_i2c_exit(void) { }
|
||||
|
||||
#endif /* CONFIG_I2C */
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
#ifdef CONFIG_SPI_MASTER
|
||||
|
||||
static int mcp23s08_probe(struct spi_device *spi)
|
||||
@ -525,9 +691,24 @@ static void mcp23s08_spi_exit(void) { }
|
||||
|
||||
static int __init mcp23s08_init(void)
|
||||
{
|
||||
return mcp23s08_spi_init();
|
||||
int ret;
|
||||
|
||||
ret = mcp23s08_spi_init();
|
||||
if (ret)
|
||||
goto spi_fail;
|
||||
|
||||
ret = mcp23s08_i2c_init();
|
||||
if (ret)
|
||||
goto i2c_fail;
|
||||
|
||||
return 0;
|
||||
|
||||
i2c_fail:
|
||||
mcp23s08_spi_exit();
|
||||
spi_fail:
|
||||
return ret;
|
||||
}
|
||||
/* register after spi postcore initcall and before
|
||||
/* register after spi/i2c postcore initcall and before
|
||||
* subsys initcalls that may rely on these GPIOs
|
||||
*/
|
||||
subsys_initcall(mcp23s08_init);
|
||||
@ -535,6 +716,7 @@ subsys_initcall(mcp23s08_init);
|
||||
static void __exit mcp23s08_exit(void)
|
||||
{
|
||||
mcp23s08_spi_exit();
|
||||
mcp23s08_i2c_exit();
|
||||
}
|
||||
module_exit(mcp23s08_exit);
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user