net-next: mediatek: add support for MT7623 ethernet

Add ethernet support for MediaTek SoCs from the MT7623 family. These have
dual GMAC. Depending on the exact version, there might be a built-in
Gigabit switch (MT7530). The core does not have the typical DMA ring setup.
Instead there is a linked list that we add descriptors to. There is only
one linked list that both MACs use together. There is a special field
inside the TX descriptors called the VQID. This allows us to assign packets
to different internal queues. By using a separate id for each MAC we are
able to get deterministic results for BQL. Additionally we need to
provide the core with a block of scratch memory that is the same size as
the RX ring and data buffer. This is really needed to make the HW datapath
work. Although the driver does not support this yet, we still need to
assign the memory and tell the core about it for RX to work.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
John Crispin 2016-03-08 11:29:55 +01:00 committed by David S. Miller
parent 58ff9865b7
commit 656e705243
2 changed files with 2228 additions and 0 deletions

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,421 @@
/* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2009-2016 John Crispin <blogic@openwrt.org>
* Copyright (C) 2009-2016 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2013-2016 Michael Lee <igvtee@gmail.com>
*/
#ifndef MTK_ETH_H
#define MTK_ETH_H
#define MTK_QDMA_PAGE_SIZE 2048
#define MTK_MAX_RX_LENGTH 1536
#define MTK_TX_DMA_BUF_LEN 0x3fff
#define MTK_DMA_SIZE 256
#define MTK_NAPI_WEIGHT 64
#define MTK_MAC_COUNT 2
#define MTK_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
#define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
#define MTK_DMA_DUMMY_DESC 0xffffffff
#define MTK_DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | \
NETIF_MSG_PROBE | \
NETIF_MSG_LINK | \
NETIF_MSG_TIMER | \
NETIF_MSG_IFDOWN | \
NETIF_MSG_IFUP | \
NETIF_MSG_RX_ERR | \
NETIF_MSG_TX_ERR)
#define MTK_HW_FEATURES (NETIF_F_IP_CSUM | \
NETIF_F_RXCSUM | \
NETIF_F_HW_VLAN_CTAG_TX | \
NETIF_F_HW_VLAN_CTAG_RX | \
NETIF_F_SG | NETIF_F_TSO | \
NETIF_F_TSO6 | \
NETIF_F_IPV6_CSUM)
#define NEXT_RX_DESP_IDX(X) (((X) + 1) & (MTK_DMA_SIZE - 1))
/* Frame Engine Global Reset Register */
#define MTK_RST_GL 0x04
#define RST_GL_PSE BIT(0)
/* Frame Engine Interrupt Status Register */
#define MTK_INT_STATUS2 0x08
#define MTK_GDM1_AF BIT(28)
#define MTK_GDM2_AF BIT(29)
/* Frame Engine Interrupt Grouping Register */
#define MTK_FE_INT_GRP 0x20
/* CDMP Exgress Control Register */
#define MTK_CDMP_EG_CTRL 0x404
/* GDM Exgress Control Register */
#define MTK_GDMA_FWD_CFG(x) (0x500 + (x * 0x1000))
#define MTK_GDMA_ICS_EN BIT(22)
#define MTK_GDMA_TCS_EN BIT(21)
#define MTK_GDMA_UCS_EN BIT(20)
/* Unicast Filter MAC Address Register - Low */
#define MTK_GDMA_MAC_ADRL(x) (0x508 + (x * 0x1000))
/* Unicast Filter MAC Address Register - High */
#define MTK_GDMA_MAC_ADRH(x) (0x50C + (x * 0x1000))
/* QDMA TX Queue Configuration Registers */
#define MTK_QTX_CFG(x) (0x1800 + (x * 0x10))
#define QDMA_RES_THRES 4
/* QDMA TX Queue Scheduler Registers */
#define MTK_QTX_SCH(x) (0x1804 + (x * 0x10))
/* QDMA RX Base Pointer Register */
#define MTK_QRX_BASE_PTR0 0x1900
/* QDMA RX Maximum Count Register */
