staging: comedi: plx9080.h: rename some macros for consistency

Most of the macros in "plx9080.h" that define register values are
single-bits flags of the form `PLX_<REG>_<FLAG>`, or are constant,
multi-bit values of the form `PLX_<REG>_<FIELD>_<VAL>`, or are
non-constant, function-like macros of the form `PLX_<REG>_<FIELD>(x)`.
Some of the macros for constant, multi-bit values do not currently
fit the pattern, so rename them for consistency.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ian Abbott 2016-06-20 14:05:49 +01:00 committed by Greg Kroah-Hartman
parent 6ad124d53a
commit 686869b451
3 changed files with 26 additions and 26 deletions

View File

@ -1327,9 +1327,9 @@ static void init_plx9080(struct comedi_device *dev)
bits |= PLX_DMAMODE_BURSTEN;
/* 4020 uses 32 bit dma */
if (board->layout == LAYOUT_4020)
bits |= PLX_DMAMODE_WIDTH32;
bits |= PLX_DMAMODE_WIDTH_32;
else /* localspace0 bus is 16 bits wide */
bits |= PLX_DMAMODE_WIDTH16;
bits |= PLX_DMAMODE_WIDTH_16;
writel(bits, plx_iobase + PLX_REG_DMAMODE1);
if (ao_cmd_is_supported(board))
writel(bits, plx_iobase + PLX_REG_DMAMODE0);

View File

@ -582,7 +582,7 @@ static void gsc_hpdi_init_plx9080(struct comedi_device *dev)
bits |= PLX_DMAMODE_DEMAND;
/* enable local burst mode */
bits |= PLX_DMAMODE_BURSTEN;
bits |= PLX_DMAMODE_WIDTH32;
bits |= PLX_DMAMODE_WIDTH_32;
writel(bits, plx_iobase + PLX_REG_DMAMODE0);
}

