Merge branch 'for-3.2' into for-3.3

Conflicts:
	sound/soc/codecs/wm8940.c

MAINTAINERS

@@ -6001,7 +6001,7 @@ F:	sound/
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported

include/linux/mfd/wm8994/registers.h

@@ -1962,6 +1962,21 @@
 #define WM8958_MICB2_DISCH_SHIFT                     0  /* MICB2_DISCH */
 #define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
 
+/*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
+#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
+
 /*
  * R76 (0x4C) - Charge Pump (1)
  */

sound/soc/codecs/tlv320aic23.c

@@ -430,6 +430,7 @@ static int tlv320aic23_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		iface_reg |= TLV320AIC23_MS_MASTER;
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
+		iface_reg &= ~TLV320AIC23_MS_MASTER;
 		break;
 	default:
 		return -EINVAL;

sound/soc/codecs/tlv320aic3x.c

@@ -1021,6 +1021,7 @@ static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
 		aic3x->master = 0;
+		iface_areg &= ~(BIT_CLK_MASTER | WORD_CLK_MASTER);
 		break;
 	default:
 		return -EINVAL;

sound/soc/codecs/wm5100.c

@@ -2361,13 +2361,17 @@ static int wm5100_gpio_direction_out(struct gpio_chip *chip,
 {
 	struct wm5100_priv *wm5100 = gpio_to_wm5100(chip);
 	struct snd_soc_codec *codec = wm5100->codec;
-	int val;
+	int val, ret;
 
 	val = (1 << WM5100_GP1_FN_SHIFT) | (!!value << WM5100_GP1_LVL_SHIFT);
 
-	return snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
+	ret = snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
-				   WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
+				  WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
-				   WM5100_GP1_LVL, val);
+				  WM5100_GP1_LVL, val);
+	if (ret < 0)
+		return ret;
+	else
+		return 0;
 }
 
 static int wm5100_gpio_get(struct gpio_chip *chip, unsigned offset)

sound/soc/codecs/wm8711.c

@@ -151,7 +151,7 @@ static int wm8711_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_codec *codec = dai->codec;
 	struct wm8711_priv *wm8711 =  snd_soc_codec_get_drvdata(codec);
-	u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfffc;
+	u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfff3;
 	int i = get_coeff(wm8711->sysclk, params_rate(params));
 	u16 srate = (coeff_div[i].sr << 2) |
 		(coeff_div[i].bosr << 1) | coeff_div[i].usb;
@@ -232,7 +232,7 @@ static int wm8711_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
-	u16 iface = 0;
+	u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0x000c;
 
 	/* set master/slave audio interface */
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {

sound/soc/codecs/wm8904.c

@@ -867,7 +867,7 @@ SOC_ENUM("Right Capture Mode", rin_mode),
 SOC_DOUBLE_R("Capture Volume", WM8904_ANALOGUE_LEFT_INPUT_0,
 	     WM8904_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0),
 SOC_DOUBLE_R("Capture Switch", WM8904_ANALOGUE_LEFT_INPUT_0,
-	     WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 0),
+	     WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 1),
 
 SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
 SOC_ENUM("High Pass Filter Mode", hpf_mode),

sound/soc/codecs/wm8940.c

@@ -488,6 +488,8 @@ static int wm8940_set_bias_level(struct snd_soc_codec *codec,
 		break;
 	}
 
+	codec->dapm.bias_level = level;
+
 	return ret;
 }
 
@@ -619,7 +621,7 @@ static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
 
 	switch (div_id) {
 	case WM8940_BCLKDIV:
-		reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFEF3;
+		reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFE3;
 		ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 2));
 		break;
 	case WM8940_MCLKDIV:

sound/soc/codecs/wm8962.c

@@ -1961,7 +1961,13 @@ static int wm8962_readable_register(struct snd_soc_codec *codec, unsigned int re
 
 static int wm8962_reset(struct snd_soc_codec *codec)
 {
-	return snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243);
+	int ret;
+
+	ret = snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243);
+	if (ret != 0)
+		return ret;
+
+	return snd_soc_write(codec, WM8962_PLL_SOFTWARE_RESET, 0);
 }
 
 static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0);
@@ -2360,15 +2366,14 @@ static int sysclk_event(struct snd_soc_dapm_widget *w,
 
 			snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
 					    WM8962_FLL_ENA, WM8962_FLL_ENA);
-			if (wm8962->irq) {
-				timeout = msecs_to_jiffies(5);
-				timeout = wait_for_completion_timeout(&wm8962->fll_lock,
-								      timeout);
 
-				if (timeout == 0)
+			timeout = msecs_to_jiffies(5);
-					dev_err(codec->dev,
+			timeout = wait_for_completion_timeout(&wm8962->fll_lock,
-						"Timed out starting FLL\n");
+							      timeout);
-			}
+
+			if (wm8962->irq && timeout == 0)
+				dev_err(codec->dev,
+					"Timed out starting FLL\n");
 		}
 		break;
 
@@ -4049,6 +4054,11 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 	snd_soc_update_bits(codec, WM8962_CLOCKING2,
 			    WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
 
+	/* Ensure that the oscillator and PLLs are disabled */
+	snd_soc_update_bits(codec, WM8962_PLL2,
+			    WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
+			    0);
+
 	regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
 
 	if (pdata) {

sound/soc/codecs/wm8994.c

@@ -56,7 +56,7 @@ static int wm8994_retune_mobile_base[] = {
 static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
 {
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
-	struct wm8994 *control = wm8994->control_data;
+	struct wm8994 *control = codec->control_data;
 
 	switch (reg) {
 	case WM8994_GPIO_1:
@@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
 {
 	struct wm8994_priv *wm8994 = data;
 	struct snd_soc_codec *codec = wm8994->codec;
-	int reg;
+	int reg, count;
 
-	reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+	/* We may occasionally read a detection without an impedence
-	if (reg < 0) {
+	 * range being provided - if that happens loop again.
-		dev_err(codec->dev, "Failed to read mic detect status: %d\n",
+	 */
-			reg);
+	count = 10;
-		return IRQ_NONE;
+	do {
-	}
+		reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+		if (reg < 0) {
+			dev_err(codec->dev,
+				"Failed to read mic detect status: %d\n",
+				reg);
+			return IRQ_NONE;
+		}
 
-	if (!(reg & WM8958_MICD_VALID)) {
+		if (!(reg & WM8958_MICD_VALID)) {
-		dev_dbg(codec->dev, "Mic detect data not valid\n");
+			dev_dbg(codec->dev, "Mic detect data not valid\n");
-		goto out;
+			goto out;
-	}
+		}
+
+		if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+			break;
+
+		msleep(1);
+	} while (count--);
+
+	if (count == 0)
+		dev_warn(codec->dev, "No impedence range reported for jack\n");
 
 #ifndef CONFIG_SND_SOC_WM8994_MODULE
 	trace_snd_soc_jack_irq(dev_name(codec->dev));
@@ -3180,9 +3195,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 
 	wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
 			   wm8994_fifo_error, "FIFO error", codec);
-	wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+	wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
 			   wm8994_temp_warn, "Thermal warning", codec);
-	wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+	wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
 			   wm8994_temp_shut, "Thermal shutdown", codec);
 
 	ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,