mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 20:10:50 +07:00
gpio: mcp23s08: Add irq functionality for i2c chips
This adds interrupt functionality for i2c chips to the driver. They can act as a interrupt-controller and generate interrupts, if the inputs change. This is tested with a mcp23017 chip on an arm based platform. v3: - be a bit more clear that the irq functionality is also available on spi versions of the chips, but the linux driver does not support this yet v2: - some more word about irq-mirror property in binding doc - use of_read_bool instead of of_find_property for "interrupt-contrller" and "irq-mirror" - cache the "interrupt-controller" for remove function - do set the irq-mirror bit only if device is marked as interrupt-controller - do create the irq mapping and setup of irq_desc of all possible interrupts in probe path instead of in gpio_to_irq - mark gpios as in use as interrupts in irq in irq_startup and unlock it in irq_shutdown - rename virq to child_irq - remove dev argument from mcp23s08_irq_setup function - move gpiochip_add before mcp23s08_irq_setup in probe path Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Lars Poeschel
Linus Walleij
parent
785acec3ee
commit
4e47f91bf7
@ -38,12 +38,38 @@ Required device specific properties (only for SPI chips):
|
||||
removed.
|
||||
- spi-max-frequency = The maximum frequency this chip is able to handle
|
||||
|
||||
Example I2C:
|
||||
Optional properties:
|
||||
- #interrupt-cells : Should be two.
|
||||
- first cell is the pin number
|
||||
- second cell is used to specify flags.
|
||||
- interrupt-controller: Marks the device node as a interrupt controller.
|
||||
NOTE: The interrupt functionality is only supported for i2c versions of the
|
||||
chips. The spi chips can also do the interrupts, but this is not supported by
|
||||
the linux driver yet.
|
||||
|
||||
Optional device specific properties:
|
||||
- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
|
||||
with two interrupt outputs (these are the devices ending with 17 and
|
||||
those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
|
||||
IO 8-15 are bank 2. These chips have two different interrupt outputs:
|
||||
One for bank 1 and another for bank 2. If irq-mirror is set, both
|
||||
interrupts are generated regardless of the bank that an input change
|
||||
occured on. If it is not set, the interrupt are only generated for the
|
||||
bank they belong to.
|
||||
On devices with only one interrupt output this property is useless.
|
||||
|
||||
Example I2C (with interrupt):
|
||||
gpiom1: gpio@20 {
|
||||
compatible = "microchip,mcp23017";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x20>;
|
||||
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells=<2>;
|
||||
microchip,irq-mirror;
|
||||
};
|
||||
|
||||
Example SPI:
|
||||
|
||||
@ -722,6 +722,7 @@ config GPIO_MCP23S08
|
||||
SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
|
||||
I/O expanders.
|
||||
This provides a GPIO interface supporting inputs and outputs.
|
||||
The I2C versions of the chips can be used as interrupt-controller.
|
||||
|
||||
config GPIO_MC33880
|
||||
tristate "Freescale MC33880 high-side/low-side switch"
|
||||
|
||||
@ -1,5 +1,13 @@
|
||||
/*
|
||||
* MCP23S08 SPI/GPIO gpio expander driver
|
||||
* MCP23S08 SPI/I2C GPIO gpio expander driver
|
||||
*
|
||||
* The inputs and outputs of the mcp23s08, mcp23s17, mcp23008 and mcp23017 are
|
||||
* supported.
|
||||
* For the I2C versions of the chips (mcp23008 and mcp23017) generation of
|
||||
* interrupts is also supported.
