AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-30 01:06:41 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

mmc: Convert pr_warning to pr_warn

Browse Source 
Use the much more common pr_warn instead of pr_warning.

Other miscellanea:

o Coalesce formats
o Realign arguments
o Remove extra spaces when coalescing formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Joe Perches 2014-09-12 14:56:56 -07:00 committed by Ulf Hansson
parent 48d11e067f
commit 6606110d89
14 changed files with 69 additions and 92 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/mmc/card/block.c
View File

@ -1928,8 +1928,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
case MMC_BLK_ECC_ERR:
if (brq->data.blocks > 1) {
/* Redo read one sector at a time */
pr_warning("%s: retrying using single block read\n",
req->rq_disk->disk_name);
pr_warn("%s: retrying using single block read\n",
req->rq_disk->disk_name);
disable_multi = 1;
break;
}

6
drivers/mmc/card/queue.c
View File

@ -229,14 +229,12 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
if (bouncesz > 512) {
mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_cur->bounce_buf) {
pr_warning("%s: unable to "
"allocate bounce cur buffer\n",
pr_warn("%s: unable to allocate bounce cur buffer\n",
mmc_card_name(card));
}
mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_prev->bounce_buf) {
pr_warning("%s: unable to "
"allocate bounce prev buffer\n",
pr_warn("%s: unable to allocate bounce prev buffer\n",
mmc_card_name(card));
kfree(mqrq_cur->bounce_buf);
mqrq_cur->bounce_buf = NULL;

9
drivers/mmc/card/sdio_uart.c
View File

@ -1063,8 +1063,8 @@ static int sdio_uart_probe(struct sdio_func *func,
return -ENOMEM;
if (func->class == SDIO_CLASS_UART) {
pr_warning("%s: need info on UART class basic setup\n",
sdio_func_id(func));
pr_warn("%s: need info on UART class basic setup\n",
sdio_func_id(func));
kfree(port);
return -ENOSYS;
} else if (func->class == SDIO_CLASS_GPS) {
@ -1082,9 +1082,8 @@ static int sdio_uart_probe(struct sdio_func *func,
break;
}
if (!tpl) {
pr_warning(
"%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
sdio_func_id(func));
pr_warn("%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
sdio_func_id(func));
kfree(port);
return -EINVAL;
}

8
drivers/mmc/core/core.c
View File

@ -433,8 +433,8 @@ static void mmc_wait_for_req_done(struct mmc_host *host,
*/
if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) {
if (!mmc_interrupt_hpi(host->card)) {
pr_warning("%s: %s: Interrupted sanitize\n",
mmc_hostname(host), __func__);
pr_warn("%s: %s: Interrupted sanitize\n",
mmc_hostname(host), __func__);
cmd->error = 0;
break;
} else {
@ -1417,8 +1417,8 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
if (!host->ops->start_signal_voltage_switch)
return -EPERM;
if (!host->ops->card_busy)
pr_warning("%s: cannot verify signal voltage switch\n",
mmc_hostname(host));
pr_warn("%s: cannot verify signal voltage switch\n",
mmc_hostname(host));
cmd.opcode = SD_SWITCH_VOLTAGE;
cmd.arg = 0;

17
drivers/mmc/core/mmc.c
View File

@ -226,9 +226,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
"Card will be ignored.\n",
mmc_hostname(card->host));
} else {
pr_warning("%s: unable to read "
"EXT_CSD, performance might "
"suffer.\n",
pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
mmc_hostname(card->host));
err = 0;
}
@ -816,8 +814,8 @@ static int __mmc_select_powerclass(struct mmc_card *card,
ext_csd->raw_pwr_cl_200_360;
break;
default:
pr_warning("%s: Voltage range not supported "
"for power class.\n", mmc_hostname(host));
pr_warn("%s: Voltage range not supported for power class\n",
mmc_hostname(host));
return -EINVAL;
}
@ -1490,8 +1488,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if (err && err != -EBADMSG)
goto free_card;
if (err) {
pr_warning("%s: Enabling HPI failed\n",
mmc_hostname(card->host));
pr_warn("%s: Enabling HPI failed\n",
mmc_hostname(card->host));
err = 0;
} else
card->ext_csd.hpi_en = 1;
@ -1512,9 +1510,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
* Only if no error, cache is turned on successfully.
*/
if (err) {
pr_warning("%s: Cache is supported, "
"but failed to turn on (%d)\n",
mmc_hostname(card->host), err);
pr_warn("%s: Cache is supported, but failed to turn on (%d)\n",
mmc_hostname(card->host), err);
card->ext_csd.cache_ctrl = 0;
err = 0;
} else {

4
drivers/mmc/core/mmc_ops.c
View File

@ -649,8 +649,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
int err;
if (!card->ext_csd.hpi) {
pr_warning("%s: Card didn't support HPI command\n",
mmc_hostname(card->host));
pr_warn("%s: Card didn't support HPI command\n",
mmc_hostname(card->host));
return -EINVAL;
}

