From 467c7a7376421176ac248d93c65182847001cfbd Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Tue, 15 May 2018 15:41:41 +0100 Subject: [PATCH] dt-bindings: PCI: designware: Example update Replace "ctrlreg" reg-name by "dbi" to be coherent with similar drivers, however it still be compatible with any previous DT that uses the old reg-name. Replace the PCIe base address example by a real PCIe base address in use. Signed-off-by: Gustavo Pimentel [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring --- .../devicetree/bindings/pci/designware-pcie.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 1da7ade3183c..7f9804d17285 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -1,7 +1,8 @@ * Synopsys DesignWare PCIe interface Required properties: -- compatible: should contain "snps,dw-pcie" to identify the core. +- compatible: + "snps,dw-pcie" for RC mode; - reg: Should contain the configuration address space. - reg-names: Must be "config" for the PCIe configuration space. (The old way of getting the configuration address space from "ranges" @@ -41,11 +42,11 @@ EP mode: Example configuration: - pcie: pcie@dffff000 { + pcie: pcie@dfc00000 { compatible = "snps,dw-pcie"; - reg = <0xdffff000 0x1000>, /* Controller registers */ - <0xd0000000 0x2000>; /* PCI config space */ - reg-names = "ctrlreg", "config"; + reg = <0xdfc00000 0x0001000>, /* IP registers */ + <0xd0000000 0x0002000>; /* Configuration space */ + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -54,5 +55,4 @@ Example configuration: interrupts = <25>, <24>; #interrupt-cells = <1>; num-lanes = <1>; - num-viewport = <3>; };