These fixes are needed to fix non-omap build breakage for

twl-core driver and to fix omap1_defconfig compile when led driver changes and omap sparse IRQ changes are merged together. Also fix warnings for omaps not using pinctrl framework yet. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQV9rrAAoJEBvUPslcq6Vz2AEQAIwbb/tKUgxubP6i31fuy/33 rP5RsgEMcnh3lD81+3G3hWECvxkfbs2LM06qi20YG90SPXYVd9koIWil407gvcTQ Nqq+36QBDsQo06ou1Pmy0DeBJ8yo2j3YU+lB6m+Qn7WS+KPqrebt/DMFdMW3Yfc3 zZ87DMfw/5S787z2Uru2CLGLpgv3bOooLvJYv0xBgkKTsRmJGIKJQJ7QoXIQMves 0sLAm/nORu7UU7WvYHd+tU/gC4svfm3WEL+QX4vNvPszCQdTayh7kdZN02eaNLJF vTUNiKjsW/xmda8+XS6YhP6lPFTPoCkDJWrIZqSWFaCnIIpsQZ+IBNdQMiB8uLtR eMdngBqIDTmRo5BOLMM/6eU2yzZ/PLeJI1pMQOTylgz2qaugQEnd77mIzEj6sNVn qSNtAwXTiBEhvA+8cjgsePnJxNtBdwcZ1c8YpEWigFC3cGOl3vHpt0XimIUfrkYX kKMHnVe9WHQGPFXdkA48ZXrACwzrDb1/3GUVbtGM7rX6/OiS6b4iJzplvBN4j1t1 eOH670dVbU2LhkStHhzV2rbQm7LUyVECkn+CGh13VRJDQrVlzA70g6Vp2KBNkgM+ bxyE7sirHHtzeJtFelYGeuRJ1RULAPxPBrVX7kPsrwcSAshKFnuAC6f9IQjCy3jf uYcmix5Qg14mN18H0l6S =omEP -----END PGP SIGNATURE----- Merge tag 'cleanup-fixes-for-v3.7' into test_v3.6-rc6_cff3.7_odaf3.7 These fixes are needed to fix non-omap build breakage for twl-core driver and to fix omap1_defconfig compile when led driver changes and omap sparse IRQ changes are merged together. Also fix warnings for omaps not using pinctrl framework yet.
2024-11-25 13:20:52 +07:00 · 2012-09-22 10:00:11 -06:00 · 2012-09-22 10:00:11 -06:00 · 5dbd6535d5
commit 5dbd6535d5
parent 5698bd757d de6ca33a96
376 changed files with 7886 additions and 10932 deletions
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@ -17,3 +17,12 @@ Description:
 		 device, like 'tty1'.
 		 The file supports poll() to detect virtual
 		 console switches.
+
+What:		/sys/class/tty/ttyS0/uartclk
+Date:		Sep 2012
+Contact:	Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+		 Shows the current uartclk value associated with the
+		 UART port in serial_core, that is bound to TTY like ttyS0.
+		 uartclk = 16 * baud_base
+
--- a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt
@ -0,0 +1,14 @@
+* NXP LPC32xx SoC High Speed UART
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-hsuart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Example:
+
+	uart1: serial@40014000 {
+		compatible = "nxp,lpc3220-hsuart";
+		reg = <0x40014000 0x1000>;
+		interrupts = <26 0>;
+	};
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@ -25,6 +25,8 @@ Optional properties:
  accesses to the UART (e.g. TI davinci).
 - used-by-rtas : set to indicate that the port is in use by the OpenFirmware
  RTAS and should not be registered.
+- no-loopback-test: set to indicate that the port does not implements loopback
+  test mode

 Example:

--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@ -2,8 +2,6 @@
 	- this file.
 README.cycladesZ
 	- info on Cyclades-Z firmware loading.
-computone.txt
-	- info on Computone Intelliport II/Plus Multiport Serial Driver.
 digiepca.txt
 	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
 hayes-esp.txt
--- a/Documentation/serial/computone.txt
+++ b/Documentation/serial/computone.txt
@ -1,520 +0,0 @@
-NOTE: This is an unmaintained driver.  It is not guaranteed to work due to
-changes made in the tty layer in 2.6.  If you wish to take over maintenance of
-this driver, contact Michael Warfield <mhw@wittsend.com>.
-
-Changelog:
----------
-11-01-2001:	Original Document
-
-10-29-2004:	Minor misspelling & format fix, update status of driver.
-		James Nelson <james4765@gmail.com>
-
-Computone Intelliport II/Plus Multiport Serial Driver
-----------------------------------------------------
-
-Release Notes For Linux Kernel 2.2 and higher.
-These notes are for the drivers which have already been integrated into the
-kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4.
-
-Version: 1.2.14
-Date: 11/01/2001
-Historical Author: Andrew Manison <amanison@america.net>
-Primary Author: Doug McNash
-
-This file assumes that you are using the Computone drivers which are
-integrated into the kernel sources.  For updating the drivers or installing
-drivers into kernels which do not already have Computone drivers, please
-refer to the instructions in the README.computone file in the driver patch.
-
-
-1. INTRODUCTION
-
-This driver supports the entire family of Intelliport II/Plus controllers
-with the exception of the MicroChannel controllers.  It does not support
-products previous to the Intelliport II.
-
-This driver was developed on the v2.0.x Linux tree and has been tested up
-to v2.4.14; it will probably not work with earlier v1.X kernels,.
-
-
-2. QUICK INSTALLATION
-
-Hardware - If you have an ISA card, find a free interrupt and io port. 
-		   List those in use with `cat /proc/interrupts` and 
-		   `cat /proc/ioports`.  Set the card dip switches to a free 
-		   address.  You may need to configure your BIOS to reserve an
-		   irq for an ISA card.  PCI and EISA parameters are set
-		   automagically.  Insert card into computer with the power off 
-		   before or after drivers installation.
-
-	Note the hardware address from the Computone ISA cards installed into
-		the system.  These are required for editing ip2.c or editing
-		/etc/modprobe.d/*.conf, or for specification on the modprobe
-		command line.
-
-	Note that the /etc/modules.conf should be used for older (pre-2.6)
-		kernels.
-
-Software -
-
-Module installation:
-
-a) Determine free irq/address to use if any (configure BIOS if need be)
-b) Run "make config" or "make menuconfig" or "make xconfig"
-   Select (m) module for CONFIG_COMPUTONE under character
-   devices.  CONFIG_PCI and CONFIG_MODULES also may need to be set.
-c) Set address on ISA cards then:
-   edit /usr/src/linux/drivers/char/ip2.c if needed 
-	or
-   edit config file in  /etc/modprobe.d/ if needed (module).
-	or both to match this setting.
-d) Run "make modules"
-e) Run "make modules_install"
-f) Run "/sbin/depmod -a"
-g) install driver using `modprobe ip2 <options>` (options listed below)
-h) run ip2mkdev (either the script below or the binary version)
-
-
-Kernel installation:
-
-a) Determine free irq/address to use if any (configure BIOS if need be)
-b) Run "make config" or "make menuconfig" or "make xconfig"
-   Select (y) kernel for CONFIG_COMPUTONE under character
-   devices.  CONFIG_PCI may need to be set if you have PCI bus.
-c) Set address on ISA cards then:
-	   edit /usr/src/linux/drivers/char/ip2.c  
-           (Optional - may be specified on kernel command line now)
-d) Run "make zImage" or whatever target you prefer.
-e) mv /usr/src/linux/arch/x86/boot/zImage to /boot.
-f) Add new config for this kernel into /etc/lilo.conf, run "lilo"
-	or copy to a floppy disk and boot from that floppy disk.
-g) Reboot using this kernel
-h) run ip2mkdev (either the script below or the binary version)
-
-Kernel command line options:
-
-When compiling the driver into the kernel, io and irq may be
-compiled into the driver by editing ip2.c and setting the values for
-io and irq in the appropriate array.  An alternative is to specify
-a command line parameter to the kernel at boot up.
-
-        ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
-
-Note that this order is very different from the specifications for the
-modload parameters which have separate IRQ and IO specifiers.
-
-The io port also selects PCI (1) and EISA (2) boards.
-
-        io=0    No board
-        io=1    PCI board
-        io=2    EISA board
-        else    ISA board io address
-
-You only need to specify the boards which are present.
-
-        Examples:
-
-                2 PCI boards:
-
-                        ip2=1,0,1,0
-
-                1 ISA board at 0x310 irq 5:
-
-                        ip2=0x310,5
-
-This can be added to and "append" option in lilo.conf similar to this:
-
-        append="ip2=1,0,1,0"
-
-
-3. INSTALLATION
-
-Previously, the driver sources were packaged with a set of patch files
-to update the character drivers' makefile and configuration file, and other 
-kernel source files. A build script (ip2build) was included which applies 
-the patches if needed, and build any utilities needed.
-What you receive may be a single patch file in conventional kernel
-patch format build script. That form can also be applied by
-running patch -p1 < ThePatchFile.  Otherwise run ip2build.
- 
-The driver can be installed as a module (recommended) or built into the 
-kernel. This is selected as for other drivers through the `make config`
-command from the root of the Linux source tree. If the driver is built 
-into the kernel you will need to edit the file ip2.c to match the boards 
-you are installing. See that file for instructions. If the driver is 
-installed as a module the configuration can also be specified on the
-modprobe command line as follows:
-
-	modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4
-
-where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11,
-12,15) and addr1-4 are the base addresses for up to four controllers. If 
-the irqs are not specified the driver uses the default in ip2.c (which 
-selects polled mode). If no base addresses are specified the defaults in 
-ip2.c are used. If you are autoloading the driver module with kerneld or
-kmod the base addresses and interrupt number must also be set in ip2.c
-and recompile or just insert and options line in /etc/modprobe.d/*.conf or both.
-The options line is equivalent to the command line and takes precedence over
-what is in ip2.c. 
-
-config sample to put /etc/modprobe.d/*.conf:
-	options ip2 io=1,0x328 irq=1,10
-	alias char-major-71 ip2
-	alias char-major-72 ip2
-	alias char-major-73 ip2
-
-The equivalent in ip2.c:
-
-static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 };
-static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; 
-
-The equivalent for the kernel command line (in lilo.conf):
-
-        append="ip2=1,1,0x328,10"
-
-
-Note:	Both io and irq should be updated to reflect YOUR system.  An "io"
-	address of 1 or 2 indicates a PCI or EISA card in the board table.
-	The PCI or EISA irq will be assigned automatically.
-
-Specifying an invalid or in-use irq will default the driver into
-running in polled mode for that card.  If all irq entries are 0 then
-all cards will operate in polled mode.
-
-If you select the driver as part of the kernel run :
-
-	make zlilo (or whatever you do to create a bootable kernel)
-
-If you selected a module run :
-
-	make modules && make modules_install
-
-The utility ip2mkdev (see 5 and 7 below) creates all the device nodes
-required by the driver.  For a device to be created it must be configured
-in the driver and the board must be installed. Only devices corresponding
-to real IntelliPort II ports are created. With multiple boards and expansion
-boxes this will leave gaps in the sequence of device names. ip2mkdev uses
-Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and
-cuf0 - cuf255 for callout devices.
-
-
-4. USING THE DRIVERS
-
-As noted above, the driver implements the ports in accordance with Linux
-conventions, and the devices should be interchangeable with the standard
-serial devices. (This is a key point for problem reporting: please make
-sure that what you are trying do works on the ttySx/cuax ports first; then 
-tell us what went wrong with the ip2 ports!)
-
-Higher speeds can be obtained using the setserial utility which remaps 
-38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. 
-Intelliport II installations using the PowerPort expansion module can
-use the custom speed setting to select the highest speeds: 153,600 bps,
-230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for
-custom baud rate configuration is fixed at 921,600 for cards/expansion
-modules with ST654's and 115200 for those with Cirrus CD1400's.  This
-corresponds to the maximum bit rates those chips are capable.  
-For example if the baud base is 921600 and the baud divisor is 18 then
-the custom rate is 921600/18 = 51200 bps.  See the setserial man page for
-complete details. Of course if stty accepts the higher rates now you can