#define MTK_QRX_MAX_CNT0 0x1904
/* QDMA RX CPU Pointer Register */
#define MTK_QRX_CRX_IDX0 0x1908
/* QDMA RX DMA Pointer Register */
#define MTK_QRX_DRX_IDX0 0x190C
/* QDMA Global Configuration Register */
#define MTK_QDMA_GLO_CFG 0x1A04
#define MTK_RX_2B_OFFSET BIT(31)
#define MTK_RX_BT_32DWORDS (3 << 11)
#define MTK_TX_WB_DDONE BIT(6)
#define MTK_DMA_SIZE_16DWORDS (2 << 4)
#define MTK_RX_DMA_BUSY BIT(3)
#define MTK_TX_DMA_BUSY BIT(1)
#define MTK_RX_DMA_EN BIT(2)
#define MTK_TX_DMA_EN BIT(0)
#define MTK_DMA_BUSY_TIMEOUT HZ
/* QDMA Reset Index Register */
#define MTK_QDMA_RST_IDX 0x1A08
#define MTK_PST_DRX_IDX0 BIT(16)
/* QDMA Delay Interrupt Register */
#define MTK_QDMA_DELAY_INT 0x1A0C
/* QDMA Flow Control Register */
#define MTK_QDMA_FC_THRES 0x1A10
#define FC_THRES_DROP_MODE BIT(20)
#define FC_THRES_DROP_EN (7 << 16)
#define FC_THRES_MIN 0x4444
/* QDMA Interrupt Status Register */
#define MTK_QMTK_INT_STATUS 0x1A18
#define MTK_RX_DONE_INT1 BIT(17)
#define MTK_RX_DONE_INT0 BIT(16)
#define MTK_TX_DONE_INT3 BIT(3)
#define MTK_TX_DONE_INT2 BIT(2)
#define MTK_TX_DONE_INT1 BIT(1)
#define MTK_TX_DONE_INT0 BIT(0)
#define MTK_RX_DONE_INT (MTK_RX_DONE_INT0 | MTK_RX_DONE_INT1)
#define MTK_TX_DONE_INT (MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \
MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3)
/* QDMA Interrupt Status Register */
#define MTK_QDMA_INT_MASK 0x1A1C
/* QDMA Interrupt Mask Register */
#define MTK_QDMA_HRED2 0x1A44
/* QDMA TX Forward CPU Pointer Register */
#define MTK_QTX_CTX_PTR 0x1B00
/* QDMA TX Forward DMA Pointer Register */
#define MTK_QTX_DTX_PTR 0x1B04
/* QDMA TX Release CPU Pointer Register */
#define MTK_QTX_CRX_PTR 0x1B10
/* QDMA TX Release DMA Pointer Register */
#define MTK_QTX_DRX_PTR 0x1B14
/* QDMA FQ Head Pointer Register */
#define MTK_QDMA_FQ_HEAD 0x1B20
/* QDMA FQ Head Pointer Register */
#define MTK_QDMA_FQ_TAIL 0x1B24
/* QDMA FQ Free Page Counter Register */
#define MTK_QDMA_FQ_CNT 0x1B28
/* QDMA FQ Free Page Buffer Length Register */
#define MTK_QDMA_FQ_BLEN 0x1B2C
/* GMA1 Received Good Byte Count Register */
#define MTK_GDM1_TX_GBCNT 0x2400
#define MTK_STAT_OFFSET 0x40
/* QDMA descriptor txd4 */
#define TX_DMA_CHKSUM (0x7 << 29)
#define TX_DMA_TSO BIT(28)
#define TX_DMA_FPORT_SHIFT 25
#define TX_DMA_FPORT_MASK 0x7
#define TX_DMA_INS_VLAN BIT(16)
/* QDMA descriptor txd3 */
#define TX_DMA_OWNER_CPU BIT(31)
#define TX_DMA_LS0 BIT(30)
#define TX_DMA_PLEN0(_x) (((_x) & MTK_TX_DMA_BUF_LEN) << 16)
#define TX_DMA_SWC BIT(14)
#define TX_DMA_SDL(_x) (((_x) & 0x3fff) << 16)
/* QDMA descriptor rxd2 */
#define RX_DMA_DONE BIT(31)
#define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
#define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff)
/* QDMA descriptor rxd3 */
#define RX_DMA_VID(_x) ((_x) & 0xfff)
/* QDMA descriptor rxd4 */
#define RX_DMA_L4_VALID BIT(24)
#define RX_DMA_FPORT_SHIFT 19
#define RX_DMA_FPORT_MASK 0x7
/* PHY Indirect Access Control registers */
#define MTK_PHY_IAC 0x10004
#define PHY_IAC_ACCESS BIT(31)
#define PHY_IAC_READ BIT(19)
#define PHY_IAC_WRITE BIT(18)
#define PHY_IAC_START BIT(16)
#define PHY_IAC_ADDR_SHIFT 20
#define PHY_IAC_REG_SHIFT 25
#define PHY_IAC_TIMEOUT HZ
/* Mac control registers */
#define MTK_MAC_MCR(x) (0x10100 + (x * 0x100))
