mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-27 07:20:52 +07:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL
uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
parent
fe2639892c
commit
6d7d7b3ecd
@ -33,6 +33,23 @@
|
||||
#include "clock.h"
|
||||
#include "fuse.h"
|
||||
|
||||
/*
|
||||
* Storage for debug-macro.S's state.
|
||||
*
|
||||
* This must be in .data not .bss so that it gets initialized each time the
|
||||
* kernel is loaded. The data is declared here rather than debug-macro.S so
|
||||
* that multiple inclusions of debug-macro.S point at the same data.
|
||||
*/
|
||||
#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF)
|
||||
u32 tegra_uart_config[3] = {
|
||||
/* Debug UART initialization required */
|
||||
1,
|
||||
/* Debug UART physical address */
|
||||
(u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET),
|
||||
/* Debug UART virtual address */
|
||||
(u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET),
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id tegra_dt_irq_match[] __initconst = {
|
||||
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
|
||||
|
@ -1,11 +1,17 @@
|
||||
/*
|
||||
* arch/arm/mach-tegra/include/mach/debug-macro.S
|
||||
*
|
||||
* Copyright (C) 2010 Google, Inc.
|
||||
* Copyright (C) 2010,2011 Google, Inc.
|
||||
* Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
|
||||
*
|
||||
* Author:
|
||||
* Colin Cross <ccross@google.com>
|
||||
* Erik Gilling <konkers@google.com>
|
||||
* Doug Anderson <dianders@chromium.org>
|
||||
* Stephen Warren <swarren@nvidia.com>
|
||||
*
|
||||
* Portions based on mach-omap2's debug-macro.S
|
||||
* Copyright (C) 1994-1999 Russell King
|
||||
*
|
||||
* This software is licensed under the terms of the GNU General Public
|
||||
* License version 2, as published by the Free Software Foundation, and
|
||||
@ -18,18 +24,78 @@
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/serial_reg.h>
|
||||
|
||||
#include <mach/io.h>
|
||||
#include <mach/iomap.h>
|
||||
#include <mach/irammap.h>
|
||||
|
||||
.macro addruart, rp, rv, tmp
|
||||
ldr \rp, =IO_APB_PHYS @ physical
|
||||
ldr \rv, =IO_APB_VIRT @ virtual
|
||||
orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
|
||||
orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
|
||||
orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF)
|
||||
orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
|
||||
.endm
|
||||
.macro addruart, rp, rv, tmp
|
||||
adr \rp, 99f @ actual addr of 99f
|
||||
ldr \rv, [\rp] @ linked addr is stored there
|
||||
sub \rv, \rv, \rp @ offset between the two
|
||||
ldr \rp, [\rp, #4] @ linked tegra_uart_config
|
||||
sub \tmp, \rp, \rv @ actual tegra_uart_config
|
||||
ldr \rp, [\tmp] @ Load tegra_uart_config
|
||||
cmp \rp, #1 @ needs intitialization?
|
||||
bne 100f @ no; go load the addresses
|
||||
mov \rv, #0 @ yes; record init is done
|
||||
str \rv, [\tmp]
|
||||
mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM
|
||||
ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
|
||||
movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
|
||||
movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
|
||||
cmp \rv, \rp @ Cookie present?
|
||||
bne 100f @ No, use default UART
|
||||
mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM
|
||||
ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
|
||||
str \rv, [\tmp, #4] @ Store in tegra_uart_phys
|
||||
sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address
|
||||
add \rv, \rv, #IO_APB_VIRT
|
||||
str \rv, [\tmp, #8] @ Store in tegra_uart_virt
|
||||
b 100f
|
||||
|
||||
#define UART_SHIFT 2
|
||||
#include <asm/hardware/debug-8250.S>
|
||||
.align
|
||||
99: .word .
