mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 18:20:52 +07:00
hwmon: (adm1275) Add support for ADM1278
ADM1278 is mostly compatible to other chips of the same series. Besides the usual difference in coefficients, it supports a temperature sensor, and it can measure both input and output voltage at the same time. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
parent
54ce3a0d80
commit
709066acdd
@ -14,6 +14,10 @@ Supported chips:
|
||||
Prefix: 'adm1276'
|
||||
Addresses scanned: -
|
||||
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
|
||||
* Analog Devices ADM1278
|
||||
Prefix: 'adm1278'
|
||||
Addresses scanned: -
|
||||
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
|
||||
* Analog Devices ADM1293/ADM1294
|
||||
Prefix: 'adm1293', 'adm1294'
|
||||
Addresses scanned: -
|
||||
@ -26,12 +30,14 @@ Description
|
||||
-----------
|
||||
|
||||
This driver supports hardware monitoring for Analog Devices ADM1075, ADM1275,
|
||||
ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
|
||||
ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and Digital
|
||||
Power Monitors.
|
||||
|
||||
ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
|
||||
allow a circuit board to be removed from or inserted into a live backplane.
|
||||
They also feature current and voltage readback via an integrated 12
|
||||
bit analog-to-digital converter (ADC), accessed using a PMBus interface.
|
||||
ADM1075, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
|
||||
controllers that allow a circuit board to be removed from or inserted into
|
||||
a live backplane. They also feature current and voltage readback via an
|
||||
integrated 12 bit analog-to-digital converter (ADC), accessed using a
|
||||
PMBus interface.
|
||||
|
||||
The driver is a client driver to the core PMBus driver. Please see
|
||||
Documentation/hwmon/pmbus for details on PMBus client drivers.
|
||||
@ -96,3 +102,14 @@ power1_reset_history Write any value to reset history.
|
||||
|
||||
Power attributes are supported on ADM1075, ADM1276,
|
||||
ADM1293, and ADM1294.
|
||||
|
||||
temp1_input Chip temperature.
|
||||
Temperature attributes are only available on ADM1278.
|
||||
temp1_max Maximum chip temperature.
|
||||
temp1_max_alarm Temperature alarm.
|
||||
temp1_crit Critical chip temperature.
|
||||
temp1_crit_alarm Critical temperature high alarm.
|
||||
temp1_highest Highest observed temperature.
|
||||
temp1_reset_history Write any value to reset history.
|
||||
|
||||
Temperature attributes are supported on ADM1278.
|
||||
|
||||
@ -31,8 +31,8 @@ config SENSORS_ADM1275
|
||||
default n
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for Analog
|
||||
Devices ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 Hot-Swap
|
||||
Controller and Digital Power Monitors.
|
||||
Devices ADM1075, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294
|
||||
Hot-Swap Controller and Digital Power Monitors.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called adm1275.
|
||||
|
||||
@ -24,7 +24,7 @@
|
||||
#include <linux/bitops.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
|
||||
enum chips { adm1075, adm1275, adm1276, adm1278, adm1293, adm1294 };
|
||||
|
||||
#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
|
||||
#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
|
||||
@ -41,6 +41,10 @@ enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
|
||||
#define ADM1075_IRANGE_25 BIT(3)
|
||||
#define ADM1075_IRANGE_MASK (BIT(3) | BIT(4))
|
||||
|
||||
#define ADM1278_TEMP1_EN BIT(3)
|
||||
#define ADM1278_VIN_EN BIT(2)
|
||||
#define ADM1278_VOUT_EN BIT(1)
|
||||
|
||||
#define ADM1293_IRANGE_25 0
|
||||
#define ADM1293_IRANGE_50 BIT(6)
|
||||
#define ADM1293_IRANGE_100 BIT(7)
|
||||
@ -54,6 +58,7 @@ enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
|
||||
|
||||
#define ADM1293_VAUX_EN BIT(1)
|
||||
|
||||
#define ADM1278_PEAK_TEMP 0xd7
|
||||
#define ADM1275_IOUT_WARN2_LIMIT 0xd7
|
||||
#define ADM1275_DEVICE_CONFIG 0xd8
|
||||
|
||||
@ -80,6 +85,7 @@ struct adm1275_data {
|
||||
bool have_iout_min;
|
||||
bool have_pin_min;
|
||||
bool have_pin_max;
|
||||
bool have_temp_max;
|
||||
