AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-24 00:10:51 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Browse Source 
Two minor conflicts:

1) net/ipv4/route.c, adding a new local variable while
   moving another local variable and removing it's
   initial assignment.

2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
   One pretty prints the port mode differently, whilst another
   changes the driver to try and obtain the port mode from
   the port node rather than the switch node.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2020-09-22 16:45:34 -07:00
commit 3ab0a7a0c3
648 changed files with 6112 additions and 3475 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
.clang-format
View File

@ -111,6 +111,7 @@ ForEachMacros:
- 'css_for_each_descendant_pre'
- 'device_for_each_child_node'
- 'dma_fence_chain_for_each'
- 'do_for_each_ftrace_op'
- 'drm_atomic_crtc_for_each_plane'
- 'drm_atomic_crtc_state_for_each_plane'
- 'drm_atomic_crtc_state_for_each_plane_state'
@ -136,6 +137,7 @@ ForEachMacros:
- 'for_each_active_dev_scope'
- 'for_each_active_drhd_unit'
- 'for_each_active_iommu'
- 'for_each_aggr_pgid'
- 'for_each_available_child_of_node'
- 'for_each_bio'
- 'for_each_board_func_rsrc'
@ -234,6 +236,7 @@ ForEachMacros:
- 'for_each_node_state'
- 'for_each_node_with_cpus'
- 'for_each_node_with_property'
- 'for_each_nonreserved_multicast_dest_pgid'
- 'for_each_of_allnodes'
- 'for_each_of_allnodes_from'
- 'for_each_of_cpu_node'
@ -256,6 +259,7 @@ ForEachMacros:
- 'for_each_pci_dev'
- 'for_each_pci_msi_entry'
- 'for_each_pcm_streams'
- 'for_each_physmem_range'
- 'for_each_populated_zone'
- 'for_each_possible_cpu'
- 'for_each_present_cpu'
@ -265,6 +269,8 @@ ForEachMacros:
- 'for_each_process_thread'
- 'for_each_property_of_node'
- 'for_each_registered_fb'
- 'for_each_requested_gpio'
- 'for_each_requested_gpio_in_range'
- 'for_each_reserved_mem_region'
- 'for_each_rtd_codec_dais'
- 'for_each_rtd_codec_dais_rollback'
@ -278,12 +284,17 @@ ForEachMacros:
- 'for_each_sg'
- 'for_each_sg_dma_page'
- 'for_each_sg_page'
- 'for_each_sgtable_dma_page'
- 'for_each_sgtable_dma_sg'
- 'for_each_sgtable_page'
- 'for_each_sgtable_sg'
- 'for_each_sibling_event'
- 'for_each_subelement'
- 'for_each_subelement_extid'
- 'for_each_subelement_id'
- '__for_each_thread'
- 'for_each_thread'
- 'for_each_unicast_dest_pgid'
- 'for_each_wakeup_source'
- 'for_each_zone'
- 'for_each_zone_zonelist'
@ -464,6 +475,7 @@ ForEachMacros:
- 'v4l2_m2m_for_each_src_buf'
- 'v4l2_m2m_for_each_src_buf_safe'
- 'virtio_device_for_each_vq'
- 'while_for_each_ftrace_op'
- 'xa_for_each'
- 'xa_for_each_marked'
- 'xa_for_each_range'

5
.mailmap
View File

@ -169,6 +169,10 @@ Juha Yrjola <juha.yrjola@solidboot.com>
Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
Kamil Konieczny <k.konieczny@samsung.com> <k.konieczny@partner.samsung.com>
Kay Sievers <kay.sievers@vrfy.org>
Kees Cook <keescook@chromium.org> <kees.cook@canonical.com>
Kees Cook <keescook@chromium.org> <keescook@google.com>
Kees Cook <keescook@chromium.org> <kees@outflux.net>
Kees Cook <keescook@chromium.org> <kees@ubuntu.com>
Kenneth W Chen <kenneth.w.chen@intel.com>
Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
@ -308,6 +312,7 @@ Tony Luck <tony.luck@intel.com>
TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>

1
Documentation/admin-guide/dynamic-debug-howto.rst
View File

@ -156,7 +156,6 @@ against. Possible keywords are:::
``line-range`` cannot contain space, e.g.
"1-30" is valid range but "1 - 30" is not.
``module=foo`` combined keyword=value form is interchangably accepted
The meanings of each keyword are:

5
Documentation/bpf/ringbuf.rst
View File

@ -182,9 +182,6 @@ in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus_tests/bpf-rb/_.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
@ -200,7 +197,7 @@ a self-pacing notifications of new data being availability.
being available after commit only if consumer has already caught up right up to
the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c_) show that
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbufs.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of

16
Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
View File

@ -23,8 +23,8 @@ Required properties:
- compatible:
Must be one of :
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
"brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on BRCMSTB SoCs
"brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
@ -36,8 +36,8 @@ Required properties:
BRCMSTB SoCs
"brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi" : MSPI+BSPI on Cygnus, NSP
"brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi" : NS2 SoCs
"brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on Cygnus, NSP
"brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi" : NS2 SoCs
- reg:
Define the bases and ranges of the associated I/O address spaces.
@ -86,7 +86,7 @@ BRCMSTB SoC Example:
spi@f03e3400 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi";
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
reg-names = "cs_reg", "mspi", "bspi";
interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
@ -149,7 +149,7 @@ BRCMSTB SoC Example:
#address-cells = <1>;
#size-cells = <0>;
clocks = <&upg_fixed>;
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi";
compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
reg = <0xf0416000 0x180>;
reg-names = "mspi";
interrupts = <0x14>;
@ -160,7 +160,7 @@ BRCMSTB SoC Example:
iProc SoC Example:
qspi: spi@18027200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18027200 0x184>,
<0x18027000 0x124>,
<0x1811c408 0x004>,
@ -191,7 +191,7 @@ iProc SoC Example:
NS2 SoC Example:
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,

2
Documentation/driver-api/dma-buf.rst
View File

@ -179,7 +179,7 @@ DMA Fence uABI/Sync File
:internal:
Indefinite DMA Fences
~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
At various times &dma_fence with an indefinite time until dma_fence_wait()
finishes have been proposed. Examples include:

2
Documentation/features/debug/debug-vm-pgtable/arch-support.txt
View File

@ -22,7 +22,7 @@
| nios2: | TODO |
| openrisc: | TODO |
| parisc: | TODO |
| powerpc: | ok |
| powerpc: | TODO |
| riscv: | ok |
| s390: | ok |
| sh: | TODO |

3
Documentation/networking/ethtool-netlink.rst
View File

@ -207,6 +207,7 @@ Userspace to kernel:
``ETHTOOL_MSG_TSINFO_GET`` get timestamping info
``ETHTOOL_MSG_CABLE_TEST_ACT`` action start cable test
``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` action start raw TDR cable test
``ETHTOOL_MSG_TUNNEL_INFO_GET`` get tunnel offload info
===================================== ================================
Kernel to userspace:
@ -240,6 +241,7 @@ Kernel to userspace:
``ETHTOOL_MSG_TSINFO_GET_REPLY`` timestamping info
``ETHTOOL_MSG_CABLE_TEST_NTF`` Cable test results
``ETHTOOL_MSG_CABLE_TEST_TDR_NTF`` Cable test TDR results
``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info
===================================== =================================
``GET`` requests are sent by userspace applications to retrieve device
@ -1374,4 +1376,5 @@ are netlink only.
``ETHTOOL_SFECPARAM`` n/a
n/a ''ETHTOOL_MSG_CABLE_TEST_ACT''
n/a ''ETHTOOL_MSG_CABLE_TEST_TDR_ACT''
n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET``
=================================== =====================================

