mt2712 - add spi slave node

mt7622:
 - add timer node
 - add CCI node
 - add PMU node
 - add bluetooth node
 - add SPI slave node
 - fix reference board (rfb1) memory and sort node alphabetically
 - add support for Bananapi-R64
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAluvglMXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00Pnzg//Ygw/So3J9SQNxPyKyk9uoKAy
 jyhdWiy0/QUMfDSeLcDTwYRqmdb/Ofmw6PYxG6MouNmxDW6/Nlt4uYjBGgJy7w5a
 eN0oonhZTANSSduve2SX4RmKH9RasM2+YCMVWnwHH2SLKEiOEytUATKQYzoPw4gh
 JgkErAL9otGSPRMLIcgRcOnL700k1yBGERwOb3+0CYTWbPAbiuF34UVkeYt/CVID
 CxyY8Pi6vHkk6MmcsCa6jFY1+YoZQhOwR6FDk2dahYBStYFF37NtRcPv+ea9+t6k
 PhN1QeNJ7NJuRmfTgffHgBTkap3qBQjJyK3Bgc+88yi1d1Giuy1vRJfxmtK2thzt
 OP4MOD/t4hrV6tOrZ1V0ztVyQZCAYDEopM9XXe0o5Nb9dR9+Q+MRvb2VdgCBNT1F
 1lWwiZZtFNFzMPdNrC4fwhAPTM/9VBghCc2drxbizy2BtobDkkQK5/A7/UbHIVR5
 AV2HLPvCac27BbbYiSYemv5quSuBGVy4JoMhatKMwE7F798NLHipcanNpHVQR86n
 BvwQpglWgIjomDgu83LkaJZgs07esa5y1TJJpzJ0o8kAn13FgzK0UdiYeNy5Rprz
 sy+KzWy0PoL4yladowIFZRnFzkgXd+F00gZKKNdAdY04ZUp5CaDn0GVt9WqCkDwr
 Z+O3Budk3jyNRpF+Nv4=
 =ySpY
 -----END PGP SIGNATURE-----

Merge tag 'v4.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt

mt2712 - add spi slave node

mt7622:
- add timer node
- add CCI node
- add PMU node
- add bluetooth node
- add SPI slave node
- fix reference board (rfb1) memory and sort node alphabetically
- add support for Bananapi-R64

* tag 'v4.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: Add spi slave dts
  arm64: dts: mt7622: add bananapi BPI-R64 board
  arm64: dts: mt7622: fix ram size for rfb1
  arm64: dts: mt7622: add a bluetooth 5 device node
  arm64: dts: mt7622: add timer, CCI-400 and PMU nodes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2018-10-02 11:13:38 +02:00
commit 508b330b82
5 changed files with 702 additions and 98 deletions

View File

@ -5,4 +5,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb

View File

@ -301,6 +301,17 @@ uart5: serial@1000f000 {
status = "disabled"; status = "disabled";
}; };
spis1: spi@10013000 {
compatible = "mediatek,mt2712-spi-slave";
reg = <0 0x10013000 0 0x100>;
interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_AO_SPI1>;
clock-names = "spi";
assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
status = "disabled";
};
apmixedsys: syscon@10209000 { apmixedsys: syscon@10209000 {
compatible = "mediatek,mt2712-apmixedsys", "syscon"; compatible = "mediatek,mt2712-apmixedsys", "syscon";
reg = <0 0x10209000 0 0x1000>; reg = <0 0x10209000 0 0x1000>;