View File

@ -60,9 +60,9 @@ struct plx_dma_desc {
#define PLX_REG_LAS1RR 0x00f0
#define PLX_LASRR_IO BIT(0) /* Map to: 1=I/O, 0=Mem */
#define PLX_LASRR_ANY32 (BIT(1) * 0) /* Locate anywhere in 32 bit */
#define PLX_LASRR_LT1MB (BIT(1) * 1) /* Locate in 1st meg */
#define PLX_LASRR_ANY64 (BIT(1) * 2) /* Locate anywhere in 64 bit */
#define PLX_LASRR_MLOC_ANY32 (BIT(1) * 0) /* Locate anywhere in 32 bit */
#define PLX_LASRR_MLOC_LT1MB (BIT(1) * 1) /* Locate in 1st meg */
#define PLX_LASRR_MLOC_ANY64 (BIT(1) * 2) /* Locate anywhere in 64 bit */
#define PLX_LASRR_MLOC_MASK GENMASK(2, 1) /* Memory location bits */
#define PLX_LASRR_PREFETCH BIT(3) /* Memory is prefetchable */
/* bits that specify range for memory space decode bits */
@ -166,10 +166,10 @@ struct plx_dma_desc {
#define PLX_REG_LBRD1 0x00f8
/* Memory Space Local Bus Width */
#define PLX_LBRD_MSWIDTH8 (BIT(0) * 0) /* 8 bits wide */
#define PLX_LBRD_MSWIDTH16 (BIT(0) * 1) /* 16 bits wide */
#define PLX_LBRD_MSWIDTH32 (BIT(0) * 2) /* 32 bits wide */
#define PLX_LBRD_MSWIDTH32A (BIT(0) * 3) /* 32 bits wide */
#define PLX_LBRD_MSWIDTH_8 (BIT(0) * 0) /* 8 bits wide */
#define PLX_LBRD_MSWIDTH_16 (BIT(0) * 1) /* 16 bits wide */
#define PLX_LBRD_MSWIDTH_32 (BIT(0) * 2) /* 32 bits wide */
#define PLX_LBRD_MSWIDTH_32A (BIT(0) * 3) /* 32 bits wide */
#define PLX_LBRD_MSWIDTH_MASK GENMASK(1, 0)
/* Memory Space Internal Wait States */
#define PLX_LBRD_MSIWS(x) (BIT(2) * ((x) & 0xf))
@ -194,10 +194,10 @@ struct plx_dma_desc {
#define PLX_LBRD_PFCOUNT_MASK GENMASK(14, 11)
#define PLX_LBRD_TO_PFCOUNT(r) (((r) & PLX_LBRD_PFCOUNT_MASK) >> 11)
/* Expansion ROM Space Local Bus Width (LBRD0 only) */
#define PLX_LBRD0_EROMWIDTH8 (BIT(16) * 0) /* 8 bits wide */
#define PLX_LBRD0_EROMWIDTH16 (BIT(16) * 1) /* 16 bits wide */
#define PLX_LBRD0_EROMWIDTH32 (BIT(16) * 2) /* 32 bits wide */
#define PLX_LBRD0_EROMWIDTH32A (BIT(16) * 3) /* 32 bits wide */
#define PLX_LBRD0_EROMWIDTH_8 (BIT(16) * 0) /* 8 bits wide */
#define PLX_LBRD0_EROMWIDTH_16 (BIT(16) * 1) /* 16 bits wide */
#define PLX_LBRD0_EROMWIDTH_32 (BIT(16) * 2) /* 32 bits wide */
#define PLX_LBRD0_EROMWIDTH_32A (BIT(16) * 3) /* 32 bits wide */
#define PLX_LBRD0_EROMWIDTH_MASK GENMASK(17, 16)
/* Expansion ROM Space Internal Wait States (LBRD0 only) */
#define PLX_LBRD0_EROMIWS(x) (BIT(18) * ((x) & 0xf))
@ -239,10 +239,10 @@ struct plx_dma_desc {
/* LLOCK# Input Enable */
#define PLX_DMPBAM_LLOCKIEN BIT(2)
/* Direct Master Read Prefetch Size Control (bits 12, 3) */
#define PLX_DMPBAM_RPSIZECONT ((BIT(12) * 0) | (BIT(3) * 0))
#define PLX_DMPBAM_RPSIZE4 ((BIT(12) * 0) | (BIT(3) * 1))
#define PLX_DMPBAM_RPSIZE8 ((BIT(12) * 1) | (BIT(3) * 0))
#define PLX_DMPBAM_RPSIZE16 ((BIT(12) * 1) | (BIT(3) * 1))
#define PLX_DMPBAM_RPSIZE_CONT ((BIT(12) * 0) | (BIT(3) * 0))
#define PLX_DMPBAM_RPSIZE_4 ((BIT(12) * 0) | (BIT(3) * 1))
#define PLX_DMPBAM_RPSIZE_8 ((BIT(12) * 1) | (BIT(3) * 0))
#define PLX_DMPBAM_RPSIZE_16 ((BIT(12) * 1) | (BIT(3) * 1))
#define PLX_DMPBAM_RPSIZE_MASK (BIT(12) | BIT(3))
/* Direct Master PCI Read Mode - deassert IRDY when FIFO full */
#define PLX_DMPBAM_RMIRDY BIT(4)
@ -259,10 +259,10 @@ struct plx_dma_desc {
/* I/O Remap Select */
#define PLX_DMPBAM_IOREMAPSEL BIT(13)
/* Direct Master Write Delay */
#define PLX_DMPBAM_WDELAYNONE (BIT(14) * 0)
#define PLX_DMPBAM_WDELAY4 (BIT(14) * 1)
#define PLX_DMPBAM_WDELAY8 (BIT(14) * 2)
#define PLX_DMPBAM_WDELAY16 (BIT(14) * 3)
#define PLX_DMPBAM_WDELAY_NONE (BIT(14) * 0)
#define PLX_DMPBAM_WDELAY_4 (BIT(14) * 1)
#define PLX_DMPBAM_WDELAY_8 (BIT(14) * 2)
#define PLX_DMPBAM_WDELAY_16 (BIT(14) * 3)
#define PLX_DMPBAM_WDELAY_MASK GENMASK(15, 14)
/* Remap of Local-to-PCI Space Into PCI Address Space */
#define PLX_DMPBAM_REMAP_MASK GENMASK(31, 16)
@ -462,10 +462,10 @@ struct plx_dma_desc {
#define PLX_REG_DMAMODE1 0x0094
/* Local Bus Width */
#define PLX_DMAMODE_WIDTH8 (BIT(0) * 0) /* 8 bits wide */
#define PLX_DMAMODE_WIDTH16 (BIT(0) * 1) /* 16 bits wide */
#define PLX_DMAMODE_WIDTH32 (BIT(0) * 2) /* 32 bits wide */
#define PLX_DMAMODE_WIDTH32A (BIT(0) * 3) /* 32 bits wide */
#define PLX_DMAMODE_WIDTH_8 (BIT(0) * 0) /* 8 bits wide */
#define PLX_DMAMODE_WIDTH_16 (BIT(0) * 1) /* 16 bits wide */
#define PLX_DMAMODE_WIDTH_32 (BIT(0) * 2) /* 32 bits wide */
#define PLX_DMAMODE_WIDTH_32A (BIT(0) * 3) /* 32 bits wide */
#define PLX_DMAMODE_WIDTH_MASK GENMASK(1, 0)
/* Internal Wait States */
#define PLX_DMAMODE_IWS(x) (BIT(2) * ((x) & 0xf))