42
Documentation/virt/kvm/api.rst
View File

@ -6130,7 +6130,7 @@ HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx.
8.21 KVM_CAP_HYPERV_DIRECT_TLBFLUSH
-----------------------------------
:Architecture: x86
:Architectures: x86
This capability indicates that KVM running on top of Hyper-V hypervisor
enables Direct TLB flush for its guests meaning that TLB flush
@ -6143,19 +6143,53 @@ in CPUID and only exposes Hyper-V identification. In this case, guest
thinks it's running on Hyper-V and only use Hyper-V hypercalls.
8.22 KVM_CAP_S390_VCPU_RESETS
-----------------------------
Architectures: s390
:Architectures: s390
This capability indicates that the KVM_S390_NORMAL_RESET and
KVM_S390_CLEAR_RESET ioctls are available.
8.23 KVM_CAP_S390_PROTECTED
---------------------------
Architecture: s390
:Architectures: s390
This capability indicates that the Ultravisor has been initialized and
KVM can therefore start protected VMs.
This capability governs the KVM_S390_PV_COMMAND ioctl and the
KVM_MP_STATE_LOAD MP_STATE. KVM_SET_MP_STATE can fail for protected
guests when the state change is invalid.
8.24 KVM_CAP_STEAL_TIME
-----------------------
:Architectures: arm64, x86
This capability indicates that KVM supports steal time accounting.
When steal time accounting is supported it may be enabled with
architecture-specific interfaces. This capability and the architecture-
specific interfaces must be consistent, i.e. if one says the feature
is supported, than the other should as well and vice versa. For arm64
see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL".
For x86 see Documentation/virt/kvm/msr.rst "MSR_KVM_STEAL_TIME".
8.25 KVM_CAP_S390_DIAG318
-------------------------
:Architectures: s390
This capability enables a guest to set information about its control program
(i.e. guest kernel type and version). The information is helpful during
system/firmware service events, providing additional data about the guest
environments running on the machine.
The information is associated with the DIAGNOSE 0x318 instruction, which sets
an 8-byte value consisting of a one-byte Control Program Name Code (CPNC) and
a 7-byte Control Program Version Code (CPVC). The CPNC determines what
environment the control program is running in (e.g. Linux, z/VM...), and the
CPVC is used for information specific to OS (e.g. Linux version, Linux
distribution...)
If this capability is available, then the CPNC and CPVC can be synchronized
between KVM and userspace via the sync regs mechanism (KVM_SYNC_DIAG318).

64
MAINTAINERS
View File

@ -1694,7 +1694,6 @@ F: arch/arm/mach-cns3xxx/
ARM/CAVIUM THUNDER NETWORK DRIVER
M: Sunil Goutham <sgoutham@marvell.com>
M: Robert Richter <rrichter@marvell.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/net/ethernet/cavium/thunder/
@ -3948,8 +3947,8 @@ W: https://wireless.wiki.kernel.org/en/users/Drivers/carl9170
F: drivers/net/wireless/ath/carl9170/
CAVIUM I2C DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Supported
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
W: http://www.marvell.com
F: drivers/i2c/busses/i2c-octeon*
F: drivers/i2c/busses/i2c-thunderx*
@ -3964,8 +3963,8 @@ W: http://www.marvell.com
F: drivers/net/ethernet/cavium/liquidio/
CAVIUM MMC DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Supported
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
W: http://www.marvell.com
F: drivers/mmc/host/cavium*
@ -3977,9 +3976,9 @@ W: http://www.marvell.com
F: drivers/crypto/cavium/cpt/
CAVIUM THUNDERX2 ARM64 SOC
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
S: Odd Fixes
F: Documentation/devicetree/bindings/arm/cavium-thunder2.txt
F: arch/arm64/boot/dts/cavium/thunder2-99xx*
@ -4258,6 +4257,8 @@ S: Maintained
F: .clang-format
CLANG/LLVM BUILD SUPPORT
M: Nathan Chancellor <natechancellor@gmail.com>
M: Nick Desaulniers <ndesaulniers@google.com>
L: clang-built-linux@googlegroups.com
S: Supported
W: https://clangbuiltlinux.github.io/
@ -4407,12 +4408,6 @@ T: git git://git.infradead.org/users/hch/configfs.git
F: fs/configfs/
F: include/linux/configfs.h
CONNECTOR
M: Evgeniy Polyakov <zbr@ioremap.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/connector/
CONSOLE SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S: Supported
@ -6188,7 +6183,7 @@ F: Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
F: drivers/edac/aspeed_edac.c
EDAC-BLUEFIELD
M: Shravan Kumar Ramani <sramani@nvidia.com>
M: Shravan Kumar Ramani <shravankr@nvidia.com>
S: Supported
F: drivers/edac/bluefield_edac.c
@ -6200,16 +6195,15 @@ F: drivers/edac/highbank*
EDAC-CAVIUM OCTEON
M: Ralf Baechle <ralf@linux-mips.org>
M: Robert Richter <rrichter@marvell.com>
L: linux-edac@vger.kernel.org
L: linux-mips@vger.kernel.org
S: Supported
F: drivers/edac/octeon_edac*
EDAC-CAVIUM THUNDERX
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-edac@vger.kernel.org
S: Supported
S: Odd Fixes
F: drivers/edac/thunderx_edac*
EDAC-CORE
@ -6217,7 +6211,7 @@ M: Borislav Petkov <bp@alien8.de>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
M: Tony Luck <tony.luck@intel.com>
R: James Morse <james.morse@arm.com>
R: Robert Richter <rrichter@marvell.com>
R: Robert Richter <rric@kernel.org>
L: linux-edac@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git edac-for-next
@ -6913,6 +6907,14 @@ L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: drivers/dma/fsldma.*
FREESCALE DSPI DRIVER
M: Vladimir Oltean <olteanv@gmail.com>
L: linux-spi@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
F: drivers/spi/spi-fsl-dspi.c
F: include/linux/spi/spi-fsl-dspi.h
FREESCALE ENETC ETHERNET DRIVERS
M: Claudiu Manoil <claudiu.manoil@nxp.com>
L: netdev@vger.kernel.org
@ -8284,7 +8286,7 @@ IA64 (Itanium) PLATFORM
M: Tony Luck <tony.luck@intel.com>
M: Fenghua Yu <fenghua.yu@intel.com>
L: linux-ia64@vger.kernel.org
S: Maintained
S: Odd Fixes
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
F: Documentation/ia64/
F: arch/ia64/
@ -8333,8 +8335,9 @@ S: Supported
F: drivers/pci/hotplug/rpaphp*
IBM Power SRIOV Virtual NIC Device Driver
M: Thomas Falcon <tlfalcon@linux.ibm.com>
M: John Allen <jallen@linux.ibm.com>
M: Dany Madden <drt@linux.ibm.com>
M: Lijun Pan <ljp@linux.ibm.com>
M: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/ibm/ibmvnic.*
@ -8348,7 +8351,7 @@ F: arch/powerpc/platforms/powernv/copy-paste.h
F: arch/powerpc/platforms/powernv/vas*
IBM Power Virtual Ethernet Device Driver
M: Thomas Falcon <tlfalcon@linux.ibm.com>
M: Cristobal Forno <cforno12@linux.ibm.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/ibm/ibmveth.*
@ -9255,7 +9258,7 @@ F: drivers/firmware/iscsi_ibft*
ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
M: Sagi Grimberg <sagi@grimberg.me>
M: Max Gurtovoy <maxg@nvidia.com>
M: Max Gurtovoy <mgurtovoy@nvidia.com>
L: linux-rdma@vger.kernel.org
S: Supported
W: http://www.openfabrics.org
@ -9804,7 +9807,7 @@ F: drivers/scsi/53c700*
LEAKING_ADDRESSES
M: Tobin C. Harding <me@tobin.cc>
M: Tycho Andersen <tycho@tycho.ws>
M: Tycho Andersen <tycho@tycho.pizza>
L: kernel-hardening@lists.openwall.com
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks.git
@ -11062,6 +11065,7 @@ F: drivers/char/hw_random/mtk-rng.c
MEDIATEK SWITCH DRIVER
M: Sean Wang <sean.wang@mediatek.com>
M: Landen Chao <Landen.Chao@mediatek.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/dsa/mt7530.*
@ -12075,6 +12079,7 @@ Q: http://patchwork.ozlabs.org/project/netdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
F: Documentation/devicetree/bindings/net/
F: drivers/connector/
F: drivers/net/
F: include/linux/etherdevice.h
F: include/linux/fcdevice.h
@ -13474,10 +13479,10 @@ F: Documentation/devicetree/bindings/pci/axis,artpec*
F: drivers/pci/controller/dwc/*artpec*
PCIE DRIVER FOR CAVIUM THUNDERX
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Odd Fixes
F: drivers/pci/controller/pci-thunder-*
PCIE DRIVER FOR HISILICON
@ -14416,7 +14421,7 @@ M: Rob Clark <robdclark@gmail.com>
L: iommu@lists.linux-foundation.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/iommu/qcom_iommu.c
F: drivers/iommu/arm/arm-smmu/qcom_iommu.c
QUALCOMM IPCC MAILBOX DRIVER
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@ -15598,6 +15603,7 @@ F: include/uapi/linux/sed*
SECURITY CONTACT
M: Security Officers <security@kernel.org>
S: Supported
F: Documentation/admin-guide/security-bugs.rst
SECURITY SUBSYSTEM
M: James Morris <jmorris@namei.org>
@ -17267,8 +17273,8 @@ S: Maintained
F: drivers/net/thunderbolt.c
THUNDERX GPIO DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Maintained
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
F: drivers/gpio/gpio-thunderx.c
TI AM437X VPFE DRIVER

