mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 11:10:53 +07:00
net: phy: add amlogic g12a mdio mux support
Add support for the mdio mux and internal phy glue of the g12a SoC family Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # clk parts Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Jerome Brunet
David S. Miller
parent
867934e9c9
commit
7090425104
@ -76,6 +76,17 @@ config MDIO_BUS_MUX_GPIO
|
||||
several child MDIO busses to a parent bus. Child bus
|
||||
selection is under the control of GPIO lines.
|
||||
|
||||
config MDIO_BUS_MUX_MESON_G12A
|
||||
tristate "Amlogic G12a based MDIO bus multiplexer"
|
||||
depends on ARCH_MESON || COMPILE_TEST
|
||||
depends on OF_MDIO && HAS_IOMEM && COMMON_CLK
|
||||
select MDIO_BUS_MUX
|
||||
default m if ARCH_MESON
|
||||
help
|
||||
This module provides a driver for the MDIO multiplexer/glue of
|
||||
the amlogic g12a SoC. The multiplexers connects either the external
|
||||
or the internal MDIO bus to the parent bus.
|
||||
|
||||
config MDIO_BUS_MUX_MMIOREG
|
||||
tristate "MMIO device-controlled MDIO bus multiplexers"
|
||||
depends on OF_MDIO && HAS_IOMEM
|
||||
|
||||
@ -28,6 +28,7 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
||||
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
|
||||
obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
|
||||
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
|
||||
obj-$(CONFIG_MDIO_BUS_MUX_MESON_G12A) += mdio-mux-meson-g12a.o
|
||||
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
|
||||
obj-$(CONFIG_MDIO_BUS_MUX_MULTIPLEXER) += mdio-mux-multiplexer.o
|
||||
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
|
||||
|
||||
380
drivers/net/phy/mdio-mux-meson-g12a.c
Normal file
380
drivers/net/phy/mdio-mux-meson-g12a.c
Normal file
@ -0,0 +1,380 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/* Copyright (c) 2019 Baylibre, SAS.
|
||||
* Author: Jerome Brunet <jbrunet@baylibre.com>
|
||||
*/
|
||||
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/clk-provider.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/iopoll.h>
|
||||
#include <linux/mdio-mux.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#define ETH_PLL_STS 0x40
|
||||
#define ETH_PLL_CTL0 0x44
|
||||
#define PLL_CTL0_LOCK_DIG BIT(30)
|
||||
#define PLL_CTL0_RST BIT(29)
|
||||
#define PLL_CTL0_EN BIT(28)
|
||||
#define PLL_CTL0_SEL BIT(23)
|
||||
#define PLL_CTL0_N GENMASK(14, 10)
|
||||
#define PLL_CTL0_M GENMASK(8, 0)
|
||||
#define PLL_LOCK_TIMEOUT 1000000
|
||||
#define PLL_MUX_NUM_PARENT 2
|
||||
#define ETH_PLL_CTL1 0x48
|
||||
#define ETH_PLL_CTL2 0x4c
|
||||
#define ETH_PLL_CTL3 0x50
|
||||
#define ETH_PLL_CTL4 0x54
|
||||
#define ETH_PLL_CTL5 0x58
|
||||
#define ETH_PLL_CTL6 0x5c
|
||||
#define ETH_PLL_CTL7 0x60
|
||||
|
||||
#define ETH_PHY_CNTL0 0x80
|
||||
#define EPHY_G12A_ID 0x33000180
|
||||
#define ETH_PHY_CNTL1 0x84
|
||||
#define PHY_CNTL1_ST_MODE GENMASK(2, 0)
|
||||
#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3)
|
||||
#define EPHY_DFLT_ADD 8
|
||||
#define PHY_CNTL1_MII_MODE GENMASK(15, 14)
|
||||
#define EPHY_MODE_RMII 0x1
|
||||
#define PHY_CNTL1_CLK_EN BIT(16)
|
||||
#define PHY_CNTL1_CLKFREQ BIT(17)
|
||||
