mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
ARM: dts: am5729: beaglebone-ai: adding device tree
BeagleBoard.org BeagleBone AI is an open source hardware single board computer based on the Texas Instruments AM5729 SoC featuring dual-core 1.5GHz Arm Cortex-A15 processor, dual-core C66 digital signal processor (DSP), quad-core embedded vision engine (EVE), Arm Cortex-M4 processors, dual programmable realtime unit industrial control subsystems and more. The board features 1GB DDR3L, USB3.0 Type-C, USB HS Type-A, microHDMI, 16GB eMMC flash, 1G Ethernet, 802.11ac 2/5GHz, Bluetooth, and BeagleBone expansion headers. For more information, refer to: https://beaglebone.ai This patch introduces the BeagleBone AI device tree. Note that the device use the "ti,tpd12s016" component which is software compatible with "ti,tpd12s015". Thus we only use the latter driver. Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Jason Kridner
Tony Lindgren
parent
8f3d9f3542
commit
520557d485
@ -832,6 +832,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
|
||||
am57xx-beagle-x15.dtb \
|
||||
am57xx-beagle-x15-revb1.dtb \
|
||||
am57xx-beagle-x15-revc.dtb \
|
||||
am5729-beagleboneai.dtb \
|
||||
am57xx-cl-som-am57x.dtb \
|
||||
am57xx-sbc-am57x.dtb \
|
||||
am572x-idk.dtb \
|
||||
|
||||
731
arch/arm/boot/dts/am5729-beagleboneai.dts
Normal file
731
arch/arm/boot/dts/am5729-beagleboneai.dts
Normal file
@ -0,0 +1,731 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "dra74x.dtsi"
|
||||
#include "am57xx-commercial-grade.dtsi"
|
||||
#include "dra74x-mmc-iodelay.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pinctrl/dra.h>
|
||||
|
||||
/ {
|
||||
model = "BeagleBoard.org BeagleBone AI";
|
||||
compatible = "beagle,am5729-beagleboneai", "ti,am5728",
|
||||
"ti,dra742", "ti,dra74", "ti,dra7";
|
||||
|
||||
aliases {
|
||||
rtc0 = &tps659038_rtc;
|
||||
rtc1 = &rtc;
|
||||
display0 = &hdmi_conn;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
ipu2_memory_region: ipu2-memory@95800000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x0 0x95800000 0x0 0x3800000>;
|
||||
reusable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
dsp1_memory_region: dsp1-memory@99000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x0 0x99000000 0x0 0x4000000>;
|
||||
reusable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ipu1_memory_region: ipu1-memory@9d000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x0 0x9d000000 0x0 0x2000000>;
|
||||
reusable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
dsp2_memory_region: dsp2-memory@9f000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x0 0x9f000000 0x0 0x800000>;
|
||||
reusable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
vdd_adc: gpioregulator-vdd_adc {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "vdd_adc";
|
||||
vin-supply = <&vdd_5v>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
|
||||
states = <1800000 0
|
||||
3300000 1>;
|
||||
};
|
||||
|
||||
vdd_5v: fixedregulator-vdd_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vtt_fixed: fixedregulator-vtt {
|
||||
/* TPS51200 */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vtt_fixed";
|
||||
vin-supply = <&vdd_ddr>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0 {
|
||||
label = "beaglebone:green:usr0";
|
||||
gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "beaglebone:green:usr1";
|
||||
gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "beaglebone:green:usr2";
|
||||
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "cpu";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "beaglebone:green:usr3";
|
||||
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc1";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led4 {
|
||||
label = "beaglebone:green:usr4";
|
||||
gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "netdev";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_conn: connector@0 {
|
||||
compatible = "hdmi-connector";
|
||||
label = "hdmi";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_encoder_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_enc: encoder@0 {
|
||||
/* "ti,tpd12s016" software compatible with "ti,tpd12s015"
|
||||
* no need for individual driver
|
||||
*/
|
||||
compatible = "ti,tpd12s015";
|
||||
gpios = <0>,
|
||||
<0>,
|
||||
<&gpio7 12 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0x0>;
|
||||
|
||||
hdmi_encoder_in: endpoint@0 {
|
||||
remote-endpoint = <&hdmi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <0x1>;
|
||||
|
||||
hdmi_encoder_out: endpoint@0 {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc_pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
brcmf_pwrseq: brcmf_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>, /* BT-REG-ON */
|
