mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 21:00:53 +07:00
ASoC: Implement interrupt driven microphone detection for WM8903
Support use of the WM8903 IRQ for reporting of microphone presence and short detection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Mark Brown
parent
8abd16a65d
commit
7245387e36
@ -241,6 +241,8 @@ struct wm8903_platform_data {
|
||||
*/
|
||||
u16 micdet_cfg;
|
||||
|
||||
int micdet_delay; /* Delay after microphone detection (ms) */
|
||||
|
||||
u32 gpio_cfg[5]; /* Default register values for GPIO pin mux */
|
||||
};
|
||||
|
||||
|
||||
@ -23,6 +23,7 @@
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <sound/core.h>
|
||||
#include <sound/jack.h>
|
||||
#include <sound/pcm.h>
|
||||
#include <sound/pcm_params.h>
|
||||
#include <sound/tlv.h>
|
||||
@ -223,6 +224,12 @@ struct wm8903_priv {
|
||||
|
||||
struct completion wseq;
|
||||
|
||||
struct snd_soc_jack *mic_jack;
|
||||
int mic_det;
|
||||
int mic_short;
|
||||
int mic_last_report;
|
||||
int mic_delay;
|
||||
|
||||
struct snd_pcm_substream *master_substream;
|
||||
struct snd_pcm_substream *slave_substream;
|
||||
};
|
||||
@ -1437,19 +1444,112 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
|
||||
*
|
||||
* @codec: WM8903 codec
|
||||
* @jack: jack to report detection events on
|
||||
* @det: value to report for presence detection
|
||||
* @shrt: value to report for short detection
|
||||
*
|
||||
* Enable microphone detection via IRQ on the WM8903. If GPIOs are
|
||||
* being used to bring out signals to the processor then only platform
|
||||
* data configuration is needed for WM8903 and processor GPIOs should
|
||||
* be configured using snd_soc_jack_add_gpios() instead.
|
||||
*
|
||||
* The current threasholds for detection should be configured using
|
||||
* micdet_cfg in the platform data. Using this function will force on
|
||||
* the microphone bias for the device.
|
||||
*/
|
||||
int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
|
||||
int det, int shrt)
|
||||
{
|
||||
struct wm8903_priv *wm8903 = codec->private_data;
|
||||
int irq_mask = 0;
|
||||
|
||||
dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n",
|
||||
det, shrt);
|
||||
|
||||
/* Store the configuration */
|
||||
wm8903->mic_jack = jack;
|
||||
wm8903->mic_det = det;
|
||||
wm8903->mic_short = shrt;
|
||||
|
||||
/* Enable interrupts we've got a report configured for */
|
||||
if (det)
|
||||
irq_mask &= ~WM8903_MICDET_EINT;
|
||||
if (shrt)
|
||||
irq_mask &= ~WM8903_MICSHRT_EINT;
|
||||
|
||||
snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
|
||||
WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
|
||||
irq_mask);
|
||||
|
||||
/* Enable mic detection, this may not have been set through
|
||||
* platform data (eg, if the defaults are OK). */
|
||||
snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
|
||||
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
|
||||
snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
|
||||
WM8903_MICDET_ENA, WM8903_MICDET_ENA);
|
||||
|
||||
/* Force the microphone bias on; this will trigger an initial
|
||||
* detection. */
|
||||
snd_soc_dapm_force_enable_pin(codec, "Mic Bias");
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(wm8903_mic_detect);
|
||||
|
||||
static irqreturn_t wm8903_irq(int irq, void *data)
|
||||
{
|
||||
struct wm8903_priv *wm8903 = data;
|
||||
struct snd_soc_codec *codec = &wm8903->codec;
|
||||
int reg;
|
||||
int mic_report;
|
||||
int int_pol;
|
||||
int int_val = 0;
|
||||
int mask = ~snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1_MASK);
|
||||
|
||||
reg = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1);
|
||||
int_val = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1) & mask;
|
||||
|
||||
if (reg & WM8903_WSEQ_BUSY_EINT) {
|
||||
if (int_val & WM8903_WSEQ_BUSY_EINT) {
|
||||
dev_dbg(codec->dev, "Write sequencer done\n");
|
||||
complete(&wm8903->wseq);
|
||||
}
|
||||
|
||||
/*
|
||||
* The rest is microphone jack detection. We need to manually
|
||||
* invert the polarity of the interrupt after each event - to
|
||||
* simplify the code keep track of the last state we reported
|
||||
* and just invert the relevant bits in both the report and
|
||||
* the polarity register.
|
||||
*/
|
||||
mic_report = wm8903->mic_last_report;
|
||||
int_pol = snd_soc_read(codec, WM8903_INTERRUPT_POLARITY_1);
|
||||
|
||||
if (int_val & WM8903_MICSHRT_EINT) {
|
||||
dev_dbg(codec->dev, "Microphone short (pol=%x)\n", int_pol);
|
||||
|
||||
mic_report ^= wm8903->mic_short;
|
||||
int_pol ^= WM8903_MICSHRT_INV;
|
||||
}
|
||||
|
||||
if (int_val & WM8903_MICDET_EINT) {
|
||||
dev_dbg(codec->dev, "Microphone detect (pol=%x)\n", int_pol);
|
||||
|
||||
mic_report ^= wm8903->mic_det;
|
||||
int_pol ^= WM8903_MICDET_INV;
|
||||
|
||||
msleep(wm8903->mic_delay);
|
||||
}
|
||||
|
||||
snd_soc_update_bits(codec, WM8903_INTERRUPT_POLARITY_1,
|
||||
WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol);
|
||||
|
||||
snd_soc_jack_report(wm8903->mic_jack, mic_report,
|
||||
wm8903->mic_short | wm8903->mic_det);
|
||||
|
||||
wm8903->mic_last_report = mic_report;
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
|
||||
@ -18,6 +18,10 @@
|
||||
extern struct snd_soc_dai wm8903_dai;
|
||||
extern struct snd_soc_codec_device soc_codec_dev_wm8903;
|
||||
|
||||
extern int wm8903_mic_detect(struct snd_soc_codec *codec,
|
||||
struct snd_soc_jack *jack,
|
||||
int det, int shrt);
|
||||
|
||||
#define WM8903_MCLK_DIV_2 1
|
||||
#define WM8903_CLK_SYS 2
|
||||
#define WM8903_BCLK 3
|
||||
|
||||
Loading…
Reference in New Issue
Block a user