33
drivers/mmc/core/sd.c
View File

@ -229,8 +229,8 @@ static int mmc_read_ssr(struct mmc_card *card)
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
pr_warning("%s: card lacks mandatory SD Status "
"function.\n", mmc_hostname(card->host));
pr_warn("%s: card lacks mandatory SD Status function\n",
mmc_hostname(card->host));
return 0;
}
@ -240,8 +240,8 @@ static int mmc_read_ssr(struct mmc_card *card)
err = mmc_app_sd_status(card, ssr);
if (err) {
pr_warning("%s: problem reading SD Status "
"register.\n", mmc_hostname(card->host));
pr_warn("%s: problem reading SD Status register\n",
mmc_hostname(card->host));
err = 0;
goto out;
}
@ -265,8 +265,8 @@ static int mmc_read_ssr(struct mmc_card *card)
card->ssr.erase_offset = eo * 1000;
}
} else {
pr_warning("%s: SD Status: Invalid Allocation Unit size.\n",
mmc_hostname(card->host));
pr_warn("%s: SD Status: Invalid Allocation Unit size\n",
mmc_hostname(card->host));
}
}
out:
@ -286,8 +286,7 @@ static int mmc_read_switch(struct mmc_card *card)
return 0;
if (!(card->csd.cmdclass & CCC_SWITCH)) {
pr_warning("%s: card lacks mandatory switch "
"function, performance might suffer.\n",
pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
mmc_hostname(card->host));
return 0;
}
@ -316,7 +315,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
pr_warning("%s: problem reading Bus Speed modes.\n",
pr_warn("%s: problem reading Bus Speed modes\n",
mmc_hostname(card->host));
err = 0;
@ -372,8 +371,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
goto out;
if ((status[16] & 0xF) != 1) {
pr_warning("%s: Problem switching card "
"into high-speed mode!\n",
pr_warn("%s: Problem switching card into high-speed mode!\n",
mmc_hostname(card->host));
err = 0;
} else {
@ -440,7 +438,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
return err;
if ((status[15] & 0xF) != drive_strength) {
pr_warning("%s: Problem setting drive strength!\n",
pr_warn("%s: Problem setting drive strength!\n",
mmc_hostname(card->host));
return 0;
}
@ -518,7 +516,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
return err;
if ((status[16] & 0xF) != card->sd_bus_speed)
pr_warning("%s: Problem setting bus speed mode!\n",
pr_warn("%s: Problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
mmc_set_timing(card->host, timing);
@ -598,7 +596,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
return err;
if (((status[15] >> 4) & 0x0F) != current_limit)
pr_warning("%s: Problem setting current limit!\n",
pr_warn("%s: Problem setting current limit!\n",
mmc_hostname(card->host));
}
@ -727,8 +725,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
try_again:
if (!retries) {
ocr &= ~SD_OCR_S18R;
pr_warning("%s: Skipping voltage switch\n",
mmc_hostname(host));
pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));
}
/*
@ -872,9 +869,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
}
if (ro < 0) {
pr_warning("%s: host does not "
"support reading read-only "
"switch. assuming write-enable.\n",
pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n",
mmc_hostname(host));
} else if (ro > 0) {
mmc_card_set_readonly(card);

7
drivers/mmc/core/sdio.c
View File

@ -216,8 +216,8 @@ static int sdio_enable_wide(struct mmc_card *card)
return ret;
if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
mmc_hostname(card->host), ctrl);
pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
mmc_hostname(card->host), ctrl);
/* set as 4-bit bus width */
ctrl &= ~SDIO_BUS_WIDTH_MASK;
@ -605,8 +605,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
try_again:
if (!retries) {
pr_warning("%s: Skipping voltage switch\n",
mmc_hostname(host));
pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));
ocr &= ~R4_18V_PRESENT;
}

4
drivers/mmc/core/sdio_bus.c
View File

@ -177,8 +177,8 @@ static int sdio_bus_remove(struct device *dev)
drv->remove(func);
if (func->irq_handler) {
pr_warning("WARNING: driver %s did not remove "
"its interrupt handler!\n", drv->name);
pr_warn("WARNING: driver %s did not remove its interrupt handler!\n",
drv->name);
sdio_claim_host(func);
sdio_release_irq(func);
sdio_release_host(func);

7
drivers/mmc/core/sdio_irq.c
View File

@ -69,16 +69,15 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
if (pending & (1 << i)) {
func = card->sdio_func[i - 1];
if (!func) {
pr_warning("%s: pending IRQ for "
"non-existent function\n",
pr_warn("%s: pending IRQ for non-existent function\n",
mmc_card_id(card));
ret = -EINVAL;
} else if (func->irq_handler) {
func->irq_handler(func);
count++;
} else {
pr_warning("%s: pending IRQ with no handler\n",
sdio_func_id(func));
pr_warn("%s: pending IRQ with no handler\n",
sdio_func_id(func));
ret = -EINVAL;
}
}

3
drivers/mmc/host/s3cmci.c
View File

@ -985,7 +985,8 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
* one block being transferred. */
if (data->blocks > 1) {
pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
__func__, data->blksz);
return -EINVAL;
}
}