||||
<&gpio3 18 GPIO_ACTIVE_LOW>; /* WL-REG-ON */
|
||||
};
|
||||
|
||||
extcon_usb1: extcon_usb1 {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
ti,enable-id-detection;
|
||||
id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps659038: tps659038@58 {
|
||||
compatible = "ti,tps659038";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
||||
ti,system-power-controller;
|
||||
ti,palmas-override-powerhold;
|
||||
|
||||
tps659038_pmic {
|
||||
compatible = "ti,tps659038-pmic";
|
||||
|
||||
smps12-in-supply = <&vdd_5v>;
|
||||
smps3-in-supply = <&vdd_5v>;
|
||||
smps45-in-supply = <&vdd_5v>;
|
||||
smps6-in-supply = <&vdd_5v>;
|
||||
smps7-in-supply = <&vdd_5v>;
|
||||
mps3-in-supply = <&vdd_5v>;
|
||||
smps8-in-supply = <&vdd_5v>;
|
||||
smps9-in-supply = <&vdd_5v>;
|
||||
ldo1-in-supply = <&vdd_5v>;
|
||||
ldo2-in-supply = <&vdd_5v>;
|
||||
ldo3-in-supply = <&vdd_5v>;
|
||||
ldo4-in-supply = <&vdd_5v>;
|
||||
ldo9-in-supply = <&vdd_5v>;
|
||||
ldoln-in-supply = <&vdd_5v>;
|
||||
ldousb-in-supply = <&vdd_5v>;
|
||||
ldortc-in-supply = <&vdd_5v>;
|
||||
|
||||
regulators {
|
||||
vdd_mpu: smps12 {
|
||||
/* VDD_MPU */
|
||||
regulator-name = "smps12";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_ddr: smps3 {
|
||||
/* VDD_DDR EMIF1 EMIF2 */
|
||||
regulator-name = "smps3";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_dspeve: smps45 {
|
||||
/* VDD_DSPEVE on AM572 */
|
||||
regulator-name = "smps45";
|
||||
regulator-min-microvolt = < 850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_gpu: smps6 {
|
||||
/* VDD_GPU */
|
||||
regulator-name = "smps6";
|
||||
regulator-min-microvolt = < 850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_core: smps7 {
|
||||
/* VDD_CORE */
|
||||
regulator-name = "smps7";
|
||||
regulator-min-microvolt = < 850000>; /*** 1.15V */
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_iva: smps8 {
|
||||
/* VDD_IVAHD */ /*** 1.06V */
|
||||
regulator-name = "smps8";
|
||||
};
|
||||
|
||||
vdd_3v3: smps9 {
|
||||
/* VDD_3V3 */
|
||||
regulator-name = "smps9";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_sd: ldo1 {
|
||||
/* VDDSHV8 - VSDMMC */
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_1v8: ldo2 {
|
||||
/* VDDSH18V */
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_1v8_phy_ldo3: ldo3 {
|
||||
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_1v8_phy_ldo4: ldo4 {
|
||||
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* LDO5-8 unused */
|
||||
|
||||
vdd_rtc: ldo9 {
|
||||
/* VDD_RTC */
|
||||
regulator-name = "ldo9";
|
||||
regulator-min-microvolt = < 840000>;
|
||||
regulator-max-microvolt = <1160000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_1v8_pll: ldoln {
|
||||
/* VDDA_1V8_PLL */
|
||||
regulator-name = "ldoln";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldousb_reg: ldousb {
|
||||
/* VDDA_3V_USB: VDDA_USBHS33 */
|
||||
regulator-name = "ldousb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldortc_reg: ldortc {
|
||||
/* VDDA_RTC */
|
||||
regulator-name = "ldortc";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
regen1: regen1 {
|
||||
/* VDD_3V3_ON */
|
||||
regulator-name = "regen1";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regen2: regen2 {
|
||||
/* Needed for PMIC internal resource */
|
||||
regulator-name = "regen2";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tps659038_rtc: tps659038_rtc {
|
||||
compatible = "ti,palmas-rtc";
|
||||
interrupt-parent = <&tps659038>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
tps659038_pwr_button: tps659038_pwr_button {
|
||||
compatible = "ti,palmas-pwrbutton";
|
||||
interrupt-parent = <&tps659038>;
|
||||
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
||||
wakeup-source;
|
||||
ti,palmas-long-press-seconds = <12>;
|
||||
};
|
||||
|
||||
tps659038_gpio: tps659038_gpio {
|
||||
compatible = "ti,palmas-gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
/* STMPE811 touch screen controller */
|
||||
stmpe811@41 {
|
||||
compatible = "st,stmpe811";
|
||||
reg = <0x41>;
|
||||
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupt-controller;
|
||||
id = <0>;
|
||||
blocks = <0x5>;
|
||||
irq-trigger = <0x1>;
|
||||
st,mod-12b = <1>; /* 12-bit ADC */
|
||||
st,ref-sel = <0>; /* internal ADC reference */
|
||||
st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
|
||||
st,sample-time = <4>; /* ADC converstion time: 80 clocks */
|
||||
|
||||
stmpe_adc {
|
||||
compatible = "st,stmpe-adc";
|
||||
st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
|
||||
adc0: iio-device@0 {
|
||||
#io-channel-cells = <1>;
|
||||
iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
|
||||
iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
|
||||
"AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
|
||||
};
|
||||
};
|
||||
|
||||
stmpe_touchscreen {
|
||||
status = "disabled";
|
||||
compatible = "st,stmpe-ts";
|
||||
/* 8 sample average control */
|
||||
st,ave-ctrl = <3>;
|
||||
/* 7 length fractional part in z */
|
||||
st,fraction-z = <7>;
|
||||
/*
|
||||
* 50 mA typical 80 mA max touchscreen drivers
|
||||
* current limit value
|
||||
*/
|
||||
st,i-drive = <1>;
|
||||
/* 1 ms panel driver settling time */
|
||||
st,settling = <3>;
|
||||
/* 5 ms touch detect interrupt delay */
|
||||
st,touch-det-delay = <5>;
|
||||
};
|
||||
|
||||
stmpe_gpio {
|
||||
compatible = "st,stmpe-gpio";
|
||||
};
|
||||
|
||||
stmpe_pwm {
|
||||
compatible = "st,stmpe-pwm";
|
||||
#pwm-cells = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mcspi3 {
|
||||
status = "okay";
|
||||
ti,pindir-d0-out-d1-in;
|
||||
|
||||
sn65hvs882: sn65hvs882@0 {
|
||||
compatible = "pisosr-gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpol;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
vdd-supply = <&vdd_mpu>;
|
||||
voltage-tolerance = <1>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <2>;
|
||||
|
||||
phy0: ethernet-phy@1 {
|
||||
reg = <4>;
|
||||
eee-broken-100tx;
|
||||
eee-broken-1000t;
|
||||
};
|
||||
};
|
||||
|
||||
&mac {
|
||||
slaves = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&ocp {
|
||||
pruss1_shmem: pruss_shmem@4b200000 {
|
||||
status = "okay";
|
||||
compatible = "ti,pruss-shmem";
|
||||
reg = <0x4b200000 0x020000>;
|
||||
};
|
||||
|
||||
pruss2_shmem: pruss_shmem@4b280000 {
|
||||
status = "okay";
|
||||
compatible = "ti,pruss-shmem";
|
||||
reg = <0x4b280000 0x020000>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&vdd_3v3>;
|
||||
vqmmc-supply = <&vdd_sd>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins_default>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&vdd_1v8>;
|
||||
vqmmc-supply = <&vdd_1v8>;
|
||||
bus-width = <8>;
|
||||
ti,non-removable;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
|
||||
ti,needs-special-reset;
|
||||
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
};
|
||||
|
||||
&mmc4 {
|
||||
/* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
|
||||
/* HS: High speed up to 50 MHz (3.3 V signaling). */
|
||||
/* SDR12: SDR up to 25 MHz (1.8 V signaling). */
|
||||
/* SDR25: SDR up to 50 MHz (1.8 V signaling). */
|
||||
/* SDR50: SDR up to 100 MHz (1.8 V signaling). */
|
||||
/* SDR104: SDR up to 208 MHz (1.8 V signaling) */
|
||||
/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
|
||||
status = "okay";
|
||||
|
||||
ti,needs-special-reset;
|
||||
vmmc-supply = <&vdd_3v3>;
|
||||
cap-power-off-card;
|
||||
keep-power-in-suspend;
|
||||
bus-width = <4>;
|
||||
ti,non-removable;
|
||||
non-removable;
|
||||
no-1-8-v;
|
||||
max-frequency = <24000000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
mmc-pwrseq = <&brcmf_pwrseq>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
status = "okay";
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
|
||||
brcm,sd-head-align = <4>;
|
||||
brcm,sd_head_align = <4>;
|
||||
brcm,sd_sgentry_align = <512>;
|
||||
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "host-wake";
|
||||
};
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
phy-supply = <&ldousb_reg>;
|
||||
};
|
||||
|
||||
&usb2_phy2 {
|
||||
phy-supply = <&ldousb_reg>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&omap_dwc3_1 {
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "okay";
|
||||
vdda_video-supply = <&vdd_1v8_pll>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
vdda-supply = <&vdd_1v8_phy_ldo4>;
|
||||
|
||||
port {
|
||||
hdmi_out: endpoint {
|
||||
remote-endpoint = <&hdmi_encoder_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&bandgap {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox12 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mailbox13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_alert0 {
|
||||
temperature = <55000>; /* milliCelsius */
|
||||
};
|
||||
|
||||
&cpu_crit {
|
||||
temperature = <85000>; /* milliCelsius */
|
||||
};
|
||||
|
||||
&gpu_crit {
|
||||
temperature = <85000>; /* milliCelsius */
|
||||
};
|
||||
|
||||
&core_crit {
|
||||
temperature = <85000>; /* milliCelsius */
|
||||
};
|
||||
|
||||
&dspeve_crit {
|
||||
temperature = <85000>; /* milliCelsius */
|
||||
};
|
||||
|
||||
&iva_crit {
|
||||
temperature = <85000>; /* milliCelsius */
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* bluetooth */
|
||||
&uart6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* cape header stuff */
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&cpu0_opp_table {
|
||||
opp_slow-500000000 {
|
||||
opp-shared;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user