|
||||
.word tegra_uart_config
|
||||
.ltorg
|
||||
|
||||
100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
|
||||
ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
|
||||
.endm
|
||||
|
||||
#define UART_SHIFT 2
|
||||
|
||||
/*
|
||||
* Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
|
||||
* check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
|
||||
* We use the fact that all 5 valid UART addresses all have something in the
|
||||
* 2nd-to-lowest byte.
|
||||
*/
|
||||
|
||||
.macro senduart, rd, rx
|
||||
tst \rx, #0x0000ff00
|
||||
strneb \rd, [\rx, #UART_TX << UART_SHIFT]
|
||||
1001:
|
||||
.endm
|
||||
|
||||
.macro busyuart, rd, rx
|
||||
tst \rx, #0x0000ff00
|
||||
beq 1002f
|
||||
1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
|
||||
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
|
||||
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
|
||||
bne 1001b
|
||||
1002:
|
||||
.endm
|
||||
|
||||
.macro waituart, rd, rx
|
||||
#ifdef FLOW_CONTROL
|
||||
tst \rx, #0x0000ff00
|
||||
beq 1002f
|
||||
1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
|
||||
tst \rd, #UART_MSR_CTS
|
||||
beq 1001b
|
||||
1002:
|
||||
#endif
|
||||
.endm
|
||||
|
35
arch/arm/mach-tegra/include/mach/irammap.h
Normal file
35
arch/arm/mach-tegra/include/mach/irammap.h
Normal file
@ -0,0 +1,35 @@
|
||||
/*
|
||||
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef __MACH_TEGRA_IRAMMAP_H
|
||||
#define __MACH_TEGRA_IRAMMAP_H
|
||||
|
||||
#include <asm/sizes.h>
|
||||
|
||||
/* The first 1K of IRAM is permanently reserved for the CPU reset handler */
|
||||
#define TEGRA_IRAM_RESET_HANDLER_OFFSET 0
|
||||
#define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K
|
||||
|
||||
/*
|
||||
* These locations are written to by uncompress.h, and read by debug-macro.S.
|
||||
* The first word holds the cookie value if the data is valid. The second
|
||||
* word holds the UART physical address.
|
||||
*/
|
||||
#define TEGRA_IRAM_DEBUG_UART_OFFSET SZ_1K
|
||||
#define TEGRA_IRAM_DEBUG_UART_SIZE 8
|
||||
#define TEGRA_IRAM_DEBUG_UART_COOKIE 0x55415254
|
||||
|
||||
#endif
|
@ -3,7 +3,7 @@
|
||||
*
|
||||
* Copyright (C) 2010 Google, Inc.
|
||||
* Copyright (C) 2011 Google, Inc.
|
||||
* Copyright (C) 2011 NVIDIA CORPORATION. All Rights Reserved.
|
||||
* Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
|
||||
*
|
||||
* Author:
|
||||
* Colin Cross <ccross@google.com>
|
||||
@ -30,6 +30,7 @@
|
||||
#include <linux/serial_reg.h>
|
||||
|
||||
#include <mach/iomap.h>
|
||||
#include <mach/irammap.h>
|
||||
|
||||
#define DEBUG_UART_SHIFT 2
|
||||
|
||||
@ -49,6 +50,17 @@ static inline void flush(void)
|
||||
{
|
||||
}
|
||||
|
||||
static inline void save_uart_address(void)
|
||||
{
|
||||
u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
|
||||
|
||||
if (uart) {
|
||||
buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
|
||||
buf[1] = (u32)uart;
|
||||
} else
|
||||
buf[0] = 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup before decompression. This is where we do UART selection for
|
||||
* earlyprintk and init the uart_base register.
|
||||
@ -125,6 +137,7 @@ static inline void arch_decomp_setup(void)
|
||||
}
|
||||
if (i == ARRAY_SIZE(uarts))
|
||||
uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
|
||||
save_uart_address();
|
||||
if (uart == NULL)
|
||||
return;
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user