AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-24 14:41:02 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

gpio: sx150x: correct and refine reset-on-probe behavior

Browse Source 
Replace the arbitrary software-reset call from the device-probe
method, because:

- It is defective.  To work correctly, it should be two byte writes,
  not a single word write.  As it stands, it does nothing.

- Some devices with sx150x expanders installed have their NRESET pins
  ganged on the same line, so resetting one causes the others to reset -
  not a nice thing to do arbitrarily!

- The probe, usually taking place at boot, implies a recent hard-reset,
  so a software reset at this point is just a waste of energy anyway.

Therefore, make it optional, defaulting to off, as this will match the
common case of probing at powerup and also matches the current broken
no-op behavior.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Gregory Bean 2010-09-09 16:38:02 -07:00 committed by Linus Torvalds
parent 0dcc48c15f
commit 5affb60772
2 changed files with 25 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
drivers/gpio/sx150x.c
View File

@ -459,16 +459,32 @@ static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
return err;
}
static int sx150x_reset(struct sx150x_chip *chip)
{
int err;
err = i2c_smbus_write_byte_data(chip->client,
chip->dev_cfg->reg_reset,
0x12);
if (err < 0)
return err;
err = i2c_smbus_write_byte_data(chip->client,
chip->dev_cfg->reg_reset,
0x34);
return err;
}
static int sx150x_init_hw(struct sx150x_chip *chip,
struct sx150x_platform_data *pdata)
{
int err = 0;
err = i2c_smbus_write_word_data(chip->client,
chip->dev_cfg->reg_reset,
0x3412);
if (err < 0)
return err;
if (pdata->reset_during_probe) {
err = sx150x_reset(chip);
if (err < 0)
return err;
}
err = sx150x_i2c_write(chip->client,
chip->dev_cfg->reg_misc,

4
include/linux/i2c/sx150x.h
View File

@ -63,6 +63,9 @@
* IRQ lines will appear. Similarly to gpio_base, the expander
* will create a block of irqs beginning at this number.
* This value is ignored if irq_summary is < 0.
* @reset_during_probe: If set to true, the driver will trigger a full
* reset of the chip at the beginning of the probe
* in order to place it in a known state.
*/
struct sx150x_platform_data {
unsigned gpio_base;
@ -73,6 +76,7 @@ struct sx150x_platform_data {
u16 io_polarity;
int irq_summary;
unsigned irq_base;
bool reset_during_probe;
};
#endif /* __LINUX_I2C_SX150X_H */