AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-24 14:41:02 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge branch 'for-4.4/core' into for-4.4/drivers

Browse Source 
Signed-off-by: Jens Axboe <axboe@fb.com>
This commit is contained in:
Jens Axboe 2015-10-09 10:40:29 -06:00
commit 54ef2b9687
690 changed files with 7240 additions and 3954 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/Changes
View File

@ -43,7 +43,7 @@ o udev 081 # udevd --version
o grub 0.93 # grub --version || grub-install --version
o mcelog 0.6 # mcelog --version
o iptables 1.4.2 # iptables -V
o openssl & libcrypto 1.0.1k # openssl version
o openssl & libcrypto 1.0.0 # openssl version
Kernel compilation

5
Documentation/devicetree/bindings/arm/gic-v3.txt
View File

@ -57,6 +57,8 @@ used to route Message Signalled Interrupts (MSI) to the CPUs.
These nodes must have the following properties:
- compatible : Should at least contain "arm,gic-v3-its".
- msi-controller : Boolean property. Identifies the node as an MSI controller
- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device
which will generate the MSI.
- reg: Specifies the base physical address and size of the ITS
registers.
@ -83,6 +85,7 @@ Examples:
gic-its@2c200000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x0 0x2c200000 0 0x200000>;
};
};
@ -107,12 +110,14 @@ Examples:
gic-its@2c200000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x0 0x2c200000 0 0x200000>;
};
gic-its@2c400000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x0 0x2c400000 0 0x200000>;
};
};

2
Documentation/devicetree/bindings/arm/idle-states.txt
View File

@ -497,7 +497,7 @@ cpus {
};
idle-states {
entry-method = "arm,psci";
entry-method = "psci";
CPU_RETENTION_0_0: cpu-retention-0-0 {
compatible = "arm,idle-state";

4
Documentation/devicetree/bindings/gpio/gpio.txt
View File

@ -16,7 +16,9 @@ properties, each containing a 'gpio-list':
GPIO properties should be named "[<name>-]gpios", with <name> being the purpose
of this GPIO for the device. While a non-existent <name> is considered valid
for compatibility reasons (resolving to the "gpios" property), it is not allowed
for new bindings.
for new bindings. Also, GPIO properties named "[<name>-]gpio" are valid and old
bindings use it, but are only supported for compatibility reasons and should not
be used for newer bindings since it has been deprecated.
GPIO properties can contain one or more GPIO phandles, but only in exceptional
cases should they contain more than one. If your device uses several GPIOs with

8
Documentation/devicetree/bindings/iio/accel/bma180.txt
View File

@ -1,10 +1,11 @@
* Bosch BMA180 triaxial acceleration sensor
* Bosch BMA180 / BMA250 triaxial acceleration sensor
http://omapworld.com/BMA180_111_1002839.pdf
http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
Required properties:
- compatible : should be "bosch,bma180"
- compatible : should be "bosch,bma180" or "bosch,bma250"
- reg : the I2C address of the sensor
Optional properties:
@ -13,6 +14,9 @@ Optional properties:
- interrupts : interrupt mapping for GPIO IRQ, it should by configured with
flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
For the bma250 the first interrupt listed must be the one
connected to the INT1 pin, the second (optional) interrupt
listed must be the one connected to the INT2 pin.
Example:

2
Documentation/devicetree/bindings/input/cypress,cyapa.txt
View File

@ -25,7 +25,7 @@ Example:
/* Cypress Gen3 touchpad */
touchpad@67 {
compatible = "cypress,cyapa";
reg = <0x24>;
reg = <0x67>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;

20
Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
View File

@ -4,8 +4,8 @@ The MISC interrupt controller is a secondary controller for lower priority
interrupt.
Required Properties:
- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
as fallback
- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
"qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
- reg: Base address and size of the controllers memory area
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
@ -13,6 +13,9 @@ Required Properties:
- #interrupt-cells : Specifies the number of cells needed to encode interrupt
source, should be 1
Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
use ar7240 for all other SoCs.
Please refer to interrupts.txt in this directory for details of the common
Interrupt Controllers bindings used by client devices.
@ -28,3 +31,16 @@ Example:
interrupt-controller;
#interrupt-cells = <1>;
};
Another example:
interrupt-controller@18060010 {
compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
reg = <0x18060010 0x4>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
interrupt-controller;
#interrupt-cells = <1>;
};

3
Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
View File

@ -7,7 +7,8 @@ OHCI and EHCI controllers.
Required properties:
- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
"renesas,pci-r8a7791" for the R8A7791 SoC.
"renesas,pci-r8a7791" for the R8A7791 SoC;
"renesas,pci-r8a7794" for the R8A7794 SoC.
- reg: A list of physical regions to access the device: the first is
the operational registers for the OHCI/EHCI controllers and the
second is for the bridge configuration and control registers.

7
Documentation/devicetree/bindings/regulator/pbias-regulator.txt
View File

@ -2,7 +2,12 @@ PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
Required properties:
- compatible:
- "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
- should be "ti,pbias-dra7" for DRA7
- should be "ti,pbias-omap2" for OMAP2
- should be "ti,pbias-omap3" for OMAP3
- should be "ti,pbias-omap4" for OMAP4
- should be "ti,pbias-omap5" for OMAP5
- "ti,pbias-omap" is deprecated
- reg: pbias register offset from syscon base and size of pbias register.
- syscon : phandle of the system control module
- regulator-name : should be

16
Documentation/devicetree/bindings/spi/spi-mt65xx.txt
View File

@ -15,17 +15,18 @@ Required properties:
- interrupts: Should contain spi interrupt
- clocks: phandles to input clocks.
The first should be <&topckgen CLK_TOP_SPI_SEL>.
The second should be one of the following.
The first should be one of the following. It's PLL.
- <&clk26m>: specify parent clock 26MHZ.
- <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
It's the default one.
- <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
- <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
- <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux.
The third is <&pericfg CLK_PERI_SPI0>. It's clock gate.
- clock-names: shall be "spi-clk" for the controller clock, and
"parent-clk" for the parent clock.
- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the
muxes clock, and "spi-clk" for the clock gate.
Optional properties:
- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
@ -44,8 +45,11 @@ spi: spi@1100a000 {
#size-cells = <0>;
reg = <0 0x1100a000 0 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_SPI_SEL>, <&topckgen CLK_TOP_SYSPLL3_D2>;
clock-names = "spi-clk", "parent-clk";
clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
<&topckgen CLK_TOP_SPI_SEL>,
<&pericfg CLK_PERI_SPI0>;
clock-names = "parent-clk", "sel-clk", "spi-clk";
mediatek,pad-select = <0>;
status = "disabled";
};