|
||||
* The hardware of the SPI versions of the chips (mcp23s08 and mcp23s17) is
|
||||
* also capable of generating interrupts, but the linux driver does not
|
||||
* support that yet.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
@ -12,7 +20,8 @@
|
||||
#include <linux/spi/mcp23s08.h>
|
||||
#include <linux/slab.h>
|
||||
#include <asm/byteorder.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/of_device.h>
|
||||
|
||||
/**
|
||||
@ -34,6 +43,7 @@
|
||||
#define MCP_DEFVAL 0x03
|
||||
#define MCP_INTCON 0x04
|
||||
#define MCP_IOCON 0x05
|
||||
# define IOCON_MIRROR (1 << 6)
|
||||
# define IOCON_SEQOP (1 << 5)
|
||||
# define IOCON_HAEN (1 << 3)
|
||||
# define IOCON_ODR (1 << 2)
|
||||
@ -57,8 +67,14 @@ struct mcp23s08 {
|
||||
u8 addr;
|
||||
|
||||
u16 cache[11];
|
||||
u16 irq_rise;
|
||||
u16 irq_fall;
|
||||
int irq;
|
||||
bool irq_controller;
|
||||
/* lock protects the cached values */
|
||||
struct mutex lock;
|
||||
struct mutex irq_lock;
|
||||
struct irq_domain *irq_domain;
|
||||
|
||||
struct gpio_chip chip;
|
||||
|
||||
@ -77,6 +93,11 @@ struct mcp23s08_driver_data {
|
||||
struct mcp23s08 chip[];
|
||||
};
|
||||
|
||||
/* This lock class tells lockdep that GPIO irqs are in a different
|
||||
* category than their parents, so it won't report false recursion.
|
||||
*/
|
||||
static struct lock_class_key gpio_lock_class;
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
#if IS_ENABLED(CONFIG_I2C)
|
||||
@ -315,6 +336,195 @@ mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
|
||||
return status;
|
||||
}
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
static irqreturn_t mcp23s08_irq(int irq, void *data)
|
||||
{
|
||||
struct mcp23s08 *mcp = data;
|
||||
int intcap, intf, i;
|
||||
unsigned int child_irq;
|
||||
|
||||
mutex_lock(&mcp->lock);
|
||||
intf = mcp->ops->read(mcp, MCP_INTF);
|
||||
if (intf < 0) {
|
||||
mutex_unlock(&mcp->lock);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
mcp->cache[MCP_INTF] = intf;
|
||||
|
||||
intcap = mcp->ops->read(mcp, MCP_INTCAP);
|
||||
if (intcap < 0) {
|
||||
mutex_unlock(&mcp->lock);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
mcp->cache[MCP_INTCAP] = intcap;
|
||||
mutex_unlock(&mcp->lock);
|
||||
|
||||
|
||||
for (i = 0; i < mcp->chip.ngpio; i++) {
|
||||
if ((BIT(i) & mcp->cache[MCP_INTF]) &&
|
||||
((BIT(i) & intcap & mcp->irq_rise) ||
|
||||
(mcp->irq_fall & ~intcap & BIT(i)))) {
|
||||
child_irq = irq_find_mapping(mcp->irq_domain, i);
|
||||
handle_nested_irq(child_irq);
|
||||
}
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int mcp23s08_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip);
|
||||
|
||||
return irq_find_mapping(mcp->irq_domain, offset);
|
||||
}
|
||||
|
||||
static void mcp23s08_irq_mask(struct irq_data *data)
|
||||
{
|
||||
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
||||
unsigned int pos = data->hwirq;
|
||||
|
||||
mcp->cache[MCP_GPINTEN] &= ~BIT(pos);
|
||||
}
|
||||
|
||||
static void mcp23s08_irq_unmask(struct irq_data *data)
|
||||
{
|
||||
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
||||
unsigned int pos = data->hwirq;
|
||||
|
||||
mcp->cache[MCP_GPINTEN] |= BIT(pos);
|
||||
}
|
||||
|
||||
static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
|
||||
{
|
||||
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
||||
unsigned int pos = data->hwirq;
|
||||
int status = 0;
|
||||
|
||||
if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
|
||||
mcp->cache[MCP_INTCON] &= ~BIT(pos);
|
||||
mcp->irq_rise |= BIT(pos);
|
||||
mcp->irq_fall |= BIT(pos);
|
||||
} else if (type & IRQ_TYPE_EDGE_RISING) {
|
||||
mcp->cache[MCP_INTCON] &= ~BIT(pos);
|
||||
mcp->irq_rise |= BIT(pos);
|
||||
mcp->irq_fall &= ~BIT(pos);
|
||||
} else if (type & IRQ_TYPE_EDGE_FALLING) {
|
||||
mcp->cache[MCP_INTCON] &= ~BIT(pos);
|
||||
mcp->irq_rise &= ~BIT(pos);
|
||||
mcp->irq_fall |= BIT(pos);
|
||||
