net: hns3: Add support to reset the enet/ring mgmt layer

After VF driver knows that hardware reset has been performed
successfully, it should proceed ahead and reset the enet layer.
This primarily consists of bringing down interface, clearing
TX/RX rings, disassociating vectors from ring etc.

Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c

@@ -2,6 +2,7 @@
 // Copyright (c) 2016-2017 Hisilicon Limited.
 
 #include <linux/etherdevice.h>
+#include <net/rtnetlink.h>
 #include "hclgevf_cmd.h"
 #include "hclgevf_main.h"
 #include "hclge_mbx.h"
@@ -832,6 +833,101 @@ static void hclgevf_reset_tqp(struct hnae3_handle *handle, u16 queue_id)
 			     2, true, NULL, 0);
 }
 
+static int hclgevf_notify_client(struct hclgevf_dev *hdev,
+				 enum hnae3_reset_notify_type type)
+{
+	struct hnae3_client *client = hdev->nic_client;
+	struct hnae3_handle *handle = &hdev->nic;
+
+	if (!client->ops->reset_notify)
+		return -EOPNOTSUPP;
+
+	return client->ops->reset_notify(handle, type);
+}
+
+static int hclgevf_reset_wait(struct hclgevf_dev *hdev)
+{
+#define HCLGEVF_RESET_WAIT_MS	500
+#define HCLGEVF_RESET_WAIT_CNT	20
+	u32 val, cnt = 0;
+
+	/* wait to check the hardware reset completion status */
+	val = hclgevf_read_dev(&hdev->hw, HCLGEVF_FUN_RST_ING);
+	while (hnae_get_bit(val, HCLGEVF_FUN_RST_ING_B) &&
+			    (cnt < HCLGEVF_RESET_WAIT_CNT)) {
+		msleep(HCLGEVF_RESET_WAIT_MS);
+		val = hclgevf_read_dev(&hdev->hw, HCLGEVF_FUN_RST_ING);
+		cnt++;
+	}
+
+	/* hardware completion status should be available by this time */
+	if (cnt >= HCLGEVF_RESET_WAIT_CNT) {
+		dev_warn(&hdev->pdev->dev,
+			 "could'nt get reset done status from h/w, timeout!\n");
+		return -EBUSY;
+	}
+
+	/* we will wait a bit more to let reset of the stack to complete. This
+	 * might happen in case reset assertion was made by PF. Yes, this also
+	 * means we might end up waiting bit more even for VF reset.
+	 */
+	msleep(5000);
+
+	return 0;
+}
+
+static int hclgevf_reset_stack(struct hclgevf_dev *hdev)
+{
+	/* uninitialize the nic client */
+	hclgevf_notify_client(hdev, HNAE3_UNINIT_CLIENT);
+
+	/* re-initialize the hclge device - add code here */
+
+	/* bring up the nic client again */
+	hclgevf_notify_client(hdev, HNAE3_INIT_CLIENT);
+
+	return 0;
+}
+
+static int hclgevf_reset(struct hclgevf_dev *hdev)
+{
+	int ret;
+
+	rtnl_lock();
+
+	/* bring down the nic to stop any ongoing TX/RX */
+	hclgevf_notify_client(hdev, HNAE3_DOWN_CLIENT);
+
+	/* check if VF could successfully fetch the hardware reset completion
+	 * status from the hardware
+	 */
+	ret = hclgevf_reset_wait(hdev);
+	if (ret) {
+		/* can't do much in this situation, will disable VF */
+		dev_err(&hdev->pdev->dev,
+			"VF failed(=%d) to fetch H/W reset completion status\n",
+			ret);
+
+		dev_warn(&hdev->pdev->dev, "VF reset failed, disabling VF!\n");
+		hclgevf_notify_client(hdev, HNAE3_UNINIT_CLIENT);
+
+		rtnl_unlock();
+		return ret;
+	}
+
+	/* now, re-initialize the nic client and ae device*/
+	ret = hclgevf_reset_stack(hdev);
+	if (ret)
+		dev_err(&hdev->pdev->dev, "failed to reset VF stack\n");
+
+	/* bring up the nic to enable TX/RX again */
+	hclgevf_notify_client(hdev, HNAE3_UP_CLIENT);
+
+	rtnl_unlock();
+
+	return ret;
+}
+
 static int hclgevf_do_reset(struct hclgevf_dev *hdev)
 {
 	int status;
@@ -940,10 +1036,9 @@ static void hclgevf_reset_service_task(struct work_struct *work)
 		 */
 		hdev->reset_attempts = 0;
 
-		/* code to check/wait for hardware reset completion and the
-		 * further initiating software stack reset would be added here
-		 */
-
+		ret = hclgevf_reset(hdev);
+		if (ret)
+			dev_err(&hdev->pdev->dev, "VF stack reset failed.\n");
 	} else if (test_and_clear_bit(HCLGEVF_RESET_REQUESTED,
 				      &hdev->reset_state)) {
 		/* we could be here when either of below happens:

drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h

@@ -34,6 +34,9 @@
 #define HCLGEVF_VECTOR0_RX_CMDQ_INT_B	1
 
 #define HCLGEVF_TQP_RESET_TRY_TIMES	10
+/* Reset related Registers */
+#define HCLGEVF_FUN_RST_ING		0x20C00
+#define HCLGEVF_FUN_RST_ING_B		0
 
 #define HCLGEVF_RSS_IND_TBL_SIZE		512
 #define HCLGEVF_RSS_SET_BITMAP_MSK	0xffff