27
Documentation/devicetree/bindings/thermal/thermal.txt
View File

@ -55,19 +55,11 @@ of heat dissipation). For example a fan's cooling states correspond to
the different fan speeds possible. Cooling states are referred to by
single unsigned integers, where larger numbers mean greater heat
dissipation. The precise set of cooling states associated with a device
(as referred to be the cooling-min-state and cooling-max-state
(as referred to by the cooling-min-level and cooling-max-level
properties) should be defined in a particular device's binding.
For more examples of cooling devices, refer to the example sections below.
Required properties:
- cooling-min-state: An integer indicating the smallest
Type: unsigned cooling state accepted. Typically 0.
Size: one cell
- cooling-max-state: An integer indicating the largest
Type: unsigned cooling state accepted.
Size: one cell
- #cooling-cells: Used to provide cooling device specific information
Type: unsigned while referring to it. Must be at least 2, in order
Size: one cell to specify minimum and maximum cooling state used
@ -77,6 +69,15 @@ Required properties:
See Cooling device maps section below for more details
on how consumers refer to cooling devices.
Optional properties:
- cooling-min-level: An integer indicating the smallest
Type: unsigned cooling state accepted. Typically 0.
Size: one cell
- cooling-max-level: An integer indicating the largest
Type: unsigned cooling state accepted.
Size: one cell
* Trip points
The trip node is a node to describe a point in the temperature domain
@ -225,8 +226,8 @@ cpus {
396000 950000
198000 850000
>;
cooling-min-state = <0>;
cooling-max-state = <3>;
cooling-min-level = <0>;
cooling-max-level = <3>;
#cooling-cells = <2>; /* min followed by max */
};
...
@ -240,8 +241,8 @@ cpus {
*/
fan0: fan@0x48 {
...
cooling-min-state = <0>;
cooling-max-state = <9>;
cooling-min-level = <0>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
};

1
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
View File

@ -6,6 +6,7 @@ Required properties:
"lsi,zevio-usb"
"qcom,ci-hdrc"
"chipidea,usb2"
"xlnx,zynq-usb-2.20a"
- reg: base address and length of the registers
- interrupts: interrupt for the USB controller

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -203,6 +203,7 @@ sitronix Sitronix Technology Corporation
skyworks Skyworks Solutions, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
socionext Socionext Inc.
solidrun SolidRun
solomon Solomon Systech Limited
sony Sony Corporation

2
Documentation/input/multi-touch-protocol.txt
View File

@ -361,7 +361,7 @@ For win8 devices with both T and C coordinates, the position mapping is
ABS_MT_POSITION_X := T_X
ABS_MT_POSITION_Y := T_Y
ABS_MT_TOOL_X := C_X
ABS_MT_TOOL_X := C_Y
ABS_MT_TOOL_Y := C_Y
Unfortunately, there is not enough information to specify both the touching
ellipse and the tool ellipse, so one has to resort to approximations. One

96
Documentation/networking/vrf.txt Normal file
View File

@ -0,0 +1,96 @@
Virtual Routing and Forwarding (VRF)
====================================
The VRF device combined with ip rules provides the ability to create virtual
routing and forwarding domains (aka VRFs, VRF-lite to be specific) in the
Linux network stack. One use case is the multi-tenancy problem where each
tenant has their own unique routing tables and in the very least need
different default gateways.
Processes can be "VRF aware" by binding a socket to the VRF device. Packets
through the socket then use the routing table associated with the VRF
device. An important feature of the VRF device implementation is that it
impacts only Layer 3 and above so L2 tools (e.g., LLDP) are not affected
(ie., they do not need to be run in each VRF). The design also allows
the use of higher priority ip rules (Policy Based Routing, PBR) to take
precedence over the VRF device rules directing specific traffic as desired.
In addition, VRF devices allow VRFs to be nested within namespaces. For
example network namespaces provide separation of network interfaces at L1
(Layer 1 separation), VLANs on the interfaces within a namespace provide
L2 separation and then VRF devices provide L3 separation.
Design
------
A VRF device is created with an associated route table. Network interfaces
are then enslaved to a VRF device:
+-----------------------------+
| vrf-blue | ===> route table 10
+-----------------------------+
| | |
+------+ +------+ +-------------+
| eth1 | | eth2 | ... | bond1 |
+------+ +------+ +-------------+
| |
+------+ +------+
| eth8 | | eth9 |
+------+ +------+
Packets received on an enslaved device and are switched to the VRF device
using an rx_handler which gives the impression that packets flow through
the VRF device. Similarly on egress routing rules are used to send packets
to the VRF device driver before getting sent out the actual interface. This
allows tcpdump on a VRF device to capture all packets into and out of the
VRF as a whole.[1] Similiarly, netfilter [2] and tc rules can be applied
using the VRF device to specify rules that apply to the VRF domain as a whole.
[1] Packets in the forwarded state do not flow through the device, so those
packets are not seen by tcpdump. Will revisit this limitation in a
future release.
[2] Iptables on ingress is limited to NF_INET_PRE_ROUTING only with skb->dev
set to real ingress device and egress is limited to NF_INET_POST_ROUTING.
Will revisit this limitation in a future release.
Setup
-----
1. VRF device is created with an association to a FIB table.
e.g, ip link add vrf-blue type vrf table 10
ip link set dev vrf-blue up
2. Rules are added that send lookups to the associated FIB table when the
iif or oif is the VRF device. e.g.,
ip ru add oif vrf-blue table 10
ip ru add iif vrf-blue table 10
Set the default route for the table (and hence default route for the VRF).
e.g, ip route add table 10 prohibit default
3. Enslave L3 interfaces to a VRF device.
e.g, ip link set dev eth1 master vrf-blue
Local and connected routes for enslaved devices are automatically moved to
the table associated with VRF device. Any additional routes depending on
the enslaved device will need to be reinserted following the enslavement.
4. Additional VRF routes are added to associated table.
e.g., ip route add table 10 ...
Applications
------------
Applications that are to work within a VRF need to bind their socket to the
VRF device:
setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, dev, strlen(dev)+1);
or to specify the output device using cmsg and IP_PKTINFO.
Limitations
-----------
VRF device currently only works for IPv4. Support for IPv6 is under development.
Index of original ingress interface is not available via cmsg. Will address
soon.