#define PHY_CNTL1_PHY_ENB BIT(18)
|
||||
#define ETH_PHY_CNTL2 0x88
|
||||
#define PHY_CNTL2_USE_INTERNAL BIT(5)
|
||||
#define PHY_CNTL2_SMI_SRC_MAC BIT(6)
|
||||
#define PHY_CNTL2_RX_CLK_EPHY BIT(9)
|
||||
|
||||
#define MESON_G12A_MDIO_EXTERNAL_ID 0
|
||||
#define MESON_G12A_MDIO_INTERNAL_ID 1
|
||||
|
||||
struct g12a_mdio_mux {
|
||||
bool pll_is_enabled;
|
||||
void __iomem *regs;
|
||||
void *mux_handle;
|
||||
struct clk *pclk;
|
||||
struct clk *pll;
|
||||
};
|
||||
|
||||
struct g12a_ephy_pll {
|
||||
void __iomem *base;
|
||||
struct clk_hw hw;
|
||||
};
|
||||
|
||||
#define g12a_ephy_pll_to_dev(_hw) \
|
||||
container_of(_hw, struct g12a_ephy_pll, hw)
|
||||
|
||||
static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw,
|
||||
unsigned long parent_rate)
|
||||
{
|
||||
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
||||
u32 val, m, n;
|
||||
|
||||
val = readl(pll->base + ETH_PLL_CTL0);
|
||||
m = FIELD_GET(PLL_CTL0_M, val);
|
||||
n = FIELD_GET(PLL_CTL0_N, val);
|
||||
|
||||
return parent_rate * m / n;
|
||||
}
|
||||
|
||||
static int g12a_ephy_pll_enable(struct clk_hw *hw)
|
||||
{
|
||||
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
||||
u32 val = readl(pll->base + ETH_PLL_CTL0);
|
||||
|
||||
/* Apply both enable an reset */
|
||||
val |= PLL_CTL0_RST | PLL_CTL0_EN;
|
||||
writel(val, pll->base + ETH_PLL_CTL0);
|
||||
|
||||
/* Clear the reset to let PLL lock */
|
||||
val &= ~PLL_CTL0_RST;
|
||||
writel(val, pll->base + ETH_PLL_CTL0);
|
||||
|
||||
/* Poll on the digital lock instead of the usual analog lock
|
||||
* This is done because bit 31 is unreliable on some SoC. Bit
|
||||
* 31 may indicate that the PLL is not lock eventhough the clock
|
||||
* is actually running
|
||||
*/
|
||||
return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val,
|
||||
val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT);
|
||||
}
|
||||
|
||||
static void g12a_ephy_pll_disable(struct clk_hw *hw)
|
||||
{
|
||||
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
||||
u32 val;
|
||||
|
||||
val = readl(pll->base + ETH_PLL_CTL0);
|
||||
val &= ~PLL_CTL0_EN;
|
||||
val |= PLL_CTL0_RST;
|
||||
writel(val, pll->base + ETH_PLL_CTL0);
|
||||
}
|
||||
|
||||
static int g12a_ephy_pll_is_enabled(struct clk_hw *hw)
|
||||
{
|
||||
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
||||
unsigned int val;
|
||||
|
||||
val = readl(pll->base + ETH_PLL_CTL0);
|
||||
|
||||
return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0;
|
||||
}
|
||||
|
||||
static void g12a_ephy_pll_init(struct clk_hw *hw)
|
||||
{
|
||||
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
||||
|
||||
/* Apply PLL HW settings */
|
||||
writel(0x29c0040a, pll->base + ETH_PLL_CTL0);
|
||||
writel(0x927e0000, pll->base + ETH_PLL_CTL1);
|
||||
writel(0xac5f49e5, pll->base + ETH_PLL_CTL2);
|
||||
writel(0x00000000, pll->base + ETH_PLL_CTL3);
|
||||
writel(0x00000000, pll->base + ETH_PLL_CTL4);
|
||||
writel(0x20200000, pll->base + ETH_PLL_CTL5);
|
||||
writel(0x0000c002, pll->base + ETH_PLL_CTL6);
|
||||
writel(0x00000023, pll->base + ETH_PLL_CTL7);
|
||||
}
|
||||
|
||||
static const struct clk_ops g12a_ephy_pll_ops = {
|
||||
.recalc_rate = g12a_ephy_pll_recalc_rate,
