mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-14 05:26:41 +07:00
ARM: dts: imx: ventana: add LTC3676 PMIC support
All of the Gateworks Ventana boards based on the IMX6 SoC except for the GW54xx use the LTC3676 PMIC. Add a device-tree node with interrupt support for this PMIC. Additionally remove the simple-bus notation in the regulator nodes and any fixed regulators that are provided by the PMIC. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Tim Harvey
Shawn Guo
parent
b0a5c46d6f
commit
5051bff331
@ -56,38 +56,29 @@ pps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
reg_5p0v: regulator-5p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5p0v: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
@ -158,6 +149,81 @@ &i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
ltc3676: pmic@3c {
|
||||
compatible = "lltc,ltc3676";
|
||||
reg = <0x3c>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
regulators {
|
||||
/* VDD_SOC (1+R1/R2 = 1.635) */
|
||||
reg_vdd_soc: sw1 {
|
||||
regulator-name = "vddsoc";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
|
||||
reg_1p8v: sw2 {
|
||||
regulator-name = "vdd1p8";
|
||||
regulator-min-microvolt = <1033310>;
|
||||
regulator-max-microvolt = <2004000>;
|
||||
lltc,fb-voltage-divider = <301000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_ARM (1+R1/R2 = 1.635) */
|
||||
reg_vdd_arm: sw3 {
|
||||
regulator-name = "vddarm";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_DDR (1+R1/R2 = 2.105) */
|
||||
reg_vdd_ddr: sw4 {
|
||||
regulator-name = "vddddr";
|
||||
regulator-min-microvolt = <868310>;
|
||||
regulator-max-microvolt = <1684000>;
|
||||
lltc,fb-voltage-divider = <221000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
|
||||
reg_2p5v: ldo2 {
|
||||
regulator-name = "vdd2p5";
|
||||
regulator-min-microvolt = <2490375>;
|
||||
regulator-max-microvolt = <2490375>;
|
||||
lltc,fb-voltage-divider = <487000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
||||
reg_3p0v: ldo4 {
|
||||
regulator-name = "vdd3p0";
|
||||
regulator-min-microvolt = <3023250>;
|
||||
regulator-max-microvolt = <3023250>;
|
||||
lltc,fb-voltage-divider = <634000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
@ -312,6 +378,12 @@ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pps: ppsgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
|
||||
|
||||
@ -71,57 +71,37 @@ pps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg_1p0v: regulator-1p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1P0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_1p0v: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "1P0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* remove this fixed regulator once ltc3676__sw2 driver available */
|
||||
reg_1p8v: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "1P8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
reg_5p0v: regulator-5p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5p0v: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
sound {
|
||||
@ -233,6 +213,89 @@ &i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
ltc3676: pmic@3c {
|
||||
compatible = "lltc,ltc3676";
|
||||
reg = <0x3c>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
regulators {
|
||||
/* VDD_SOC (1+R1/R2 = 1.635) */
|
||||
reg_vdd_soc: sw1 {
|
||||
regulator-name = "vddsoc";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
|
||||
reg_1p8v: sw2 {
|
||||
regulator-name = "vdd1p8";
|
||||
regulator-min-microvolt = <1033310>;
|
||||
regulator-max-microvolt = <2004000>;
|
||||
lltc,fb-voltage-divider = <301000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_ARM (1+R1/R2 = 1.635) */
|
||||
reg_vdd_arm: sw3 {
|
||||
regulator-name = "vddarm";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_DDR (1+R1/R2 = 2.105) */
|
||||
reg_vdd_ddr: sw4 {
|
||||
regulator-name = "vddddr";
|
||||
regulator-min-microvolt = <868310>;
|
||||
regulator-max-microvolt = <1684000>;
|
||||
lltc,fb-voltage-divider = <221000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
|
||||
reg_2p5v: ldo2 {
|
||||
regulator-name = "vdd2p5";
|
||||
regulator-min-microvolt = <2490375>;
|
||||
regulator-max-microvolt = <2490375>;
|
||||
lltc,fb-voltage-divider = <487000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_AUD_1P8: Audio codec */
|
||||
reg_aud_1p8v: ldo3 {
|
||||
regulator-name = "vdd1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
||||
reg_3p0v: ldo4 {
|
||||
regulator-name = "vdd3p0";
|
||||
regulator-min-microvolt = <3023250>;
|
||||
regulator-max-microvolt = <3023250>;
|
||||
lltc,fb-voltage-divider = <634000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