51
Documentation/power/pci.txt
View File

@ -979,20 +979,45 @@ every time right after the runtime_resume() callback has returned
(alternatively, the runtime_suspend() callback will have to check if the
device should really be suspended and return -EAGAIN if that is not the case).
The runtime PM of PCI devices is disabled by default. It is also blocked by
pci_pm_init() that runs the pm_runtime_forbid() helper function. If a PCI
driver implements the runtime PM callbacks and intends to use the runtime PM
framework provided by the PM core and the PCI subsystem, it should enable this
feature by executing the pm_runtime_enable() helper function. However, the
driver should not call the pm_runtime_allow() helper function unblocking
the runtime PM of the device. Instead, it should allow user space or some
platform-specific code to do that (user space can do it via sysfs), although
once it has called pm_runtime_enable(), it must be prepared to handle the
The runtime PM of PCI devices is enabled by default by the PCI core. PCI
device drivers do not need to enable it and should not attempt to do so.
However, it is blocked by pci_pm_init() that runs the pm_runtime_forbid()
helper function. In addition to that, the runtime PM usage counter of
each PCI device is incremented by local_pci_probe() before executing the
probe callback provided by the device's driver.
If a PCI driver implements the runtime PM callbacks and intends to use the
runtime PM framework provided by the PM core and the PCI subsystem, it needs
to decrement the device's runtime PM usage counter in its probe callback
function. If it doesn't do that, the counter will always be different from
zero for the device and it will never be runtime-suspended. The simplest
way to do that is by calling pm_runtime_put_noidle(), but if the driver
wants to schedule an autosuspend right away, for example, it may call
pm_runtime_put_autosuspend() instead for this purpose. Generally, it
just needs to call a function that decrements the devices usage counter
from its probe routine to make runtime PM work for the device.
It is important to remember that the driver's runtime_suspend() callback
may be executed right after the usage counter has been decremented, because
user space may already have cuased the pm_runtime_allow() helper function
unblocking the runtime PM of the device to run via sysfs, so the driver must
be prepared to cope with that.
The driver itself should not call pm_runtime_allow(), though. Instead, it
should let user space or some platform-specific code do that (user space can
do it via sysfs as stated above), but it must be prepared to handle the
runtime PM of the device correctly as soon as pm_runtime_allow() is called
(which may happen at any time). [It also is possible that user space causes
pm_runtime_allow() to be called via sysfs before the driver is loaded, so in
fact the driver has to be prepared to handle the runtime PM of the device as
soon as it calls pm_runtime_enable().]
(which may happen at any time, even before the driver is loaded).
When the driver's remove callback runs, it has to balance the decrementation
of the device's runtime PM usage counter at the probe time. For this reason,
if it has decremented the counter in its probe callback, it must run
pm_runtime_get_noresume() in its remove callback. [Since the core carries
out a runtime resume of the device and bumps up the device's usage counter
before running the driver's remove callback, the runtime PM of the device
is effectively disabled for the duration of the remove execution and all
runtime PM helper functions incrementing the device's usage counter are
then effectively equivalent to pm_runtime_get_noresume().]
The runtime PM framework works by processing requests to suspend or resume
devices, or to check if they are idle (in which cases it is reasonable to

1
Documentation/ptp/testptp.c
View File

@ -18,6 +18,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define _GNU_SOURCE
#define __SANE_USERSPACE_TYPES__ /* For PPC64, to get LL64 types */
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>

16
Documentation/sysctl/net.txt
View File

@ -54,13 +54,15 @@ default_qdisc
--------------
The default queuing discipline to use for network devices. This allows
overriding the default queue discipline of pfifo_fast with an
alternative. Since the default queuing discipline is created with the
no additional parameters so is best suited to queuing disciplines that
work well without configuration like stochastic fair queue (sfq),
CoDel (codel) or fair queue CoDel (fq_codel). Don't use queuing disciplines
like Hierarchical Token Bucket or Deficit Round Robin which require setting
up classes and bandwidths.
overriding the default of pfifo_fast with an alternative. Since the default
queuing discipline is created without additional parameters so is best suited
to queuing disciplines that work well without configuration like stochastic
fair queue (sfq), CoDel (codel) or fair queue CoDel (fq_codel). Don't use
queuing disciplines like Hierarchical Token Bucket or Deficit Round Robin
which require setting up classes and bandwidths. Note that physical multiqueue
interfaces still use mq as root qdisc, which in turn uses this default for its
leaves. Virtual devices (like e.g. lo or veth) ignore this setting and instead
default to noqueue.
Default: pfifo_fast
busy_read

2
Documentation/thermal/power_allocator.txt
View File

@ -4,7 +4,7 @@ Power allocator governor tunables
Trip points
-----------
The governor requires the following two passive trip points:
The governor works optimally with the following two passive trip points:
1. "switch on" trip point: temperature above which the governor
control loop starts operating. This is the first passive trip

42
MAINTAINERS
View File

@ -615,9 +615,8 @@ F: Documentation/hwmon/fam15h_power
F: drivers/hwmon/fam15h_power.c
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
M: Thomas Dahlmann <dahlmann.thomas@arcor.de>
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Orphan
F: drivers/usb/gadget/udc/amd5536udc.*
AMD GEODE PROCESSOR/CHIPSET SUPPORT
@ -808,6 +807,13 @@ S: Maintained
F: drivers/video/fbdev/arcfb.c
F: drivers/video/fbdev/core/fb_defio.c
ARCNET NETWORK LAYER
M: Michael Grzeschik <m.grzeschik@pengutronix.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/arcnet/
F: include/uapi/linux/if_arcnet.h
ARM MFM AND FLOPPY DRIVERS
M: Ian Molton <spyro@f2s.com>
S: Maintained
@ -3394,7 +3400,6 @@ F: drivers/staging/dgnc/
DIGI EPCA PCI PRODUCTS
M: Lidza Louina <lidza.louina@gmail.com>
M: Mark Hounschell <markh@compro.net>
M: Daeseok Youn <daeseok.youn@gmail.com>
L: driverdev-devel@linuxdriverproject.org
S: Maintained
@ -5952,7 +5957,7 @@ F: virt/kvm/
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
M: Joerg Roedel <joro@8bytes.org>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
W: http://www.linux-kvm.org/
S: Maintained
F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
@ -5960,7 +5965,7 @@ F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
M: Alexander Graf <agraf@suse.com>
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
W: http://www.linux-kvm.org/
T: git git://github.com/agraf/linux-2.6.git
S: Supported
F: arch/powerpc/include/asm/kvm*
@ -8500,7 +8505,6 @@ F: Documentation/networking/LICENSE.qla3xxx
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Shahed Shaikh <shahed.shaikh@qlogic.com>
M: Dept-GELinuxNICDev@qlogic.com
L: netdev@vger.kernel.org
S: Supported
@ -9904,8 +9908,8 @@ F: drivers/staging/media/lirc/
STAGING - LUSTRE PARALLEL FILESYSTEM
M: Oleg Drokin <oleg.drokin@intel.com>
M: Andreas Dilger <andreas.dilger@intel.com>
L: HPDD-discuss@lists.01.org (moderated for non-subscribers)
W: http://lustre.opensfs.org/
L: lustre-devel@lists.lustre.org (moderated for non-subscribers)
W: http://wiki.lustre.org/
S: Maintained
F: drivers/staging/lustre
@ -10338,6 +10342,16 @@ F: include/uapi/linux/thermal.h
F: include/linux/cpu_cooling.h
F: Documentation/devicetree/bindings/thermal/
THERMAL/CPU_COOLING
M: Amit Daniel Kachhap <amit.kachhap@gmail.com>
M: Viresh Kumar <viresh.kumar@linaro.org>
M: Javi Merino <javi.merino@arm.com>
L: linux-pm@vger.kernel.org
S: Supported
F: Documentation/thermal/cpu-cooling-api.txt
F: drivers/thermal/cpu_cooling.c
F: include/linux/cpu_cooling.h
THINGM BLINK(1) USB RGB LED DRIVER
M: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
S: Maintained
@ -11187,7 +11201,7 @@ F: drivers/vlynq/vlynq.c
F: include/linux/vlynq.h
VME SUBSYSTEM
M: Martyn Welch <martyn.welch@ge.com>
M: Martyn Welch <martyn@welchs.me.uk>
M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
@ -11239,7 +11253,6 @@ VOLTAGE AND CURRENT REGULATOR FRAMEWORK
M: Liam Girdwood <lgirdwood@gmail.com>
M: Mark Brown <broonie@kernel.org>
L: linux-kernel@vger.kernel.org
W: http://opensource.wolfsonmicro.com/node/15
W: http://www.slimlogic.co.uk/?p=48
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
S: Supported
@ -11253,6 +11266,7 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/vrf.c
F: include/net/vrf.h
F: Documentation/networking/vrf.txt
VT1211 HARDWARE MONITOR DRIVER
M: Juerg Haefliger <juergh@gmail.com>
@ -11368,17 +11382,15 @@ WM97XX TOUCHSCREEN DRIVERS
M: Mark Brown <broonie@kernel.org>
M: Liam Girdwood <lrg@slimlogic.co.uk>
L: linux-input@vger.kernel.org
T: git git://opensource.wolfsonmicro.com/linux-2.6-touch
W: http://opensource.wolfsonmicro.com/node/7
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS DRIVERS
L: patches@opensource.wolfsonmicro.com
T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
T: git https://github.com/CirrusLogic/linux-drivers.git
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
F: Documentation/hwmon/wm83??
F: arch/arm/mach-s3c64xx/mach-crag6410*