|
||||
.is_enabled = g12a_ephy_pll_is_enabled,
|
||||
.enable = g12a_ephy_pll_enable,
|
||||
.disable = g12a_ephy_pll_disable,
|
||||
.init = g12a_ephy_pll_init,
|
||||
};
|
||||
|
||||
static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* Enable the phy clock */
|
||||
if (!priv->pll_is_enabled) {
|
||||
ret = clk_prepare_enable(priv->pll);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
priv->pll_is_enabled = true;
|
||||
|
||||
/* Initialize ephy control */
|
||||
writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0);
|
||||
writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
|
||||
FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
|
||||
FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
|
||||
PHY_CNTL1_CLK_EN |
|
||||
PHY_CNTL1_CLKFREQ |
|
||||
PHY_CNTL1_PHY_ENB,
|
||||
priv->regs + ETH_PHY_CNTL1);
|
||||
writel(PHY_CNTL2_USE_INTERNAL |
|
||||
PHY_CNTL2_SMI_SRC_MAC |
|
||||
PHY_CNTL2_RX_CLK_EPHY,
|
||||
priv->regs + ETH_PHY_CNTL2);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv)
|
||||
{
|
||||
/* Reset the mdio bus mux */
|
||||
writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2);
|
||||
|
||||
/* Disable the phy clock if enabled */
|
||||
if (priv->pll_is_enabled) {
|
||||
clk_disable_unprepare(priv->pll);
|
||||
priv->pll_is_enabled = false;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int g12a_mdio_switch_fn(int current_child, int desired_child,
|
||||
void *data)
|
||||
{
|
||||
struct g12a_mdio_mux *priv = dev_get_drvdata(data);
|
||||
|
||||
if (current_child == desired_child)
|
||||
return 0;
|
||||
|
||||
switch (desired_child) {
|
||||
case MESON_G12A_MDIO_EXTERNAL_ID:
|
||||
return g12a_enable_external_mdio(priv);
|
||||
case MESON_G12A_MDIO_INTERNAL_ID:
|
||||
return g12a_enable_internal_mdio(priv);
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct of_device_id g12a_mdio_mux_match[] = {
|
||||
{ .compatible = "amlogic,g12a-mdio-mux", },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match);
|
||||
|
||||
static int g12a_ephy_glue_clk_register(struct device *dev)
|
||||
{
|
||||
struct g12a_mdio_mux *priv = dev_get_drvdata(dev);
|
||||
const char *parent_names[PLL_MUX_NUM_PARENT];
|
||||
struct clk_init_data init;
|
||||
struct g12a_ephy_pll *pll;
|
||||
struct clk_mux *mux;
|
||||
struct clk *clk;
|
||||
char *name;
|
||||
int i;
|
||||
|
||||
/* get the mux parents */
|
||||
for (i = 0; i < PLL_MUX_NUM_PARENT; i++) {
|
||||
char in_name[8];
|
||||
|
||||
snprintf(in_name, sizeof(in_name), "clkin%d", i);
|
||||
clk = devm_clk_get(dev, in_name);
|
||||
if (IS_ERR(clk)) {
|
||||
if (PTR_ERR(clk) != -EPROBE_DEFER)
|
||||
dev_err(dev, "Missing clock %s\n", in_name);
|
||||
return PTR_ERR(clk);
|
||||
}
|
||||
|
||||
parent_names[i] = __clk_get_name(clk);
|
||||
}
|
||||
|
||||
/* create the input mux */
|
||||
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
|
||||
if (!mux)
|
||||
return -ENOMEM;
|
||||
|
||||
name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev));
|
||||
if (!name)
|
||||
return -ENOMEM;
|
||||
|
||||
init.name = name;
|
||||
init.ops = &clk_mux_ro_ops;
|
||||
init.flags = 0;
|
||||
init.parent_names = parent_names;
|
||||
init.num_parents = PLL_MUX_NUM_PARENT;