-use that as well as the standard ioctls().
-
-
-5. ip2mkdev and assorted utilities...
-
-Several utilities, including the source for a binary ip2mkdev utility are
-available under .../drivers/char/ip2.  These can be build by changing to
-that directory and typing "make" after the kernel has be built.  If you do
-not wish to compile the binary utilities, the shell script below can be
-cut out and run as "ip2mkdev" to create the necessary device files.  To
-use the ip2mkdev script, you must have procfs enabled and the proc file
-system mounted on /proc.
-
-
-6. NOTES
-
-This is a release version of the driver, but it is impossible to test it
-in all configurations of Linux. If there is any anomalous behaviour that 
-does not match the standard serial port's behaviour please let us know.
-
-
-7. ip2mkdev shell script
-
-Previously, this script was simply attached here.  It is now attached as a
-shar archive to make it easier to extract the script from the documentation.
-To create the ip2mkdev shell script change to a convenient directory (/tmp
-works just fine) and run the following command:
-
-	unshar Documentation/serial/computone.txt
-		(This file)
-
-You should now have a file ip2mkdev in your current working directory with
-permissions set to execute.  Running that script with then create the
-necessary devices for the Computone boards, interfaces, and ports which
-are present on you system at the time it is run.
-
-
-#!/bin/sh
-# This is a shell archive (produced by GNU sharutils 4.2.1).
-# To extract the files from this archive, save it to some FILE, remove
-# everything before the `!/bin/sh' line above, then type `sh FILE'.
-#
-# Made on 2001-10-29 10:32 EST by <mhw@alcove.wittsend.com>.
-# Source directory was `/home2/src/tmp'.
-#
-# Existing files will *not* be overwritten unless `-c' is specified.
-#
-# This shar contains:
-# length mode       name
-# ------ ---------- ------------------------------------------
-#   4251 -rwxr-xr-x ip2mkdev
-#
-save_IFS="${IFS}"
-IFS="${IFS}:"
-gettext_dir=FAILED
-locale_dir=FAILED
-first_param="$1"
-for dir in $PATH
-do
-  if test "$gettext_dir" = FAILED && test -f $dir/gettext \
-     && ($dir/gettext --version >/dev/null 2>&1)
-  then
-    set `$dir/gettext --version 2>&1`
-    if test "$3" = GNU
-    then
-      gettext_dir=$dir
-    fi
-  fi
-  if test "$locale_dir" = FAILED && test -f $dir/shar \
-     && ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
-  then
-    locale_dir=`$dir/shar --print-text-domain-dir`
-  fi
-done
-IFS="$save_IFS"
-if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
-then
-  echo=echo
-else
-  TEXTDOMAINDIR=$locale_dir
-  export TEXTDOMAINDIR
-  TEXTDOMAIN=sharutils
-  export TEXTDOMAIN
-  echo="$gettext_dir/gettext -s"
-fi
-if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then
-  shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"'
-elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then
-  shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"'
-elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then
-  shar_touch='touch -am $3$4$5$6$2 "$8"'
-else
-  shar_touch=:
-  echo
-  $echo 'WARNING: not restoring timestamps.  Consider getting and'
-  $echo "installing GNU \`touch', distributed in GNU File Utilities..."
-  echo
-fi
-rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch
-#
-if mkdir _sh17581; then
-  $echo 'x -' 'creating lock directory'
-else
-  $echo 'failed to create lock directory'
-  exit 1
-fi
-# ============= ip2mkdev ==============
-if test -f 'ip2mkdev' && test "$first_param" != -c; then
-  $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)'
-else
-  $echo 'x -' extracting 'ip2mkdev' '(text)'
-  sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' &&
-#!/bin/sh -
-#
-#	ip2mkdev
-#
-#	Make or remove devices as needed for Computone Intelliport drivers
-#
-#	First rule!  If the dev file exists and you need it, don't mess
-#	with it.  That prevents us from screwing up open ttys, ownership
-#	and permissions on a running system!
-#
-#	This script will NOT remove devices that no longer exist if their
-#	board or interface box has been removed.  If you want to get rid
-#	of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*"
-#	before running this script.  Running this script will then recreate
-#	all the valid devices.
-#
-#	Michael H. Warfield
-#	/\/\|=mhw=|\/\/
-#	mhw@wittsend.com
-#
-#	Updated 10/29/2000 for version 1.2.13 naming convention
-#		under devfs.	/\/\|=mhw=|\/\/
-#
-#	Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/
-#
-X
-if test -d /dev/ip2 ; then
-#	This is devfs mode...  We don't do anything except create symlinks
-#	from the real devices to the old names!
-X	cd /dev
-X	echo "Creating symbolic links to devfs devices"
-X	for i in `ls ip2` ; do
-X		if test ! -L ip2$i ; then
-X			# Remove it incase it wasn't a symlink (old device)
-X			rm -f ip2$i
-X			ln -s ip2/$i ip2$i
-X		fi
-X	done
-X	for i in `( cd tts ; ls F* )` ; do
-X		if test ! -L tty$i ; then
-X			# Remove it incase it wasn't a symlink (old device)
-X			rm -f tty$i
-X			ln -s tts/$i tty$i
-X		fi
-X	done
-X	for i in `( cd cua ; ls F* )` ; do
-X		DEVNUMBER=`expr $i : 'F\(.*\)'`
-X		if test ! -L cuf$DEVNUMBER ; then
-X			# Remove it incase it wasn't a symlink (old device)
-X			rm -f cuf$DEVNUMBER
-X			ln -s cua/$i cuf$DEVNUMBER
-X		fi
-X	done
-X	exit 0
-fi
-X
-if test ! -f /proc/tty/drivers
-then
-X	echo "\
-Unable to check driver status.
-Make sure proc file system is mounted."
-X
-X	exit 255
-fi
-X
-if test ! -f /proc/tty/driver/ip2
-then
-X	echo "\
-Unable to locate ip2 proc file.
-Attempting to load driver"
-X
-X	if /sbin/insmod ip2
-X	then
-X		if test ! -f /proc/tty/driver/ip2
-X		then
-X			echo "\
-Unable to locate ip2 proc file after loading driver.
-Driver initialization failure or driver version error.
-"
-X		exit 255
-X		fi
-X	else
-X		echo "Unable to load ip2 driver."
-X		exit 255
-X	fi
-fi
-X
-# Ok...  So we got the driver loaded and we can locate the procfs files.
-# Next we need our major numbers.
-X
-TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ 	]*[ 	]*\([0-9]*\)[ 	]*.*/\1/' < /proc/tty/drivers`
-CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ 	]*[ 	]*\([0-9]*\)[ 	]*.*/\1/' < /proc/tty/drivers`
-BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ 	]*.*/\1/' < /proc/tty/driver/ip2`
-X
-echo "\
-TTYMAJOR = $TTYMAJOR
-CUAMAJOR = $CUAMAJOR
-BRDMAJOR = $BRDMAJOR
-"
-X
-# Ok...  Now we should know our major numbers, if appropriate...
-# Now we need our boards and start the device loops.
-X
-grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest
-do
-X	# The test for blank "type" will catch the stats lead-in lines
-X	# if they exist in the file
-X	if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = ""
-X	then
-X		continue
-X	fi
-X
-X	BOARDNO=`expr "$number" : '\([0-9]\):'`
-X	PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '`
-X	MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '`
-X
-X	if test "$BOARDNO" = "" -o "$PORTS" = ""
-X	then
-#	This may be a bug.  We should at least get this much information
-X		echo "Unable to process board line"
-X		continue
-X	fi
-X
-X	if test "$MINORS" = ""
-X	then
-#	Silently skip this one.  This board seems to have no boxes
-X		continue
-X	fi
-X
-X	echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS"
-X
-X	if test "$BRDMAJOR" != ""
-X	then
-X		BRDMINOR=`expr $BOARDNO \* 4`
-X		STSMINOR=`expr $BRDMINOR + 1`
-X		if test ! -c /dev/ip2ipl$BOARDNO ; then
-X			mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR
-X		fi
-X		if test ! -c /dev/ip2stat$BOARDNO ; then
-X			mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR
-X		fi
-X	fi
-X
-X	if test "$TTYMAJOR" != ""
-X	then
-X		PORTNO=$BOARDBASE
-X
-X		for PORTNO in $MINORS
-X		do
-X			if test ! -c /dev/ttyF$PORTNO ; then
-X				# We got the hardware but no device - make it
-X				mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO
-X			fi	
-X		done
-X	fi
-X
-X	if test "$CUAMAJOR" != ""
-X	then
-X		PORTNO=$BOARDBASE
-X
-X		for PORTNO in $MINORS
-X		do
-X			if test ! -c /dev/cuf$PORTNO ; then
-X				# We got the hardware but no device - make it
-X				mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO
-X			fi	
-X		done
-X	fi
-done
-X
-Xexit 0
-SHAR_EOF
-  (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") &&
-  chmod 0755 'ip2mkdev' ||
-  $echo 'restore of' 'ip2mkdev' 'failed'
-  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
-  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
-    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
-    || $echo 'ip2mkdev:' 'MD5 check failed'
-cb5717134509f38bad9fde6b1f79b4a4  ip2mkdev
-SHAR_EOF
-  else
-    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`"
-    test 4251 -eq "$shar_count" ||
-    $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!"
-  fi
-fi
-rm -fr _sh17581
-exit 0
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@ -223,6 +223,7 @@ srmcons_init(void)
 		driver->subtype = SYSTEM_TYPE_SYSCONS;
 		driver->init_termios = tty_std_termios;
 		tty_set_operations(driver, &srmcons_ops);
+		tty_port_link_device(&srmcons_singleton.port, driver, 0);
 		err = tty_register_driver(driver);
 		if (err) {
 			put_tty_driver(driver);
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@ -18,6 +18,7 @@