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*

7
arch/alpha/kernel/pci.c
View File

@ -242,7 +242,12 @@ pci_restore_srm_config(void)
void pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_dev *dev;
struct pci_dev *dev = bus->self;
if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_read_bridge_bases(bus);
}
list_for_each_entry(dev, &bus->devices, bus_list) {
pdev_save_srm_config(dev);

1
arch/arc/include/asm/Kbuild
View File

@ -48,4 +48,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

4
arch/arm/boot/dts/am335x-phycore-som.dtsi
View File

@ -252,10 +252,10 @@ vio_reg: regulator@1 {
};
vdd1_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1312500>;
regulator-max-microvolt = <1378000>;
regulator-boot-on;
regulator-always-on;
};

46
arch/arm/boot/dts/am57xx-beagle-x15.dts
View File

@ -98,13 +98,6 @@ extcon_usb1: extcon_usb1 {
pinctrl-0 = <&extcon_usb1_pins>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&extcon_usb2_pins>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
@ -326,12 +319,6 @@ extcon_usb1_pins: extcon_usb1_pins {
>;
};
extcon_usb2_pins: extcon_usb2_pins {
pinctrl-single,pins = <
0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
@ -432,7 +419,7 @@ ldo2_reg: ldo2 {
};
ldo3_reg: ldo3 {
/* VDDA_1V8_PHY */
/* VDDA_1V8_PHYA */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -440,6 +427,15 @@ ldo3_reg: ldo3 {
regulator-boot-on;
};
ldo4_reg: ldo4 {
/* VDDA_1V8_PHYB */
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo9_reg: ldo9 {
/* VDD_RTC */
regulator-name = "ldo9";
@ -495,6 +491,14 @@ tps659038_gpio: tps659038_gpio {
gpio-controller;
#gpio-cells = <2>;
};
extcon_usb2: tps659038_usb {
compatible = "ti,palmas-usb-vid";
ti,enable-vbus-detection;
ti,enable-id-detection;
id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
};
};
tmp102: tmp102@48 {
@ -517,7 +521,8 @@ &i2c3 {
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
<&dra7_pmx_core 0x424>;
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
@ -579,7 +584,6 @@ &mmc1 {
pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&ldo1_reg>;
vmmc_aux-supply = <&vdd_3v3>;
bus-width = <4>;
cd-gpios = <&gpio6 27 0>; /* gpio 219 */
};
@ -623,6 +627,14 @@ &omap_dwc3_2 {
};
&usb2 {
/*
* Stand alone usage is peripheral only.
* However, with some resistor modifications
* this port can be used via expansion connectors
* as "host" or "dual-role". If so, provide
* the necessary dr_mode override in the expansion
* board's DT.
*/
dr_mode = "peripheral";
};
@ -681,7 +693,7 @@ &dss {
&hdmi {
status = "ok";
vdda-supply = <&ldo3_reg>;
vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;

4
arch/arm/boot/dts/dm8148-evm.dts
View File

@ -19,10 +19,10 @@ memory {
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
phy-mode = "rgmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "mii";
phy-mode = "rgmii";
};

6
arch/arm/boot/dts/dm8148-t410.dts
View File

@ -8,7 +8,7 @@
#include "dm814x.dtsi"
/ {
model = "DM8148 EVM";
model = "HP t410 Smart Zero Client";
compatible = "hp,t410", "ti,dm8148";
memory {
@ -19,10 +19,10 @@ memory {
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
phy-mode = "rgmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "mii";
phy-mode = "rgmii";
};

8
arch/arm/boot/dts/dm814x.dtsi
View File

@ -181,9 +181,9 @@ timer3: timer@42000 {
ti,hwmods = "timer3";
};
control: control@160000 {
control: control@140000 {
compatible = "ti,dm814-scm", "simple-bus";
reg = <0x160000 0x16d000>;
reg = <0x140000 0x16d000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x160000 0x16d000>;
@ -321,9 +321,9 @@ cpsw_emac1: slave@4a100300 {
mac-address = [ 00 00 00 00 00 00 ];
};
phy_sel: cpsw-phy-sel@0x48160650 {
phy_sel: cpsw-phy-sel@48140650 {
compatible = "ti,am3352-cpsw-phy-sel";
reg= <0x48160650 0x4>;
reg= <0x48140650 0x4>;
reg-names = "gmii-sel";
};
};

5
arch/arm/boot/dts/dra7.dtsi
View File

@ -120,9 +120,10 @@ scm_conf: scm_conf@0 {
reg = <0x0 0x1400>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x1400>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
compatible = "ti,pbias-dra7", "ti,pbias-omap";
reg = <0xe00 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap5 {
@ -1417,7 +1418,7 @@ crossbar_mpu: crossbar@4a002a48 {
ti,irqs-safe-map = <0>;
};
mac: ethernet@4a100000 {
mac: ethernet@48484000 {
compatible = "ti,dra7-cpsw","ti,cpsw";
ti,hwmods = "gmac";
clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;

3
arch/arm/boot/dts/omap2430.dtsi
View File

@ -56,6 +56,7 @@ scm_conf: scm_conf@270 {
reg = <0x270 0x240>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x270 0x240>;
scm_clocks: clocks {
#address-cells = <1>;
@ -63,7 +64,7 @@ scm_clocks: clocks {
};
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
compatible = "ti,pbias-omap2", "ti,pbias-omap";
reg = <0x230 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {

2
arch/arm/boot/dts/omap3-beagle.dts
View File

@ -202,7 +202,7 @@ uart3_pins: pinmux_uart3_pins {
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};

6
arch/arm/boot/dts/omap3-igep.dtsi
View File

@ -78,12 +78,6 @@ mmc2_pins: pinmux_mmc2_pins {
>;
};
smsc9221_pins: pinmux_smsc9221_pins {
pinctrl-single,pins = <
0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */

6
arch/arm/boot/dts/omap3-igep0020-common.dtsi
View File

@ -156,6 +156,12 @@ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
>;
};
smsc9221_pins: pinmux_smsc9221_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
>;
};
};
&omap3_pmx_core2 {

25
arch/arm/boot/dts/omap3.dtsi
View File

@ -113,10 +113,22 @@ omap3_pmx_core: pinmux@30 {
};
scm_conf: scm_conf@270 {
compatible = "syscon";
compatible = "syscon", "simple-bus";
reg = <0x270 0x330>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x270 0x330>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap3", "ti,pbias-omap";
reg = <0x2b0 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {
regulator-name = "pbias_mmc_omap2430";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
};
scm_clocks: clocks {
#address-cells = <1>;
@ -202,17 +214,6 @@ sdma: dma-controller@48056000 {
dma-requests = <96>;
};
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
reg = <0x2b0 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {
regulator-name = "pbias_mmc_omap2430";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
};
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
reg = <0x48310000 0x200>;

3
arch/arm/boot/dts/omap4.dtsi
View File

@ -196,9 +196,10 @@ omap4_padconf_global: omap4_padconf_global@5a0 {
reg = <0x5a0 0x170>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5a0 0x170>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
compatible = "ti,pbias-omap4", "ti,pbias-omap";
reg = <0x60 0x4>;
syscon = <&omap4_padconf_global>;
pbias_mmc_reg: pbias_mmc_omap4 {

4
arch/arm/boot/dts/omap5-uevm.dts
View File

@ -174,8 +174,8 @@ i2c1_pins: pinmux_i2c1_pins {
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};

3
arch/arm/boot/dts/omap5.dtsi
View File

@ -185,9 +185,10 @@ omap5_padconf_global: omap5_padconf_global@5a0 {
reg = <0x5a0 0xec>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5a0 0xec>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
compatible = "ti,pbias-omap5", "ti,pbias-omap";
reg = <0x60 0x4>;
syscon = <&omap5_padconf_global>;
pbias_mmc_reg: pbias_mmc_omap5 {

1
arch/arm/boot/dts/rk3288-veyron.dtsi
View File

@ -158,6 +158,7 @@ &emmc {
};
&hdmi {
ddc-i2c-bus = <&i2c5>;
status = "okay";
};

74
arch/arm/boot/dts/stih407.dtsi
View File

@ -103,48 +103,46 @@ sti-tvout@8d08000 {
<&clk_s_d0_quadfs 0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 0>;
ranges;
};
sti-hdmi@8d04000 {
compatible = "st,stih407-hdmi";
reg = <0x8d04000 0x1000>;
reg-names = "hdmi-reg";
interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
"audio",
"main_parent",
"aux_parent";
sti-hdmi@8d04000 {
compatible = "st,stih407-hdmi";
reg = <0x8d04000 0x1000>;
reg-names = "hdmi-reg";
interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
"audio",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
<&clk_s_d2_flexgen CLK_TMDS_HDMI>,
<&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
<&clk_s_d0_flexgen CLK_PCM_0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
<&clk_s_d2_flexgen CLK_TMDS_HDMI>,
<&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
<&clk_s_d0_flexgen CLK_PCM_0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
hdmi,hpd-gpio = <&pio5 3>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
hdmi,hpd-gpio = <&pio5 3>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
};
};
sti-hda@8d02000 {
compatible = "st,stih407-hda";
reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
reg-names = "hda-reg", "video-dacs-ctrl";
clock-names = "pix",
"hddac",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
<&clk_s_d2_flexgen CLK_HDDAC>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
};
sti-hda@8d02000 {
compatible = "st,stih407-hda";
reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
reg-names = "hda-reg", "video-dacs-ctrl";
clock-names = "pix",
"hddac",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
<&clk_s_d2_flexgen CLK_HDDAC>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
};
};
};

74
arch/arm/boot/dts/stih410.dtsi
View File

@ -178,48 +178,46 @@ sti-tvout@8d08000 {
<&clk_s_d0_quadfs 0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 0>;
ranges;
};
sti-hdmi@8d04000 {
compatible = "st,stih407-hdmi";
reg = <0x8d04000 0x1000>;
reg-names = "hdmi-reg";
interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
"audio",
"main_parent",
"aux_parent";
sti-hdmi@8d04000 {
compatible = "st,stih407-hdmi";
reg = <0x8d04000 0x1000>;
reg-names = "hdmi-reg";
interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
"audio",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
<&clk_s_d2_flexgen CLK_TMDS_HDMI>,
<&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
<&clk_s_d0_flexgen CLK_PCM_0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
<&clk_s_d2_flexgen CLK_TMDS_HDMI>,
<&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
<&clk_s_d0_flexgen CLK_PCM_0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
hdmi,hpd-gpio = <&pio5 3>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
hdmi,hpd-gpio = <&pio5 3>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
};
};
sti-hda@8d02000 {
compatible = "st,stih407-hda";
reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
reg-names = "hda-reg", "video-dacs-ctrl";
clock-names = "pix",
"hddac",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
<&clk_s_d2_flexgen CLK_HDDAC>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
};
sti-hda@8d02000 {
compatible = "st,stih407-hda";
reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
reg-names = "hda-reg", "video-dacs-ctrl";
clock-names = "pix",
"hddac",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
<&clk_s_d2_flexgen CLK_HDDAC>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
};
};

5
arch/arm/configs/omap2plus_defconfig
View File

@ -240,7 +240,8 @@ CONFIG_SSI_PROTOCOL=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_PALMAS=y
CONFIG_W1=m
@ -350,6 +351,8 @@ CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_DWC3=m
CONFIG_USB_TEST=m
CONFIG_AM335X_PHY_USB=y

1
arch/arm/include/asm/kvm_host.h
View File

@ -33,6 +33,7 @@
#define KVM_PRIVATE_MEM_SLOTS 4
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_HAVE_ONE_REG
#define KVM_HALT_POLL_NS_DEFAULT 500000
#define KVM_VCPU_MAX_FEATURES 2

2
arch/arm/include/asm/unistd.h
View File

@ -19,7 +19,7 @@
* This may need to be greater than __NR_last_syscall+1 in order to
* account for the padding in the syscall table
*/
#define __NR_syscalls (388)
#define __NR_syscalls (392)
/*
* *NOTE*: This is a ghost syscall private to the kernel. Only the

2
arch/arm/include/uapi/asm/unistd.h
View File

@ -414,6 +414,8 @@
#define __NR_memfd_create (__NR_SYSCALL_BASE+385)
#define __NR_bpf (__NR_SYSCALL_BASE+386)
#define __NR_execveat (__NR_SYSCALL_BASE+387)
#define __NR_userfaultfd (__NR_SYSCALL_BASE+388)
#define __NR_membarrier (__NR_SYSCALL_BASE+389)
/*
* The following SWIs are ARM private.