#define MAC_MCR_MAX_RX_1536 BIT(24)
#define MAC_MCR_IPG_CFG (BIT(18) | BIT(16))
#define MAC_MCR_FORCE_MODE BIT(15)
#define MAC_MCR_TX_EN BIT(14)
#define MAC_MCR_RX_EN BIT(13)
#define MAC_MCR_BACKOFF_EN BIT(9)
#define MAC_MCR_BACKPR_EN BIT(8)
#define MAC_MCR_FORCE_RX_FC BIT(5)
#define MAC_MCR_FORCE_TX_FC BIT(4)
#define MAC_MCR_SPEED_1000 BIT(3)
#define MAC_MCR_SPEED_100 BIT(2)
#define MAC_MCR_FORCE_DPX BIT(1)
#define MAC_MCR_FORCE_LINK BIT(0)
#define MAC_MCR_FIXED_LINK (MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | \
MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN | \
MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN | \
MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_RX_FC | \
MAC_MCR_FORCE_TX_FC | MAC_MCR_SPEED_1000 | \
MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_LINK)
/* GPIO port control registers for GMAC 2*/
#define GPIO_OD33_CTRL8 0x4c0
#define GPIO_BIAS_CTRL 0xed0
#define GPIO_DRV_SEL10 0xf00
/* ethernet subsystem config register */
#define ETHSYS_SYSCFG0 0x14
#define SYSCFG0_GE_MASK 0x3
#define SYSCFG0_GE_MODE(x, y) (x << (12 + (y * 2)))
struct mtk_rx_dma {
unsigned int rxd1;
unsigned int rxd2;
unsigned int rxd3;
unsigned int rxd4;
} __packed __aligned(4);
struct mtk_tx_dma {
unsigned int txd1;
unsigned int txd2;
unsigned int txd3;
unsigned int txd4;
} __packed __aligned(4);
struct mtk_eth;
struct mtk_mac;
/* struct mtk_hw_stats - the structure that holds the traffic statistics.
* @stats_lock: make sure that stats operations are atomic
* @reg_offset: the status register offset of the SoC
* @syncp: the refcount
*
* All of the supported SoCs have hardware counters for traffic statistics.
* Whenever the status IRQ triggers we can read the latest stats from these
* counters and store them in this struct.
*/
struct mtk_hw_stats {
u64 tx_bytes;
u64 tx_packets;
u64 tx_skip;
u64 tx_collisions;
u64 rx_bytes;
u64 rx_packets;
u64 rx_overflow;
u64 rx_fcs_errors;
u64 rx_short_errors;
u64 rx_long_errors;
u64 rx_checksum_errors;
u64 rx_flow_control_packets;
spinlock_t stats_lock;
u32 reg_offset;
struct u64_stats_sync syncp;
};
/* PDMA descriptor can point at 1-2 segments. This enum allows us to track how
* memory was allocated so that it can be freed properly
*/
enum mtk_tx_flags {
MTK_TX_FLAGS_SINGLE0 = 0x01,
MTK_TX_FLAGS_PAGE0 = 0x02,
};
/* struct mtk_tx_buf - This struct holds the pointers to the memory pointed at
* by the TX descriptor s
* @skb: The SKB pointer of the packet being sent
* @dma_addr0: The base addr of the first segment
* @dma_len0: The length of the first segment
* @dma_addr1: The base addr of the second segment
* @dma_len1: The length of the second segment
*/
struct mtk_tx_buf {
struct sk_buff *skb;
u32 flags;
DEFINE_DMA_UNMAP_ADDR(dma_addr0);
DEFINE_DMA_UNMAP_LEN(dma_len0);
DEFINE_DMA_UNMAP_ADDR(dma_addr1);
DEFINE_DMA_UNMAP_LEN(dma_len1);
};
/* struct mtk_tx_ring - This struct holds info describing a TX ring
* @dma: The descriptor ring
* @buf: The memory pointed at by the ring
* @phys: The physical addr of tx_buf
* @next_free: Pointer to the next free descriptor
* @last_free: Pointer to the last free descriptor
* @thresh: The threshold of minimum amount of free descriptors
* @free_count: QDMA uses a linked list. Track how many free descriptors
