ASoC: wm8903: replace codec to component

Now we can replace Codec to Component. Let's do it.

Note:
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 0	->	.idle_bias_on = 1
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Kuninori Morimoto 2018-01-29 03:05:11 +00:00 committed by Mark Brown
parent 7928b2cbe5
commit 58bd293492
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
3 changed files with 110 additions and 111 deletions

View File

@ -270,15 +270,15 @@ static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
static int wm8903_dcs_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
wm8903->dcs_pending |= 1 << w->shift;
break;
case SND_SOC_DAPM_PRE_PMD:
snd_soc_update_bits(codec, WM8903_DC_SERVO_0,
snd_soc_component_update_bits(component, WM8903_DC_SERVO_0,
1 << w->shift, 0);
break;
}
@ -289,17 +289,16 @@ static int wm8903_dcs_event(struct snd_soc_dapm_widget *w,
#define WM8903_DCS_MODE_WRITE_STOP 0
#define WM8903_DCS_MODE_START_STOP 2
static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
static void wm8903_seq_notifier(struct snd_soc_component *component,
enum snd_soc_dapm_type event, int subseq)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(dapm);
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int dcs_mode = WM8903_DCS_MODE_WRITE_STOP;
int i, val;
/* Complete any pending DC servo starts */
if (wm8903->dcs_pending) {
dev_dbg(codec->dev, "Starting DC servo for %x\n",
dev_dbg(component->dev, "Starting DC servo for %x\n",
wm8903->dcs_pending);
/* If we've no cached values then we need to do startup */
@ -308,14 +307,14 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
continue;
if (wm8903->dcs_cache[i]) {
dev_dbg(codec->dev,
dev_dbg(component->dev,
"Restore DC servo %d value %x\n",
3 - i, wm8903->dcs_cache[i]);
snd_soc_write(codec, WM8903_DC_SERVO_4 + i,
snd_soc_component_write(component, WM8903_DC_SERVO_4 + i,
wm8903->dcs_cache[i] & 0xff);
} else {
dev_dbg(codec->dev,
dev_dbg(component->dev,
"Calibrate DC servo %d\n", 3 - i);
dcs_mode = WM8903_DCS_MODE_START_STOP;
}
@ -325,10 +324,10 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
if (wm8903->class_w_users)
dcs_mode = WM8903_DCS_MODE_START_STOP;
snd_soc_update_bits(codec, WM8903_DC_SERVO_2,
snd_soc_component_update_bits(component, WM8903_DC_SERVO_2,
WM8903_DCS_MODE_MASK, dcs_mode);
snd_soc_update_bits(codec, WM8903_DC_SERVO_0,
snd_soc_component_update_bits(component, WM8903_DC_SERVO_0,
WM8903_DCS_ENA_MASK, wm8903->dcs_pending);
switch (dcs_mode) {
@ -346,9 +345,9 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
if (!(wm8903->dcs_pending & (1 << i)))
continue;
val = snd_soc_read(codec,
val = snd_soc_component_read32(component,
WM8903_DC_SERVO_READBACK_1 + i);
dev_dbg(codec->dev, "DC servo %d: %x\n",
dev_dbg(component->dev, "DC servo %d: %x\n",
3 - i, val);
wm8903->dcs_cache[i] = val;
}
@ -374,18 +373,18 @@ static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm,
static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_soc_dapm_kcontrol_codec(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
u16 reg;
int ret;
reg = snd_soc_read(codec, WM8903_CLASS_W_0);
reg = snd_soc_component_read32(component, WM8903_CLASS_W_0);
/* Turn it off if we're about to enable bypass */
if (ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 0) {
dev_dbg(codec->dev, "Disabling Class W\n");
snd_soc_write(codec, WM8903_CLASS_W_0, reg &
dev_dbg(component->dev, "Disabling Class W\n");
snd_soc_component_write(component, WM8903_CLASS_W_0, reg &
~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
}
wm8903->class_w_users++;
@ -397,14 +396,14 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
/* If we've just disabled the last bypass path turn Class W on */
if (!ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 1) {
dev_dbg(codec->dev, "Enabling Class W\n");
snd_soc_write(codec, WM8903_CLASS_W_0, reg |
dev_dbg(component->dev, "Enabling Class W\n");
snd_soc_component_write(component, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
wm8903->class_w_users--;
}
dev_dbg(codec->dev, "Bypass use count now %d\n",
dev_dbg(component->dev, "Bypass use count now %d\n",
wm8903->class_w_users);
return ret;
@ -417,9 +416,9 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
static int wm8903_deemph[] = { 0, 32000, 44100, 48000 };
static int wm8903_set_deemph(struct snd_soc_codec *codec)
static int wm8903_set_deemph(struct snd_soc_component *component)
{
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int val, i, best;
/* If we're using deemphasis select the nearest available sample
@ -439,18 +438,18 @@ static int wm8903_set_deemph(struct snd_soc_codec *codec)
val = 0;
}
dev_dbg(codec->dev, "Set deemphasis %d (%dHz)\n",
dev_dbg(component->dev, "Set deemphasis %d (%dHz)\n",
best, wm8903_deemph[best]);
return snd_soc_update_bits(codec, WM8903_DAC_DIGITAL_1,
return snd_soc_component_update_bits(component, WM8903_DAC_DIGITAL_1,
WM8903_DEEMPH_MASK, val);
}
static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = wm8903->deemph;
@ -460,8 +459,8 @@ static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
unsigned int deemph = ucontrol->value.integer.value[0];
int ret = 0;
@ -472,7 +471,7 @@ static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
if (wm8903->deemph != deemph) {
wm8903->deemph = deemph;
wm8903_set_deemph(codec);
wm8903_set_deemph(component);
ret = 1;
}