|
||||
|
||||
mux->reg = priv->regs + ETH_PLL_CTL0;
|
||||
mux->shift = __ffs(PLL_CTL0_SEL);
|
||||
mux->mask = PLL_CTL0_SEL >> mux->shift;
|
||||
mux->hw.init = &init;
|
||||
|
||||
clk = devm_clk_register(dev, &mux->hw);
|
||||
kfree(name);
|
||||
if (IS_ERR(clk)) {
|
||||
dev_err(dev, "failed to register input mux\n");
|
||||
return PTR_ERR(clk);
|
||||
}
|
||||
|
||||
/* create the pll */
|
||||
pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
|
||||
if (!pll)
|
||||
return -ENOMEM;
|
||||
|
||||
name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev));
|
||||
if (!name)
|
||||
return -ENOMEM;
|
||||
|
||||
init.name = name;
|
||||
init.ops = &g12a_ephy_pll_ops;
|
||||
init.flags = 0;
|
||||
parent_names[0] = __clk_get_name(clk);
|
||||
init.parent_names = parent_names;
|
||||
init.num_parents = 1;
|
||||
|
||||
pll->base = priv->regs;
|
||||
pll->hw.init = &init;
|
||||
|
||||
clk = devm_clk_register(dev, &pll->hw);
|
||||
kfree(name);
|
||||
if (IS_ERR(clk)) {
|
||||
dev_err(dev, "failed to register input mux\n");
|
||||
return PTR_ERR(clk);
|
||||
}
|
||||
|
||||
priv->pll = clk;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int g12a_mdio_mux_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct g12a_mdio_mux *priv;
|
||||
struct resource *res;
|
||||
int ret;
|
||||
|
||||
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(pdev, priv);
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
priv->regs = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(priv->regs))
|
||||
return PTR_ERR(priv->regs);
|
||||
|
||||
priv->pclk = devm_clk_get(dev, "pclk");
|
||||
if (IS_ERR(priv->pclk)) {
|
||||
ret = PTR_ERR(priv->pclk);
|
||||
if (ret != -EPROBE_DEFER)
|
||||
dev_err(dev, "failed to get peripheral clock\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Make sure the device registers are clocked */
|
||||
ret = clk_prepare_enable(priv->pclk);
|
||||
if (ret) {
|
||||
dev_err(dev, "failed to enable peripheral clock");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Register PLL in CCF */
|
||||
ret = g12a_ephy_glue_clk_register(dev);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn,
|
||||
&priv->mux_handle, dev, NULL);
|
||||
if (ret) {
|
||||
if (ret != -EPROBE_DEFER)
|
||||
dev_err(dev, "mdio multiplexer init failed: %d", ret);
|
||||
goto err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
clk_disable_unprepare(priv->pclk);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int g12a_mdio_mux_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct g12a_mdio_mux *priv = platform_get_drvdata(pdev);
|
||||
|
||||
mdio_mux_uninit(priv->mux_handle);
|
||||
|
||||
if (priv->pll_is_enabled)
|
||||
clk_disable_unprepare(priv->pll);
|
||||
|
||||
clk_disable_unprepare(priv->pclk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver g12a_mdio_mux_driver = {
|
||||
.probe = g12a_mdio_mux_probe,
|
||||
.remove = g12a_mdio_mux_remove,
|
||||
.driver = {
|
||||
.name = "g12a-mdio_mux",
|
||||
.of_match_table = g12a_mdio_mux_match,
|
||||
},
|
||||
};
|
||||
module_platform_driver(g12a_mdio_mux_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver");
|
||||
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user