AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-29 22:56:47 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

m68knommu: move UART addressing to part specific includes

Browse Source 
The ColdFire UART base addresses varies between the different ColdFire
family members. Instead of keeping the base addresses with the UART
definitions keep them with the other addresses definitions for each
ColdFire part.

The motivation for this move is so that when we add new ColdFire
part definitions, they are all in a single file (and we shouldn't
normally need to modify the UART definitions in mcfuart.h at all).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
This commit is contained in:
Greg Ungerer 2010-11-03 12:50:30 +10:00
parent 733f31b764
commit 57015421d3
12 changed files with 74 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
arch/m68k/include/asm/m5206sim.h
View File

@ -90,6 +90,14 @@
#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
#if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x140 /* Base address of UART1 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */
#endif
/*
* Define system peripheral IRQ usage.
*/
@ -97,7 +105,7 @@
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/*
* Generic GPIO
* Generic GPIO
*/
#define MCFGPIO_PIN_MAX 8
#define MCFGPIO_IRQ_VECBASE -1

9
arch/m68k/include/asm/m520xsim.h
View File

@ -100,6 +100,7 @@
#define MCFGPIO_PCLRR_UART 0xFC0A402A
#define MCFGPIO_PCLRR_FECH 0xFC0A402B
#define MCFGPIO_PCLRR_FECL 0xFC0A402C
/*
* Generic GPIO support
*/
@ -112,7 +113,6 @@
#define MCFGPIO_PIN_MAX 80
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
/****************************************************************************/
#define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033)
@ -128,6 +128,13 @@
#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
/*
* UART module.
*/
#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
/*
* Reset Controll Unit.
*/

7
arch/m68k/include/asm/m523xsim.h
View File

@ -52,6 +52,13 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
/*
* UART module.
*/
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)

5
arch/m68k/include/asm/m5249sim.h
View File

@ -59,6 +59,11 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
/*
* UART module.
*/
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
/*
* Some symbol defines for the above...

3
arch/m68k/include/asm/m5272sim.h
View File

@ -65,6 +65,9 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
#define MCFUART_BASE1 0x100 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */

6
arch/m68k/include/asm/m527xsim.h
View File

@ -58,6 +58,12 @@
#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
#endif
/*
* UART module.
*/
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)

7
arch/m68k/include/asm/m528xsim.h
View File

@ -43,6 +43,13 @@
#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
/*
* UART module.
*/
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
/*
* GPIO registers
*/

11
arch/m68k/include/asm/m5307sim.h
View File

@ -96,6 +96,17 @@
#define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248)
/*
* UART module.
*/
#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#endif
/*
* Generic GPIO support
*/

7
arch/m68k/include/asm/m532xsim.h
View File

@ -103,6 +103,13 @@
#define ACR_CM_OFF_IMP (3<<5)
#define ACR_WPROTECT (1<<2)
/*
* UART module.
*/
#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */
#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */
/*********************************************************************
*
* Reset Controller Module

3
arch/m68k/include/asm/m5407sim.h
View File

@ -76,6 +76,9 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248)

8
arch/m68k/include/asm/m54xxsim.h
View File

@ -24,6 +24,14 @@
#define MCFINTC_IACKL 0x19 /* */
#define MCFINTC_ICR0 0x40 /* Base ICR register */
/*
* UART module.
*/
#define MCFUART_BASE1 0x8600 /* Base address of UART1 */
#define MCFUART_BASE2 0x8700 /* Base address of UART2 */
#define MCFUART_BASE3 0x8800 /* Base address of UART3 */
#define MCFUART_BASE4 0x8900 /* Base address of UART4 */
/*
* Define system peripheral IRQ usage.
*/

43
arch/m68k/include/asm/mcfuart.h
View File

@ -12,49 +12,6 @@
#define mcfuart_h
/****************************************************************************/
/*
* Define the base address of the UARTS within the MBAR address
* space.
*/
#if defined(CONFIG_M5272)
#define MCFUART_BASE1 0x100 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x140 /* Base address of UART1 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */
#endif
#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
#else
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#endif
#elif defined(CONFIG_M520x)
#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
#elif defined(CONFIG_M532x)
#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
#elif defined(CONFIG_M54xx)
#define MCFUART_BASE1 0x8600 /* on M54xx */
#define MCFUART_BASE2 0x8700 /* on M54xx */
#define MCFUART_BASE3 0x8800 /* on M54xx */
#define MCFUART_BASE4 0x8900 /* on M54xx */
#endif
#include <linux/serial_core.h>
#include <linux/platform_device.h>