struct pmbus_driver_info info;
|
||||
};
|
||||
|
||||
@ -113,6 +119,13 @@ static const struct coefficients adm1276_coefficients[] = {
|
||||
[4] = { 2115, 0, -1 }, /* power, vrange not set */
|
||||
};
|
||||
|
||||
static const struct coefficients adm1278_coefficients[] = {
|
||||
[0] = { 19599, 0, -2 }, /* voltage */
|
||||
[1] = { 800, 20475, -1 }, /* current */
|
||||
[2] = { 6123, 0, -2 }, /* power */
|
||||
[3] = { 42, 31880, -1 }, /* temperature */
|
||||
};
|
||||
|
||||
static const struct coefficients adm1293_coefficients[] = {
|
||||
[0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */
|
||||
[1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */
|
||||
@ -196,6 +209,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
|
||||
return -ENXIO;
|
||||
ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
|
||||
break;
|
||||
case PMBUS_VIRT_READ_TEMP_MAX:
|
||||
if (!data->have_temp_max)
|
||||
return -ENXIO;
|
||||
ret = pmbus_read_word_data(client, 0, ADM1278_PEAK_TEMP);
|
||||
break;
|
||||
case PMBUS_VIRT_RESET_IOUT_HISTORY:
|
||||
case PMBUS_VIRT_RESET_VOUT_HISTORY:
|
||||
case PMBUS_VIRT_RESET_VIN_HISTORY:
|
||||
@ -204,6 +222,10 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
|
||||
if (!data->have_pin_max)
|
||||
return -ENXIO;
|
||||
break;
|
||||
case PMBUS_VIRT_RESET_TEMP_HISTORY:
|
||||
if (!data->have_temp_max)
|
||||
return -ENXIO;
|
||||
break;
|
||||
default:
|
||||
ret = -ENODATA;
|
||||
break;
|
||||
@ -245,6 +267,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
|
||||
ret = pmbus_write_word_data(client, 0,
|
||||
ADM1293_PIN_MIN, 0);
|
||||
break;
|
||||
case PMBUS_VIRT_RESET_TEMP_HISTORY:
|
||||
ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0);
|
||||
break;
|
||||
default:
|
||||
ret = -ENODATA;
|
||||
break;
|
||||
@ -312,6 +337,7 @@ static const struct i2c_device_id adm1275_id[] = {
|
||||
{ "adm1075", adm1075 },
|
||||
{ "adm1275", adm1275 },
|
||||
{ "adm1276", adm1276 },
|
||||
{ "adm1278", adm1278 },
|
||||
{ "adm1293", adm1293 },
|
||||
{ "adm1294", adm1294 },
|
||||
{ }
|
||||
@ -329,6 +355,7 @@ static int adm1275_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *mid;
|
||||
const struct coefficients *coefficients;
|
||||
int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
|
||||
int tindex = -1;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_READ_BYTE_DATA
|
||||
@ -386,6 +413,7 @@ static int adm1275_probe(struct i2c_client *client,
|
||||
info->format[PSC_VOLTAGE_OUT] = direct;
|
||||
info->format[PSC_CURRENT_OUT] = direct;
|
||||
info->format[PSC_POWER] = direct;
|
||||
info->format[PSC_TEMPERATURE] = direct;
|
||||
info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
|
||||
|
||||
info->read_word_data = adm1275_read_word_data;
|
||||
@ -460,6 +488,27 @@ static int adm1275_probe(struct i2c_client *client,
|
||||
info->func[0] |=
|
||||
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
|
||||
break;
|
||||
case adm1278:
|
||||
data->have_vout = true;
|
||||
data->have_pin_max = true;
|
||||
data->have_temp_max = true;
|
||||
|
||||
coefficients = adm1278_coefficients;
|
||||
vindex = 0;
|
||||
cindex = 1;
|
||||
pindex = 2;
|
||||
tindex = 3;
|
||||
|
||||
info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT;
|
||||
if (config & ADM1278_TEMP1_EN)
|
||||
info->func[0] |=
|
||||
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
||||
if (config & ADM1278_VIN_EN)
|
||||
info->func[0] |= PMBUS_HAVE_VIN;
|
||||
if (config & ADM1278_VOUT_EN)
|
||||
info->func[0] |=
|
||||
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
|
||||
break;
|
||||
case adm1293:
|
||||
case adm1294:
|
||||
data->have_iout_min = true;
|
||||
@ -537,6 +586,11 @@ static int adm1275_probe(struct i2c_client *client,
|
||||
info->b[PSC_POWER] = coefficients[pindex].b;
|
||||
info->R[PSC_POWER] = coefficients[pindex].R;
|
||||
}
|
||||
if (tindex >= 0) {
|
||||
info->m[PSC_TEMPERATURE] = coefficients[tindex].m;
|
||||
info->b[PSC_TEMPERATURE] = coefficients[tindex].b;
|
||||
info->R[PSC_TEMPERATURE] = coefficients[tindex].R;
|
||||
}
|
||||
|
||||
return pmbus_do_probe(client, id, info);
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user