6
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc6
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
@ -882,10 +882,6 @@ KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
LDFLAGS_vmlinux += --gc-sections
endif
ifdef CONFIG_LIVEPATCH
KBUILD_CFLAGS += $(call cc-option, -flive-patching=inline-clone)
endif
ifdef CONFIG_SHADOW_CALL_STACK
CC_FLAGS_SCS := -fsanitize=shadow-call-stack
KBUILD_CFLAGS += $(CC_FLAGS_SCS)

6
arch/arc/boot/dts/hsdk.dts
View File

@ -88,6 +88,8 @@ idu_intc: idu-interrupt-controller {
arcpct: pct {
compatible = "snps,archs-pct";
interrupt-parent = <&cpu_intc>;
interrupts = <20>;
};
/* TIMER0 with interrupt for clockevent */
@ -208,7 +210,7 @@ gmac: ethernet@8000 {
reg = <0x8000 0x2000>;
interrupts = <10>;
interrupt-names = "macirq";
phy-mode = "rgmii";
phy-mode = "rgmii-id";
snps,pbl = <32>;
snps,multicast-filter-bins = <256>;
clocks = <&gmacclk>;
@ -226,7 +228,7 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
reg = <0>;
};
};

4
arch/arc/include/asm/pgalloc.h
View File

@ -18,10 +18,10 @@
* vineetg: April 2010
* -Switched pgtable_t from being struct page * to unsigned long
* =Needed so that Page Table allocator (pte_alloc_one) is not forced to
* to deal with struct page. Thay way in future we can make it allocate
* deal with struct page. That way in future we can make it allocate
* multiple PG Tbls in one Page Frame
* =sweet side effect is avoiding calls to ugly page_address( ) from the
* pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate
* pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate)
*
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
*/

14
arch/arc/kernel/perf_event.c
View File

@ -562,7 +562,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
{
struct arc_reg_pct_build pct_bcr;
struct arc_reg_cc_build cc_bcr;
int i, has_interrupts;
int i, has_interrupts, irq;
int counter_size; /* in bits */
union cc_name {
@ -637,13 +637,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
.attr_groups = arc_pmu->attr_groups,
};
if (has_interrupts) {
int irq = platform_get_irq(pdev, 0);
if (irq < 0) {
pr_err("Cannot get IRQ number for the platform\n");
return -ENODEV;
}
if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
arc_pmu->irq = irq;
@ -652,9 +646,9 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
this_cpu_ptr(&arc_pmu_cpu));
on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
} else
} else {
arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
}
/*
* perf parser doesn't really like '-' symbol in events name, so let's

77
arch/arc/kernel/troubleshoot.c
View File

@ -18,44 +18,37 @@
#define ARC_PATH_MAX 256
/*
* Common routine to print scratch regs (r0-r12) or callee regs (r13-r25)
* -Prints 3 regs per line and a CR.
* -To continue, callee regs right after scratch, special handling of CR
*/
static noinline void print_reg_file(long *reg_rev, int start_num)
static noinline void print_regs_scratch(struct pt_regs *regs)
{
unsigned int i;
char buf[512];
int n = 0, len = sizeof(buf);
pr_cont("BTA: 0x%08lx\n SP: 0x%08lx FP: 0x%08lx BLK: %pS\n",
regs->bta, regs->sp, regs->fp, (void *)regs->blink);
pr_cont("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);
for (i = start_num; i < start_num + 13; i++) {
n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t",
i, (unsigned long)*reg_rev);
if (((i + 1) % 3) == 0)
n += scnprintf(buf + n, len - n, "\n");
/* because pt_regs has regs reversed: r12..r0, r25..r13 */
if (is_isa_arcv2() && start_num == 0)
reg_rev++;
else
reg_rev--;
}
if (start_num != 0)
n += scnprintf(buf + n, len - n, "\n\n");
/* To continue printing callee regs on same line as scratch regs */
if (start_num == 0)
pr_info("%s", buf);
else
pr_cont("%s\n", buf);
pr_info("r00: 0x%08lx\tr01: 0x%08lx\tr02: 0x%08lx\n" \
"r03: 0x%08lx\tr04: 0x%08lx\tr05: 0x%08lx\n" \
"r06: 0x%08lx\tr07: 0x%08lx\tr08: 0x%08lx\n" \
"r09: 0x%08lx\tr10: 0x%08lx\tr11: 0x%08lx\n" \
"r12: 0x%08lx\t",
regs->r0, regs->r1, regs->r2,
regs->r3, regs->r4, regs->r5,
regs->r6, regs->r7, regs->r8,
regs->r9, regs->r10, regs->r11,
regs->r12);
}
static void show_callee_regs(struct callee_regs *cregs)
static void print_regs_callee(struct callee_regs *regs)
{
print_reg_file(&(cregs->r13), 13);
pr_cont("r13: 0x%08lx\tr14: 0x%08lx\n" \
"r15: 0x%08lx\tr16: 0x%08lx\tr17: 0x%08lx\n" \
"r18: 0x%08lx\tr19: 0x%08lx\tr20: 0x%08lx\n" \
"r21: 0x%08lx\tr22: 0x%08lx\tr23: 0x%08lx\n" \
"r24: 0x%08lx\tr25: 0x%08lx\n",
regs->r13, regs->r14,
regs->r15, regs->r16, regs->r17,
regs->r18, regs->r19, regs->r20,
regs->r21, regs->r22, regs->r23,
regs->r24, regs->r25);
}
static void print_task_path_n_nm(struct task_struct *tsk)
@ -175,7 +168,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
void show_regs(struct pt_regs *regs)
{
struct task_struct *tsk = current;
struct callee_regs *cregs;
struct callee_regs *cregs = (struct callee_regs *)tsk->thread.callee_reg;
/*
* generic code calls us with preemption disabled, but some calls
@ -204,25 +197,15 @@ void show_regs(struct pt_regs *regs)
STS_BIT(regs, A2), STS_BIT(regs, A1),
STS_BIT(regs, E2), STS_BIT(regs, E1));
#else
pr_cont(" [%2s%2s%2s%2s]",
pr_cont(" [%2s%2s%2s%2s] ",
STS_BIT(regs, IE),
(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
STS_BIT(regs, DE), STS_BIT(regs, AE));
#endif
pr_cont(" BTA: 0x%08lx\n SP: 0x%08lx FP: 0x%08lx BLK: %pS\n",
regs->bta, regs->sp, regs->fp, (void *)regs->blink);
pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);
/* print regs->r0 thru regs->r12
* Sequential printing was generating horrible code
*/
print_reg_file(&(regs->r0), 0);
/* If Callee regs were saved, display them too */
cregs = (struct callee_regs *)current->thread.callee_reg;
print_regs_scratch(regs);
if (cregs)
show_callee_regs(cregs);
print_regs_callee(cregs);
preempt_disable();
}

27
arch/arc/mm/init.c
View File

@ -26,8 +26,8 @@ static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
static unsigned long min_high_pfn, max_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
static phys_addr_t high_mem_start;
static phys_addr_t high_mem_sz;
#endif
#ifdef CONFIG_DISCONTIGMEM
@ -69,6 +69,7 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
high_mem_sz = size;
in_use = 1;
memblock_add_node(base, size, 1);
memblock_reserve(base, size);
#endif
}
@ -157,7 +158,7 @@ void __init setup_arch_memory(void)
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
@ -166,6 +167,17 @@ void __init setup_arch_memory(void)
free_area_init(max_zone_pfn);
}
static void __init highmem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
memblock_free(high_mem_start, high_mem_sz);
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
}
/*
* mem_init - initializes memory
*
@ -174,14 +186,7 @@ void __init setup_arch_memory(void)
*/
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
reset_all_zones_managed_pages();
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
memblock_free_all();
highmem_init();
mem_init_print_info(NULL);
}

1
arch/arc/plat-eznps/include/plat/ctop.h
View File

@ -33,7 +33,6 @@
#define CTOP_AUX_DPC (CTOP_AUX_BASE + 0x02C)
#define CTOP_AUX_LPC (CTOP_AUX_BASE + 0x030)
#define CTOP_AUX_EFLAGS (CTOP_AUX_BASE + 0x080)
#define CTOP_AUX_IACK (CTOP_AUX_BASE + 0x088)
#define CTOP_AUX_GPA1 (CTOP_AUX_BASE + 0x08C)
#define CTOP_AUX_UDMC (CTOP_AUX_BASE + 0x300)

2
arch/arm/boot/dts/at91-sama5d2_icp.dts
View File

@ -116,7 +116,6 @@ spi2: spi@400 {
switch0: ksz8563@0 {
compatible = "microchip,ksz8563";
reg = <0>;
phy-mode = "mii";
reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
spi-max-frequency = <500000>;
@ -140,6 +139,7 @@ port@2 {
reg = <2>;
label = "cpu";
ethernet = <&macb0>;
phy-mode = "mii";
fixed-link {
speed = <100>;
full-duplex;

2
arch/arm/boot/dts/bcm-hr2.dtsi
View File

@ -217,7 +217,7 @@ rng: rng@33000 {
};
qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,

2
arch/arm/boot/dts/bcm-nsp.dtsi
View File

@ -284,7 +284,7 @@ nand: nand@26000 {
};
qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,

2
arch/arm/boot/dts/bcm5301x.dtsi
View File

@ -488,7 +488,7 @@ nand: nand@18028000 {
};
spi@18029200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18029200 0x184>,
<0x18029000 0x124>,
<0x1811b408 0x004>,

2
arch/arm/boot/dts/imx6q-logicpd.dts
View File

@ -13,7 +13,7 @@ / {
backlight: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 20000>;
pwms = <&pwm3 0 20000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_lcd>;

2
arch/arm/boot/dts/imx6q-prtwd2.dts
View File

@ -30,7 +30,7 @@ usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
};
/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
i2c@4 {
i2c {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;

2
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View File

@ -22,8 +22,6 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user-pb {
label = "user_pb";

2
arch/arm/boot/dts/imx6sx-pinfunc.h
View File

@ -1026,7 +1026,7 @@
#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0
#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x01B4 0x04FC 0x0840 0x1 0x4
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x0 0x0
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x1 0x0
#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1
#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2
#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1

2
arch/arm/boot/dts/imx7d-zii-rmu2.dts
View File

@ -58,7 +58,7 @@ &fec1 {
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&fec1_phy>;
status = "okay";

8
arch/arm/boot/dts/imx7ulp.dtsi
View File

@ -394,7 +394,7 @@ gpio_ptc: gpio@40ae0000 {
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLC>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 0 32>;
gpio-ranges = <&iomuxc1 0 0 20>;
};
gpio_ptd: gpio@40af0000 {
@ -408,7 +408,7 @@ gpio_ptd: gpio@40af0000 {
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLD>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 32 32>;
gpio-ranges = <&iomuxc1 0 32 12>;
};
gpio_pte: gpio@40b00000 {
@ -422,7 +422,7 @@ gpio_pte: gpio@40b00000 {
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 64 32>;
gpio-ranges = <&iomuxc1 0 64 16>;
};
gpio_ptf: gpio@40b10000 {
@ -436,7 +436,7 @@ gpio_ptf: gpio@40b10000 {
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLF>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 96 32>;
gpio-ranges = <&iomuxc1 0 96 20>;
};
};

29
arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
View File

@ -51,6 +51,8 @@ &vaux4 {
&mcbsp2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
};
&charger {
@ -102,35 +104,18 @@ video_reg: video_reg {
regulator-max-microvolt = <3300000>;
};
lcd0: display@0 {
compatible = "panel-dpi";
label = "28";
status = "okay";
/* default-on; */
lcd0: display {
/* This isn't the exact LCD, but the timings meet spec */
compatible = "logicpd,type28";
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_pin>;
enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
backlight = <&bl>;
enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
panel-timing {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <272>;
hfront-porch = <3>;
hback-porch = <2>;
hsync-len = <42>;
vback-porch = <3>;
vfront-porch = <2>;
vsync-len = <11>;
hsync-active = <1>;
vsync-active = <1>;
de-active = <1>;
pixelclk-active = <0>;
};
};
bl: backlight {

2
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
View File

@ -81,6 +81,8 @@ &vaux4 {
};
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
status = "okay";
};

2
arch/arm/boot/dts/ls1021a.dtsi
View File

@ -182,7 +182,7 @@ qspi: spi@1550000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x1550000 0x0 0x10000>,
<0x0 0x40000000 0x0 0x40000000>;
<0x0 0x40000000 0x0 0x20000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";

20
arch/arm/boot/dts/omap5.dtsi
View File

@ -488,11 +488,11 @@ rfbi: encoder@0 {
};
};
target-module@5000 {
target-module@4000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x5000 0x4>,
<0x5010 0x4>,
<0x5014 0x4>;
reg = <0x4000 0x4>,
<0x4010 0x4>,
<0x4014 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@ -504,7 +504,7 @@ SYSC_OMAP2_SOFTRESET |
ti,syss-mask = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5000 0x1000>;
ranges = <0 0x4000 0x1000>;
dsi1: encoder@0 {
compatible = "ti,omap5-dsi";
@ -514,8 +514,9 @@ dsi1: encoder@0 {
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
};
};
@ -545,8 +546,9 @@ dsi2: encoder@0 {
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
};
};