2
arch/arm/kernel/calls.S
View File

@ -397,6 +397,8 @@
/* 385 */ CALL(sys_memfd_create)
CALL(sys_bpf)
CALL(sys_execveat)
CALL(sys_userfaultfd)
CALL(sys_membarrier)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

6
arch/arm/mach-omap2/Kconfig
View File

@ -44,10 +44,11 @@ config SOC_OMAP5
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
config SOC_AM33XX
bool "TI AM33XX"
@ -70,10 +71,13 @@ config SOC_DRA7XX
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
select ARM_ERRATA_798181 if SMP
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
config ARCH_OMAP2PLUS
bool

7
arch/arm/mach-omap2/board-generic.c
View File

@ -20,13 +20,6 @@
#include "common.h"
#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
#define intc_of_init NULL
#endif
#ifndef CONFIG_ARCH_OMAP4
#define gic_of_init NULL
#endif
static const struct of_device_id omap_dt_match_table[] __initconst = {
{ .compatible = "simple-bus", },
{ .compatible = "ti,omap-infra", },

8
arch/arm/mach-omap2/id.c
View File

@ -653,8 +653,12 @@ void __init dra7xxx_check_revision(void)
omap_revision = DRA752_REV_ES1_0;
break;
case 1:
default:
omap_revision = DRA752_REV_ES1_1;
break;
case 2:
default:
omap_revision = DRA752_REV_ES2_0;
break;
}
break;
@ -674,7 +678,7 @@ void __init dra7xxx_check_revision(void)
/* Unknown default to latest silicon rev as default*/
pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
__func__, idcode, hawkeye, rev);
omap_revision = DRA752_REV_ES1_1;
omap_revision = DRA752_REV_ES2_0;
}
sprintf(soc_name, "DRA%03x", omap_rev() >> 16);

1
arch/arm/mach-omap2/io.c
View File

@ -676,6 +676,7 @@ void __init am43xx_init_early(void)
void __init am43xx_init_late(void)
{
omap_common_late_init();
omap2_clk_enable_autoidle_all();
}
#endif

3
arch/arm/mach-omap2/omap_device.c
View File

@ -901,7 +901,8 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
return 0;
if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER &&
od->_driver_status != BUS_NOTIFY_BIND_DRIVER) {
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
dev_warn(dev, "%s: enabled but no driver. Idling\n",
__func__);

3
arch/arm/mach-omap2/pm.h
View File

@ -103,7 +103,8 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { }
#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0)
#define PM_OMAP4_CPU_OSWR_DISABLE (1 << 1)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) ||\
defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX))
extern u16 pm44xx_errata;
#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id))
#else

2
arch/arm/mach-omap2/soc.h
View File

@ -469,6 +469,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define DRA7XX_CLASS 0x07000000
#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
void omap2xxx_check_revision(void);

8
arch/arm/mach-omap2/timer.c
View File

@ -297,12 +297,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
if (IS_ERR(src))
return PTR_ERR(src);
r = clk_set_parent(timer->fclk, src);
if (r < 0) {
pr_warn("%s: %s cannot set source\n", __func__, oh->name);
clk_put(src);
return r;
}
WARN(clk_set_parent(timer->fclk, src) < 0,
"Cannot set timer parent clock, no PLL clock driver?");
clk_put(src);

2
arch/arm/mach-omap2/vc.c
View File

@ -300,7 +300,7 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET);
if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) ||
(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) {
(val & OMAP3430_PRM_POLCTRL_OFFMODE_POL)) {
val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL;
val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL;
pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n",

2
arch/arm/mach-pxa/balloon3.c
View File

@ -502,7 +502,7 @@ static void balloon3_irq_handler(struct irq_desc *desc)
balloon3_irq_enabled;
do {
struct irq_data *d = irq_desc_get_irq_data(desc);
struct irq_chip *chip = irq_data_get_chip(d);
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int irq;
/* clear useless edge notification */

7
arch/arm/mach-pxa/include/mach/addr-map.h
View File

@ -43,6 +43,13 @@
* 0xf6200000..0xf6201000
*/
/*
* DFI Bus for NAND, PXA3xx only
*/
#define NAND_PHYS 0x43100000
#define NAND_VIRT IOMEM(0xf6300000)
#define NAND_SIZE 0x00100000
/*
* Internal Memory Controller (PXA27x and later)
*/

21
arch/arm/mach-pxa/pxa3xx.c
View File

@ -47,6 +47,13 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
#define ISRAM_START 0x5c000000
#define ISRAM_SIZE SZ_256K
/*
* NAND NFC: DFI bus arbitration subset
*/
#define NDCR (*(volatile u32 __iomem*)(NAND_VIRT + 0))
#define NDCR_ND_ARB_EN (1 << 12)
#define NDCR_ND_ARB_CNTL (1 << 19)
static void __iomem *sram;
static unsigned long wakeup_src;
@ -362,7 +369,12 @@ static struct map_desc pxa3xx_io_desc[] __initdata = {
.pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
.length = SMEMC_SIZE,
.type = MT_DEVICE
}
}, {
.virtual = (unsigned long)NAND_VIRT,
.pfn = __phys_to_pfn(NAND_PHYS),
.length = NAND_SIZE,
.type = MT_DEVICE
},
};
void __init pxa3xx_map_io(void)
@ -419,6 +431,13 @@ static int __init pxa3xx_init(void)
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
/*
* Disable DFI bus arbitration, to prevent a system bus lock if
* somebody disables the NAND clock (unused clock) while this
* bit remains set.
*/
NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;