 #include <plat/board-ams-delta.h>

+#include <mach/irqs.h>
 #include <mach/ams-delta-fiq.h>

 #include "iomap.h"
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@ -26,6 +26,7 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>

 #include <media/soc_camera.h>

@ -37,7 +38,6 @@
 #include <plat/board-ams-delta.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
-#include <plat/board.h>

 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@ -32,7 +32,6 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
-#include <plat/board.h>

 #include <mach/hardware.h>

--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@ -23,7 +23,6 @@
 #include <asm/mach/map.h>

 #include <plat/mux.h>
-#include <plat/board.h>

 #include <mach/usb.h>

@ -52,9 +51,6 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
 };
 #endif

-static struct omap_board_config_kernel generic_config[] __initdata = {
-};
-
 static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
@ -76,8 +72,6 @@ static void __init omap_generic_init(void)
 	}
 #endif

-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@ -31,6 +31,7 @@
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>

 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@ -31,6 +31,7 @@
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>

 #include <asm/setup.h>
 #include <asm/page.h>
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@ -41,8 +41,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

-#include <plat/omap7xx.h>
-#include <plat/board.h>
+#include <mach/omap7xx.h>
 #include <plat/keypad.h>
 #include <plat/mmc.h>

--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@ -26,7 +26,6 @@
 #include <asm/mach/map.h>

 #include <plat/mux.h>
-#include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@ -39,6 +39,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap1_bl.h>

 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@ -28,6 +28,7 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/omap1_bl.h>

 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@ -37,7 +38,6 @@
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>

--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@ -27,6 +27,7 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>

 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@ -37,7 +38,6 @@
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>

--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@ -30,6 +30,7 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>

 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@ -39,7 +40,6 @@
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>

--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@ -32,7 +32,6 @@
 #include <plat/fpga.h>
 #include <plat/flash.h>
 #include <plat/keypad.h>
-#include <plat/board.h>

 #include <mach/hardware.h>

--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@ -38,7 +38,6 @@
 #include <plat/dma.h>
 #include <plat/irda.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>

--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@ -35,7 +35,6 @@
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
-#include <plat/board.h>

 #include <mach/hardware.h>
 #include <mach/usb.h>
@ -155,9 +154,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 	.pins[2]	= 6,
 };

-static struct omap_board_config_kernel voiceblue_config[] = {
-};
-
 #define MACHINE_PANICED		1
 #define MACHINE_REBOOTING	2
 #define MACHINE_REBOOT		4
@ -275,8 +271,6 @@ static void __init voiceblue_init(void)
 	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
 	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_board_config = voiceblue_config;
-	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
 	omap1_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@ -25,7 +25,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/clkdev_omap.h>
-#include <plat/board.h>
 #include <plat/sram.h>	/* for omap_sram_reprogram_clock() */

 #include <mach/hardware.h>
@ -788,7 +787,6 @@ u32 cpu_mask;
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
-	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
 	u32 reg;

@ -837,12 +835,6 @@ int __init omap1_clk_init(void)
 	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
 	ck_ref_p = clk_get(NULL, "ck_ref");

-	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-	if (info != NULL) {
-		if (!cpu_is_omap15xx())
-			crystal_type = info->system_clock_type;
-	}
-
 	if (cpu_is_omap7xx())
 		ck_ref.rate = 13000000;
 	if (cpu_is_omap16xx() && crystal_type == 2)
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@ -20,12 +20,11 @@
 #include <asm/mach/map.h>

 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/mmc.h>
-#include <plat/omap7xx.h>

+#include <mach/omap7xx.h>
 #include <mach/camera.h>
 #include <mach/hardware.h>

--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@ -27,7 +27,8 @@

 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/irqs.h>
+
+#include <mach/irqs.h>

 #define OMAP1_DMA_BASE			(0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT	17
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@ -17,6 +17,7 @@
 */

 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>

 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE		0xFFFCE000
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@ -17,6 +17,7 @@
 */

 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>

 #define OMAP1610_GPIO1_BASE		0xfffbe400
 #define OMAP1610_GPIO2_BASE		0xfffbec00
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@ -17,6 +17,7 @@
 */

 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>

 #define OMAP7XX_GPIO1_BASE		0xfffbc000
 #define OMAP7XX_GPIO2_BASE		0xfffbc800
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@ -14,8 +14,6 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H

-#include <plat/irqs.h>
-
 /*
 * Interrupt number used for passing control from FIQ to IRQ.
 * IRQ12, described as reserved, has been selected.
--- a/arch/arm/mach-omap1/include/mach/gpio.h
+++ b/arch/arm/mach-omap1/include/mach/gpio.h
@ -1,5 +1,3 @@
 /*
 * arch/arm/mach-omap1/include/mach/gpio.h
 */
-
-#include <plat/gpio.h>
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@ -1,11 +1,46 @@
 /*
 * arch/arm/mach-omap1/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H

+#include <asm/sizes.h>
 #ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+
 /*
 * NOTE: Please use ioremap + __raw_read/write where possible instead of these
 */
@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void)
 			? 0 : OMAP_CS3_PHYS;
 }

-#endif
+#endif	/* ifndef __ASSEMBLER__ */
+
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
 #endif

-#include <plat/hardware.h>
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap7xx.h"
+#include "omap1510.h"
+#include "omap16xx.h"
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@ -1,5 +1,268 @@
 /*
- * arch/arm/mach-omap1/include/mach/irqs.h
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
 */

-#include <plat/irqs.h>
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+#define NR_IRQS			OMAP_FPGA_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
+#endif
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap1510.h
- *
+/*
 * Hardware definitions for TI OMAP1510 processor.
 *
 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
--- a/arch/arm/mach-omap1/include/mach/omap16xx.h
+++ b/arch/arm/mach-omap1/include/mach/omap16xx.h
@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap16xx.h
- *
+/*
 * Hardware definitions for TI OMAP1610/5912/1710 processors.
 *
 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
--- a/arch/arm/mach-omap1/include/mach/omap7xx.h
+++ b/arch/arm/mach-omap1/include/mach/omap7xx.h
@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap7xx.h
- *
+/*
 * Hardware definitions for TI OMAP7XX processor.
 *
 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@ -14,6 +14,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>

