intel-gtt: consolidate i830 setup

Slighlty reordered sequence was necessary. Also don't set
agp_bridge->gatt_bus_addr anymore. Only used by generic agp helper
functions, hence unnecessary for the intel fake agp driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This commit is contained in:
Daniel Vetter 2010-08-29 17:29:50 +02:00 committed by Chris Wilson
parent f67eab664c
commit 73800422a3

View File

@ -86,6 +86,8 @@ struct intel_gtt_driver {
unsigned int is_g33 : 1;
unsigned int is_pineview : 1;
unsigned int is_ironlake : 1;
/* Chipset specific GTT setup */
int (*setup)(void);
};
static struct _intel_private {
@ -95,6 +97,7 @@ static struct _intel_private {
struct pci_dev *bridge_dev;
u8 __iomem *registers;
phys_addr_t gtt_bus_addr;
phys_addr_t gma_bus_addr;
u32 __iomem *gtt; /* I915G */
int num_dcache_entries;
union {
@ -893,38 +896,60 @@ static void intel_i830_chipset_flush(struct agp_bridge_data *bridge)
printk(KERN_ERR "Timed out waiting for cache flush.\n");
}
static void intel_enable_gtt(void)
{
u32 ptetbl_addr, gma_addr;
u16 gmch_ctrl;
ptetbl_addr = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &gma_addr);
intel_private.gma_bus_addr = (gma_addr & PCI_BASE_ADDRESS_MEM_MASK);
pci_read_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, &gmch_ctrl);
gmch_ctrl |= I830_GMCH_ENABLED;
pci_write_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, gmch_ctrl);
writel(ptetbl_addr|I810_PGETBL_ENABLED, intel_private.registers+I810_PGETBL_CTL);
readl(intel_private.registers+I810_PGETBL_CTL); /* PCI Posting. */
}
static int i830_setup(void)
{
u32 reg_addr;
pci_read_config_dword(intel_private.pcidev, I810_MMADDR, &reg_addr);
reg_addr &= 0xfff80000;
intel_private.registers = ioremap(reg_addr, KB(64));
if (!intel_private.registers)
return -ENOMEM;
intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE;
intel_i830_setup_flush();
return 0;
}
/* The intel i830 automatically initializes the agp aperture during POST.
* Use the memory already set aside for in the GTT.
*/
static int intel_i830_create_gatt_table(struct agp_bridge_data *bridge)
{
int page_order, ret;
struct aper_size_info_fixed *size;
int num_entries;
u32 temp;
int ret;
size = agp_bridge->current_size;
page_order = size->page_order;
num_entries = size->num_entries;
agp_bridge->gatt_table_real = NULL;
pci_read_config_dword(intel_private.pcidev, I810_MMADDR, &temp);
temp &= 0xfff80000;
intel_private.registers = ioremap(temp, KB(64));
if (!intel_private.registers)
return -ENOMEM;
intel_private.gtt_bus_addr = temp + I810_PTE_BASE;
temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
ret = intel_private.driver->setup();
if (ret != 0)
return ret;
ret = intel_gtt_init();
if (ret != 0)
return ret;
agp_bridge->gatt_table_real = NULL;
agp_bridge->gatt_table = NULL;
agp_bridge->gatt_bus_addr = temp;
agp_bridge->gatt_bus_addr = 0;
return 0;
}
@ -939,25 +964,15 @@ static int intel_fake_agp_free_gatt_table(struct agp_bridge_data *bridge)
static int intel_i830_configure(void)
{
struct aper_size_info_fixed *current_size;
u32 temp;
u16 gmch_ctrl;
int i;
current_size = A_SIZE_FIX(agp_bridge->current_size);
intel_enable_gtt();
pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &temp);
agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
pci_read_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, &gmch_ctrl);
gmch_ctrl |= I830_GMCH_ENABLED;
pci_write_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, gmch_ctrl);
writel(agp_bridge->gatt_bus_addr|I810_PGETBL_ENABLED, intel_private.registers+I810_PGETBL_CTL);
readl(intel_private.registers+I810_PGETBL_CTL); /* PCI Posting. */
agp_bridge->gart_bus_addr = intel_private.gma_bus_addr;
if (agp_bridge->driver->needs_scratch_page) {
for (i = intel_private.base.gtt_stolen_entries; i < current_size->num_entries; i++) {
for (i = intel_private.base.gtt_stolen_entries;
i < intel_private.base.gtt_total_entries; i++) {
writel(agp_bridge->scratch_page, intel_private.gtt+i);
}
readl(intel_private.gtt+i-1); /* PCI Posting. */
@ -965,7 +980,6 @@ static int intel_i830_configure(void)
global_cache_flush();
intel_i830_setup_flush();
return 0;
}
@ -1584,6 +1598,7 @@ static const struct agp_bridge_driver intel_g33_driver = {
static const struct intel_gtt_driver i8xx_gtt_driver = {
.gen = 2,
.setup = i830_setup,
};
static const struct intel_gtt_driver i915_gtt_driver = {
.gen = 3,