2
arch/arm/boot/dts/socfpga_arria10.dtsi
View File

@ -821,7 +821,7 @@ timer2: timer2@ffd00000 {
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd01000 0x100>;
reg = <0xffd00100 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
resets = <&rst L4SYSTIMER1_RESET>;

2
arch/arm/boot/dts/vfxxx.dtsi
View File

@ -495,7 +495,7 @@ edma1: dma-controller@40098000 {
};
ocotp: ocotp@400a5000 {
compatible = "fsl,vf610-ocotp";
compatible = "fsl,vf610-ocotp", "syscon";
reg = <0x400a5000 0x1000>;
clocks = <&clks VF610_CLK_OCOTP>;
};

16
arch/arm/configs/integrator_defconfig
View File

@ -1,13 +1,11 @@
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
@ -15,19 +13,17 @@ CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_INTEGRATOR_IMPD1=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_PCI=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPUFREQ_DT=y
CONFIG_CMA=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -37,6 +33,7 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_PCI=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
@ -52,9 +49,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_E100=y
CONFIG_SMC91X=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_DRM=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y

2
arch/arm/mach-omap2/omap-iommu.c
View File

@ -74,7 +74,7 @@ static struct powerdomain *_get_pwrdm(struct device *dev)
return pwrdm;
clk = of_clk_get(dev->of_node->parent, 0);
if (!clk) {
if (IS_ERR(clk)) {
dev_err(dev, "no fck found\n");
return NULL;
}

2
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
View File

@ -745,7 +745,7 @@ nand: nand@66460000 {
};
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,

1
arch/arm64/boot/dts/freescale/Makefile
View File

@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb

2
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View File

@ -702,7 +702,7 @@ sdma1: dma-controller@30bd0000 {
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
<&clk IMX8MP_CLK_SDMA1_ROOT>;
<&clk IMX8MP_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";

2
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View File

@ -423,7 +423,7 @@ gpio5: gpio@30240000 {
tmu: tmu@30260000 {
compatible = "fsl,imx8mq-tmu";
reg = <0x30260000 0x10000>;
interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
little-endian;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;

12
arch/arm64/boot/dts/xilinx/zynqmp.dtsi
View File

@ -13,6 +13,7 @@
*/
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
/ {
compatible = "xlnx,zynqmp";
@ -558,6 +559,15 @@ pcie_intc: legacy-interrupt-controller {
};
};
psgtr: phy@fd400000 {
compatible = "xlnx,zynqmp-psgtr-v1.1";
status = "disabled";
reg = <0x0 0xfd400000 0x0 0x40000>,
<0x0 0xfd3d0000 0x0 0x1000>;
reg-names = "serdes", "siou";
#phy-cells = <4>;
};
rtc: rtc@ffa60000 {
compatible = "xlnx,zynqmp-rtc";
status = "disabled";
@ -601,7 +611,7 @@ sdhci1: mmc@ff170000 {
power-domains = <&zynqmp_firmware PD_SD_1>;
};
smmu: smmu@fd800000 {
smmu: iommu@fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
status = "disabled";

12
arch/arm64/configs/defconfig
View File

@ -724,6 +724,17 @@ CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_RENESAS_USB3=m
CONFIG_USB_TEGRA_XUDC=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_FUSB302=m
@ -914,6 +925,7 @@ CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_ARCH_K3_AM6_SOC=y
CONFIG_ARCH_K3_J721E_SOC=y
CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_IIO=y

14
arch/arm64/include/asm/kvm_emulate.h
View File

@ -298,15 +298,15 @@ static __always_inline int kvm_vcpu_dabt_get_rd(const struct kvm_vcpu *vcpu)
return (kvm_vcpu_get_esr(vcpu) & ESR_ELx_SRT_MASK) >> ESR_ELx_SRT_SHIFT;
}
static __always_inline bool kvm_vcpu_dabt_iss1tw(const struct kvm_vcpu *vcpu)
static __always_inline bool kvm_vcpu_abt_iss1tw(const struct kvm_vcpu *vcpu)
{
return !!(kvm_vcpu_get_esr(vcpu) & ESR_ELx_S1PTW);
}
/* Always check for S1PTW *before* using this. */
static __always_inline bool kvm_vcpu_dabt_iswrite(const struct kvm_vcpu *vcpu)
{
return !!(kvm_vcpu_get_esr(vcpu) & ESR_ELx_WNR) ||
kvm_vcpu_dabt_iss1tw(vcpu); /* AF/DBM update */
return kvm_vcpu_get_esr(vcpu) & ESR_ELx_WNR;
}
static inline bool kvm_vcpu_dabt_is_cm(const struct kvm_vcpu *vcpu)
@ -335,6 +335,11 @@ static inline bool kvm_vcpu_trap_is_iabt(const struct kvm_vcpu *vcpu)
return kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_IABT_LOW;
}
static inline bool kvm_vcpu_trap_is_exec_fault(const struct kvm_vcpu *vcpu)
{
return kvm_vcpu_trap_is_iabt(vcpu) && !kvm_vcpu_abt_iss1tw(vcpu);
}
static __always_inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu)
{
return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC;
@ -372,6 +377,9 @@ static __always_inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)
static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
{
if (kvm_vcpu_abt_iss1tw(vcpu))
return true;
if (kvm_vcpu_trap_is_iabt(vcpu))
return false;

2
arch/arm64/include/asm/kvm_host.h
View File

@ -368,7 +368,6 @@ struct kvm_vcpu_arch {
/* Guest PV state */
struct {
u64 steal;
u64 last_steal;
gpa_t base;
} steal;
@ -544,6 +543,7 @@ long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu);
gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu);
void kvm_update_stolen_time(struct kvm_vcpu *vcpu);
bool kvm_arm_pvtime_supported(void);
int kvm_arm_pvtime_set_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
int kvm_arm_pvtime_get_attr(struct kvm_vcpu *vcpu,

8
arch/arm64/kernel/cpu_errata.c
View File

@ -910,8 +910,12 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
.desc = "ARM erratum 1418040",
.capability = ARM64_WORKAROUND_1418040,
ERRATA_MIDR_RANGE_LIST(erratum_1418040_list),
.type = (ARM64_CPUCAP_SCOPE_LOCAL_CPU |
ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU),
/*
* We need to allow affected CPUs to come in late, but
* also need the non-affected CPUs to be able to come
* in at any point in time. Wonderful.
*/
.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
},
#endif
#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT

26
arch/arm64/kernel/paravirt.c
View File

@ -50,16 +50,19 @@ static u64 pv_steal_clock(int cpu)
struct pv_time_stolen_time_region *reg;
reg = per_cpu_ptr(&stolen_time_region, cpu);
if (!reg->kaddr) {
pr_warn_once("stolen time enabled but not configured for cpu %d\n",
cpu);
/*
* paravirt_steal_clock() may be called before the CPU
* online notification callback runs. Until the callback
* has run we just return zero.
*/
if (!reg->kaddr)
return 0;
}
return le64_to_cpu(READ_ONCE(reg->kaddr->stolen_time));
}
static int stolen_time_dying_cpu(unsigned int cpu)
static int stolen_time_cpu_down_prepare(unsigned int cpu)
{
struct pv_time_stolen_time_region *reg;
@ -73,7 +76,7 @@ static int stolen_time_dying_cpu(unsigned int cpu)
return 0;
}
static int init_stolen_time_cpu(unsigned int cpu)
static int stolen_time_cpu_online(unsigned int cpu)
{
struct pv_time_stolen_time_region *reg;
struct arm_smccc_res res;
@ -103,19 +106,20 @@ static int init_stolen_time_cpu(unsigned int cpu)
return 0;
}
static int pv_time_init_stolen_time(void)
static int __init pv_time_init_stolen_time(void)
{
int ret;
ret = cpuhp_setup_state(CPUHP_AP_ARM_KVMPV_STARTING,
"hypervisor/arm/pvtime:starting",
init_stolen_time_cpu, stolen_time_dying_cpu);
ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
"hypervisor/arm/pvtime:online",
stolen_time_cpu_online,
stolen_time_cpu_down_prepare);
if (ret < 0)
return ret;
return 0;
}
static bool has_pv_steal_clock(void)
static bool __init has_pv_steal_clock(void)
{
struct arm_smccc_res res;

3
arch/arm64/kvm/arm.c
View File

@ -206,6 +206,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
*/
r = 1;
break;
case KVM_CAP_STEAL_TIME:
r = kvm_arm_pvtime_supported();
break;
default:
r = kvm_arch_vm_ioctl_check_extension(kvm, ext);
break;

2
arch/arm64/kvm/hyp/include/hyp/switch.h
View File

@ -449,7 +449,7 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
kvm_vcpu_trap_get_fault_type(vcpu) == FSC_FAULT &&
kvm_vcpu_dabt_isvalid(vcpu) &&
!kvm_vcpu_abt_issea(vcpu) &&
!kvm_vcpu_dabt_iss1tw(vcpu);
!kvm_vcpu_abt_iss1tw(vcpu);
if (valid) {
int ret = __vgic_v2_perform_cpuif_access(vcpu);

12
arch/arm64/kvm/mmu.c
View File

@ -1849,7 +1849,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
struct kvm_s2_mmu *mmu = vcpu->arch.hw_mmu;
write_fault = kvm_is_write_fault(vcpu);
exec_fault = kvm_vcpu_trap_is_iabt(vcpu);
exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
VM_BUG_ON(write_fault && exec_fault);
if (fault_status == FSC_PERM && !write_fault && !exec_fault) {
@ -1877,6 +1877,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
!fault_supports_stage2_huge_mapping(memslot, hva, vma_pagesize)) {
force_pte = true;
vma_pagesize = PAGE_SIZE;
vma_shift = PAGE_SHIFT;
}
/*
@ -1970,7 +1971,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
(fault_status == FSC_PERM &&
stage2_is_exec(mmu, fault_ipa, vma_pagesize));
if (vma_pagesize == PUD_SIZE) {
/*
* If PUD_SIZE == PMD_SIZE, there is no real PUD level, and
* all we have is a 2-level page table. Trying to map a PUD in
* this case would be fatally wrong.
*/
if (PUD_SIZE != PMD_SIZE && vma_pagesize == PUD_SIZE) {
pud_t new_pud = kvm_pfn_pud(pfn, mem_type);
new_pud = kvm_pud_mkhuge(new_pud);
@ -2125,7 +2131,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
goto out;
}
if (kvm_vcpu_dabt_iss1tw(vcpu)) {
if (kvm_vcpu_abt_iss1tw(vcpu)) {
kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
ret = 1;
goto out_unlock;

29
arch/arm64/kvm/pvtime.c
View File

@ -13,25 +13,22 @@
void kvm_update_stolen_time(struct kvm_vcpu *vcpu)
{
struct kvm *kvm = vcpu->kvm;
u64 steal;
__le64 steal_le;
u64 offset;
int idx;
u64 base = vcpu->arch.steal.base;
u64 last_steal = vcpu->arch.steal.last_steal;
u64 offset = offsetof(struct pvclock_vcpu_stolen_time, stolen_time);
u64 steal = 0;
int idx;
if (base == GPA_INVALID)
return;
/* Let's do the local bookkeeping */
steal = vcpu->arch.steal.steal;
steal += current->sched_info.run_delay - vcpu->arch.steal.last_steal;
vcpu->arch.steal.last_steal = current->sched_info.run_delay;
vcpu->arch.steal.steal = steal;
steal_le = cpu_to_le64(steal);
idx = srcu_read_lock(&kvm->srcu);
offset = offsetof(struct pvclock_vcpu_stolen_time, stolen_time);
kvm_put_guest(kvm, base + offset, steal_le, u64);
if (!kvm_get_guest(kvm, base + offset, steal)) {
steal = le64_to_cpu(steal);
vcpu->arch.steal.last_steal = READ_ONCE(current->sched_info.run_delay);
steal += vcpu->arch.steal.last_steal - last_steal;
kvm_put_guest(kvm, base + offset, cpu_to_le64(steal));
}
srcu_read_unlock(&kvm->srcu, idx);
}
@ -43,7 +40,8 @@ long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu)
switch (feature) {
case ARM_SMCCC_HV_PV_TIME_FEATURES:
case ARM_SMCCC_HV_PV_TIME_ST:
val = SMCCC_RET_SUCCESS;
if (vcpu->arch.steal.base != GPA_INVALID)
val = SMCCC_RET_SUCCESS;
break;
}
@ -64,7 +62,6 @@ gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu)
* Start counting stolen time from the time the guest requests
* the feature enabled.
*/
vcpu->arch.steal.steal = 0;
vcpu->arch.steal.last_steal = current->sched_info.run_delay;
idx = srcu_read_lock(&kvm->srcu);
@ -74,7 +71,7 @@ gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu)
return base;
}
static bool kvm_arm_pvtime_supported(void)
bool kvm_arm_pvtime_supported(void)
{
return !!sched_info_on();
}

16
arch/arm64/kvm/trace_arm.h
View File

@ -23,7 +23,7 @@ TRACE_EVENT(kvm_entry,
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
TP_printk("PC: 0x%016lx", __entry->vcpu_pc)
);
TRACE_EVENT(kvm_exit,
@ -42,7 +42,7 @@ TRACE_EVENT(kvm_exit,
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%08lx",
TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%016lx",
__print_symbolic(__entry->ret, kvm_arm_exception_type),
__entry->esr_ec,
__print_symbolic(__entry->esr_ec, kvm_arm_exception_class),
@ -69,7 +69,7 @@ TRACE_EVENT(kvm_guest_fault,
__entry->ipa = ipa;
),
TP_printk("ipa %#llx, hsr %#08lx, hxfar %#08lx, pc %#08lx",
TP_printk("ipa %#llx, hsr %#08lx, hxfar %#08lx, pc %#016lx",
__entry->ipa, __entry->hsr,
__entry->hxfar, __entry->vcpu_pc)
);
@ -131,7 +131,7 @@ TRACE_EVENT(kvm_mmio_emulate,
__entry->cpsr = cpsr;
),
TP_printk("Emulate MMIO at: 0x%08lx (instr: %08lx, cpsr: %08lx)",
TP_printk("Emulate MMIO at: 0x%016lx (instr: %08lx, cpsr: %08lx)",
__entry->vcpu_pc, __entry->instr, __entry->cpsr)
);
@ -149,7 +149,7 @@ TRACE_EVENT(kvm_unmap_hva_range,
__entry->end = end;
),
TP_printk("mmu notifier unmap range: %#08lx -- %#08lx",
TP_printk("mmu notifier unmap range: %#016lx -- %#016lx",
__entry->start, __entry->end)
);
@ -165,7 +165,7 @@ TRACE_EVENT(kvm_set_spte_hva,
__entry->hva = hva;
),
TP_printk("mmu notifier set pte hva: %#08lx", __entry->hva)
TP_printk("mmu notifier set pte hva: %#016lx", __entry->hva)
);
TRACE_EVENT(kvm_age_hva,
@ -182,7 +182,7 @@ TRACE_EVENT(kvm_age_hva,
__entry->end = end;
),
TP_printk("mmu notifier age hva: %#08lx -- %#08lx",
TP_printk("mmu notifier age hva: %#016lx -- %#016lx",
__entry->start, __entry->end)
);
@ -198,7 +198,7 @@ TRACE_EVENT(kvm_test_age_hva,
__entry->hva = hva;
),
TP_printk("mmu notifier test age hva: %#08lx", __entry->hva)
TP_printk("mmu notifier test age hva: %#016lx", __entry->hva)
);
TRACE_EVENT(kvm_set_way_flush,

