Merge branch 'doc/4.9' into docs-next

Documentation/Makefile.sphinx

@@ -29,7 +29,7 @@ else ifneq ($(DOCBOOKS),)
 else # HAVE_SPHINX
 
 # User-friendly check for pdflatex
-HAVE_PDFLATEX := $(shell if which pdflatex >/dev/null 2>&1; then echo 1; else echo 0; fi)
+HAVE_PDFLATEX := $(shell if which xelatex >/dev/null 2>&1; then echo 1; else echo 0; fi)
 
 # Internal variables.
 PAPEROPT_a4     = -D latex_paper_size=a4
@@ -68,11 +68,11 @@ htmldocs:
 
 pdfdocs:
 ifeq ($(HAVE_PDFLATEX),0)
-	$(warning The 'pdflatex' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
+	$(warning The 'xelatex' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
 	@echo "  SKIP    Sphinx $@ target."
 else # HAVE_PDFLATEX
-	@$(call loop_cmd,sphinx,latex,.,latex,.))
-	$(Q)$(MAKE) -C $(BUILDDIR)/latex
+	@$(call loop_cmd,sphinx,latex,.,latex,.)
+	$(Q)$(MAKE) PDFLATEX=xelatex LATEXOPTS="-interaction=nonstopmode" -C $(BUILDDIR)/latex
 endif # HAVE_PDFLATEX
 
 epubdocs:

Documentation/arm/sunxi/README

@@ -73,4 +73,13 @@ SunXi family
     * Octa ARM Cortex-A7 based SoCs
       - Allwinner A83T
         + Datasheet
-          http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf
+          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_Datasheet_v1.3_20150510.pdf
+        + User Manual
+          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_User_Manual_v1.5.1_20150513.pdf
+
+    * Quad ARM Cortex-A53 based SoCs
+      - Allwinner A64
+        + Datasheet
+          http://dl.linux-sunxi.org/A64/A64_Datasheet_V1.1.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf

Documentation/conf.py

@@ -14,6 +14,11 @@
 
 import sys
 import os
+import sphinx
+
+# Get Sphinx version
+major, minor, patch = map(int, sphinx.__version__.split("."))
+
 
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
@@ -31,12 +36,11 @@ from load_config import loadConfig
 # ones.
 extensions = ['kernel-doc', 'rstFlatTable', 'kernel_include']
 
-# Gracefully handle missing rst2pdf.
-try:
-    import rst2pdf
-    extensions += ['rst2pdf.pdfbuilder']
-except ImportError:
-    pass
+# The name of the math extension changed on Sphinx 1.4
+if minor > 3:
+    extensions.append("sphinx.ext.imgmath")
+else:
+    extensions.append("sphinx.ext.pngmath")
 
 # Add any paths that contain templates here, relative to this directory.
 templates_path = ['_templates']
@@ -253,16 +257,56 @@ htmlhelp_basename = 'TheLinuxKerneldoc'
 
 latex_elements = {
 # The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
+'papersize': 'a4paper',
 
 # The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
-
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
+'pointsize': '8pt',
 
 # Latex figure (float) alignment
 #'figure_align': 'htbp',
+
+# Don't mangle with UTF-8 chars
+'inputenc': '',
+'utf8extra': '',
+
+# Additional stuff for the LaTeX preamble.
+    'preamble': '''
+	% Adjust margins
+	\\usepackage[margin=0.5in, top=1in, bottom=1in]{geometry}
+
+        % Allow generate some pages in landscape
+        \\usepackage{lscape}
+
+        % Put notes in gray color and let them be inside a table
+
+        \\definecolor{MyGray}{rgb}{0.80,0.80,0.80}
+
+        \\makeatletter\\newenvironment{graybox}{%
+           \\begin{lrbox}{\\@tempboxa}\\begin{minipage}{\\columnwidth}}{\\end{minipage}\\end{lrbox}%
+           \\colorbox{MyGray}{\\usebox{\\@tempboxa}}
+        }\\makeatother
+
+        \\makeatletter
+        \\renewenvironment{notice}[2]{
+          \\begin{graybox}
+          \\bf\\it
+          \\def\\py@noticetype{#1}
+          \\par\\strong{#2}
+          \\csname py@noticestart@#1\\endcsname
+        }
+	{
+          \\csname py@noticeend@\\py@noticetype\\endcsname
+          \\end{graybox}
+        }
+	\\makeatother
+
+	% Use some font with UTF-8 support with XeLaTeX
+        \\usepackage{fontspec}
+        \\setsansfont{DejaVu Serif}
+        \\setromanfont{DejaVu Sans}
+        \\setmonofont{DejaVu Sans Mono}
+
+     '''
 }
 