@ -467,6 +530,12 @@ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pps: ppsgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
|
||||
|
||||
@ -72,57 +72,37 @@ pps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg_1p0v: regulator-1p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1P0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_1p0v: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "1P0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* remove when pmic 1p8 regulator available */
|
||||
reg_1p8v: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "1P8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
reg_usb_h1_vbus: regulator-usb-h1-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usb_h1_vbus: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
sound {
|
||||
@ -226,6 +206,87 @@ &i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
ltc3676: pmic@3c {
|
||||
compatible = "lltc,ltc3676";
|
||||
reg = <0x3c>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
regulators {
|
||||
/* VDD_SOC (1+R1/R2 = 1.635) */
|
||||
reg_vdd_soc: sw1 {
|
||||
regulator-name = "vddsoc";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
|
||||
reg_1p8v: sw2 {
|
||||
regulator-name = "vdd1p8";
|
||||
regulator-min-microvolt = <1033310>;
|
||||
regulator-max-microvolt = <2004000>;
|
||||
lltc,fb-voltage-divider = <301000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_ARM (1+R1/R2 = 1.635) */
|
||||
reg_vdd_arm: sw3 {
|
||||
regulator-name = "vddarm";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_DDR (1+R1/R2 = 2.105) */
|
||||
reg_vdd_ddr: sw4 {
|
||||
regulator-name = "vddddr";
|
||||
regulator-min-microvolt = <868310>;
|
||||
regulator-max-microvolt = <1684000>;
|
||||
lltc,fb-voltage-divider = <221000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
|
||||
reg_2p5v: ldo2 {
|
||||
regulator-name = "vdd2p5";
|
||||
regulator-min-microvolt = <2490375>;
|
||||
regulator-max-microvolt = <2490375>;
|
||||
lltc,fb-voltage-divider = <487000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_AUD_1P8: Audio codec */
|
||||
reg_aud_1p8v: ldo3 {
|
||||
regulator-name = "vdd1p8a";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
||||
reg_3p0v: ldo4 {
|
||||
regulator-name = "vdd3p0";
|
||||
regulator-min-microvolt = <3023250>;
|
||||
regulator-max-microvolt = <3023250>;
|
||||
lltc,fb-voltage-divider = <634000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
@ -456,6 +517,12 @@ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pps: ppsgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
|
||||
|
||||
@ -78,34 +78,25 @@ memory {
|
||||
reg = <0x10000000 0x20000000>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg_5p0v: regulator-5p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_5p0v: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
reg_usb_h1_vbus: regulator-usb-h1-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_usb_h1_vbus: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -174,6 +165,89 @@ &i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
ltc3676: pmic@3c {
|
||||
compatible = "lltc,ltc3676";
|
||||
reg = <0x3c>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
regulators {
|
||||
/* VDD_SOC (1+R1/R2 = 1.635) */
|
||||
reg_vdd_soc: sw1 {
|
||||
regulator-name = "vddsoc";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_DDR (1+R1/R2 = 2.105) */
|
||||
reg_vdd_ddr: sw2 {
|
||||
regulator-name = "vddddr";
|
||||
regulator-min-microvolt = <868310>;
|
||||
regulator-max-microvolt = <1684000>;
|
||||
lltc,fb-voltage-divider = <221000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_ARM (1+R1/R2 = 1.635) */
|
||||
reg_vdd_arm: sw3 {
|
||||
regulator-name = "vddarm";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_3P3 (1+R1/R2 = 1.281) */
|
||||
reg_3p3: sw4 {
|
||||
regulator-name = "vdd3p3";
|
||||
regulator-min-microvolt = <1880000>;
|
||||
regulator-max-microvolt = <3647000>;
|
||||
lltc,fb-voltage-divider = <200000 56200>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
|
||||
reg_1p8a: ldo2 {
|
||||
regulator-name = "vdd1p8a";
|
||||
regulator-min-microvolt = <1816125>;
|
||||
regulator-max-microvolt = <1816125>;
|
||||
lltc,fb-voltage-divider = <301000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_1P8b: HDMI In analog */
|
||||
reg_1p8b: ldo3 {
|
||||
regulator-name = "vdd1p8b";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
||||
reg_3p0: ldo4 {
|
||||
regulator-name = "vdd3p0";
|
||||
regulator-min-microvolt = <3023250>;
|
||||
regulator-max-microvolt = <3023250>;
|
||||
lltc,fb-voltage-divider = <634000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
