mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 13:30:57 +07:00
ARM: dts: rockchip: bump sd card pin drive strength up on rk3288-evb
It seems that ever since (536f6b9
mmc: dw_mmc: Reset DMA before enabling IDMAC) landed upstream that SD cards have been very unhappy on rk3288-evb. They were a little unhappy before that change, but after that change they're REALLY unhappy. It turns out that the above fix happens to fix a corruption when reading card information during probe time. Without the fix we didn't detect that high speed SD cards could actually support high speed. With the fix we suddenly detect that they're high speed and we try to use them at 50MHz. That doesn't work so well on EVB with the default drive strength (maybe because there are two physical SD card slots hooked up to the same pin?). Fix the problem by bumping up the drive strength of the sdmmc lines. Signed-off-by: Doug Anderson <dianders@chromium.org> Fixes:536f6b91d2
("mmc: dw_mmc: Reset DMA before enabling IDMAC") Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
parent
97bf6af1f9
commit
6618e47895
@ -155,6 +155,15 @@ &tsadc {
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
|
||||
drive-strength = <8>;
|
||||
};
|
||||
|
||||
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
||||
bias-pull-up;
|
||||
drive-strength = <8>;
|
||||
};
|
||||
|
||||
backlight {
|
||||
bl_en: bl-en {
|
||||
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
@ -173,6 +182,27 @@ pmic_int: pmic-int {
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
/*
|
||||
* Default drive strength isn't enough to achieve even
|
||||
* high-speed mode on EVB board so bump up to 8ma.
|
||||
*/
|
||||
sdmmc_bus4: sdmmc-bus4 {
|
||||
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_clk: sdmmc-clk {
|
||||
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_cmd: sdmmc-cmd {
|
||||
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
|
Loading…
Reference in New Issue
Block a user