From 57b3006492a4c11b2d4a772b5b2905d544a32037 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 22 Aug 2019 11:32:00 +0300 Subject: [PATCH] ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint My assumption in commit b53548f9d9e4 ("spi: pxa2xx: Remove LPSS private register restoring during resume") that Intel Lynxpoint and compatible based chipsets may not need LPSS private registers saving and restoring over suspend/resume cycle turned out to be false on Intel Broadwell. Curtis Malainey sent a patch bringing above change back and reported the LPSS SPI Chip Select control was lost over suspend/resume cycle on Broadwell machine. Instead of reverting above commit lets add LPSS private register saving/restoring also for all LPSS SPI, I2C and UART controllers on Lynxpoint and compatible chipset to make sure context is not lost in case nothing else preserves it like firmware or if LPSS is always on. Fixes: b53548f9d9e4 ("spi: pxa2xx: Remove LPSS private register restoring during resume") Reported-by: Curtis Malainey Tested-by: Curtis Malainey Cc: 5.0+ # 5.0+ Signed-off-by: Jarkko Nikula Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_lpss.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index d696f165a50e..60bbc5090abe 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -219,12 +219,13 @@ static void bsw_pwm_setup(struct lpss_private_data *pdata) } static const struct lpss_device_desc lpt_dev_desc = { - .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, + .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR + | LPSS_SAVE_CTX, .prv_offset = 0x800, }; static const struct lpss_device_desc lpt_i2c_dev_desc = { - .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR, + .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR | LPSS_SAVE_CTX, .prv_offset = 0x800, }; @@ -236,7 +237,8 @@ static struct property_entry uart_properties[] = { }; static const struct lpss_device_desc lpt_uart_dev_desc = { - .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, + .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR + | LPSS_SAVE_CTX, .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup,