mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 10:30:52 +07:00
powerpc: Board support for GE Fanuc SBC610
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the basic board support for GE Fanuc's SBC610, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Martyn Welch
Kumar Gala
parent
66576a87dd
commit
54508214cf
260
arch/powerpc/boot/dts/gef_sbc610.dts
Normal file
260
arch/powerpc/boot/dts/gef_sbc610.dts
Normal file
@ -0,0 +1,260 @@
|
||||
/*
|
||||
* GE Fanuc SBC610 Device Tree Source
|
||||
*
|
||||
* Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* Based on: SBS CM6 Device Tree Source
|
||||
* Copyright 2007 SBS Technologies GmbH & Co. KG
|
||||
* And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
|
||||
* Copyright 2006 Freescale Semiconductor Inc.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
model = "GEF_SBC610";
|
||||
compatible = "gef,sbc610";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8641@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>; // 32 bytes
|
||||
i-cache-line-size = <32>; // 32 bytes
|
||||
d-cache-size = <32768>; // L1, 32K
|
||||
i-cache-size = <32768>; // L1, 32K
|
||||
timebase-frequency = <0>; // From uboot
|
||||
bus-frequency = <0>; // From uboot
|
||||
clock-frequency = <0>; // From uboot
|
||||
};
|
||||
PowerPC,8641@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
d-cache-line-size = <32>; // 32 bytes
|
||||
i-cache-line-size = <32>; // 32 bytes
|
||||
d-cache-size = <32768>; // L1, 32K
|
||||
i-cache-size = <32768>; // L1, 32K
|
||||
timebase-frequency = <0>; // From uboot
|
||||
bus-frequency = <0>; // From uboot
|
||||
clock-frequency = <0>; // From uboot
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x40000000>; // set by uboot
|
||||
};
|
||||
|
||||
soc@fef00000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#interrupt-cells = <2>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x0 0xfef00000 0x00100000>;
|
||||
reg = <0xfef00000 0x100000>; // CCSRBAR 1M
|
||||
bus-frequency = <0>;
|
||||
|
||||
i2c1: i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <0x2b 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
|
||||
eti@6b {
|
||||
compatible = "dallas,ds1682";
|
||||
reg = <0x6b>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2: i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <0x2b 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
|
||||
reg = <0x21300 0x4>;
|
||||
ranges = <0x0 0x21100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,mpc8641-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <20 2>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,mpc8641-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <21 2>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,mpc8641-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <22 2>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,mpc8641-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <23 2>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-mdio";
|
||||
reg = <0x24520 0x20>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <0x0 0x1>;
|
||||
reg = <1>;
|
||||
};
|
||||
phy2: ethernet-phy@2 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <0x0 0x1>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "gmii";
|
||||
};
|
||||
|
||||
enet1: ethernet@26000 {
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x26000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
phy-handle = <&phy2>;
|
||||
phy-connection-type = "gmii";
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x2a 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x1c 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
clock-frequency = <0>;
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "chrp,open-pic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,mpc8641-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@fef08000 {
|
||||
compatible = "fsl,mpc8641-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0xfef08000 0x1000>;
|
||||
bus-range = <0x0 0xff>;
|
||||
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
|
||||
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <0x18 0x2>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
|
||||
0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
|
||||
0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
|
||||
0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
|
||||
>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x02000000 0x0 0x80000000
|
||||
0x02000000 0x0 0x80000000
|
||||
0x0 0x40000000
|
||||
|
||||
0x01000000 0x0 0x00000000
|
||||
0x01000000 0x0 0x00000000
|
||||
0x0 0x00400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -31,6 +31,13 @@ config MPC8610_HPCD
|
||||
help
|
||||
This option enables support for the MPC8610 HPCD board.
|
||||
|
||||
config GEF_SBC610
|
||||
bool "GE Fanuc SBC610"
|
||||
select DEFAULT_UIMAGE
|
||||
select HAS_RAPIDIO
|
||||
help
|
||||
This option enables support for GE Fanuc's SBC610.