@ -1101,7 +1100,7 @@ static const struct snd_soc_dapm_route wm8903_intercon[] = {
{ "Right Line Output PGA", NULL, "Charge Pump" },
};
static int wm8903_set_bias_level(struct snd_soc_codec *codec,
static int wm8903_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
switch (level) {
@ -1109,14 +1108,14 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_PREPARE:
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_50K);
break;
case SND_SOC_BIAS_STANDBY:
if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_POBCTRL | WM8903_ISEL_MASK |
WM8903_STARTUP_BIAS_ENA |
WM8903_BIAS_ENA,
@ -1124,22 +1123,22 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
(2 << WM8903_ISEL_SHIFT) |
WM8903_STARTUP_BIAS_ENA);
snd_soc_update_bits(codec,
snd_soc_component_update_bits(component,
WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
WM8903_SPK_DISCHARGE,
WM8903_SPK_DISCHARGE);
msleep(33);
snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5,
snd_soc_component_update_bits(component, WM8903_POWER_MANAGEMENT_5,
WM8903_SPKL_ENA | WM8903_SPKR_ENA,
WM8903_SPKL_ENA | WM8903_SPKR_ENA);
snd_soc_update_bits(codec,
snd_soc_component_update_bits(component,
WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
WM8903_SPK_DISCHARGE, 0);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_TIE_ENA |
WM8903_BUFIO_ENA |
WM8903_VMID_IO_ENA |
@ -1155,57 +1154,57 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
msleep(129);
snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5,
snd_soc_component_update_bits(component, WM8903_POWER_MANAGEMENT_5,
WM8903_SPKL_ENA | WM8903_SPKR_ENA,
0);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_SOFT_MASK, 0);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_50K);
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_BIAS_ENA | WM8903_POBCTRL,
WM8903_BIAS_ENA);
/* By default no bypass paths are enabled so
* enable Class W support.
*/
dev_dbg(codec->dev, "Enabling Class W\n");
snd_soc_update_bits(codec, WM8903_CLASS_W_0,
dev_dbg(component->dev, "Enabling Class W\n");
snd_soc_component_update_bits(component, WM8903_CLASS_W_0,
WM8903_CP_DYN_FREQ |
WM8903_CP_DYN_V,
WM8903_CP_DYN_FREQ |
WM8903_CP_DYN_V);
}
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_250K);
break;
case SND_SOC_BIAS_OFF:
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_BIAS_ENA, 0);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_SOFT_MASK,
2 << WM8903_VMID_SOFT_SHIFT);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_BUF_ENA, 0);
msleep(290);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA |
WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK |
WM8903_VMID_SOFT_MASK |
WM8903_VMID_BUF_ENA, 0);
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_STARTUP_BIAS_ENA, 0);
break;
}
@ -1216,8 +1215,8 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_component *component = codec_dai->component;
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
wm8903->sysclk = freq;
@ -1227,8 +1226,8 @@ static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
struct snd_soc_component *component = codec_dai->component;
u16 aif1 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_1);
aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
@ -1306,24 +1305,24 @@ static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
return -EINVAL;
}
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_1, aif1);
return 0;
}
static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
struct snd_soc_codec *codec = codec_dai->codec;
struct snd_soc_component *component = codec_dai->component;
u16 reg;
reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
reg = snd_soc_component_read32(component, WM8903_DAC_DIGITAL_1);
if (mute)
reg |= WM8903_DAC_MUTE;
else
reg &= ~WM8903_DAC_MUTE;
snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg);
snd_soc_component_write(component, WM8903_DAC_DIGITAL_1, reg);
return 0;
}
@ -1443,8 +1442,8 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_component *component = dai->component;
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int fs = params_rate(params);
int bclk;
int bclk_div;
@ -1455,12 +1454,12 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
int cur_val;
int clk_sys;
u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2);
u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3);
u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0);
u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1);
u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
u16 aif1 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_1);
u16 aif2 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_2);
u16 aif3 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_3);
u16 clock0 = snd_soc_component_read32(component, WM8903_CLOCK_RATES_0);
u16 clock1 = snd_soc_component_read32(component, WM8903_CLOCK_RATES_1);
u16 dac_digital1 = snd_soc_component_read32(component, WM8903_DAC_DIGITAL_1);
/* Enable sloping stopband filter for low sample rates */
if (fs <= 24000)
@ -1479,7 +1478,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
}
}
dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
dev_dbg(component->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
clock1 &= ~WM8903_SAMPLE_RATE_MASK;
clock1 |= sample_rates[dsp_config].value;
@ -1505,7 +1504,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n",
dev_dbg(component->dev, "MCLK = %dHz, target sample rate = %dHz\n",
wm8903->sysclk, fs);