* are present
*/
struct mtk_tx_ring {
struct mtk_tx_dma *dma;
struct mtk_tx_buf *buf;
dma_addr_t phys;
struct mtk_tx_dma *next_free;
struct mtk_tx_dma *last_free;
u16 thresh;
atomic_t free_count;
};
/* struct mtk_rx_ring - This struct holds info describing a RX ring
* @dma: The descriptor ring
* @data: The memory pointed at by the ring
* @phys: The physical addr of rx_buf
* @frag_size: How big can each fragment be
* @buf_size: The size of each packet buffer
* @calc_idx: The current head of ring
*/
struct mtk_rx_ring {
struct mtk_rx_dma *dma;
u8 **data;
dma_addr_t phys;
u16 frag_size;
u16 buf_size;
u16 calc_idx;
};
/* currently no SoC has more than 2 macs */
#define MTK_MAX_DEVS 2
/* struct mtk_eth - This is the main datasructure for holding the state
* of the driver
* @dev: The device pointer
* @base: The mapped register i/o base
* @page_lock: Make sure that register operations are atomic
* @dummy_dev: we run 2 netdevs on 1 physical DMA ring and need a
* dummy for NAPI to work
* @netdev: The netdev instances
* @mac: Each netdev is linked to a physical MAC
* @irq: The IRQ that we are using
* @msg_enable: Ethtool msg level
* @ethsys: The register map pointing at the range used to setup
* MII modes
* @pctl: The register map pointing at the range used to setup
* GMAC port drive/slew values
* @dma_refcnt: track how many netdevs are using the DMA engine
* @tx_ring: Pointer to the memore holding info about the TX ring
* @rx_ring: Pointer to the memore holding info about the RX ring
* @rx_napi: The NAPI struct
* @scratch_ring: Newer SoCs need memory for a second HW managed TX ring
* @scratch_head: The scratch memory that scratch_ring points to.
* @clk_ethif: The ethif clock
* @clk_esw: The switch clock
* @clk_gp1: The gmac1 clock
* @clk_gp2: The gmac2 clock
* @mii_bus: If there is a bus we need to create an instance for it
*/
struct mtk_eth {
struct device *dev;
void __iomem *base;
struct reset_control *rstc;
spinlock_t page_lock;
struct net_device dummy_dev;
struct net_device *netdev[MTK_MAX_DEVS];
struct mtk_mac *mac[MTK_MAX_DEVS];
int irq;
u32 msg_enable;
unsigned long sysclk;
struct regmap *ethsys;
struct regmap *pctl;
atomic_t dma_refcnt;
struct mtk_tx_ring tx_ring;
struct mtk_rx_ring rx_ring;
struct napi_struct rx_napi;
struct mtk_tx_dma *scratch_ring;
void *scratch_head;
struct clk *clk_ethif;
struct clk *clk_esw;
struct clk *clk_gp1;
struct clk *clk_gp2;
struct mii_bus *mii_bus;
};
/* struct mtk_mac - the structure that holds the info about the MACs of the
* SoC
* @id: The number of the MAC
* @of_node: Our devicetree node
* @hw: Backpointer to our main datastruture
* @hw_stats: Packet statistics counter
* @phy_dev: The attached PHY if available
* @pending_work: The workqueue used to reset the dma ring
*/
struct mtk_mac {
int id;
struct device_node *of_node;
struct mtk_eth *hw;
struct mtk_hw_stats *hw_stats;
struct phy_device *phy_dev;
struct work_struct pending_work;
};
/* the struct describing the SoC. these are declared in the soc_xyz.c files */
extern const struct of_device_id of_mtk_match[];
/* read the hardware status register */
void mtk_stats_update_mac(struct mtk_mac *mac);
void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg);
u32 mtk_r32(struct mtk_eth *eth, unsigned reg);
#endif /* MTK_ETH_H */