 #include <mach/hardware.h>
 #include <asm/leds.h>
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@ -6,6 +6,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/platform_data/gpio-omap.h>

 #include <asm/leds.h>
 #include <asm/mach-types.h>
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@ -22,7 +22,6 @@

 #include <asm/mach-types.h>

-#include <plat/board.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>

--- a/arch/arm/plat-omap/include/plat/am33xx.h
+++ b/arch/arm/plat-omap/include/plat/am33xx.h
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@ -33,7 +33,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
@ -212,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
 };

 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 };

 static struct twl4030_platform_data sdp2430_twldata = {
@ -235,7 +231,7 @@ static int __init omap2430_i2c_init(void)
 	sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
 	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+	omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
 			&sdp2430_twldata);
 	return 0;
 }
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@ -25,13 +25,11 @@
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

 #include <plat/mcspi.h>
-#include <plat/board.h>
 #include <plat/usb.h>
 #include "common.h"
 #include <plat/dma.h>
@ -191,9 +189,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
 	.default_device	= &sdp3430_lcd_device,
 };

-static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@ -233,9 +228,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 }

 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(16) | BIT(17),
 	.setup		= sdp3430_twl_gpio_setup,
@ -576,8 +568,6 @@ static void __init omap_3430sdp_init(void)
 	int gpio_pendown;

 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	omap_hsmmc_init(mmc);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@ -17,7 +17,6 @@
 #include <asm/mach/arch.h>

 #include "common.h"
-#include <plat/board.h>
 #include <plat/gpmc-smc91x.h>
 #include <plat/usb.h>

@ -67,9 +66,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };

-static struct omap_board_config_kernel sdp_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@ -197,8 +193,6 @@ static struct flash_partitions sdp_flash_partitions[] = {
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	omap_board_config = sdp_config;
-	omap_board_config_size = ARRAY_SIZE(sdp_config);
 	zoom_peripherals_init();
 	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
 				  h8mbx00u0mer0em_sdrc_params);
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@ -28,13 +28,11 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>

-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
@ -45,6 +43,7 @@
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>

+#include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "control.h"
@ -544,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };

 static struct twl4030_platform_data sdp4430_twldata = {
@ -581,7 +579,7 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_V1V8 |
 			TWL_COMMON_REGULATOR_V2V1);
 	omap4_pmic_init("twl6030", &sdp4430_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+			&twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@ -21,12 +21,10 @@
 #include <linux/init.h>
 #include <linux/gpio.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>

@ -37,11 +35,6 @@
 #define GPIO_USB_POWER		35
 #define GPIO_USB_NRESET		38

-
-/* Board initialization */
-static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@ -67,9 +60,6 @@ static void __init am3517_crane_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);

-	omap_board_config = am3517_crane_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
-
 	/* Configure GPIO for EHCI port */
 	if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
 		pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@ -25,14 +25,13 @@
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>

-#include <mach/hardware.h>
 #include <mach/am35xx.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
@ -296,8 +295,7 @@ static struct resource am3517_hecc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@ -324,9 +322,6 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
 	platform_device_register(&am3517_hecc_device);
 }

-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@ -346,8 +341,6 @@ static struct omap2_hsmmc_info mmc[] = {

 static void __init am3517_evm_init(void)
 {
-	omap_board_config = am3517_evm_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);

 	am3517_evm_i2c_init();
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@ -29,13 +29,11 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>

 #include <plat/led.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>

--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@ -23,6 +23,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>

 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>
@ -37,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/nand.h>
 #include <plat/gpmc.h>
@ -470,9 +470,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 }

 static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup          = cm_t35_twl_gpio_setup,
 };

@ -714,13 +711,8 @@ static inline void cm_t35_init_mux(void) {}
 static inline void cm_t3730_init_mux(void) {}
 #endif

-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
 static void __init cm_t3x_common_init(void)
 {
-	omap_board_config = cm_t35_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@ -38,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/nand.h>
@ -90,8 +89,7 @@ static struct resource cm_t3517_hecc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
+		.start	= 24 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@ -249,9 +247,6 @@ static void __init cm_t3517_init_nand(void)
 static inline void cm_t3517_init_nand(void) {}
 #endif

-static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
@ -285,8 +280,6 @@ static void __init cm_t3517_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap_board_config = cm_t3517_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
 	cm_t3517_init_leds();
 	cm_t3517_init_nand();
 	cm_t3517_init_rtc();
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@ -32,15 +32,12 @@

 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
 #include <mach/id.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@ -56,7 +53,6 @@
 #include <linux/interrupt.h>

 #include "sdram-micron-mt46h32m32lf-6.h"
-
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
@ -236,9 +232,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 }

 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@ -16,13 +16,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
-#include <plat/irqs.h>

+#include <plat/cpu.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/onenand.h>
 #include <plat/tc.h>

+#include "common.h"
 #include "board-flash.h"

 #define REG_FPGA_REV			0x10
@ -140,7 +141,6 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.devsize		= nand_type;

 	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@ -16,11 +16,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>

-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>

-#include <plat/board.h>
 #include "common.h"
 #include "common-board-devices.h"

--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@ -27,20 +27,19 @@
 #include <linux/io.h>
 #include <linux/input/matrix_keypad.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
-#include "common.h"
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
+#include <plat/debug-devices.h>

 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>

+#include "common.h"
 #include "mux.h"
 #include "control.h"

--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@ -29,10 +29,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/onenand.h>
@ -425,9 +425,6 @@ static int igep_twl_gpio_setup(struct device *dev,
 };

 static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= igep_twl_gpio_setup,
 };
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@ -29,18 +29,14 @@
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

 #include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <mach/board-zoom.h>
-
-#include <asm/delay.h>
 #include <plat/usb.h>
 #include <plat/gpmc-smsc911x.h>

@ -275,9 +271,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 }

 static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= ldp_twl_gpio_setup,
 };

--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@ -25,14 +25,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/menelaus.h>
-#include <mach/irqs.h>
 #include <plat/mcspi.h>
 #include <plat/onenand.h>
 #include <plat/mmc.h>
-#include <plat/serial.h>

 #include "mux.h"

@ -600,7 +597,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
 static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
 	{
 		I2C_BOARD_INFO("menelaus", 0x72),
-		.irq = INT_24XX_SYS_NIRQ,
+		.irq = 7 + OMAP_INTC_START,
 		.platform_data = &n8x0_menelaus_platform_data,
 	},
 };
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@ -33,13 +33,11 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>

-#include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
@ -297,9 +295,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 }

 static struct twl4030_gpio_platform_data beagle_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@ -40,12 +40,10 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include <plat/usb.h>
 #include <plat/nand.h>
 #include "common.h"
@ -75,6 +73,18 @@
 #define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
 #define OMAP3EVM_GEN2_ETHR_GPIO_RST	7