/* We may not have an MCLK which allows us to generate exactly
@ -1540,12 +1539,12 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
dev_dbg(component->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
clk_sys_ratios[clk_config].rate,
clk_sys_ratios[clk_config].mode,
clk_sys_ratios[clk_config].div);
dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
dev_dbg(component->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
/* We may not get quite the right frequency if using
* approximate clocks so look for the closest match that is
@ -1567,7 +1566,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
aif2 &= ~WM8903_BCLK_DIV_MASK;
aif3 &= ~WM8903_LRCLK_RATE_MASK;
dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
dev_dbg(component->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
bclk_divs[bclk_div].ratio / 10, bclk,
(clk_sys * 10) / bclk_divs[bclk_div].ratio);
@ -1575,14 +1574,14 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
aif3 |= bclk / fs;
wm8903->fs = params_rate(params);
wm8903_set_deemph(codec);
wm8903_set_deemph(component);
snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0);
snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1);
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1);
snd_soc_component_write(component, WM8903_CLOCK_RATES_0, clock0);
snd_soc_component_write(component, WM8903_CLOCK_RATES_1, clock1);
snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_1, aif1);
snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_2, aif2);
snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_3, aif3);
snd_soc_component_write(component, WM8903_DAC_DIGITAL_1, dac_digital1);
return 0;
}
@ -1590,7 +1589,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
/**
* wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
*
* @codec: WM8903 codec
* @component: WM8903 component
* @jack: jack to report detection events on
* @det: value to report for presence detection
* @shrt: value to report for short detection
@ -1604,13 +1603,13 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
* micdet_cfg in the platform data. Using this function will force on
* the microphone bias for the device.
*/
int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
int wm8903_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *jack,
int det, int shrt)
{
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT;
dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n",
dev_dbg(component->dev, "Enabling microphone detection: %x %x\n",
det, shrt);
/* Store the configuration */
@ -1624,19 +1623,19 @@ int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
if (shrt)
irq_mask &= ~WM8903_MICSHRT_EINT;
snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
snd_soc_component_update_bits(component, WM8903_INTERRUPT_STATUS_1_MASK,
WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
irq_mask);
if (det || shrt) {
/* Enable mic detection, this may not have been set through
* platform data (eg, if the defaults are OK). */
snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
snd_soc_component_update_bits(component, WM8903_WRITE_SEQUENCER_0,
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_MIC_BIAS_CONTROL_0,
WM8903_MICDET_ENA, WM8903_MICDET_ENA);
} else {
snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
snd_soc_component_update_bits(component, WM8903_MIC_BIAS_CONTROL_0,
WM8903_MICDET_ENA, 0);
}
@ -1766,9 +1765,9 @@ static struct snd_soc_dai_driver wm8903_dai = {
.symmetric_rates = 1,
};
static int wm8903_resume(struct snd_soc_codec *codec)
static int wm8903_resume(struct snd_soc_component *component)
{
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
regcache_sync(wm8903->regmap);
@ -1884,20 +1883,21 @@ static void wm8903_free_gpio(struct wm8903_priv *wm8903)
}
#endif
static const struct snd_soc_codec_driver soc_codec_dev_wm8903 = {
.resume = wm8903_resume,
.set_bias_level = wm8903_set_bias_level,
.seq_notifier = wm8903_seq_notifier,
.suspend_bias_off = true,
.component_driver = {
.controls = wm8903_snd_controls,
.num_controls = ARRAY_SIZE(wm8903_snd_controls),
.dapm_widgets = wm8903_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
.dapm_routes = wm8903_intercon,
.num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
},
static const struct snd_soc_component_driver soc_component_dev_wm8903 = {
.resume = wm8903_resume,
.set_bias_level = wm8903_set_bias_level,
.seq_notifier = wm8903_seq_notifier,
.controls = wm8903_snd_controls,
.num_controls = ARRAY_SIZE(wm8903_snd_controls),
.dapm_widgets = wm8903_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
.dapm_routes = wm8903_intercon,
.num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
.suspend_bias_off = 1,
.idle_bias_on = 1,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
};
static const struct regmap_config wm8903_regmap = {
@ -2176,8 +2176,8 @@ static int wm8903_i2c_probe(struct i2c_client *i2c,
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE,
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE);
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8903, &wm8903_dai, 1);
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8903, &wm8903_dai, 1);
if (ret != 0)
goto err;
@ -2197,7 +2197,6 @@ static int wm8903_i2c_remove(struct i2c_client *client)
if (client->irq)
free_irq(client->irq, wm8903);
wm8903_free_gpio(wm8903);
snd_soc_unregister_codec(&client->dev);
return 0;
}

