mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 00:50:50 +07:00
extcon: mrfld: Introduce extcon driver for Basin Cove PMIC
On Intel Merrifield the Basin Cove PMIC provides a feature to detect the USB connection type. This driver utilizes the feature in order to support the USB dual role detection. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This commit is contained in:
Andy Shevchenko
Chanwoo Choi
parent
098b7ae8ec
commit
492929c547
@ -60,6 +60,13 @@ config EXTCON_INTEL_CHT_WC
|
||||
Say Y here to enable extcon support for charger detection / control
|
||||
on the Intel Cherrytrail Whiskey Cove PMIC.
|
||||
|
||||
config EXTCON_INTEL_MRFLD
|
||||
tristate "Intel Merrifield Basin Cove PMIC extcon driver"
|
||||
depends on INTEL_SOC_PMIC_MRFLD
|
||||
help
|
||||
Say Y here to enable extcon support for charger detection / control
|
||||
on the Intel Merrifield Basin Cove PMIC.
|
||||
|
||||
config EXTCON_MAX14577
|
||||
tristate "Maxim MAX14577/77836 EXTCON Support"
|
||||
depends on MFD_MAX14577
|
||||
|
||||
@ -11,6 +11,7 @@ obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o
|
||||
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
|
||||
obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o
|
||||
obj-$(CONFIG_EXTCON_INTEL_CHT_WC) += extcon-intel-cht-wc.o
|
||||
obj-$(CONFIG_EXTCON_INTEL_MRFLD) += extcon-intel-mrfld.o
|
||||
obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
|
||||
obj-$(CONFIG_EXTCON_MAX3355) += extcon-max3355.o
|
||||
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
|
||||
|
||||
284
drivers/extcon/extcon-intel-mrfld.c
Normal file
284
drivers/extcon/extcon-intel-mrfld.c
Normal file
@ -0,0 +1,284 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* extcon driver for Basin Cove PMIC
|
||||
*
|
||||
* Copyright (c) 2019, Intel Corporation.
|
||||
* Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
||||
*/
|
||||
|
||||
#include <linux/extcon-provider.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/mfd/intel_soc_pmic.h>
|
||||
#include <linux/mfd/intel_soc_pmic_mrfld.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#include "extcon-intel.h"
|
||||
|
||||
#define BCOVE_USBIDCTRL 0x19
|
||||
#define BCOVE_USBIDCTRL_ID BIT(0)
|
||||
#define BCOVE_USBIDCTRL_ACA BIT(1)
|
||||
#define BCOVE_USBIDCTRL_ALL (BCOVE_USBIDCTRL_ID | BCOVE_USBIDCTRL_ACA)
|
||||
|
||||
#define BCOVE_USBIDSTS 0x1a
|
||||
#define BCOVE_USBIDSTS_GND BIT(0)
|
||||
#define BCOVE_USBIDSTS_RARBRC_MASK GENMASK(2, 1)
|
||||
#define BCOVE_USBIDSTS_RARBRC_SHIFT 1
|
||||
#define BCOVE_USBIDSTS_NO_ACA 0
|
||||
#define BCOVE_USBIDSTS_R_ID_A 1
|
||||
#define BCOVE_USBIDSTS_R_ID_B 2
|
||||
#define BCOVE_USBIDSTS_R_ID_C 3
|
||||
#define BCOVE_USBIDSTS_FLOAT BIT(3)
|