+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
+
 static u8 omap3_evm_version;

 u8 get_omap3_evm_rev(void)
@ -377,9 +387,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 }

 static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3evm_twl_gpio_setup,
 };
@ -526,9 +533,6 @@ static int __init omap3_evm_i2c_init(void)
 	return 0;
 }

-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-};
-
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {

 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@ -688,9 +692,6 @@ static void __init omap3_evm_init(void)
 	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
 	omap3_mux_init(obm, OMAP_PACKAGE_CBB);

-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);

--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@ -30,24 +30,21 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#include <plat/mux.h>
-#include <plat/board.h>
-#include "common.h"
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
 #include <plat/usb.h>

+#include "common.h"
+#include "mux.h"
+#include "hsmmc.h"
+#include "control.h"
+#include "common-board-devices.h"
+
 #define OMAP3LOGIC_SMSC911X_CS			1

 #define OMAP3530_LV_SOM_MMC_GPIO_CD		110
@ -78,9 +75,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 };

 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@ -40,9 +40,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include "common.h"
-#include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
@ -321,9 +319,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 }

 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= omap3pandora_twl_gpio_setup,
 };

--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@ -28,14 +28,17 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@ -279,9 +282,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 }

 static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3stalker_twl_gpio_setup,
 };
@ -362,9 +362,6 @@ static int __init omap3_stalker_i2c_init(void)

 #define OMAP3_STALKER_TS_GPIO	175

-static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
-};
-
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
@ -399,8 +396,6 @@ static void __init omap3_stalker_init(void)
 {
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-	omap_board_config = omap3_stalker_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);

 	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@ -37,14 +37,12 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/system_info.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@ -139,9 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 }

 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@ -32,19 +32,18 @@
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>

-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <video/omapdss.h>

-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-tfp410.h>

+#include "soc.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "mux.h"
@ -263,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = {
 static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };

 /* Panda board uses the common PMIC configuration */
@ -294,7 +292,7 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_V1V8 |
 			TWL_COMMON_REGULATOR_V2V1);
 	omap4_pmic_init("twl6030", &omap4_panda_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+			&twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@ -42,16 +42,13 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>

-#include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
-#include <mach/hardware.h>
 #include <plat/nand.h>
 #include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/usb.h>

 #include "mux.h"
@ -399,9 +396,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 }

 static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= overo_twl_gpio_setup,
 };
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@ -27,6 +27,7 @@
 #include <plat/gpmc.h>
 #include "common.h"
 #include <plat/onenand.h>
+#include <plat/serial.h>

 #include "mux.h"
 #include "hsmmc.h"
@ -72,9 +73,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {

 /* TWL */
 static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pullups		= BIT(0),
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
@ -87,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = {
 static void __init rm680_i2c_init(void)
 {
 	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-	omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
+	omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 }
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@ -28,7 +28,6 @@
 #include <asm/system_info.h>

 #include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
@ -774,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 }

 static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
 				| BIT(4) | BIT(5)
 				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
@ -1051,7 +1047,7 @@ static int __init rx51_i2c_init(void)
 	rx51_twldata.vdac->constraints.apply_uV = true;
 	rx51_twldata.vdac->constraints.name = "VDAC";

-	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
+	omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@ -18,13 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

 #include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@ -15,13 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>

-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <plat/irqs.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>

@ -32,15 +29,10 @@ static struct omap_musb_board_data musb_board_data = {
 	.power		= 500,
 };

-static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
-};
-
 static void __init ti81xx_evm_init(void)
 {
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap_board_config = ti81xx_evm_config;
-	omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
 	usb_musb_init(&musb_board_data);
 }

--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@ -22,6 +22,9 @@

 #include <mach/board-zoom.h>

+#include "soc.h"
+#include "common.h"
+
 #define ZOOM_SMSC911X_CS	7
 #define ZOOM_SMSC911X_GPIO	158
 #define ZOOM_QUADUART_CS	3
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@ -18,6 +18,8 @@
 #include <video/omapdss.h>
 #include <mach/board-zoom.h>

+#include "common.h"
+
 #define LCD_PANEL_RESET_GPIO_PROD	96
 #define LCD_PANEL_RESET_GPIO_PILOT	55
 #define LCD_PANEL_QVGA_GPIO		56
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@ -19,6 +19,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>

 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@ -251,9 +252,6 @@ static void zoom2_set_hs_extmute(int mute)
 }

 static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= zoom_twl_gpio_setup,
 };

@ -281,7 +279,7 @@ static int __init omap_i2c_init(void)
 		codec_data->hs_extmute = 1;
 		codec_data->set_hs_extmute = zoom2_set_hs_extmute;
 	}
-	omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
+	omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>

 #include "common.h"
-#include <plat/board.h>
 #include <plat/usb.h>

 #include <mach/board-zoom.h>
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@ -33,11 +33,11 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>

-#include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>

+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@ -22,8 +22,8 @@
 #include <asm/div64.h>

 #include <plat/clock.h>
-#include <plat/cpu.h>

+#include "soc.h"
 #include "clock.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@ -22,14 +22,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <trace/events/power.h>

 #include <asm/cpu.h>
+
 #include <plat/clock.h>
-#include "clockdomain.h"
-#include <plat/cpu.h>
 #include <plat/prcm.h>

+#include <trace/events/power.h>
+
+#include "soc.h"
+#include "clockdomain.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@ -18,9 +18,9 @@
 #include <linux/clk.h>
 #include <linux/list.h>

-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>

+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@ -21,9 +21,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>

-#include <plat/hardware.h>
 #include <plat/clock.h>

+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@ -17,9 +17,9 @@
 #include <linux/clk.h>
 #include <linux/list.h>

-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>

+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
@ -1856,6 +1856,7 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X),
 	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X),
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
+	CLK("twl",	"fck",		&osc_ck,	CK_243X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_243X),
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@ -22,9 +22,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>

-#include <plat/cpu.h>
 #include <plat/clock.h>

+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm.h"
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <plat/clkdev_omap.h>
-#include <plat/am33xx.h>

+#include "am33xx.h"
 #include "iomap.h"
 #include "control.h"
 #include "clock.h"
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@ -21,9 +21,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>

-#include <plat/hardware.h>
 #include <plat/clock.h>

+#include "soc.h"
 #include "clock.h"
 #include "clock3xxx.h"
 #include "prm2xxx_3xxx.h"
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@ -21,9 +21,9 @@
 #include <linux/list.h>
 #include <linux/io.h>

-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>

+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock3xxx.h"
@ -3226,6 +3226,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"virt_26000000_ck",	&virt_26000000_ck,	CK_3XXX),
 	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
 	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
+	CLK("twl",	"fck",		&osc_sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@ -28,9 +28,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>

-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>

+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock44xx.h"
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@ -18,8 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>

-#include <plat/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "cm.h"
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@ -27,6 +27,7 @@
 #include <plat/mcspi.h>
 #include <plat/nand.h>

+#include "common.h"
 #include "common-board-devices.h"

 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@ -17,11 +17,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>