View File

@ -0,0 +1,530 @@
/*
* Copyright (c) 2018 MediaTek Inc.
* Author: Ryder Lee <ryder.lee@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
/ {
model = "Bananapi BPI-R64";
compatible = "bananapi,bpi-r64", "mediatek,mt7622";
chosen {
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
};
cpus {
cpu@0 {
proc-supply = <&mt6380_vcpu_reg>;
sram-supply = <&mt6380_vm_reg>;
};
cpu@1 {
proc-supply = <&mt6380_vcpu_reg>;
sram-supply = <&mt6380_vm_reg>;
};
};
gpio-keys {
compatible = "gpio-keys";
factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
green {
label = "bpi-r64:pio:green";
gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red {
label = "bpi-r64:pio:red";
gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
memory {
reg = <0 0x40000000 0 0x40000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "fixed-5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
};
&bch {
status = "disabled";
};
&btif {
status = "okay";
};
&cir {
pinctrl-names = "default";
pinctrl-0 = <&irrx_pins>;
status = "okay";
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&eth_pins>;
status = "okay";
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-handle = <&phy5>;
};
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "sgmii";
};
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&emmc_pins_default>;
pinctrl-1 = <&emmc_pins_uhs>;
status = "okay";
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
non-removable;
};
&mmc1 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&sd0_pins_default>;
pinctrl-1 = <&sd0_pins_uhs>;
status = "okay";
bus-width = <4>;
max-frequency = <50000000>;
cap-sd-highspeed;
r_smpl = <1>;
cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
};
&nandc {
pinctrl-names = "default";
pinctrl-0 = <&parallel_nand_pins>;
status = "disabled";
};
&nor_flash {
pinctrl-names = "default";
pinctrl-0 = <&spi_nor_pins>;
status = "disabled";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
};
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
status = "okay";
pcie@0,0 {
status = "okay";
};
pcie@1,0 {
status = "okay";
};
};
&pio {
/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
* SATA functions. i.e. output-high: PCIe, output-low: SATA
*/
asm_sel {
gpio-hog;
gpios = <90 GPIO_ACTIVE_HIGH>;
output-high;
};
/* eMMC is shared pin with parallel NAND */
emmc_pins_default: emmc-pins-default {
mux {
function = "emmc", "emmc_rst";
groups = "emmc";
};
/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
* "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
* DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
*/
conf-cmd-dat {
pins = "NDL0", "NDL1", "NDL2",
"NDL3", "NDL4", "NDL5",
"NDL6", "NDL7", "NRB";
input-enable;
bias-pull-up;
};
conf-clk {
pins = "NCLE";
bias-pull-down;
};
};
emmc_pins_uhs: emmc-pins-uhs {
mux {
function = "emmc";
groups = "emmc";
};
conf-cmd-dat {
pins = "NDL0", "NDL1", "NDL2",
"NDL3", "NDL4", "NDL5",
"NDL6", "NDL7", "NRB";
input-enable;
drive-strength = <4>;
bias-pull-up;
};
conf-clk {
pins = "NCLE";
drive-strength = <4>;
bias-pull-down;
};
};
eth_pins: eth-pins {
mux {
function = "eth";
groups = "mdc_mdio", "rgmii_via_gmac2";
};
};
i2c1_pins: i2c1-pins {
mux {
function = "i2c";
groups = "i2c1_0";
};
};
i2c2_pins: i2c2-pins {
mux {
function = "i2c";
groups = "i2c2_0";
};
};
i2s1_pins: i2s1-pins {
mux {
function = "i2s";
groups = "i2s_out_mclk_bclk_ws",
"i2s1_in_data",
"i2s1_out_data";
};
conf {
pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
"I2S_WS", "I2S_MCLK";
drive-strength = <12>;
bias-pull-down;
};
};
irrx_pins: irrx-pins {
mux {
function = "ir";
groups = "ir_1_rx";
};
};
irtx_pins: irtx-pins {
mux {
function = "ir";
groups = "ir_1_tx";
};
};
/* Parallel nand is shared pin with eMMC */
parallel_nand_pins: parallel-nand-pins {
mux {
function = "flash";
groups = "par_nand";
};
};
pcie0_pins: pcie0-pins {
mux {
function = "pcie";
groups = "pcie0_pad_perst",
"pcie0_1_waken",
"pcie0_1_clkreq";
};
};
pcie1_pins: pcie1-pins {
mux {
function = "pcie";
groups = "pcie1_pad_perst",
"pcie1_0_waken",
"pcie1_0_clkreq";
};
};
pmic_bus_pins: pmic-bus-pins {
mux {
function = "pmic";
groups = "pmic_bus";
};
};
pwm7_pins: pwm1-2-pins {
mux {
function = "pwm";
groups = "pwm_ch7_2";
};
};
wled_pins: wled-pins {
mux {
function = "led";
groups = "wled";
};
};
sd0_pins_default: sd0-pins-default {
mux {
function = "sd";
groups = "sd_0";
};
/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
* "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
* DAT2, DAT3, CMD, CLK for SD respectively.
*/
conf-cmd-data {
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
"I2S2_IN","I2S4_OUT";
input-enable;
drive-strength = <8>;
bias-pull-up;
};
conf-clk {
pins = "I2S3_OUT";
drive-strength = <12>;
bias-pull-down;
};
conf-cd {
pins = "TXD3";
bias-pull-up;
};
};
sd0_pins_uhs: sd0-pins-uhs {
mux {
function = "sd";
groups = "sd_0";
};
conf-cmd-data {
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
"I2S2_IN","I2S4_OUT";
input-enable;
bias-pull-up;
};
conf-clk {
pins = "I2S3_OUT";
bias-pull-down;
};
};
/* Serial NAND is shared pin with SPI-NOR */
serial_nand_pins: serial-nand-pins {
mux {
function = "flash";
groups = "snfi";
};
};
spic0_pins: spic0-pins {
mux {
function = "spi";
groups = "spic0_0";
};
};
spic1_pins: spic1-pins {
mux {
function = "spi";
groups = "spic1_0";
};
};
/* SPI-NOR is shared pin with serial NAND */
spi_nor_pins: spi-nor-pins {
mux {
function = "flash";
groups = "spi_nor";
};
};
/* serial NAND is shared pin with SPI-NOR */
serial_nand_pins: serial-nand-pins {
mux {
function = "flash";
groups = "snfi";
};
};
uart0_pins: uart0-pins {
mux {
function = "uart";
groups = "uart0_0_tx_rx" ;
};
};
uart2_pins: uart2-pins {
mux {
function = "uart";
groups = "uart2_1_tx_rx" ;
};
};
watchdog_pins: watchdog-pins {
mux {
function = "watchdog";
groups = "watchdog";
};
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>;
status = "okay";
};
&pwrap {
pinctrl-names = "default";
pinctrl-0 = <&pmic_bus_pins>;
status = "okay";
};
&sata {
status = "disable";
};
&sata_phy {
status = "disable";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spic0_pins>;
status = "okay";
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spic1_pins>;
status = "okay";
};
&ssusb {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_5v>;
status = "okay";
};
&u3phy {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "okay";
};
&watchdog {
pinctrl-names = "default";
pinctrl-0 = <&watchdog_pins>;
status = "okay";
};

