AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 02:55:11 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

iio: gyro: adxrs290: Add triggered buffer support

Browse Source 
Provide a way for continuous data capture by setting up buffer support. The
data ready signal exposed at the SYNC pin of the ADXRS290 is exploited as
a hardware interrupt which triggers to fill the buffer.

Triggered buffer setup was tested with both hardware trigger (DATA_RDY) and
software triggers (sysfs-trig & hrtimer).

Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200910180450.29696-2-nish.malpani25@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Nishant Malpani 2020-09-10 23:34:48 +05:30 committed by Jonathan Cameron
parent 5ac65da27e
commit 672555807f
2 changed files with 199 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/iio/gyro/Kconfig
View File

@ -44,6 +44,8 @@ config ADIS16260
config ADXRS290
tristate "Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope SPI driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices ADXRS290 programmable
digital output gyroscope.

211
drivers/iio/gyro/adxrs290.c
View File

@ -13,8 +13,12 @@
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#define ADXRS290_ADI_ID 0xAD
#define ADXRS290_MEMS_ID 0x1D
@ -35,7 +39,9 @@
#define ADXRS290_READ BIT(7)
#define ADXRS290_TSM BIT(0)
#define ADXRS290_MEASUREMENT BIT(1)
#define ADXRS290_SYNC GENMASK(1, 0)
#define ADXRS290_DATA_RDY_OUT BIT(0)
#define ADXRS290_SYNC_MASK GENMASK(1, 0)
#define ADXRS290_SYNC(x) FIELD_PREP(ADXRS290_SYNC_MASK, x)
#define ADXRS290_LPF_MASK GENMASK(2, 0)
#define ADXRS290_LPF(x) FIELD_PREP(ADXRS290_LPF_MASK, x)
#define ADXRS290_HPF_MASK GENMASK(7, 4)
@ -50,6 +56,13 @@ enum adxrs290_mode {
ADXRS290_MODE_MEASUREMENT,
};
enum adxrs290_scan_index {
ADXRS290_IDX_X,
ADXRS290_IDX_Y,
ADXRS290_IDX_TEMP,
ADXRS290_IDX_TS,
};
struct adxrs290_state {
struct spi_device *spi;
/* Serialize reads and their subsequent processing */
@ -57,6 +70,12 @@ struct adxrs290_state {
enum adxrs290_mode mode;
unsigned int lpf_3db_freq_idx;
unsigned int hpf_3db_freq_idx;
struct iio_trigger *dready_trig;
/* Ensure correct alignment of timestamp when present */
struct {
s16 channels[3];
s64 ts __aligned(8);
} buffer;
};
/*
@ -270,24 +289,34 @@ static int adxrs290_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
switch (chan->type) {
case IIO_ANGL_VEL:
ret = adxrs290_get_rate_data(indio_dev,
ADXRS290_READ_REG(chan->address),
val);
if (ret < 0)
return ret;
break;
return IIO_VAL_INT;
ret = IIO_VAL_INT;
break;
case IIO_TEMP:
ret = adxrs290_get_temp_data(indio_dev, val);
if (ret < 0)
return ret;
break;
return IIO_VAL_INT;
ret = IIO_VAL_INT;
break;
default:
return -EINVAL;
ret = -EINVAL;
break;
}
iio_device_release_direct_mode(indio_dev);
return ret;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_ANGL_VEL:
@ -334,34 +363,52 @@ static int adxrs290_write_raw(struct iio_dev *indio_dev,
long mask)
{
struct adxrs290_state *st = iio_priv(indio_dev);
int lpf_idx, hpf_idx;
int ret, lpf_idx, hpf_idx;
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
switch (mask) {
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
lpf_idx = adxrs290_find_match(adxrs290_lpf_3db_freq_hz_table,
ARRAY_SIZE(adxrs290_lpf_3db_freq_hz_table),
val, val2);
if (lpf_idx < 0)
return -EINVAL;
if (lpf_idx < 0) {
ret = -EINVAL;
break;
}
/* caching the updated state of the low-pass filter */
st->lpf_3db_freq_idx = lpf_idx;
/* retrieving the current state of the high-pass filter */
hpf_idx = st->hpf_3db_freq_idx;
return adxrs290_set_filter_freq(indio_dev, lpf_idx, hpf_idx);
ret = adxrs290_set_filter_freq(indio_dev, lpf_idx, hpf_idx);
break;
case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
hpf_idx = adxrs290_find_match(adxrs290_hpf_3db_freq_hz_table,
ARRAY_SIZE(adxrs290_hpf_3db_freq_hz_table),
val, val2);
if (hpf_idx < 0)
return -EINVAL;
if (hpf_idx < 0) {
ret = -EINVAL;
break;
}
/* caching the updated state of the high-pass filter */
st->hpf_3db_freq_idx = hpf_idx;
/* retrieving the current state of the low-pass filter */
lpf_idx = st->lpf_3db_freq_idx;
return adxrs290_set_filter_freq(indio_dev, lpf_idx, hpf_idx);
ret = adxrs290_set_filter_freq(indio_dev, lpf_idx, hpf_idx);
break;
default:
ret = -EINVAL;
break;
}
return -EINVAL;
iio_device_release_direct_mode(indio_dev);
return ret;
}
static int adxrs290_read_avail(struct iio_dev *indio_dev,
@ -389,6 +436,72 @@ static int adxrs290_read_avail(struct iio_dev *indio_dev,