-#include <plat/hardware.h>
-#include <plat/board.h>
 #include <plat/mux.h>
 #include <plat/clock.h>

+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "sdrc.h"
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@ -26,11 +26,18 @@
 #define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
 #ifndef __ASSEMBLER__

+#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
-#include <plat/common.h>
+
 #include <asm/proc-fns.h>

+#include <plat/cpu.h>
+#include <plat/serial.h>
+#include <plat/common.h>
+
+#define OMAP_INTC_START		NR_IRQS
+
 #ifdef CONFIG_SOC_OMAP2420
 extern void omap242x_map_common_io(void);
 #else
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@ -15,9 +15,9 @@
 #include <linux/kernel.h>
 #include <linux/io.h>

-#include <plat/hardware.h>
 #include <plat/sdrc.h>

+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "cm-regbits-34xx.h"
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@ -21,7 +21,7 @@
 #include <mach/ctrl_module_pad_core_44xx.h>
 #include <mach/ctrl_module_pad_wkup_44xx.h>

-#include <plat/am33xx.h>
+#include "am33xx.h"

 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@ -28,7 +28,6 @@
 #include <linux/cpu_pm.h>

 #include <plat/prcm.h>
-#include <plat/irqs.h>
 #include "powerdomain.h"
 #include "clockdomain.h"

--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@ -17,21 +17,21 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>

-#include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/pmu.h>

 #include "iomap.h"
-#include <plat/board.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap4-keypad.h>

+#include "soc.h"
+#include "common.h"
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
@ -112,7 +112,7 @@ static struct resource omap2cam_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_24XX_CAM_IRQ,
+		.start		= 24 + OMAP_INTC_START,
 		.flags		= IORESOURCE_IRQ,
 	}
 };
@ -201,7 +201,7 @@ static struct resource omap3isp_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_34XX_CAM_IRQ,
+		.start		= 24 + OMAP_INTC_START,
 		.flags		= IORESOURCE_IRQ,
 	}
 };
@ -435,14 +435,12 @@ static inline void omap_init_mcspi(void) {}
 #endif

 static struct resource omap2_pmu_resource = {
-	.start	= 3,
-	.end	= 3,
+	.start	= 3 + OMAP_INTC_START,
 	.flags	= IORESOURCE_IRQ,
 };

 static struct resource omap3_pmu_resource = {
-	.start	= INT_34XX_BENCH_MPU_EMUL,
-	.end	= INT_34XX_BENCH_MPU_EMUL,
+	.start	= 3 + OMAP_INTC_START,
 	.flags	= IORESOURCE_IRQ,
 };

@ -475,7 +473,7 @@ static struct resource omap2_sham_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_24XX_SHA1MD5,
+		.start	= 51 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@ -493,7 +491,7 @@ static struct resource omap3_sham_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_34XX_SHA1MD52_IRQ,
+		.start	= 49 + OMAP_INTC_START,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
@ -631,6 +629,10 @@ static inline void omap_init_vout(void) {}

 static int __init omap2_init_devices(void)
 {
+	/* Enable dummy states for those platforms without pinctrl support */
+	if (!of_have_populated_dt())
+		pinctrl_provide_dummies();
+
 	/*
 	 * please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@ -28,9 +28,9 @@
 #include <linux/bitops.h>
 #include <linux/clkdev.h>

-#include <plat/cpu.h>
 #include <plat/clock.h>

+#include "soc.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@ -15,9 +15,9 @@
 #include <linux/io.h>
 #include <linux/bitops.h>

-#include <plat/cpu.h>
 #include <plat/clock.h>

+#include "soc.h"
 #include "clock.h"
 #include "clock44xx.h"
 #include "cm-regbits-44xx.h"
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@ -21,8 +21,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>

-#include <mach/hardware.h>
-
+#include "soc.h"
 #include "iomap.h"

 MODULE_LICENSE("GPL");
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
+#include <linux/platform_data/gpio-omap.h>

 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@ -16,20 +16,28 @@

 #include <asm/mach/flash.h>

-#include <plat/cpu.h>
 #include <plat/nand.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>

-static struct resource gpmc_nand_resource = {
-	.flags		= IORESOURCE_MEM,
+#include "soc.h"
+
+static struct resource gpmc_nand_resource[] = {
+	{
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
 };

 static struct platform_device gpmc_nand_device = {
 	.name		= "omap2-nand",
 	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &gpmc_nand_resource,
+	.num_resources	= ARRAY_SIZE(gpmc_nand_resource),
+	.resource	= gpmc_nand_resource,
 };

 static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
@ -75,6 +83,7 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
 		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
 	gpmc_cs_configure(gpmc_nand_data->cs,
 			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
+	gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
 	if (err)
 		return err;
@ -90,12 +99,19 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 	gpmc_nand_device.dev.platform_data = gpmc_nand_data;

 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-				&gpmc_nand_data->phys_base);
+				(unsigned long *)&gpmc_nand_resource[0].start);
 	if (err < 0) {
 		dev_err(dev, "Cannot request GPMC CS\n");
 		return err;
 	}

+	gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
+							NAND_IO_SIZE - 1;
+
+	gpmc_nand_resource[1].start =
+				gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
+	gpmc_nand_resource[2].start =
+				gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
 	 /* Set timings in GPMC */
 	err = omap2_nand_gpmc_retime(gpmc_nand_data);
 	if (err < 0) {
@ -108,6 +124,8 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
 	}

+	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+
 	err = platform_device_register(&gpmc_nand_device);
 	if (err < 0) {
 		dev_err(dev, "Unable to register NAND device\n");
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@ -18,16 +18,24 @@

 #include <asm/mach/flash.h>

-#include <plat/cpu.h>
 #include <plat/onenand.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>

+#include "soc.h"
+
+#define	ONENAND_IO_SIZE	SZ_128K
+
 static struct omap_onenand_platform_data *gpmc_onenand_data;

+static struct resource gpmc_onenand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
 static struct platform_device gpmc_onenand_device = {
 	.name		= "omap2-onenand",
 	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &gpmc_onenand_resource,
 };

 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
@ -390,6 +398,8 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)

 void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
+	int err;
+
 	gpmc_onenand_data = _onenand_data;
 	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
 	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
@ -401,8 +411,19 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
 	}

+	err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
+				(unsigned long *)&gpmc_onenand_resource.start);
+	if (err < 0) {
+		pr_err("%s: Cannot request GPMC CS\n", __func__);
+		return;
+	}
+
+	gpmc_onenand_resource.end = gpmc_onenand_resource.start +
+							ONENAND_IO_SIZE - 1;
+
 	if (platform_device_register(&gpmc_onenand_device) < 0) {
-		printk(KERN_ERR "Unable to register OneNAND device\n");
+		pr_err("%s: Unable to register OneNAND device\n", __func__);
+		gpmc_cs_free(gpmc_onenand_data->cs);
 		return;
 	}
 }
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@ -17,10 +17,11 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>

-#include <plat/board.h>
 #include <plat/gpmc.h>
 #include <plat/gpmc-smc91x.h>

+#include "soc.h"
+
 static struct omap_smc91x_platform_data *gpmc_cfg;

 static struct resource gpmc_smc91x_resources[] = {
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@ -20,7 +20,6 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>

