Merge branch 'master' into upstream-fixes

arch/powerpc/Kconfig

@@ -526,12 +526,15 @@ config PPC_IBM_CELL_BLADE
 	select UDBG_RTAS_CONSOLE
 
 config PPC_PS3
-	bool "Sony PS3"
+	bool "Sony PS3 (incomplete)"
 	depends on PPC_MULTIPLATFORM && PPC64
 	select PPC_CELL
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.
+	  Support for this platform is not yet complete, so
+	  enabling this will not result in a bootable kernel on a
+	  PS3 system.
 
 config PPC_NATIVE
 	bool

arch/powerpc/kernel/pci_64.c

@@ -1430,7 +1430,7 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus,
 
 	for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
 		bus = pci_bus_b(ln);
-		if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate))
+		if (in_bus >= bus->number && in_bus <= bus->subordinate)
 			break;
 		bus = NULL;
 	}

arch/powerpc/platforms/ps3/Makefile

@@ -1,4 +1,5 @@
-obj-y += setup.o mm.o smp.o time.o hvcall.o htab.o repository.o
+obj-y += setup.o mm.o time.o hvcall.o htab.o repository.o
 obj-y += interrupt.o exports.o os-area.o
 
+obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_SPU_BASE) += spu.o

arch/powerpc/platforms/ps3/interrupt.c

@@ -71,7 +71,7 @@ int ps3_free_io_irq(unsigned int virq)
 
 	result = lv1_destruct_io_irq_outlet(virq_to_hw(virq));
 
-	if (!result)
+	if (result)
 		pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 

block/scsi_ioctl.c

@@ -223,7 +223,7 @@ static int verify_command(struct file *file, unsigned char *cmd)
 static int sg_io(struct file *file, request_queue_t *q,
 		struct gendisk *bd_disk, struct sg_io_hdr *hdr)
 {
-	unsigned long start_time;
+	unsigned long start_time, timeout;
 	int writing = 0, ret = 0;
 	struct request *rq;
 	char sense[SCSI_SENSE_BUFFERSIZE];
@@ -271,7 +271,8 @@ static int sg_io(struct file *file, request_queue_t *q,
 
 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 
-	rq->timeout = jiffies_to_msecs(hdr->timeout);
+	timeout = msecs_to_jiffies(hdr->timeout);
+	rq->timeout = (timeout < INT_MAX) ? timeout : INT_MAX;
 	if (!rq->timeout)
 		rq->timeout = q->sg_timeout;
 	if (!rq->timeout)

drivers/net/sky2.c

@@ -3639,29 +3639,6 @@ static int sky2_resume(struct pci_dev *pdev)
 out:
 	return err;
 }
-
-/* BIOS resume runs after device (it's a bug in PM)
- * as a temporary workaround on suspend/resume leave MSI disabled
- */
-static int sky2_suspend_late(struct pci_dev *pdev, pm_message_t state)
-{
-	struct sky2_hw *hw = pci_get_drvdata(pdev);
-
-	free_irq(pdev->irq, hw);
-	if (hw->msi) {
-		pci_disable_msi(pdev);
-		hw->msi = 0;
-	}
-	return 0;
-}
-
-static int sky2_resume_early(struct pci_dev *pdev)
-{
-	struct sky2_hw *hw = pci_get_drvdata(pdev);
-	struct net_device *dev = hw->dev[0];
-
-	return request_irq(pdev->irq, sky2_intr, IRQF_SHARED, dev->name, hw);
-}
 #endif
 
 static struct pci_driver sky2_driver = {
@@ -3672,8 +3649,6 @@ static struct pci_driver sky2_driver = {
 #ifdef CONFIG_PM
 	.suspend = sky2_suspend,
 	.resume = sky2_resume,
-	.suspend_late = sky2_suspend_late,
-	.resume_early = sky2_resume_early,
 #endif
 };
 

fs/buffer.c

@@ -2844,7 +2844,6 @@ int try_to_free_buffers(struct page *page)
 
 	spin_lock(&mapping->private_lock);
 	ret = drop_buffers(page, &buffers_to_free);
-	spin_unlock(&mapping->private_lock);
 
 	/*
 	 * If the filesystem writes its buffers by hand (eg ext3)
@@ -2855,9 +2854,14 @@ int try_to_free_buffers(struct page *page)
 	 * Also, during truncate, discard_buffer will have marked all
 	 * the page's buffers clean.  We discover that here and clean
 	 * the page also.
+	 *
+	 * private_lock must be held over this entire operation in order
+	 * to synchronise against __set_page_dirty_buffers and prevent the
+	 * dirty bit from being lost.
 	 */
 	if (ret)
 		cancel_dirty_page(page, PAGE_CACHE_SIZE);
+	spin_unlock(&mapping->private_lock);
 out:
 	if (buffers_to_free) {
 		struct buffer_head *bh = buffers_to_free;

mm/page-writeback.c

@@ -133,11 +133,9 @@ get_dirty_limits(long *pbackground, long *pdirty,
 
 #ifdef CONFIG_HIGHMEM
 	/*
-	 * If this mapping can only allocate from low memory,
+	 * We always exclude high memory from our count.
-	 * we exclude high memory from our count.
 	 */
-	if (mapping && !(mapping_gfp_mask(mapping) & __GFP_HIGHMEM))
+	available_memory -= totalhigh_pages;
-		available_memory -= totalhigh_pages;
 #endif
 
 
@@ -526,28 +524,25 @@ static struct notifier_block __cpuinitdata ratelimit_nb = {
 };
 
 /*
- * If the machine has a large highmem:lowmem ratio then scale back the default
+ * Called early on to tune the page writeback dirty limits.
- * dirty memory thresholds: allowing too much dirty highmem pins an excessive
+ *
- * number of buffer_heads.
+ * We used to scale dirty pages according to how total memory
+ * related to pages that could be allocated for buffers (by
+ * comparing nr_free_buffer_pages() to vm_total_pages.
+ *
+ * However, that was when we used "dirty_ratio" to scale with
+ * all memory, and we don't do that any more. "dirty_ratio"
+ * is now applied to total non-HIGHPAGE memory (by subtracting
+ * totalhigh_pages from vm_total_pages), and as such we can't
+ * get into the old insane situation any more where we had
+ * large amounts of dirty pages compared to a small amount of
+ * non-HIGHMEM memory.
+ *
+ * But we might still want to scale the dirty_ratio by how
+ * much memory the box has..
  */
 void __init page_writeback_init(void)
 {
-	long buffer_pages = nr_free_buffer_pages();
-	long correction;
-
-	correction = (100 * 4 * buffer_pages) / vm_total_pages;
-
-	if (correction < 100) {
-		dirty_background_ratio *= correction;
-		dirty_background_ratio /= 100;
-		vm_dirty_ratio *= correction;
-		vm_dirty_ratio /= 100;
-
-		if (dirty_background_ratio <= 0)
-			dirty_background_ratio = 1;
-		if (vm_dirty_ratio <= 0)
-			vm_dirty_ratio = 1;
-	}
 	mod_timer(&wb_timer, jiffies + dirty_writeback_interval);
 	writeback_set_ratelimit();
 	register_cpu_notifier(&ratelimit_nb);