6
arch/arm64/kvm/trace_handle_exit.h
View File

@ -22,7 +22,7 @@ TRACE_EVENT(kvm_wfx_arm64,
__entry->is_wfe = is_wfe;
),
TP_printk("guest executed wf%c at: 0x%08lx",
TP_printk("guest executed wf%c at: 0x%016lx",
__entry->is_wfe ? 'e' : 'i', __entry->vcpu_pc)
);
@ -42,7 +42,7 @@ TRACE_EVENT(kvm_hvc_arm64,
__entry->imm = imm;
),
TP_printk("HVC at 0x%08lx (r0: 0x%08lx, imm: 0x%lx)",
TP_printk("HVC at 0x%016lx (r0: 0x%016lx, imm: 0x%lx)",
__entry->vcpu_pc, __entry->r0, __entry->imm)
);
@ -135,7 +135,7 @@ TRACE_EVENT(trap_reg,
__entry->write_value = write_value;
),
TP_printk("%s %s reg %d (0x%08llx)", __entry->fn, __entry->is_write?"write to":"read from", __entry->reg, __entry->write_value)
TP_printk("%s %s reg %d (0x%016llx)", __entry->fn, __entry->is_write?"write to":"read from", __entry->reg, __entry->write_value)
);
TRACE_EVENT(kvm_handle_sys_reg,

43
arch/arm64/net/bpf_jit_comp.c
View File

@ -143,14 +143,17 @@ static inline void emit_addr_mov_i64(const int reg, const u64 val,
}
}
static inline int bpf2a64_offset(int bpf_to, int bpf_from,
static inline int bpf2a64_offset(int bpf_insn, int off,
const struct jit_ctx *ctx)
{
int to = ctx->offset[bpf_to];
/* -1 to account for the Branch instruction */
int from = ctx->offset[bpf_from] - 1;
return to - from;
/* BPF JMP offset is relative to the next instruction */
bpf_insn++;
/*
* Whereas arm64 branch instructions encode the offset
* from the branch itself, so we must subtract 1 from the
* instruction offset.
*/
return ctx->offset[bpf_insn + off] - (ctx->offset[bpf_insn] - 1);
}
static void jit_fill_hole(void *area, unsigned int size)
@ -642,7 +645,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
/* JUMP off */
case BPF_JMP | BPF_JA:
jmp_offset = bpf2a64_offset(i + off, i, ctx);
jmp_offset = bpf2a64_offset(i, off, ctx);
check_imm26(jmp_offset);
emit(A64_B(jmp_offset), ctx);
break;
@ -669,7 +672,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_JMP32 | BPF_JSLE | BPF_X:
emit(A64_CMP(is64, dst, src), ctx);
emit_cond_jmp:
jmp_offset = bpf2a64_offset(i + off, i, ctx);
jmp_offset = bpf2a64_offset(i, off, ctx);
check_imm19(jmp_offset);
switch (BPF_OP(code)) {
case BPF_JEQ:
@ -908,10 +911,21 @@ static int build_body(struct jit_ctx *ctx, bool extra_pass)
const struct bpf_prog *prog = ctx->prog;
int i;
/*
* - offset[0] offset of the end of prologue,
* start of the 1st instruction.
* - offset[1] - offset of the end of 1st instruction,
* start of the 2nd instruction
* [....]
* - offset[3] - offset of the end of 3rd instruction,
* start of 4th instruction
*/
for (i = 0; i < prog->len; i++) {
const struct bpf_insn *insn = &prog->insnsi[i];
int ret;
if (ctx->image == NULL)
ctx->offset[i] = ctx->idx;
ret = build_insn(insn, ctx, extra_pass);
if (ret > 0) {
i++;
@ -919,11 +933,16 @@ static int build_body(struct jit_ctx *ctx, bool extra_pass)
ctx->offset[i] = ctx->idx;
continue;
}
if (ctx->image == NULL)
ctx->offset[i] = ctx->idx;
if (ret)
return ret;
}
/*
* offset is allocated with prog->len + 1 so fill in
* the last element with the offset after the last
* instruction (end of program)
*/
if (ctx->image == NULL)
ctx->offset[i] = ctx->idx;
return 0;
}
@ -1002,7 +1021,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
memset(&ctx, 0, sizeof(ctx));
ctx.prog = prog;
ctx.offset = kcalloc(prog->len, sizeof(int), GFP_KERNEL);
ctx.offset = kcalloc(prog->len + 1, sizeof(int), GFP_KERNEL);
if (ctx.offset == NULL) {
prog = orig_prog;
goto out_off;
@ -1089,7 +1108,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
prog->jited_len = prog_size;
if (!prog->is_func || extra_pass) {
bpf_prog_fill_jited_linfo(prog, ctx.offset);
bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
out_off:
kfree(ctx.offset);
kfree(jit_data);

2
arch/ia64/include/asm/acpi.h
View File

@ -74,8 +74,6 @@ static inline void arch_acpi_set_pdc_bits(u32 *buf)
buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
}
#define acpi_unlazy_tlb(x)
#ifdef CONFIG_ACPI_NUMA
extern cpumask_t early_cpu_possible_map;
#define for_each_possible_early_cpu(cpu) \

1
arch/mips/Kconfig
View File

@ -877,6 +877,7 @@ config SNI_RM
select I8253
select I8259
select ISA
select MIPS_L1_CACHE_SHIFT_6
select SWAP_IO_SPACE if CPU_BIG_ENDIAN
select SYS_HAS_CPU_R4X00
select SYS_HAS_CPU_R5000

2
arch/mips/kvm/mips.c
View File

@ -137,6 +137,8 @@ extern void kvm_init_loongson_ipi(struct kvm *kvm);
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
switch (type) {
case KVM_VM_MIPS_AUTO:
break;
#ifdef CONFIG_KVM_MIPS_VZ
case KVM_VM_MIPS_VZ:
#else

9
arch/mips/sni/a20r.c
View File

@ -143,7 +143,10 @@ static struct platform_device sc26xx_pdev = {
},
};
static u32 a20r_ack_hwint(void)
/*
* Trigger chipset to update CPU's CAUSE IP field
*/
static u32 a20r_update_cause_ip(void)
{
u32 status = read_c0_status();
@ -205,12 +208,14 @@ static void a20r_hwint(void)
int irq;
clear_c0_status(IE_IRQ0);
status = a20r_ack_hwint();
status = a20r_update_cause_ip();
cause = read_c0_cause();
irq = ffs(((cause & status) >> 8) & 0xf8);
if (likely(irq > 0))
do_IRQ(SNI_A20R_IRQ_BASE + irq - 1);
a20r_update_cause_ip();
set_c0_status(IE_IRQ0);
}

