diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066 index 2bc5ba6aee66..c1b57d72efc3 100644 --- a/Documentation/hwmon/lm25066 +++ b/Documentation/hwmon/lm25066 @@ -1,7 +1,13 @@ -Kernel driver max8688 +Kernel driver lm25066 ===================== Supported chips: + * TI LM25056 + Prefix: 'lm25056' + Addresses scanned: - + Datasheets: + http://www.ti.com/lit/gpn/lm25056 + http://www.ti.com/lit/gpn/lm25056a * National Semiconductor LM25066 Prefix: 'lm25066' Addresses scanned: - @@ -25,8 +31,9 @@ Author: Guenter Roeck Description ----------- -This driver supports hardware montoring for National Semiconductor LM25066, -LM5064, and LM5064 Power Management, Monitoring, Control, and Protection ICs. +This driver supports hardware montoring for National Semiconductor / TI LM25056, +LM25066, LM5064, and LM5064 Power Management, Monitoring, Control, and +Protection ICs. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. @@ -62,8 +69,13 @@ in1_max_alarm Input voltage high alarm. in2_label "vmon" in2_input Measured voltage on VAUX pin +in2_min Minimum VAUX voltage (LM25056 only). +in2_max Maximum VAUX voltage (LM25056 only). +in2_min_alarm VAUX voltage low alarm (LM25056 only). +in2_max_alarm VAUX voltage high alarm (LM25056 only). in3_label "vout1" + Not supported on LM25056. in3_input Measured output voltage. in3_average Average measured output voltage. in3_min Minimum output voltage. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index b1adad60d6ad..39cc63edfbb0 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -42,7 +42,7 @@ config SENSORS_LM25066 default n help If you say yes here you get hardware monitoring support for National - Semiconductor LM25066, LM5064, and LM5066. + Semiconductor LM25056, LM25066, LM5064, and LM5066. This driver can also be built as a module. If so, the module will be called lm25066. diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c index 08267149dc63..6a9d6edaacb3 100644 --- a/drivers/hwmon/pmbus/lm25066.c +++ b/drivers/hwmon/pmbus/lm25066.c @@ -1,5 +1,5 @@ /* - * Hardware monitoring driver for LM25066 / LM5064 / LM5066 + * Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066 * * Copyright (c) 2011 Ericsson AB. * Copyright (c) 2013 Guenter Roeck @@ -27,7 +27,7 @@ #include #include "pmbus.h" -enum chips { lm25066, lm5064, lm5066 }; +enum chips { lm25056, lm25066, lm5064, lm5066 }; #define LM25066_READ_VAUX 0xd0 #define LM25066_MFR_READ_IIN 0xd1 @@ -44,6 +44,14 @@ enum chips { lm25066, lm5064, lm5066 }; #define LM25066_DEV_SETUP_CL (1 << 4) /* Current limit */ +/* LM25056 only */ + +#define LM25056_VAUX_OV_WARN_LIMIT 0xe3 +#define LM25056_VAUX_UV_WARN_LIMIT 0xe4 + +#define LM25056_MFR_STS_VAUX_OV_WARN (1 << 1) +#define LM25056_MFR_STS_VAUX_UV_WARN (1 << 0) + struct __coeff { short m, b, R; }; @@ -51,7 +59,34 @@ struct __coeff { #define PSC_CURRENT_IN_L (PSC_NUM_CLASSES) #define PSC_POWER_L (PSC_NUM_CLASSES + 1) -static struct __coeff lm25066_coeff[3][PSC_NUM_CLASSES + 2] = { +static struct __coeff lm25066_coeff[4][PSC_NUM_CLASSES + 2] = { + [lm25056] = { + [PSC_VOLTAGE_IN] = { + .m = 16296, + .R = -2, + }, + [PSC_CURRENT_IN] = { + .m = 13797, + .R = -2, + }, + [PSC_CURRENT_IN_L] = { + .m = 6726, + .R = -2, + }, + [PSC_POWER] = { + .m = 5501, + .R = -3, + }, + [PSC_POWER_L] = { + .m = 26882, + .R = -4, + }, + [PSC_TEMPERATURE] = { + .m = 1580, + .b = -14500, + .R = -2, + }, + }, [lm25066] = { [PSC_VOLTAGE_IN] = { .m = 22070, @@ -161,6 +196,10 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg) break; /* Adjust returned value to match VIN coefficients */ switch (data->id) { + case lm25056: + /* VIN: 6.14 mV VAUX: 293 uV LSB */ + ret = DIV_ROUND_CLOSEST(ret * 293, 6140); + break; case lm25066: /* VIN: 4.54 mV VAUX: 283.2 uV LSB */ ret = DIV_ROUND_CLOSEST(ret * 2832, 45400); @@ -214,6 +253,58 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg) return ret; } +static int lm25056_read_word_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VIRT_VMON_UV_WARN_LIMIT: + ret = pmbus_read_word_data(client, 0, + LM25056_VAUX_UV_WARN_LIMIT); + if (ret < 0) + break; + /* Adjust returned value to match VIN coefficients */ + ret = DIV_ROUND_CLOSEST(ret * 293, 6140); + break; + case PMBUS_VIRT_VMON_OV_WARN_LIMIT: + ret = pmbus_read_word_data(client, 0, + LM25056_VAUX_OV_WARN_LIMIT); + if (ret < 0) + break; + /* Adjust returned value to match VIN coefficients */ + ret = DIV_ROUND_CLOSEST(ret * 293, 6140); + break; + default: + ret = lm25066_read_word_data(client, page, reg); + break; + } + return ret; +} + +static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret, s; + + switch (reg) { + case PMBUS_VIRT_STATUS_VMON: + ret = pmbus_read_byte_data(client, 0, + PMBUS_STATUS_MFR_SPECIFIC); + if (ret < 0) + break; + s = 0; + if (ret & LM25056_MFR_STS_VAUX_UV_WARN) + s |= PB_VOLTAGE_UV_WARNING; + if (ret & LM25056_MFR_STS_VAUX_OV_WARN) + s |= PB_VOLTAGE_OV_WARNING; + ret = s; + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + static int lm25066_write_word_data(struct i2c_client *client, int page, int reg, u16 word) { @@ -243,6 +334,22 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg, word); pmbus_clear_cache(client); break; + case PMBUS_VIRT_VMON_UV_WARN_LIMIT: + /* Adjust from VIN coefficients (for LM25056) */ + word = DIV_ROUND_CLOSEST((int)word * 6140, 293); + word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff); + ret = pmbus_write_word_data(client, 0, + LM25056_VAUX_UV_WARN_LIMIT, word); + pmbus_clear_cache(client); + break; + case PMBUS_VIRT_VMON_OV_WARN_LIMIT: + /* Adjust from VIN coefficients (for LM25056) */ + word = DIV_ROUND_CLOSEST((int)word * 6140, 293); + word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff); + ret = pmbus_write_word_data(client, 0, + LM25056_VAUX_OV_WARN_LIMIT, word); + pmbus_clear_cache(client); + break; case PMBUS_VIRT_RESET_PIN_HISTORY: ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK); break; @@ -284,12 +391,18 @@ static int lm25066_probe(struct i2c_client *client, info->format[PSC_TEMPERATURE] = direct; info->format[PSC_POWER] = direct; + info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON + | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; - info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON | PMBUS_HAVE_VOUT - | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN - | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; - - info->read_word_data = lm25066_read_word_data; + if (data->id == lm25056) { + info->func[0] |= PMBUS_HAVE_STATUS_VMON; + info->read_word_data = lm25056_read_word_data; + info->read_byte_data = lm25056_read_byte_data; + } else { + info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + info->read_word_data = lm25066_read_word_data; + } info->write_word_data = lm25066_write_word_data; coeff = &lm25066_coeff[data->id][0]; @@ -318,6 +431,7 @@ static int lm25066_probe(struct i2c_client *client, } static const struct i2c_device_id lm25066_id[] = { + {"lm25056", lm25056}, {"lm25066", lm25066}, {"lm5064", lm5064}, {"lm5066", lm5066}, @@ -339,5 +453,5 @@ static struct i2c_driver lm25066_driver = { module_i2c_driver(lm25066_driver); MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for LM25066/LM5064/LM5066"); +MODULE_DESCRIPTION("PMBus driver for LM25056/LM25066/LM5064/LM5066"); MODULE_LICENSE("GPL");