} else
|
||||
return -EINVAL;
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
static void mcp23s08_irq_bus_lock(struct irq_data *data)
|
||||
{
|
||||
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
||||
|
||||
mutex_lock(&mcp->irq_lock);
|
||||
}
|
||||
|
||||
static void mcp23s08_irq_bus_unlock(struct irq_data *data)
|
||||
{
|
||||
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
||||
|
||||
mutex_lock(&mcp->lock);
|
||||
mcp->ops->write(mcp, MCP_GPINTEN, mcp->cache[MCP_GPINTEN]);
|
||||
mcp->ops->write(mcp, MCP_DEFVAL, mcp->cache[MCP_DEFVAL]);
|
||||
mcp->ops->write(mcp, MCP_INTCON, mcp->cache[MCP_INTCON]);
|
||||
mutex_unlock(&mcp->lock);
|
||||
mutex_unlock(&mcp->irq_lock);
|
||||
}
|
||||
|
||||
static unsigned int mcp23s08_irq_startup(struct irq_data *data)
|
||||
{
|
||||
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
||||
|
||||
if (gpio_lock_as_irq(&mcp->chip, data->hwirq))
|
||||
dev_err(mcp->chip.dev,
|
||||
"unable to lock HW IRQ %lu for IRQ usage\n",
|
||||
data->hwirq);
|
||||
|
||||
mcp23s08_irq_unmask(data);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void mcp23s08_irq_shutdown(struct irq_data *data)
|
||||
{
|
||||
struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data);
|
||||
|
||||
mcp23s08_irq_mask(data);
|
||||
gpio_unlock_as_irq(&mcp->chip, data->hwirq);
|
||||
}
|
||||
|
||||
static struct irq_chip mcp23s08_irq_chip = {
|
||||
.name = "gpio-mcp23xxx",
|
||||
.irq_mask = mcp23s08_irq_mask,
|
||||
.irq_unmask = mcp23s08_irq_unmask,
|
||||
.irq_set_type = mcp23s08_irq_set_type,
|
||||
.irq_bus_lock = mcp23s08_irq_bus_lock,
|
||||
.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock,
|
||||
.irq_startup = mcp23s08_irq_startup,
|
||||
.irq_shutdown = mcp23s08_irq_shutdown,
|
||||
};
|
||||
|
||||
static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
|
||||
{
|
||||
struct gpio_chip *chip = &mcp->chip;
|
||||
int err, irq, j;
|
||||
|
||||
mutex_init(&mcp->irq_lock);
|
||||
|
||||
mcp->irq_domain = irq_domain_add_linear(chip->of_node, chip->ngpio,
|
||||
&irq_domain_simple_ops, mcp);
|
||||
if (!mcp->irq_domain)
|
||||
return -ENODEV;
|
||||
|
||||
err = devm_request_threaded_irq(chip->dev, mcp->irq, NULL, mcp23s08_irq,
|
||||
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
||||
dev_name(chip->dev), mcp);
|
||||
if (err != 0) {
|
||||
dev_err(chip->dev, "unable to request IRQ#%d: %d\n",
|
||||
mcp->irq, err);
|
||||
return err;
|
||||
}
|
||||
|
||||
chip->to_irq = mcp23s08_gpio_to_irq;
|
||||
|
||||
for (j = 0; j < mcp->chip.ngpio; j++) {
|
||||
irq = irq_create_mapping(mcp->irq_domain, j);
|
||||
irq_set_lockdep_class(irq, &gpio_lock_class);
|
||||
irq_set_chip_data(irq, mcp);
|
||||
irq_set_chip(irq, &mcp23s08_irq_chip);
|
||||
irq_set_nested_thread(irq, true);
|
||||
#ifdef CONFIG_ARM
|
||||
set_irq_flags(irq, IRQF_VALID);
|
||||
#else
|
||||
irq_set_noprobe(irq);
|
||||
#endif
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void mcp23s08_irq_teardown(struct mcp23s08 *mcp)
|
||||
{
|
||||
unsigned int irq, i;
|
||||
|
||||
free_irq(mcp->irq, mcp);
|
||||
|
||||
for (i = 0; i < mcp->chip.ngpio; i++) {
|
||||
irq = irq_find_mapping(mcp->irq_domain, i);
|
||||
if (irq > 0)
|
||||
irq_dispose_mapping(irq);
|
||||
}
|
||||
|
||||
irq_domain_remove(mcp->irq_domain);
|
||||
}
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
@ -370,10 +580,11 @@ static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
|
||||
void *data, unsigned addr,
|
||||
unsigned type, unsigned base, unsigned pullups)
|
||||
void *data, unsigned addr, unsigned type,
|
||||
unsigned base, unsigned pullups)
|
||||
{
|
||||
int status;
|
||||
bool mirror = false;
|
||||
|
||||
mutex_init(&mcp->lock);
|
||||
|
||||
@ -432,13 +643,25 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
|
||||
/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
|
||||
* and MCP_IOCON.HAEN = 1, so we work with all chips.