 # Grouping the document tree into LaTeX files. List of tuples

Documentation/gpu/conf.py

@@ -1,3 +1,5 @@
 # -*- coding: utf-8; mode: python -*-
 
 project = "Linux GPU Driver Developer's Guide"
+
+tags.add("subproject")

Documentation/gpu/index.rst

@@ -12,3 +12,10 @@ Linux GPU Driver Developer's Guide
    drm-uapi
    i915
    vga-switcheroo
+
+.. only::  subproject
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/index.rst

@@ -19,4 +19,3 @@ Indices and tables
 ==================
 
 * :ref:`genindex`
-* :ref:`search`

Documentation/kasan.txt

@@ -12,7 +12,7 @@ KASAN uses compile-time instrumentation for checking every memory access,
 therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is
 required for detection of out-of-bounds accesses to stack or global variables.
 
-Currently KASAN is supported only for x86_64 architecture.
+Currently KASAN is supported only for x86_64 and arm64 architecture.
 
 1. Usage
 ========

Documentation/kbuild/kconfig-language.txt

@@ -274,7 +274,44 @@ menuconfig:
 
 This is similar to the simple config entry above, but it also gives a
 hint to front ends, that all suboptions should be displayed as a
-separate list of options.
+separate list of options. To make sure all the suboptions will really
+show up under the menuconfig entry and not outside of it, every item
+from the <config options> list must depend on the menuconfig symbol.
+In practice, this is achieved by using one of the next two constructs:
+
+(1):
+menuconfig M
+if M
+    config C1
+    config C2
+endif
+
+(2):
+menuconfig M
+config C1
+    depends on M
+config C2
+    depends on M
+
+In the following examples (3) and (4), C1 and C2 still have the M
+dependency, but will not appear under menuconfig M anymore, because
+of C0, which doesn't depend on M:
+
+(3):
+menuconfig M
+    config C0
+if M
+    config C1
+    config C2
+endif
+
+(4):
+menuconfig M
+config C0
+config C1
+    depends on M
+config C2
+    depends on M
 
 choices:
 

Documentation/kernel-parameters.txt

@@ -1688,7 +1688,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	intel_idle.max_cstate=	[KNL,HW,ACPI,X86]
 			0	disables intel_idle and fall back on acpi_idle.
-			1 to 6	specify maximum depth of C-state.
+			1 to 9	specify maximum depth of C-state.
 
 	intel_pstate=  [X86]
 		       disable

Documentation/kprobes.txt

@@ -103,6 +103,16 @@ Note that the probed function's args may be passed on the stack
 or in registers.  The jprobe will work in either case, so long as the
 handler's prototype matches that of the probed function.
 
+Note that in some architectures (e.g.: arm64 and sparc64) the stack
+copy is not done, as the actual location of stacked parameters may be
+outside of a reasonable MAX_STACK_SIZE value and because that location
+cannot be determined by the jprobes code. In this case the jprobes
+user must be careful to make certain the calling signature of the
+function does not cause parameters to be passed on the stack (e.g.:
+more than eight function arguments, an argument of more than sixteen
+bytes, or more than 64 bytes of argument data, depending on
+architecture).
+
 1.3 Return Probes
 
 1.3.1 How Does a Return Probe Work?

Documentation/media/conf.py

@@ -1,3 +1,5 @@
 # -*- coding: utf-8; mode: python -*-
 
 project = 'Linux Media Subsystem Documentation'
+
+tags.add("subproject")

Documentation/media/index.rst

@@ -10,3 +10,10 @@ Contents:
    media_kapi
    dvb-drivers/index
    v4l-drivers/index
+
+.. only::  subproject
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/serial/serial-rs485.txt

@@ -45,9 +45,8 @@
 
 	#include <linux/serial.h>
 
-	/* RS485 ioctls: */
-	#define TIOCGRS485      0x542E
-	#define TIOCSRS485      0x542F
+	/* Include definition for RS485 ioctls: TIOCGRS485 and TIOCSRS485 */
+	#include <sys/ioctl.h>
 
 	/* Open your specific device (e.g., /dev/mydevice): */
 	int fd = open ("/dev/mydevice", O_RDWR);

Documentation/sphinx/parse-headers.pl

@@ -220,7 +220,7 @@ $data =~ s/\n\s+\n/\n\n/g;
 #
 # Add escape codes for special characters
 #
-$data =~ s,([\_\`\*\<\>\&\\\\:\/\|]),\\$1,g;
+$data =~ s,([\_\`\*\<\>\&\\\\:\/\|\%\$\#\{\}\~\^]),\\$1,g;
 
 $data =~ s,DEPRECATED,**DEPRECATED**,g;