-#include <plat/board.h>
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>

--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@ -28,8 +28,13 @@
 #include <asm/mach-types.h>
 #include <plat/gpmc.h>

+#include <plat/cpu.h>
+#include <plat/gpmc.h>
 #include <plat/sdrc.h>

+#include "soc.h"
+#include "common.h"
+
 /* GPMC register offsets */
 #define GPMC_REVISION		0x00
 #define GPMC_SYSCONFIG		0x10
@ -78,6 +83,15 @@
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2

+/* XXX: Only NAND irq has been considered,currently these are the only ones used
+ */
+#define	GPMC_NR_IRQ		2
+
+struct gpmc_client_irq	{
+	unsigned		irq;
+	u32			bitmask;
+};
+
 /* Structure to save gpmc cs context */
 struct gpmc_cs_config {
 	u32 config1;
@ -105,6 +119,10 @@ struct omap3_gpmc_regs {
 	struct gpmc_cs_config cs_context[GPMC_CS_NUM];
 };

+static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
+static struct irq_chip gpmc_irq_chip;
+static unsigned gpmc_irq_start;
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
@ -682,6 +700,117 @@ int gpmc_prefetch_reset(int cs)
 }
 EXPORT_SYMBOL(gpmc_prefetch_reset);

+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+	reg->gpmc_status = gpmc_base + GPMC_STATUS;
+	reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
+	reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
+	reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
+				GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
+	reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
+	reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
+	reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
+	reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
+	reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
+	reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
+	reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
+	reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
+	reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+}
+
+int gpmc_get_client_irq(unsigned irq_config)
+{
+	int i;
+
+	if (hweight32(irq_config) > 1)
+		return 0;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (gpmc_client_irq[i].bitmask & irq_config)
+			return gpmc_client_irq[i].irq;
+
+	return 0;
+}
+
+static int gpmc_irq_endis(unsigned irq, bool endis)
+{
+	int i;
+	u32 regval;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (irq == gpmc_client_irq[i].irq) {
+			regval = gpmc_read_reg(GPMC_IRQENABLE);
+			if (endis)
+				regval |= gpmc_client_irq[i].bitmask;
+			else
+				regval &= ~gpmc_client_irq[i].bitmask;
+			gpmc_write_reg(GPMC_IRQENABLE, regval);
+			break;
+		}
+
+	return 0;
+}
+
+static void gpmc_irq_disable(struct irq_data *p)
+{
+	gpmc_irq_endis(p->irq, false);
+}
+
+static void gpmc_irq_enable(struct irq_data *p)
+{
+	gpmc_irq_endis(p->irq, true);
+}
+
+static void gpmc_irq_noop(struct irq_data *data) { }
+
+static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
+
+static int gpmc_setup_irq(int gpmc_irq)
+{
+	int i;
+	u32 regval;
+
+	if (!gpmc_irq)
+		return -EINVAL;
+
+	gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
+	if (IS_ERR_VALUE(gpmc_irq_start)) {
+		pr_err("irq_alloc_descs failed\n");
+		return gpmc_irq_start;
+	}
+
+	gpmc_irq_chip.name = "gpmc";
+	gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
+	gpmc_irq_chip.irq_enable = gpmc_irq_enable;
+	gpmc_irq_chip.irq_disable = gpmc_irq_disable;
+	gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
+	gpmc_irq_chip.irq_ack = gpmc_irq_noop;
+	gpmc_irq_chip.irq_mask = gpmc_irq_noop;
+	gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
+
+	gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
+	gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++) {
+		gpmc_client_irq[i].irq = gpmc_irq_start + i;
+		irq_set_chip_and_handler(gpmc_client_irq[i].irq,
+					&gpmc_irq_chip, handle_simple_irq);
+		set_irq_flags(gpmc_client_irq[i].irq,
+				IRQF_VALID | IRQF_NOAUTOEN);
+	}
+
+	/* Disable interrupts */
+	gpmc_write_reg(GPMC_IRQENABLE, 0);
+
+	/* clear interrupts */
+	regval = gpmc_read_reg(GPMC_IRQSTATUS);
+	gpmc_write_reg(GPMC_IRQSTATUS, regval);
+
+	return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
+}
+
 static void __init gpmc_mem_init(void)
 {
 	int cs;
@ -711,8 +840,8 @@ static void __init gpmc_mem_init(void)

 static int __init gpmc_init(void)
 {
-	u32 l, irq;
-	int cs, ret = -EINVAL;
+	u32 l;
+	int ret = -EINVAL;
 	int gpmc_irq;
 	char *ck = NULL;

@ -722,16 +851,16 @@ static int __init gpmc_init(void)
 			l = OMAP2420_GPMC_BASE;
 		else
 			l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
+		gpmc_irq = 20 + OMAP_INTC_START;
 	} else if (cpu_is_omap34xx()) {
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
+		gpmc_irq = 20 + OMAP_INTC_START;
 	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
 		/* Base address and irq number are same for OMAP4/5 */
 		ck = "gpmc_ck";
 		l = OMAP44XX_GPMC_BASE;
-		gpmc_irq = OMAP44XX_IRQ_GPMC;
+		gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START;
 	}

 	if (WARN_ON(!ck))
@ -761,16 +890,7 @@ static int __init gpmc_init(void)
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
 	gpmc_mem_init();

-	/* initalize the irq_chained */
-	irq = OMAP_GPMC_IRQ_BASE;
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		irq_set_chip_and_handler(irq, &dummy_irq_chip,
-						handle_simple_irq);
-		set_irq_flags(irq, IRQF_VALID);
-		irq++;
-	}
-
-	ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
+	ret = gpmc_setup_irq(gpmc_irq);
 	if (ret)
 		pr_err("gpmc: irq-%d could not claim: err %d\n",
 						gpmc_irq, ret);
@ -780,12 +900,19 @@ postcore_initcall(gpmc_init);

 static irqreturn_t gpmc_handle_irq(int irq, void *dev)
 {
-	u8 cs;
+	int i;
+	u32 regval;

-	/* check cs to invoke the irq */
-	cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
-	if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
-		generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
+	regval = gpmc_read_reg(GPMC_IRQSTATUS);
+
+	if (!regval)
+		return IRQ_NONE;
+
+	for (i = 0; i < GPMC_NR_IRQ; i++)
+		if (regval & gpmc_client_irq[i].bitmask)
+			generic_handle_irq(gpmc_client_irq[i].irq);
+
+	gpmc_write_reg(GPMC_IRQSTATUS, regval);

 	return IRQ_HANDLED;
 }
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <mach/hardware.h>
+#include <linux/platform_data/gpio-omap.h>
+
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
 #include <plat/mux.h>
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@ -19,7 +19,6 @@
 *
 */

-#include <plat/cpu.h>
 #include <plat/i2c.h>
 #include "common.h"
 #include <plat/omap_hwmod.h>
--- a/Show More
+++ b/Show More