}
}
static int adxrs290_data_rdy_trigger_set_state(struct iio_trigger *trig,
bool state)
{
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
struct adxrs290_state *st = iio_priv(indio_dev);
int ret;
u8 val;
val = state ? ADXRS290_SYNC(ADXRS290_DATA_RDY_OUT) : 0;
ret = adxrs290_spi_write_reg(st->spi, ADXRS290_REG_DATA_RDY, val);
if (ret < 0)
dev_err(&st->spi->dev, "failed to start data rdy interrupt\n");
return ret;
}
static int adxrs290_reset_trig(struct iio_trigger *trig)
{
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
int val;
/*
* Data ready interrupt is reset after a read of the data registers.
* Here, we only read the 16b DATAY registers as that marks the end of
* a read of the data registers and initiates a reset for the interrupt
* line.
*/
adxrs290_get_rate_data(indio_dev,
ADXRS290_READ_REG(ADXRS290_REG_DATAY0), &val);
return 0;
}
static const struct iio_trigger_ops adxrs290_trigger_ops = {
.set_trigger_state = &adxrs290_data_rdy_trigger_set_state,
.validate_device = &iio_trigger_validate_own_device,
.try_reenable = &adxrs290_reset_trig,
};
static irqreturn_t adxrs290_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct adxrs290_state *st = iio_priv(indio_dev);
u8 tx = ADXRS290_READ_REG(ADXRS290_REG_DATAX0);
int ret;
mutex_lock(&st->lock);
/* exercise a bulk data capture starting from reg DATAX0... */
ret = spi_write_then_read(st->spi, &tx, sizeof(tx), st->buffer.channels,
sizeof(st->buffer.channels));
if (ret < 0)
goto out_unlock_notify;
iio_push_to_buffers_with_timestamp(indio_dev, &st->buffer,
pf->timestamp);
out_unlock_notify:
mutex_unlock(&st->lock);
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
#define ADXRS290_ANGL_VEL_CHANNEL(reg, axis) { \
.type = IIO_ANGL_VEL, \
.address = reg, \
@ -401,6 +514,13 @@ static int adxrs290_read_avail(struct iio_dev *indio_dev,
.info_mask_shared_by_type_available = \
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \
.scan_index = ADXRS290_IDX_##axis, \
.scan_type = { \
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_LE, \
}, \
}
static const struct iio_chan_spec adxrs290_channels[] = {
@ -411,7 +531,20 @@ static const struct iio_chan_spec adxrs290_channels[] = {
.address = ADXRS290_REG_TEMP0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
.scan_index = ADXRS290_IDX_TEMP,
.scan_type = {
.sign = 's',
.realbits = 12,
.storagebits = 16,
.endianness = IIO_LE,
},
},
IIO_CHAN_SOFT_TIMESTAMP(ADXRS290_IDX_TS),
};
static const unsigned long adxrs290_avail_scan_masks[] = {
BIT(ADXRS290_IDX_X) | BIT(ADXRS290_IDX_Y) | BIT(ADXRS290_IDX_TEMP),
0
};
static const struct iio_info adxrs290_info = {
@ -420,6 +553,44 @@ static const struct iio_info adxrs290_info = {
.read_avail = &adxrs290_read_avail,
};
static int adxrs290_probe_trigger(struct iio_dev *indio_dev)
{
struct adxrs290_state *st = iio_priv(indio_dev);
int ret;
if (!st->spi->irq) {
dev_info(&st->spi->dev, "no irq, using polling\n");
return 0;
}
st->dready_trig = devm_iio_trigger_alloc(&st->spi->dev, "%s-dev%d",
indio_dev->name,
indio_dev->id);
if (!st->dready_trig)
return -ENOMEM;
st->dready_trig->dev.parent = &st->spi->dev;
st->dready_trig->ops = &adxrs290_trigger_ops;
iio_trigger_set_drvdata(st->dready_trig, indio_dev);
ret = devm_request_irq(&st->spi->dev, st->spi->irq,
&iio_trigger_generic_data_rdy_poll,
IRQF_ONESHOT, "adxrs290_irq", st->dready_trig);
if (ret < 0)
return dev_err_probe(&st->spi->dev, ret,
"request irq %d failed\n", st->spi->irq);
ret = devm_iio_trigger_register(&st->spi->dev, st->dready_trig);
if (ret) {
dev_err(&st->spi->dev, "iio trigger register failed\n");
return ret;
}
indio_dev->trig = iio_trigger_get(st->dready_trig);
return 0;
}
static int adxrs290_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
@ -439,6 +610,7 @@ static int adxrs290_probe(struct spi_device *spi)
indio_dev->channels = adxrs290_channels;
indio_dev->num_channels = ARRAY_SIZE(adxrs290_channels);
indio_dev->info = &adxrs290_info;
indio_dev->available_scan_masks = adxrs290_avail_scan_masks;
mutex_init(&st->lock);
@ -478,6 +650,17 @@ static int adxrs290_probe(struct spi_device *spi)
st->lpf_3db_freq_idx = val;
st->hpf_3db_freq_idx = val2;
ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
&iio_pollfunc_store_time,
&adxrs290_trigger_handler, NULL);
if (ret < 0)
return dev_err_probe(&spi->dev, ret,
"iio triggered buffer setup failed\n");
ret = adxrs290_probe_trigger(indio_dev);
if (ret < 0)
return ret;
return devm_iio_device_register(&spi->dev, indio_dev);
}