34
drivers/mmc/host/sdhci.c
View File

@ -1754,8 +1754,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
3600000);
if (ret) {
pr_warning("%s: Switching to 3.3V signalling voltage "
" failed\n", mmc_hostname(mmc));
pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
mmc_hostname(mmc));
return -EIO;
}
}
@ -1767,8 +1767,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
if (!(ctrl & SDHCI_CTRL_VDD_180))
return 0;
pr_warning("%s: 3.3V regulator output did not became stable\n",
mmc_hostname(mmc));
pr_warn("%s: 3.3V regulator output did not became stable\n",
mmc_hostname(mmc));
return -EAGAIN;
case MMC_SIGNAL_VOLTAGE_180:
@ -1776,8 +1776,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
ret = regulator_set_voltage(mmc->supply.vqmmc,
1700000, 1950000);
if (ret) {
pr_warning("%s: Switching to 1.8V signalling voltage "
" failed\n", mmc_hostname(mmc));
pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
mmc_hostname(mmc));
return -EIO;
}
}
@ -1794,8 +1794,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
if (ctrl & SDHCI_CTRL_VDD_180)
return 0;
pr_warning("%s: 1.8V regulator output did not became stable\n",
mmc_hostname(mmc));
pr_warn("%s: 1.8V regulator output did not became stable\n",
mmc_hostname(mmc));
return -EAGAIN;
case MMC_SIGNAL_VOLTAGE_120:
@ -1803,8 +1803,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
1300000);
if (ret) {
pr_warning("%s: Switching to 1.2V signalling voltage "
" failed\n", mmc_hostname(mmc));
pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
mmc_hostname(mmc));
return -EIO;
}
}
@ -2844,8 +2844,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
pr_warning("%s: No suitable DMA "
"available. Falling back to PIO.\n",
pr_warn("%s: No suitable DMA available - falling back to PIO\n",
mmc_hostname(mmc));
host->flags &=
~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
@ -2867,15 +2866,14 @@ int sdhci_add_host(struct sdhci_host *host)
dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
host->adma_desc, host->adma_addr);
kfree(host->align_buffer);
pr_warning("%s: Unable to allocate ADMA "
"buffers. Falling back to standard DMA.\n",
pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
host->adma_desc = NULL;
host->align_buffer = NULL;
} else if (host->adma_addr & 3) {
pr_warning("%s: unable to allocate aligned ADMA descriptor\n",
mmc_hostname(mmc));
pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
host->adma_desc, host->adma_addr);
@ -3202,8 +3200,8 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
SDHCI_MAX_BLOCK_SHIFT;
if (mmc->max_blk_size >= 3) {
pr_warning("%s: Invalid maximum block size, "
"assuming 512 bytes\n", mmc_hostname(mmc));
pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
mmc_hostname(mmc));
mmc->max_blk_size = 0;
}
}

4
drivers/mmc/host/tifm_sd.c
View File

@ -952,8 +952,8 @@ static int tifm_sd_probe(struct tifm_dev *sock)
if (!(TIFM_SOCK_STATE_OCCUPIED
& readl(sock->addr + SOCK_PRESENT_STATE))) {
pr_warning("%s : card gone, unexpectedly\n",
dev_name(&sock->dev));
pr_warn("%s : card gone, unexpectedly\n",
dev_name(&sock->dev));
return rc;
}

21
drivers/mmc/host/wbsd.c
View File

@ -803,8 +803,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
default:
#ifdef CONFIG_MMC_DEBUG
pr_warning("%s: Data command %d is not "
"supported by this controller.\n",
pr_warn("%s: Data command %d is not supported by this controller\n",
mmc_hostname(host->mmc), cmd->opcode);
#endif
cmd->error = -EINVAL;
@ -1429,8 +1428,8 @@ static void wbsd_request_dma(struct wbsd_host *host, int dma)
free_dma(dma);
err:
pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. "
"Falling back on FIFO.\n", dma);
pr_warn(DRIVER_NAME ": Unable to allocate DMA %d - falling back on FIFO\n",
dma);
}
static void wbsd_release_dma(struct wbsd_host *host)
@ -1664,9 +1663,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
ret = wbsd_scan(host);
if (ret) {
if (pnp && (ret == -ENODEV)) {
pr_warning(DRIVER_NAME
": Unable to confirm device presence. You may "
"experience lock-ups.\n");
pr_warn(DRIVER_NAME ": Unable to confirm device presence - you may experience lock-ups\n");
} else {
wbsd_free_mmc(dev);
return ret;
@ -1688,10 +1685,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
*/
if (pnp) {
if ((host->config != 0) && !wbsd_chip_validate(host)) {
pr_warning(DRIVER_NAME
": PnP active but chip not configured! "
"You probably have a buggy BIOS. "
"Configuring chip manually.\n");
pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
wbsd_chip_config(host);
}
} else
@ -1884,10 +1878,7 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev)
*/
if (host->config != 0) {
if (!wbsd_chip_validate(host)) {
pr_warning(DRIVER_NAME
": PnP active but chip not configured! "
"You probably have a buggy BIOS. "
"Configuring chip manually.\n");
pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
wbsd_chip_config(host);
}
}