From 5e66e35aab335b83d9ffb220d8a3a13986a7a60e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 31 Jan 2019 14:31:48 -0500 Subject: [PATCH] bnxt_en: Disable interrupts when allocating CP rings or NQs. When calling firmware to allocate a CP ring or NQ, an interrupt associated with that ring may be generated immediately before the doorbell is even setup after the firmware call returns. When servicing the interrupt, the driver may crash when trying to access the doorbell. Fix it by disabling interrupt on that vector until the doorbell is set up. Fixes: 697197e5a173 ("bnxt_en: Re-structure doorbells.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 6a512871176b..8bc7e495b027 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4973,12 +4973,18 @@ static int bnxt_hwrm_ring_alloc(struct bnxt *bp) struct bnxt_cp_ring_info *cpr = &bnapi->cp_ring; struct bnxt_ring_struct *ring = &cpr->cp_ring_struct; u32 map_idx = ring->map_idx; + unsigned int vector; + vector = bp->irq_tbl[map_idx].vector; + disable_irq_nosync(vector); rc = hwrm_ring_alloc_send_msg(bp, ring, type, map_idx); - if (rc) + if (rc) { + enable_irq(vector); goto err_out; + } bnxt_set_db(bp, &cpr->cp_db, type, map_idx, ring->fw_ring_id); bnxt_db_nq(bp, &cpr->cp_db, cpr->cp_raw_cons); + enable_irq(vector); bp->grp_info[i].cp_fw_ring_id = ring->fw_ring_id; if (!i) {