|
||||
|
||||
endif
|
||||
|
||||
config MPC8641
|
||||
@ -39,7 +46,7 @@ config MPC8641
|
||||
select FSL_PCI if PCI
|
||||
select PPC_UDBG_16550
|
||||
select MPIC
|
||||
default y if MPC8641_HPCN || SBC8641D
|
||||
default y if MPC8641_HPCN || SBC8641D || GEF_SBC610
|
||||
|
||||
config MPC8610
|
||||
bool
|
||||
|
||||
@ -7,3 +7,4 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o
|
||||
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
|
||||
obj-$(CONFIG_SBC8641D) += sbc8641d.o
|
||||
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
|
||||
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o
|
||||
|
||||
149
arch/powerpc/platforms/86xx/gef_sbc610.c
Normal file
149
arch/powerpc/platforms/86xx/gef_sbc610.c
Normal file
@ -0,0 +1,149 @@
|
||||
/*
|
||||
* GE Fanuc SBC610 board support
|
||||
*
|
||||
* Author: Martyn Welch <martyn.welch@gefanuc.com>
|
||||
*
|
||||
* Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
|
||||
* Copyright 2006 Freescale Semiconductor Inc.
|
||||
*/
|
||||
|
||||
#include <linux/stddef.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/kdev_t.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/system.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <asm/mpc86xx.h>
|
||||
#include <asm/prom.h>
|
||||
#include <mm/mmu_decl.h>
|
||||
#include <asm/udbg.h>
|
||||
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <sysdev/fsl_pci.h>
|
||||
#include <sysdev/fsl_soc.h>
|
||||
|
||||
#include "mpc86xx.h"
|
||||
|
||||
#undef DEBUG
|
||||
|
||||
#ifdef DEBUG
|
||||
#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
|
||||
#else
|
||||
#define DBG (fmt...) do { } while (0)
|
||||
#endif
|
||||
|
||||
static void __init gef_sbc610_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
|
||||
fsl_add_bridge(np, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
mpc86xx_smp_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
static void gef_sbc610_show_cpuinfo(struct seq_file *m)
|
||||
{
|
||||
struct device_node *root;
|
||||
uint memsize = total_memory;
|
||||
const char *model = "";
|
||||
uint svid = mfspr(SPRN_SVR);
|
||||
|
||||
seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
|
||||
|
||||
root = of_find_node_by_path("/");
|
||||
if (root)
|
||||
model = of_get_property(root, "model", NULL);
|
||||
seq_printf(m, "Machine\t\t: %s\n", model);
|
||||
of_node_put(root);
|
||||
|
||||
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
|
||||
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*
|
||||
* This function is called to determine whether the BSP is compatible with the
|
||||
* supplied device-tree, which is assumed to be the correct one for the actual
|
||||
* board. It is expected thati, in the future, a kernel may support multiple
|
||||
* boards.
|
||||
*/
|
||||
static int __init gef_sbc610_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "gef,sbc610"))
|
||||
return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static long __init mpc86xx_time_init(void)
|
||||
{
|
||||
unsigned int temp;
|
||||
|
||||
/* Set the time base to zero */
|
||||
mtspr(SPRN_TBWL, 0);
|
||||
mtspr(SPRN_TBWU, 0);
|
||||
|
||||
temp = mfspr(SPRN_HID0);
|
||||
temp |= HID0_TBEN;
|
||||
mtspr(SPRN_HID0, temp);
|
||||
asm volatile("isync");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static __initdata struct of_device_id of_bus_ids[] = {
|
||||
{ .compatible = "simple-bus", },
|
||||
{},
|
||||
};
|
||||
|
||||
static int __init declare_of_platform_devices(void)
|
||||
{
|
||||
printk(KERN_DEBUG "Probe platform devices\n");
|
||||
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(gef_sbc610, declare_of_platform_devices);
|
||||
|
||||
define_machine(gef_sbc610) {
|
||||
.name = "GE Fanuc SBC610",
|
||||
.probe = gef_sbc610_probe,
|
||||
.setup_arch = gef_sbc610_setup_arch,
|
||||
.init_IRQ = mpc86xx_init_irq,
|
||||
.show_cpuinfo = gef_sbc610_show_cpuinfo,
|
||||
.get_irq = mpic_get_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.time_init = mpc86xx_time_init,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user