View File

@ -51,7 +51,7 @@ wps {
}; };
memory { memory {
reg = <0 0x40000000 0 0x3F000000>; reg = <0 0x40000000 0 0x20000000>;
}; };
reg_1p8v: regulator-1p8v { reg_1p8v: regulator-1p8v {
@ -81,6 +81,103 @@ reg_5v: regulator-5v {
}; };
}; };
&bch {
status = "disabled";
};
&btif {
status = "okay";
};
&cir {
pinctrl-names = "default";
pinctrl-0 = <&irrx_pins>;
status = "okay";
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&eth_pins>;
status = "okay";
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-handle = <&phy5>;
};
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "sgmii";
};
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&emmc_pins_default>;
pinctrl-1 = <&emmc_pins_uhs>;
status = "okay";
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
non-removable;
};
&mmc1 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&sd0_pins_default>;
pinctrl-1 = <&sd0_pins_uhs>;
status = "okay";
bus-width = <4>;
max-frequency = <50000000>;
cap-sd-highspeed;
r_smpl = <1>;
cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
};
&nandc {
pinctrl-names = "default";
pinctrl-0 = <&parallel_nand_pins>;
status = "disabled";
};
&nor_flash {
pinctrl-names = "default";
pinctrl-0 = <&spi_nor_pins>;
status = "disabled";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
};
};
&pcie { &pcie {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>; pinctrl-0 = <&pcie0_pins>;
@ -344,103 +441,6 @@ mux {
}; };
}; };
&bch {
status = "disabled";
};
&btif {
status = "okay";
};
&cir {
pinctrl-names = "default";
pinctrl-0 = <&irrx_pins>;
status = "okay";
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&eth_pins>;
status = "okay";
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-handle = <&phy5>;
};
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "sgmii";
};
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&emmc_pins_default>;
pinctrl-1 = <&emmc_pins_uhs>;
status = "okay";
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
non-removable;
};
&mmc1 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&sd0_pins_default>;
pinctrl-1 = <&sd0_pins_uhs>;
status = "okay";
bus-width = <4>;
max-frequency = <50000000>;
cap-sd-highspeed;
r_smpl = <1>;
cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
};
&nandc {
pinctrl-names = "default";
pinctrl-0 = <&parallel_nand_pins>;
status = "disabled";
};
&nor_flash {
pinctrl-names = "default";
pinctrl-0 = <&spi_nor_pins>;
status = "disabled";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
};
};
&pwm { &pwm {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>; pinctrl-0 = <&pwm7_pins>;