|
||||
*/
|
||||
|
||||
status = mcp->ops->read(mcp, MCP_IOCON);
|
||||
if (status < 0)
|
||||
goto fail;
|
||||
if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) {
|
||||
|
||||
mcp->irq_controller = of_property_read_bool(mcp->chip.of_node,
|
||||
"interrupt-controller");
|
||||
if (mcp->irq && mcp->irq_controller && (type == MCP_TYPE_017))
|
||||
mirror = of_property_read_bool(mcp->chip.of_node,
|
||||
"microchip,irq-mirror");
|
||||
|
||||
if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror) {
|
||||
/* mcp23s17 has IOCON twice, make sure they are in sync */
|
||||
status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
|
||||
status |= IOCON_HAEN | (IOCON_HAEN << 8);
|
||||
status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8));
|
||||
if (mirror)
|
||||
status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
|
||||
|
||||
status = mcp->ops->write(mcp, MCP_IOCON, status);
|
||||
if (status < 0)
|
||||
goto fail;
|
||||
@ -470,6 +693,16 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
|
||||
}
|
||||
|
||||
status = gpiochip_add(&mcp->chip);
|
||||
if (status < 0)
|
||||
goto fail;
|
||||
|
||||
if (mcp->irq && mcp->irq_controller) {
|
||||
status = mcp23s08_irq_setup(mcp);
|
||||
if (status) {
|
||||
mcp23s08_irq_teardown(mcp);
|
||||
goto fail;
|
||||
}
|
||||
}
|
||||
fail:
|
||||
if (status < 0)
|
||||
dev_dbg(dev, "can't setup chip %d, --> %d\n",
|
||||
@ -546,6 +779,7 @@ static int mcp230xx_probe(struct i2c_client *client,
|
||||
if (match || !pdata) {
|
||||
base = -1;
|
||||
pullups = 0;
|
||||
client->irq = irq_of_parse_and_map(client->dev.of_node, 0);
|
||||
} else {
|
||||
if (!gpio_is_valid(pdata->base)) {
|
||||
dev_dbg(&client->dev, "invalid platform data\n");
|
||||
@ -559,6 +793,7 @@ static int mcp230xx_probe(struct i2c_client *client,
|
||||
if (!mcp)
|
||||
return -ENOMEM;
|
||||
|
||||
mcp->irq = client->irq;
|
||||
status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
|
||||
id->driver_data, base, pullups);
|
||||
if (status)
|
||||
@ -579,6 +814,9 @@ static int mcp230xx_remove(struct i2c_client *client)
|
||||
struct mcp23s08 *mcp = i2c_get_clientdata(client);
|
||||
int status;
|
||||
|
||||
if (client->irq && mcp->irq_controller)
|
||||
mcp23s08_irq_teardown(mcp);
|
||||
|
||||
status = gpiochip_remove(&mcp->chip);
|
||||
if (status == 0)
|
||||
kfree(mcp);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user