||||
#define BCOVE_USBIDSTS_SHORT BIT(4)
|
||||
|
||||
#define BCOVE_CHGRIRQ_ALL (BCOVE_CHGRIRQ_VBUSDET | BCOVE_CHGRIRQ_DCDET | \
|
||||
BCOVE_CHGRIRQ_BATTDET | BCOVE_CHGRIRQ_USBIDDET)
|
||||
|
||||
#define BCOVE_CHGRCTRL0 0x4b
|
||||
#define BCOVE_CHGRCTRL0_CHGRRESET BIT(0)
|
||||
#define BCOVE_CHGRCTRL0_EMRGCHREN BIT(1)
|
||||
#define BCOVE_CHGRCTRL0_EXTCHRDIS BIT(2)
|
||||
#define BCOVE_CHGRCTRL0_SWCONTROL BIT(3)
|
||||
#define BCOVE_CHGRCTRL0_TTLCK BIT(4)
|
||||
#define BCOVE_CHGRCTRL0_BIT_5 BIT(5)
|
||||
#define BCOVE_CHGRCTRL0_BIT_6 BIT(6)
|
||||
#define BCOVE_CHGRCTRL0_CHR_WDT_NOKICK BIT(7)
|
||||
|
||||
struct mrfld_extcon_data {
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct extcon_dev *edev;
|
||||
unsigned int status;
|
||||
unsigned int id;
|
||||
};
|
||||
|
||||
static const unsigned int mrfld_extcon_cable[] = {
|
||||
EXTCON_USB,
|
||||
EXTCON_USB_HOST,
|
||||
EXTCON_CHG_USB_SDP,
|
||||
EXTCON_CHG_USB_CDP,
|
||||
EXTCON_CHG_USB_DCP,
|
||||
EXTCON_CHG_USB_ACA,
|
||||
EXTCON_NONE,
|
||||
};
|
||||
|
||||
static int mrfld_extcon_clear(struct mrfld_extcon_data *data, unsigned int reg,
|
||||
unsigned int mask)
|
||||
{
|
||||
return regmap_update_bits(data->regmap, reg, mask, 0x00);
|
||||
}
|
||||
|
||||
static int mrfld_extcon_set(struct mrfld_extcon_data *data, unsigned int reg,
|
||||
unsigned int mask)
|
||||
{
|
||||
return regmap_update_bits(data->regmap, reg, mask, 0xff);
|
||||
}
|
||||
|
||||
static int mrfld_extcon_sw_control(struct mrfld_extcon_data *data, bool enable)
|
||||
{
|
||||
unsigned int mask = BCOVE_CHGRCTRL0_SWCONTROL;
|
||||
struct device *dev = data->dev;
|
||||
int ret;
|
||||
|
||||
if (enable)
|
||||
ret = mrfld_extcon_set(data, BCOVE_CHGRCTRL0, mask);
|
||||
else
|
||||
ret = mrfld_extcon_clear(data, BCOVE_CHGRCTRL0, mask);
|
||||
if (ret)
|
||||
dev_err(dev, "can't set SW control: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mrfld_extcon_get_id(struct mrfld_extcon_data *data)
|
||||
{
|
||||
struct regmap *regmap = data->regmap;
|
||||
unsigned int id;
|
||||
bool ground;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(regmap, BCOVE_USBIDSTS, &id);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (id & BCOVE_USBIDSTS_FLOAT)
|
||||
return INTEL_USB_ID_FLOAT;
|
||||
|
||||
switch ((id & BCOVE_USBIDSTS_RARBRC_MASK) >> BCOVE_USBIDSTS_RARBRC_SHIFT) {
|
||||
case BCOVE_USBIDSTS_R_ID_A:
|
||||
return INTEL_USB_RID_A;
|
||||
case BCOVE_USBIDSTS_R_ID_B:
|
||||
return INTEL_USB_RID_B;
|
||||
case BCOVE_USBIDSTS_R_ID_C:
|
||||
return INTEL_USB_RID_C;
|
||||
}
|
||||
|
||||
/*
|
||||
* PMIC A0 reports USBIDSTS_GND = 1 for ID_GND,
|
||||
* but PMIC B0 reports USBIDSTS_GND = 0 for ID_GND.
|
||||
* Thus we must check this bit at last.