View File

@ -15,7 +15,7 @@
#include <linux/i2c.h>
extern int wm8903_mic_detect(struct snd_soc_codec *codec,
extern int wm8903_mic_detect(struct snd_soc_component *component,
struct snd_soc_jack *jack,
int det, int shrt);

View File

@ -170,7 +170,7 @@ static const struct snd_kcontrol_new tegra_wm8903_controls[] = {
static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_codec *codec = codec_dai->codec;
struct snd_soc_component *component = codec_dai->component;
struct snd_soc_card *card = rtd->card;
struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
@ -189,7 +189,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
&tegra_wm8903_mic_jack,
tegra_wm8903_mic_jack_pins,
ARRAY_SIZE(tegra_wm8903_mic_jack_pins));
wm8903_mic_detect(codec, &tegra_wm8903_mic_jack, SND_JACK_MICROPHONE,
wm8903_mic_detect(component, &tegra_wm8903_mic_jack, SND_JACK_MICROPHONE,
0);
snd_soc_dapm_force_enable_pin(&card->dapm, "MICBIAS");
@ -202,9 +202,9 @@ static int tegra_wm8903_remove(struct snd_soc_card *card)
struct snd_soc_pcm_runtime *rtd =
snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_codec *codec = codec_dai->codec;
struct snd_soc_component *component = codec_dai->component;
wm8903_mic_detect(codec, NULL, 0, 0);
wm8903_mic_detect(component, NULL, 0, 0);
return 0;
}