[ALSA] hda-codec - Add support of HP Thin Client T5735

Added the support of HP Thin Client T5735 [0x103c 0x302f] with ALC262 codec.

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit is contained in:
Kailang Yang 2007-11-14 12:06:21 +01:00 committed by Jaroslav Kysela
parent 83a28a09c8
commit 66d2a9d659

View File

@ -92,6 +92,7 @@ enum {
ALC262_HP_BPC,
ALC262_HP_BPC_D7000_WL,
ALC262_HP_BPC_D7000_WF,
ALC262_HP_TC_T5735,
ALC262_BENQ_ED8,
ALC262_SONY_ASSAMD,
ALC262_BENQ_T31,
@ -7710,6 +7711,81 @@ static struct snd_kcontrol_new alc262_HP_BPC_WildWest_option_mixer[] = {
{ } /* end */
};
static struct hda_bind_ctls alc262_hp_t5735_bind_front_vol = {
.ops = &snd_hda_bind_vol,
.values = {
HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT),
HDA_COMPOSE_AMP_VAL(0x0d, 3, 0, HDA_OUTPUT),
0
},
};
static struct hda_bind_ctls alc262_hp_t5735_bind_front_sw = {
.ops = &snd_hda_bind_sw,
.values = {
HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
HDA_COMPOSE_AMP_VAL(0x15, 3, 0, HDA_OUTPUT),
0
},
};
/* mute/unmute internal speaker according to the hp jack and mute state */
static void alc262_hp_t5735_automute(struct hda_codec *codec, int force)
{
struct alc_spec *spec = codec->spec;
unsigned int mute;
if (force || !spec->sense_updated) {
unsigned int present;
present = snd_hda_codec_read(codec, 0x15, 0,
AC_VERB_GET_PIN_SENSE, 0);
spec->jack_present = (present & 0x80000000) != 0;
spec->sense_updated = 1;
}
if (spec->jack_present)
mute = (0x7080 | ((0)<<8)); /* mute internal speaker */
else /* unmute internal speaker if necessary */
mute = (0x7000 | ((0)<<8));
snd_hda_codec_write(codec, 0x0c, 0,
AC_VERB_SET_AMP_GAIN_MUTE, mute );
}
static void alc262_hp_t5735_unsol_event(struct hda_codec *codec,
unsigned int res)
{
if ((res >> 26) != ALC880_HP_EVENT)
return;
alc262_hp_t5735_automute(codec, 1);
}
static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
{
alc262_hp_t5735_automute(codec, 1);
}
static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
HDA_BIND_VOL("PCM Playback Volume", &alc262_hp_t5735_bind_front_vol),
HDA_BIND_SW("PCM Playback Switch",&alc262_hp_t5735_bind_front_sw),
HDA_CODEC_VOLUME("LineOut Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("LineOut Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("iSpeaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
{ } /* end */
};
static struct hda_verb alc262_hp_t5735_verbs[] = {
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
{ }
};
/* bind hp and internal speaker mute (with plug check) */
static int alc262_sony_master_sw_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@ -8579,6 +8655,8 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x2803, "HP D7000", ALC262_HP_BPC_D7000_WF),
SND_PCI_QUIRK(0x103c, 0x2805, "HP D7000", ALC262_HP_BPC_D7000_WF),
SND_PCI_QUIRK(0x103c, 0x2807, "HP D7000", ALC262_HP_BPC_D7000_WF),
SND_PCI_QUIRK(0x103c, 0x302f, "HP Thin Client T5735",
ALC262_HP_TC_T5735),
SND_PCI_QUIRK(0x104d, 0x8203, "Sony UX-90", ALC262_HIPPO),
SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU),
SND_PCI_QUIRK(0x17ff, 0x058f, "Benq Hippo", ALC262_HIPPO_1),
@ -8673,6 +8751,18 @@ static struct alc_config_preset alc262_presets[] = {
.channel_mode = alc262_modes,
.input_mux = &alc262_HP_D7000_capture_source,
},
[ALC262_HP_TC_T5735] = {
.mixers = { alc262_hp_t5735_mixer },
.init_verbs = { alc262_init_verbs, alc262_hp_t5735_verbs },
.num_dacs = ARRAY_SIZE(alc262_dac_nids),
.dac_nids = alc262_dac_nids,
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hp_t5735_unsol_event,
.init_hook = alc262_hp_t5735_init_hook,
},
[ALC262_BENQ_ED8] = {
.mixers = { alc262_base_mixer },
.init_verbs = { alc262_init_verbs, alc262_EAPD_verbs },