AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-25 15:50:53 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

omap2+: Add struct omap_board_data and use it for platform level serial init

Browse Source 
This is needed to pass board specific data such as pads used to the
platform level driver init code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2010-12-22 18:42:35 -08:00
parent 8d9af88f55
commit 40e4439930
3 changed files with 38 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
arch/arm/mach-omap2/mux.h
View File

@ -86,6 +86,20 @@
#define OMAP_MUX_REG_8BIT (1 << 0)
#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1)
/**
* struct omap_board_data - board specific device data
* @id: instance id
* @flags: additional flags for platform init code
* @pads: array of device specific pads
* @pads_cnt: ARRAY_SIZE() of pads
*/
struct omap_board_data {
int id;
u32 flags;
struct omap_device_pad *pads;
int pads_cnt;
};
/**
* struct mux_partition - contain partition related information
* @name: name of the current partition

28
arch/arm/mach-omap2/serial.c
View File

@ -45,6 +45,7 @@
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
@ -694,16 +695,16 @@ void __init omap_serial_early_init(void)
/**
* omap_serial_init_port() - initialize single serial port
* @port: serial port number (0-3)
* @bdata: port specific board data pointer
*
* This function initialies serial driver for given @port only.
* This function initialies serial driver for given port only.
* Platforms can call this function instead of omap_serial_init()
* if they don't plan to use all available UARTs as serial ports.
*
* Don't mix calls to omap_serial_init_port() and omap_serial_init(),
* use only one of the two.
*/
void __init omap_serial_init_port(int port)
void __init omap_serial_init_port(struct omap_board_data *bdata)
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
@ -721,13 +722,15 @@ void __init omap_serial_init_port(int port)
struct omap_uart_port_info omap_up;
#endif
if (WARN_ON(port < 0))
if (WARN_ON(!bdata))
return;
if (WARN_ON(port >= num_uarts))
if (WARN_ON(bdata->id < 0))
return;
if (WARN_ON(bdata->id >= num_uarts))
return;
list_for_each_entry(uart, &uart_list, node)
if (port == uart->num)
if (bdata->id == uart->num)
break;
oh = uart->oh;
@ -799,6 +802,8 @@ void __init omap_serial_init_port(int port)
WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
name, oh->name);
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
@ -856,7 +861,14 @@ void __init omap_serial_init_port(int port)
void __init omap_serial_init(void)
{
struct omap_uart_state *uart;
struct omap_board_data bdata;
list_for_each_entry(uart, &uart_list, node)
omap_serial_init_port(uart->num);
list_for_each_entry(uart, &uart_list, node) {
bdata.id = uart->num;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
omap_serial_init_port(&bdata);
}
}

5
arch/arm/plat-omap/include/plat/serial.h
View File

@ -93,9 +93,12 @@
})
#ifndef __ASSEMBLER__
struct omap_board_data;
extern void __init omap_serial_early_init(void);
extern void omap_serial_init(void);
extern void omap_serial_init_port(int port);
extern void omap_serial_init_port(struct omap_board_data *bdata);
extern int omap_uart_can_sleep(void);
extern void omap_uart_check_wakeup(void);
extern void omap_uart_prepare_suspend(void);