mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-13 02:56:44 +07:00
ARM: dts: imx6: Add Savageboard common file
* Memory
memblock for DDR3 1GB
* Regulator
3.3V for panel and backlight.
* Display
Enable HDMI and LVDS panel. Savageboard supports AVIC TM097TDH02 panel
which is compatible with Hannstar HSD100PXN1, so reuse it.
* Clock
The commit d28be499c4 ("ARM: dts: imx6qdl-sabresd: Allow HDMI and
LVDS to work simultaneously") is applied to support LVDS and HDMI output
at the same time.
* Pinmux
Support eMMC, ethernet, gpio key for power button, I2C, PWM, SD card
and UART.
* Others
Enable ethernet, UART1 debug, USB host, USDHC3 for microSD card and
USDHC4 for built-in eMMC storage.
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Milo Kim
Shawn Guo
parent
042f6d9826
commit
4a9c1f7cb4
255
arch/arm/boot/dts/imx6qdl-savageboard.dtsi
Normal file
255
arch/arm/boot/dts/imx6qdl-savageboard.dtsi
Normal file
@ -0,0 +1,255 @@
|
||||
/*
|
||||
* Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
memory@10000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_keys>;
|
||||
|
||||
power {
|
||||
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1";
|
||||
backlight = <&panel_bl>;
|
||||
power-supply = <®_3p3v>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
panel_bl: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <4>;
|
||||
power-supply = <®_3p3v>;
|
||||
pwms = <&pwm1 0 10000>;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&clks {
|
||||
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
|
||||
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
|
||||
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
|
||||
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
|
||||
};
|
||||
|
||||
&fec {
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds-channel@0 {
|
||||
reg = <0>;
|
||||
status = "okay";
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&usdhc3 {
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&usdhc4 {
|
||||
bus-width = <8>;
|
||||
keep-power-in-suspend;
|
||||
no-1-8-v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_emmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_emmc: emmcgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
||||
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
||||
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
||||
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
||||
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
||||
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
||||
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
||||
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
||||
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
||||
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
||||
/* PHY reset */
|
||||
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio_keys: gpiokeysgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm1: pwm1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_sd: sdgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||||
/* CD pin */
|
||||
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user