View File

@ -79,6 +79,7 @@ cpu0: cpu@0 {
#cooling-cells = <2>; #cooling-cells = <2>;
enable-method = "psci"; enable-method = "psci";
clock-frequency = <1300000000>; clock-frequency = <1300000000>;
cci-control-port = <&cci_control2>;
}; };
cpu1: cpu@1 { cpu1: cpu@1 {
@ -92,6 +93,7 @@ cpu1: cpu@1 {
#cooling-cells = <2>; #cooling-cells = <2>;
enable-method = "psci"; enable-method = "psci";
clock-frequency = <1300000000>; clock-frequency = <1300000000>;
cci-control-port = <&cci_control2>;
}; };
}; };
@ -113,6 +115,13 @@ psci {
method = "smc"; method = "smc";
}; };
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
interrupt-affinity = <&cpu0>, <&cpu1>;
};
reserved-memory { reserved-memory {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <2>; #size-cells = <2>;
@ -218,6 +227,16 @@ pericfg: pericfg@10002000 {
#reset-cells = <1>; #reset-cells = <1>;
}; };
timer: timer@10004000 {
compatible = "mediatek,mt7622-timer",
"mediatek,mt6577-timer";
reg = <0 0x10004000 0 0x80>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
<&topckgen CLK_TOP_RTC>;
clock-names = "system-clk", "rtc-clk";
};
scpsys: scpsys@10006000 { scpsys: scpsys@10006000 {
compatible = "mediatek,mt7622-scpsys", compatible = "mediatek,mt7622-scpsys",
"syscon"; "syscon";
@ -325,6 +344,42 @@ gic: interrupt-controller@10300000 {
<0 0x10360000 0 0x2000>; <0 0x10360000 0 0x2000>;
}; };
cci: cci@10390000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0x10390000 0 0x1000>;
ranges = <0 0 0x10390000 0x10000>;
cci_control0: slave-if@1000 {
compatible = "arm,cci-400-ctrl-if";
interface-type = "ace-lite";
reg = <0x1000 0x1000>;
};
cci_control1: slave-if@4000 {
compatible = "arm,cci-400-ctrl-if";
interface-type = "ace";
reg = <0x4000 0x1000>;
};
cci_control2: slave-if@5000 {
compatible = "arm,cci-400-ctrl-if";
interface-type = "ace";
reg = <0x5000 0x1000>;
};
pmu@9000 {
compatible = "arm,cci-400-pmu,r1";
reg = <0x9000 0x5000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
};
};
auxadc: adc@11001000 { auxadc: adc@11001000 {
compatible = "mediatek,mt7622-auxadc"; compatible = "mediatek,mt7622-auxadc";
reg = <0 0x11001000 0 0x1000>; reg = <0 0x11001000 0 0x1000>;
@ -475,6 +530,13 @@ btif: serial@1100c000 {
reg-shift = <2>; reg-shift = <2>;
reg-io-width = <4>; reg-io-width = <4>;
status = "disabled"; status = "disabled";
bluetooth {
compatible = "mediatek,mt7622-bluetooth";
power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
clocks = <&clk25m>;
clock-names = "ref";
};
}; };
nandc: nfi@1100d000 { nandc: nfi@1100d000 {