30
arch/arm/mm/alignment.c
View File

@ -365,15 +365,21 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
user:
if (LDST_L_BIT(instr)) {
unsigned long val;
unsigned int __ua_flags = uaccess_save_and_enable();
get16t_unaligned_check(val, addr);
uaccess_restore(__ua_flags);
/* signed half-word? */
if (instr & 0x40)
val = (signed long)((signed short) val);
regs->uregs[rd] = val;
} else
} else {
unsigned int __ua_flags = uaccess_save_and_enable();
put16t_unaligned_check(regs->uregs[rd], addr);
uaccess_restore(__ua_flags);
}
return TYPE_LDST;
@ -420,14 +426,21 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
user:
if (load) {
unsigned long val;
unsigned long val, val2;
unsigned int __ua_flags = uaccess_save_and_enable();
get32t_unaligned_check(val, addr);
get32t_unaligned_check(val2, addr + 4);
uaccess_restore(__ua_flags);
regs->uregs[rd] = val;
get32t_unaligned_check(val, addr + 4);
regs->uregs[rd2] = val;
regs->uregs[rd2] = val2;
} else {
unsigned int __ua_flags = uaccess_save_and_enable();
put32t_unaligned_check(regs->uregs[rd], addr);
put32t_unaligned_check(regs->uregs[rd2], addr + 4);
uaccess_restore(__ua_flags);
}
return TYPE_LDST;
@ -458,10 +471,15 @@ do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *reg
trans:
if (LDST_L_BIT(instr)) {
unsigned int val;
unsigned int __ua_flags = uaccess_save_and_enable();
get32t_unaligned_check(val, addr);
uaccess_restore(__ua_flags);
regs->uregs[rd] = val;
} else
} else {
unsigned int __ua_flags = uaccess_save_and_enable();
put32t_unaligned_check(regs->uregs[rd], addr);
uaccess_restore(__ua_flags);
}
return TYPE_LDST;
fault:
@ -531,6 +549,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
#endif
if (user_mode(regs)) {
unsigned int __ua_flags = uaccess_save_and_enable();
for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
regbits >>= 1, rd += 1)
if (regbits & 1) {
@ -542,6 +561,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
put32t_unaligned_check(regs->uregs[rd], eaddr);
eaddr += 4;
}
uaccess_restore(__ua_flags);
} else {
for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
regbits >>= 1, rd += 1)

1
arch/arm/plat-pxa/ssp.c
View File

@ -107,7 +107,6 @@ static const struct of_device_id pxa_ssp_of_ids[] = {
{ .compatible = "mvrl,pxa168-ssp", .data = (void *) PXA168_SSP },
{ .compatible = "mrvl,pxa910-ssp", .data = (void *) PXA910_SSP },
{ .compatible = "mrvl,ce4100-ssp", .data = (void *) CE4100_SSP },
{ .compatible = "mrvl,lpss-ssp", .data = (void *) LPSS_SSP },
{ },
};
MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);

2
arch/arm64/boot/dts/mediatek/mt8173.dtsi
View File

@ -81,7 +81,7 @@ cpu3: cpu@101 {
};
idle-states {
entry-method = "arm,psci";
entry-method = "psci";
CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";

2
arch/arm64/boot/dts/rockchip/rk3368.dtsi
View File

@ -106,7 +106,7 @@ core3 {
};
idle-states {
entry-method = "arm,psci";
entry-method = "psci";
cpu_sleep: cpu-sleep-0 {
compatible = "arm,idle-state";

1
arch/arm64/include/asm/kvm_host.h
View File

@ -33,6 +33,7 @@
#define KVM_USER_MEM_SLOTS 32
#define KVM_PRIVATE_MEM_SLOTS 4
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_HALT_POLL_NS_DEFAULT 500000
#include <kvm/arm_vgic.h>
#include <kvm/arm_arch_timer.h>

4
arch/arm64/include/asm/pgtable.h
View File

@ -79,7 +79,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define PAGE_S2 __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY)
#define PAGE_S2_DEVICE __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
#define PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
@ -496,7 +496,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK;
PTE_PROT_NONE | PTE_VALID | PTE_WRITE;
/* preserve the hardware dirty information */
if (pte_hw_dirty(pte))
pte = pte_mkdirty(pte);

3
arch/arm64/kernel/efi.c
View File

@ -258,7 +258,8 @@ static bool __init efi_virtmap_init(void)
*/
if (!is_normal_ram(md))
prot = __pgprot(PROT_DEVICE_nGnRE);
else if (md->type == EFI_RUNTIME_SERVICES_CODE)
else if (md->type == EFI_RUNTIME_SERVICES_CODE ||
!PAGE_ALIGNED(md->phys_addr))
prot = PAGE_KERNEL_EXEC;
else
prot = PAGE_KERNEL;

22
arch/arm64/kernel/entry-ftrace.S
View File

@ -178,6 +178,24 @@ ENTRY(ftrace_stub)
ENDPROC(ftrace_stub)
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* save return value regs*/
.macro save_return_regs
sub sp, sp, #64
stp x0, x1, [sp]
stp x2, x3, [sp, #16]
stp x4, x5, [sp, #32]
stp x6, x7, [sp, #48]
.endm
/* restore return value regs*/
.macro restore_return_regs
ldp x0, x1, [sp]
ldp x2, x3, [sp, #16]
ldp x4, x5, [sp, #32]
ldp x6, x7, [sp, #48]
add sp, sp, #64
.endm
/*
* void ftrace_graph_caller(void)
*
@ -204,11 +222,11 @@ ENDPROC(ftrace_graph_caller)
* only when CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST is enabled.
*/
ENTRY(return_to_handler)
str x0, [sp, #-16]!
save_return_regs
mov x0, x29 // parent's fp
bl ftrace_return_to_handler// addr = ftrace_return_to_hander(fp);
mov x30, x0 // restore the original return address
ldr x0, [sp], #16
restore_return_regs
ret
END(return_to_handler)
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */

1
arch/avr32/include/asm/Kbuild
View File

@ -20,4 +20,5 @@ generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/blackfin/include/asm/Kbuild
View File

@ -46,4 +46,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/c6x/include/asm/Kbuild
View File

@ -59,4 +59,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/cris/include/asm/Kbuild
View File

@ -43,4 +43,5 @@ generic-y += topology.h
generic-y += trace_clock.h
generic-y += types.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/frv/include/asm/Kbuild
View File

@ -7,3 +7,4 @@ generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

2
arch/frv/mb93090-mb00/pci-vdk.c
View File

@ -294,6 +294,8 @@ void pcibios_fixup_bus(struct pci_bus *bus)
printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
#endif
pci_read_bridge_bases(bus);
if (bus->number == 0) {
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {

1
arch/hexagon/include/asm/Kbuild
View File

@ -58,4 +58,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/ia64/include/asm/Kbuild
View File

@ -8,3 +8,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += vtime.h
generic-y += word-at-a-time.h

5
arch/ia64/pci/pci.c
View File

@ -533,9 +533,10 @@ void pcibios_fixup_bus(struct pci_bus *b)
{
struct pci_dev *dev;
if (b->self)
if (b->self) {
pci_read_bridge_bases(b);
pcibios_fixup_bridge_resources(b->self);
}
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
platform_pci_fixup_bus(b);

1
arch/m32r/include/asm/Kbuild
View File

@ -9,3 +9,4 @@ generic-y += module.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