|
||||
*/
|
||||
ground = id & BCOVE_USBIDSTS_GND;
|
||||
switch ('A' + BCOVE_MAJOR(data->id)) {
|
||||
case 'A':
|
||||
return ground ? INTEL_USB_ID_GND : INTEL_USB_ID_FLOAT;
|
||||
case 'B':
|
||||
return ground ? INTEL_USB_ID_FLOAT : INTEL_USB_ID_GND;
|
||||
}
|
||||
|
||||
/* Unknown or unsupported type */
|
||||
return INTEL_USB_ID_FLOAT;
|
||||
}
|
||||
|
||||
static int mrfld_extcon_role_detect(struct mrfld_extcon_data *data)
|
||||
{
|
||||
unsigned int id;
|
||||
bool usb_host;
|
||||
int ret;
|
||||
|
||||
ret = mrfld_extcon_get_id(data);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
id = ret;
|
||||
|
||||
usb_host = (id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A);
|
||||
extcon_set_state_sync(data->edev, EXTCON_USB_HOST, usb_host);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mrfld_extcon_cable_detect(struct mrfld_extcon_data *data)
|
||||
{
|
||||
struct regmap *regmap = data->regmap;
|
||||
unsigned int status, change;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* It seems SCU firmware clears the content of BCOVE_CHGRIRQ1
|
||||
* and makes it useless for OS. Instead we compare a previously
|
||||
* stored status to the current one, provided by BCOVE_SCHGRIRQ1.
|
||||
*/
|
||||
ret = regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
change = status ^ data->status;
|
||||
if (!change)
|
||||
return -ENODATA;
|
||||
|
||||
if (change & BCOVE_CHGRIRQ_USBIDDET) {
|
||||
ret = mrfld_extcon_role_detect(data);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
data->status = status;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t mrfld_extcon_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct mrfld_extcon_data *data = dev_id;
|
||||
int ret;
|
||||
|
||||
ret = mrfld_extcon_cable_detect(data);
|
||||
|
||||
mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
|
||||
|
||||
return ret ? IRQ_NONE: IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int mrfld_extcon_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
|
||||
struct regmap *regmap = pmic->regmap;
|
||||
struct mrfld_extcon_data *data;
|
||||
unsigned int id;
|
||||
int irq, ret;
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq < 0)
|
||||
return irq;
|
||||
|
||||
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
data->dev = dev;
|
||||
data->regmap = regmap;
|
||||
|
||||
data->edev = devm_extcon_dev_allocate(dev, mrfld_extcon_cable);
|
||||
if (IS_ERR(data->edev))
|
||||
return -ENOMEM;
|
||||
|
||||
ret = devm_extcon_dev_register(dev, data->edev);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "can't register extcon device: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_extcon_interrupt,
|
||||
IRQF_ONESHOT | IRQF_SHARED, pdev->name,
|
||||
data);
|
||||
if (ret) {
|
||||
dev_err(dev, "can't register IRQ handler: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regmap_read(regmap, BCOVE_ID, &id);
|
||||
if (ret) {
|
||||
dev_err(dev, "can't read PMIC ID: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
data->id = id;
|
||||
|
||||
ret = mrfld_extcon_sw_control(data, true);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Get initial state */
|
||||
mrfld_extcon_role_detect(data);
|
||||
|
||||
mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
|
||||
mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL);
|
||||
|
||||
mrfld_extcon_set(data, BCOVE_USBIDCTRL, BCOVE_USBIDCTRL_ALL);
|
||||
|
||||
platform_set_drvdata(pdev, data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mrfld_extcon_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct mrfld_extcon_data *data = platform_get_drvdata(pdev);
|
||||
|
||||
mrfld_extcon_sw_control(data, false);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct platform_device_id mrfld_extcon_id_table[] = {
|
||||
{ .name = "mrfld_bcove_pwrsrc" },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(platform, mrfld_extcon_id_table);
|
||||
|
||||
static struct platform_driver mrfld_extcon_driver = {
|
||||
.driver = {
|
||||
.name = "mrfld_bcove_pwrsrc",
|
||||
},
|
||||
.probe = mrfld_extcon_probe,
|
||||
.remove = mrfld_extcon_remove,
|
||||
.id_table = mrfld_extcon_id_table,
|
||||
};
|
||||
module_platform_driver(mrfld_extcon_driver);
|
||||
|
||||
MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
|
||||
MODULE_DESCRIPTION("extcon driver for Intel Merrifield Basin Cove PMIC");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user