@ -308,6 +382,12 @@ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm2: pwm2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
||||
|
||||
@ -55,37 +55,28 @@ memory {
|
||||
reg = <0x10000000 0x20000000>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg_1p0v: regulator-1p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1P0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_1p0v: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "1P0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5p0v: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
reg_5p0v: regulator-5p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
@ -148,6 +139,81 @@ &i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
ltc3676: pmic@3c {
|
||||
compatible = "lltc,ltc3676";
|
||||
reg = <0x3c>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
regulators {
|
||||
/* VDD_SOC (1+R1/R2 = 1.635) */
|
||||
reg_vdd_soc: sw1 {
|
||||
regulator-name = "vddsoc";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
|
||||
reg_1p8v: sw2 {
|
||||
regulator-name = "vdd1p8";
|
||||
regulator-min-microvolt = <1033310>;
|
||||
regulator-max-microvolt = <2004000>;
|
||||
lltc,fb-voltage-divider = <301000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_ARM (1+R1/R2 = 1.635) */
|
||||
reg_vdd_arm: sw3 {
|
||||
regulator-name = "vddarm";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_DDR (1+R1/R2 = 2.105) */
|
||||
reg_vdd_ddr: sw4 {
|
||||
regulator-name = "vddddr";
|
||||
regulator-min-microvolt = <868310>;
|
||||
regulator-max-microvolt = <1684000>;
|
||||
lltc,fb-voltage-divider = <221000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
|
||||
reg_2p5v: ldo2 {
|
||||
regulator-name = "vdd2p5";
|
||||
regulator-min-microvolt = <2490375>;
|
||||
regulator-max-microvolt = <2490375>;
|
||||
lltc,fb-voltage-divider = <487000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
||||
reg_3p0v: ldo4 {
|
||||
regulator-name = "vdd3p0";
|
||||
regulator-min-microvolt = <3023250>;
|
||||
regulator-max-microvolt = <3023250>;
|
||||
lltc,fb-voltage-divider = <634000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
@ -260,6 +326,12 @@ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm2: pwm2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
||||
|
||||
@ -92,14 +92,6 @@ pps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P0V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5p0v: regulator-5p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5P0V";
|
||||
@ -179,6 +171,89 @@ &i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
ltc3676: pmic@3c {
|
||||
compatible = "lltc,ltc3676";
|
||||
reg = <0x3c>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
regulators {
|
||||
/* VDD_SOC (1+R1/R2 = 1.635) */
|
||||
reg_vdd_soc: sw1 {
|
||||
regulator-name = "vddsoc";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_DDR (1+R1/R2 = 2.105) */
|
||||
reg_vdd_ddr: sw2 {
|
||||
regulator-name = "vddddr";
|
||||
regulator-min-microvolt = <868310>;
|
||||
regulator-max-microvolt = <1684000>;
|
||||
lltc,fb-voltage-divider = <221000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_ARM (1+R1/R2 = 1.635) */
|
||||
reg_vdd_arm: sw3 {
|
||||
regulator-name = "vddarm";
|
||||
regulator-min-microvolt = <674400>;
|
||||
regulator-max-microvolt = <1308000>;
|
||||
lltc,fb-voltage-divider = <127000 200000>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_3P3 (1+R1/R2 = 1.281) */
|
||||
reg_3p3v: sw4 {
|
||||
regulator-name = "vdd3p3";
|
||||
regulator-min-microvolt = <1880000>;
|
||||
regulator-max-microvolt = <3647000>;
|
||||
lltc,fb-voltage-divider = <200000 56200>;
|
||||
regulator-ramp-delay = <7000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
|
||||
reg_1p8a: ldo2 {
|
||||
regulator-name = "vdd1p8a";
|
||||
regulator-min-microvolt = <1816125>;
|
||||
regulator-max-microvolt = <1816125>;
|
||||
lltc,fb-voltage-divider = <301000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* VDD_1P8b: microSD VDD_1P8 */
|
||||
reg_1p8b: ldo3 {
|
||||
regulator-name = "vdd1p8b";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
||||
reg_3p0v: ldo4 {
|
||||
regulator-name = "vdd3p0";
|
||||
regulator-min-microvolt = <3023250>;
|
||||
regulator-max-microvolt = <3023250>;
|
||||
lltc,fb-voltage-divider = <634000 200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
@ -255,7 +330,6 @@ &usdhc3 {
|
||||
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||||
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -327,6 +401,12 @@ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pps: ppsgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
|
||||
|
||||
Loading…
Reference in New Issue
Block a user