9
arch/m68k/configs/amiga_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -57,7 +58,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -67,10 +67,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -179,6 +181,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -206,6 +209,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -370,6 +375,7 @@ CONFIG_ZORRO8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -537,6 +543,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/apollo_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -344,6 +349,7 @@ CONFIG_VETH=m
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -495,6 +501,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/atari_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -355,6 +360,7 @@ CONFIG_NE2000=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -517,6 +523,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/bvme6000_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_BVME6000_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/hp300_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -345,6 +350,7 @@ CONFIG_HPLANCE=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -497,6 +503,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/mac_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -54,7 +55,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -64,10 +64,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -176,6 +178,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -203,6 +206,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -364,6 +369,7 @@ CONFIG_MAC8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -519,6 +525,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/multi_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -64,7 +65,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -74,10 +74,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -186,6 +188,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -213,6 +216,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -281,6 +285,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -410,6 +415,7 @@ CONFIG_ZORRO8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PLIP=m
@ -599,6 +605,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/mvme147_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -52,7 +53,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -62,10 +62,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -174,6 +176,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -201,6 +204,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -266,6 +270,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_MVME147_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/mvme16x_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_MVME16x_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/q40_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -354,6 +359,7 @@ CONFIG_NE2000=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PLIP=m
@ -510,6 +516,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/sun3_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -341,6 +346,7 @@ CONFIG_SUN3_82586=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y

9
arch/m68k/configs/sun3x_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -341,6 +346,7 @@ CONFIG_SUN3LANCE=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

30
arch/m68k/include/asm/linkage.h
View File

@ -4,4 +4,34 @@
#define __ALIGN .align 4
#define __ALIGN_STR ".align 4"
/*
* Make sure the compiler doesn't do anything stupid with the
* arguments on the stack - they are owned by the *caller*, not
* the callee. This just fools gcc into not spilling into them,
* and keeps it from doing tailcall recursion and/or using the
* stack slots for temporaries, since they are live and "used"
* all the way to the end of the function.
*/
#define asmlinkage_protect(n, ret, args...) \
__asmlinkage_protect##n(ret, ##args)
#define __asmlinkage_protect_n(ret, args...) \
__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
#define __asmlinkage_protect0(ret) \
__asmlinkage_protect_n(ret)
#define __asmlinkage_protect1(ret, arg1) \
__asmlinkage_protect_n(ret, "m" (arg1))
#define __asmlinkage_protect2(ret, arg1, arg2) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2))
#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3))
#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4))
#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4), "m" (arg5))
#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4), "m" (arg5), "m" (arg6))
#endif

2
arch/m68k/include/asm/unistd.h
View File

@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
#define NR_syscalls 356
#define NR_syscalls 375
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT

19
arch/m68k/include/uapi/asm/unistd.h
View File

@ -361,5 +361,24 @@
#define __NR_memfd_create 353
#define __NR_bpf 354
#define __NR_execveat 355
#define __NR_socket 356
#define __NR_socketpair 357
#define __NR_bind 358
#define __NR_connect 359
#define __NR_listen 360
#define __NR_accept4 361
#define __NR_getsockopt 362
#define __NR_setsockopt 363
#define __NR_getsockname 364
#define __NR_getpeername 365
#define __NR_sendto 366
#define __NR_sendmsg 367
#define __NR_recvfrom 368
#define __NR_recvmsg 369
#define __NR_shutdown 370
#define __NR_recvmmsg 371
#define __NR_sendmmsg 372
#define __NR_userfaultfd 373
#define __NR_membarrier 374
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */

20
arch/m68k/kernel/syscalltable.S
View File

@ -376,4 +376,22 @@ ENTRY(sys_call_table)
.long sys_memfd_create
.long sys_bpf
.long sys_execveat /* 355 */
.long sys_socket
.long sys_socketpair
.long sys_bind
.long sys_connect
.long sys_listen /* 360 */
.long sys_accept4
.long sys_getsockopt
.long sys_setsockopt
.long sys_getsockname
.long sys_getpeername /* 365 */
.long sys_sendto
.long sys_sendmsg
.long sys_recvfrom
.long sys_recvmsg
.long sys_shutdown /* 370 */
.long sys_recvmmsg
.long sys_sendmmsg
.long sys_userfaultfd
.long sys_membarrier

1
arch/metag/include/asm/Kbuild
View File

@ -54,4 +54,5 @@ generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/microblaze/include/asm/Kbuild
View File

@ -10,3 +10,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += syscalls.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

9
arch/microblaze/pci/pci-common.c
View File

@ -863,7 +863,14 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
void pcibios_fixup_bus(struct pci_bus *bus)
{
/* Fixup the bus */
/* When called from the generic PCI probe, read PCI<->PCI bridge
* bases. This is -not- called when generating the PCI tree from
* the OF device-tree.
*/
if (bus->self != NULL)
pci_read_bridge_bases(bus);
/* Now fixup the bus bus */
pcibios_setup_bus_self(bus);
/* Now fixup devices on that bus */

22
arch/mips/ath79/irq.c
View File

@ -293,8 +293,26 @@ static int __init ath79_misc_intc_of_init(
return 0;
}
IRQCHIP_DECLARE(ath79_misc_intc, "qca,ar7100-misc-intc",
ath79_misc_intc_of_init);
static int __init ar7100_misc_intc_of_init(
struct device_node *node, struct device_node *parent)
{
ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
return ath79_misc_intc_of_init(node, parent);
}
IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
ar7100_misc_intc_of_init);
static int __init ar7240_misc_intc_of_init(
struct device_node *node, struct device_node *parent)
{
ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
return ath79_misc_intc_of_init(node, parent);
}
IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
ar7240_misc_intc_of_init);
static int __init ar79_cpu_intc_of_init(
struct device_node *node, struct device_node *parent)

2
arch/mips/cavium-octeon/setup.c
View File

@ -933,7 +933,7 @@ void __init plat_mem_setup(void)
while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
&& (total < MAX_MEMORY)) {
memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
__pa_symbol(&__init_end), -1,
__pa_symbol(&_end), -1,
0x100000,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
if (memory >= 0) {

1
arch/mips/include/asm/Kbuild
View File

@ -17,4 +17,5 @@ generic-y += segment.h
generic-y += serial.h
generic-y += trace_clock.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h

3
arch/mips/include/asm/cpu-features.h
View File

@ -20,6 +20,9 @@
#ifndef cpu_has_tlb
#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB)
#endif
#ifndef cpu_has_ftlb
#define cpu_has_ftlb (cpu_data[0].options & MIPS_CPU_FTLB)
#endif
#ifndef cpu_has_tlbinv
#define cpu_has_tlbinv (cpu_data[0].options & MIPS_CPU_TLBINV)
#endif

1
arch/mips/include/asm/cpu.h
View File

@ -385,6 +385,7 @@ enum cpu_type_enum {
#define MIPS_CPU_CDMM 0x4000000000ull /* CPU has Common Device Memory Map */
#define MIPS_CPU_BP_GHIST 0x8000000000ull /* R12K+ Branch Prediction Global History */
#define MIPS_CPU_SP 0x10000000000ull /* Small (1KB) page support */
#define MIPS_CPU_FTLB 0x20000000000ull /* CPU has Fixed-page-size TLB */
/*
* CPU ASE encodings

1
arch/mips/include/asm/kvm_host.h
View File

@ -61,6 +61,7 @@
#define KVM_PRIVATE_MEM_SLOTS 0
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_HALT_POLL_NS_DEFAULT 500000

Some files were not shown because too many files have changed in this diff Show More