mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-02 16:56:49 +07:00
powerpc/85xx: Added P1020RDB Platform support.
P1020 is another member of Freescale QorIQ series of processors. It is an e500 based dual core SOC. Being a scaled down version of P2020 it has following differences from P2020: - 533MHz - 800MHz core frequency. - 256Kbyte L2 cache - Ethernet controllers with classification capabilities(new controller). From board perspective P1020RDB is same as P2020RDB. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Poonam Aggrwal
Kumar Gala
parent
46d2293470
commit
52dffd7fbf
477
arch/powerpc/boot/dts/p1020rdb.dts
Normal file
477
arch/powerpc/boot/dts/p1020rdb.dts
Normal file
@ -0,0 +1,477 @@
|
||||
/*
|
||||
* P1020 RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2009 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
model = "fsl,P1020";
|
||||
compatible = "fsl,P1020RDB";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1020@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P1020@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
interrupts = <19 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
|
||||
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
|
||||
0x1 0x0 0x0 0xffa00000 0x00040000
|
||||
0x2 0x0 0x0 0xffb00000 0x00020000>;
|
||||
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x1000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
/* 256KB for Vitesse 7385 Switch firmware */
|
||||
reg = <0x0 0x00040000>;
|
||||
label = "NOR (RO) Vitesse-7385 Firmware";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
/* 256KB for DTB Image */
|
||||
reg = <0x00040000 0x00040000>;
|
||||
label = "NOR (RO) DTB Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
/* 3.5 MB for Linux Kernel Image */
|
||||
reg = <0x00080000 0x00380000>;
|
||||
label = "NOR (RO) Linux Kernel Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
/* 11MB for JFFS2 based Root file System */
|
||||
reg = <0x00400000 0x00b00000>;
|
||||
label = "NOR (RW) JFFS2 Root File System";
|
||||
};
|
||||
|
||||
partition@f00000 {
|
||||
/* This location must not be altered */
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
/* 512KB for u-boot Environment Variables */
|
||||
reg = <0x00f00000 0x00100000>;
|
||||
label = "NOR (RO) U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
nand@1,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1020-fcm-nand",
|
||||
"fsl,elbc-fcm-nand";
|
||||
reg = <0x1 0x0 0x40000>;
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
/* 1MB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00100000>;
|
||||
label = "NAND (RO) U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 1MB for DTB Image */
|
||||
reg = <0x00100000 0x00100000>;
|
||||
label = "NAND (RO) DTB Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00200000 0x00400000>;
|
||||
label = "NAND (RO) Linux Kernel Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
/* 4MB for Compressed Root file System Image */
|
||||
reg = <0x00600000 0x00400000>;
|
||||
label = "NAND (RO) Compressed RFS Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
/* 7MB for JFFS2 based Root file System */
|
||||
reg = <0x00a00000 0x00700000>;
|
||||
label = "NAND (RW) JFFS2 Root File System";
|
||||
};
|
||||
|
||||
partition@1100000 {
|
||||
/* 15MB for JFFS2 based Root file System */
|
||||
reg = <0x01100000 0x00f00000>;
|
||||
label = "NAND (RW) Writable User area";
|
||||
};
|
||||
};
|
||||
|
||||
L2switch@2,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "vitesse-7385";
|
||||
reg = <0x2 0x0 0x20000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1020-immr", "simple-bus";
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1020-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1020-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
cell-index = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,espi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <59 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
mode = "cpu";
|
||||
|
||||
fsl_m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,espi-flash";
|
||||
reg = <0>;
|
||||
linux,modalias = "fsl_m25p80";
|
||||
modal = "s25sl128b";
|
||||
spi-max-frequency = <50000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00080000>;
|
||||
label = "SPI (RO) U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
/* 512KB for DTB Image */
|
||||
reg = <0x00080000 0x00080000>;
|
||||
label = "SPI (RO) DTB Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00100000 0x00400000>;
|
||||
label = "SPI (RO) Linux Kernel Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@500000 {
|
||||
/* 4MB for Compressed RFS Image */
|
||||
reg = <0x00500000 0x00400000>;
|
||||
label = "SPI (RO) Compressed RFS Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
/* 7MB for JFFS2 based RFS */
|
||||
reg = <0x00900000 0x00700000>;
|
||||
label = "SPI (RW) JFFS2 RFS";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8572-gpio";
|
||||
reg = <0xf000 0x100>;
|
||||
interrupts = <47 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1020-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2,256K
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0x21300 0x4>;
|
||||
ranges = <0x0 0x21100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <20 2>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <21 2>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <22 2>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <23 2>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x22000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <28 0x2>;
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
usb@23000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x23000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <46 0x2>;
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
compatible = "fsl,p1020-esdhc", "fsl,esdhc";
|
||||
reg = <0x2e000 0x1000>;
|
||||
interrupts = <72 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
/* Filled in by U-Boot */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
|
||||
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 58 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0xbfe>;
|
||||
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "chrp,open-pic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
compatible = "fsl,p1020-msi", "fsl,mpic-msi";
|
||||
reg = <0x41600 0x80>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0
|
||||
0xe1 0
|
||||
0xe2 0
|
||||
0xe3 0
|
||||
0xe4 0
|
||||
0xe5 0
|
||||
0xe6 0
|
||||
0xe7 0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
compatible = "fsl,p1020-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xc0000000
|
||||
0x2000000 0x0 0xc0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -121,6 +121,7 @@ static int __init mpc85xxrdb_publish_devices(void)
|
||||
return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
|
||||
}
|
||||
machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
|
||||
machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
@ -134,6 +135,15 @@ static int __init p2020_rdb_probe(void)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __init p1020_rdb_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P1020RDB"))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(p2020_rdb) {
|
||||
.name = "P2020 RDB",
|
||||
.probe = p2020_rdb_probe,
|
||||
@ -147,3 +157,17 @@ define_machine(p2020_rdb) {
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
|
||||
define_machine(p1020_rdb) {
|
||||
.name = "P1020 RDB",
|
||||
.probe = p1020_rdb_probe,
|
||||
.setup_arch = mpc85xx_rdb_setup_arch,
|
||||
.init_IRQ = mpc85xx_rdb_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
.get_irq = mpic_get_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user