33
arch/openrisc/include/asm/uaccess.h
View File

@ -165,19 +165,19 @@ struct __large_struct {
#define __get_user_nocheck(x, ptr, size) \
({ \
long __gu_err, __gu_val; \
__get_user_size(__gu_val, (ptr), (size), __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
long __gu_err; \
__get_user_size((x), (ptr), (size), __gu_err); \
__gu_err; \
})
#define __get_user_check(x, ptr, size) \
({ \
long __gu_err = -EFAULT, __gu_val = 0; \
long __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
if (access_ok(__gu_addr, size)) \
__get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
if (access_ok(__gu_addr, size)) \
__get_user_size((x), __gu_addr, (size), __gu_err); \
else \
(x) = (__typeof__(*(ptr))) 0; \
__gu_err; \
})
@ -191,11 +191,13 @@ do { \
case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break; \
case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break; \
case 8: __get_user_asm2(x, ptr, retval); break; \
default: (x) = __get_user_bad(); \
default: (x) = (__typeof__(*(ptr)))__get_user_bad(); \
} \
} while (0)
#define __get_user_asm(x, addr, err, op) \
{ \
unsigned long __gu_tmp; \
__asm__ __volatile__( \
"1: "op" %1,0(%2)\n" \
"2:\n" \
@ -209,10 +211,14 @@ do { \
" .align 2\n" \
" .long 1b,3b\n" \
".previous" \
: "=r"(err), "=r"(x) \
: "r"(addr), "i"(-EFAULT), "0"(err))
: "=r"(err), "=r"(__gu_tmp) \
: "r"(addr), "i"(-EFAULT), "0"(err)); \
(x) = (__typeof__(*(addr)))__gu_tmp; \
}
#define __get_user_asm2(x, addr, err) \
{ \
unsigned long long __gu_tmp; \
__asm__ __volatile__( \
"1: l.lwz %1,0(%2)\n" \
"2: l.lwz %H1,4(%2)\n" \
@ -229,8 +235,11 @@ do { \
" .long 1b,4b\n" \
" .long 2b,4b\n" \
".previous" \
: "=r"(err), "=&r"(x) \
: "r"(addr), "i"(-EFAULT), "0"(err))
: "=r"(err), "=&r"(__gu_tmp) \
: "r"(addr), "i"(-EFAULT), "0"(err)); \
(x) = (__typeof__(*(addr)))( \
(__typeof__((x)-(x)))__gu_tmp); \
}
/* more complex routines */

10
arch/openrisc/kernel/setup.c
View File

@ -80,6 +80,16 @@ static void __init setup_memory(void)
*/
memblock_reserve(__pa(_stext), _end - _stext);
#ifdef CONFIG_BLK_DEV_INITRD
/* Then reserve the initrd, if any */
if (initrd_start && (initrd_end > initrd_start)) {
unsigned long aligned_start = ALIGN_DOWN(initrd_start, PAGE_SIZE);
unsigned long aligned_end = ALIGN(initrd_end, PAGE_SIZE);
memblock_reserve(__pa(aligned_start), aligned_end - aligned_start);
}
#endif /* CONFIG_BLK_DEV_INITRD */
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();

2
arch/openrisc/mm/cache.c
View File

@ -16,7 +16,7 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
static void cache_loop(struct page *page, const unsigned int reg)
static __always_inline void cache_loop(struct page *page, const unsigned int reg)
{
unsigned long paddr = page_to_pfn(page) << PAGE_SHIFT;
unsigned long line = paddr & ~(L1_CACHE_BYTES - 1);

1
arch/powerpc/Kconfig
View File

@ -116,7 +116,6 @@ config PPC
#
select ARCH_32BIT_OFF_T if PPC32
select ARCH_HAS_DEBUG_VIRTUAL
select ARCH_HAS_DEBUG_VM_PGTABLE
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ELF_RANDOMIZE
select ARCH_HAS_FORTIFY_SOURCE

1
arch/powerpc/configs/pasemi_defconfig
View File

@ -108,7 +108,6 @@ CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RADEON=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y

1
arch/powerpc/configs/ppc6xx_defconfig
View File

@ -743,7 +743,6 @@ CONFIG_FB_TRIDENT=m
CONFIG_FB_SM501=m
CONFIG_FB_IBM_GXT4500=y
CONFIG_LCD_PLATFORM=m
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y

10
arch/powerpc/include/asm/book3s/64/mmu.h
View File

@ -239,14 +239,14 @@ static inline void early_init_mmu_secondary(void)
extern void hash__setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size);
extern void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size);
static inline void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
{
if (early_radix_enabled())
return radix__setup_initial_memory_limit(first_memblock_base,
first_memblock_size);
/*
* Hash has more strict restrictions. At this point we don't
* know which translations we will pick. Hence go with hash
* restrictions.
*/
return hash__setup_initial_memory_limit(first_memblock_base,
first_memblock_size);
}

3
arch/powerpc/kernel/dma-iommu.c
View File

@ -120,7 +120,8 @@ u64 dma_iommu_get_required_mask(struct device *dev)
if (!tbl)
return 0;
mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
mask = 1ULL << (fls_long(tbl->it_offset + tbl->it_size) +
tbl->it_page_shift - 1);
mask += mask - 1;
return mask;

2
arch/powerpc/kernel/vdso32/Makefile
View File

@ -50,7 +50,7 @@ $(obj-vdso32): %.o: %.S FORCE
# actual build commands
quiet_cmd_vdso32ld = VDSO32L $@
cmd_vdso32ld = $(VDSOCC) $(c_flags) $(CC32FLAGS) -o $@ $(call cc-ldoption, -Wl$(comma)--orphan-handling=warn) -Wl,-T$(filter %.lds,$^) $(filter %.o,$^)
cmd_vdso32ld = $(VDSOCC) $(c_flags) $(CC32FLAGS) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^)
quiet_cmd_vdso32as = VDSO32A $@
cmd_vdso32as = $(VDSOCC) $(a_flags) $(CC32FLAGS) -c -o $@ $<

1
arch/powerpc/kernel/vdso32/vdso32.lds.S
View File

@ -111,7 +111,6 @@ SECTIONS
*(.note.GNU-stack)
*(.data .data.* .gnu.linkonce.d.* .sdata*)
*(.bss .sbss .dynbss .dynsbss)
*(.glink .iplt .plt .rela*)
}
}

2
arch/powerpc/kernel/vdso64/Makefile
View File

@ -34,7 +34,7 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
# actual build commands
quiet_cmd_vdso64ld = VDSO64L $@
cmd_vdso64ld = $(CC) $(c_flags) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^) $(call cc-ldoption, -Wl$(comma)--orphan-handling=warn)
cmd_vdso64ld = $(CC) $(c_flags) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^)
# install commands for the unstripped file
quiet_cmd_vdso_install = INSTALL $@

3
arch/powerpc/kernel/vdso64/vdso64.lds.S
View File

@ -30,7 +30,7 @@ SECTIONS
. = ALIGN(16);
.text : {
*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
*(.sfpr)
*(.sfpr .glink)
} :text
PROVIDE(__etext = .);
PROVIDE(_etext = .);
@ -111,7 +111,6 @@ SECTIONS
*(.branch_lt)
*(.data .data.* .gnu.linkonce.d.* .sdata*)
*(.bss .sbss .dynbss .dynsbss)
*(.glink .iplt .plt .rela*)
}
}

15
arch/powerpc/mm/book3s64/radix_pgtable.c
View File

@ -734,21 +734,6 @@ void radix__mmu_cleanup_all(void)
}
}
void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
{
/*
* We don't currently support the first MEMBLOCK not mapping 0
* physical on those processors
*/
BUG_ON(first_memblock_base != 0);
/*
* Radix mode is not limited by RMA / VRMA addressing.
*/
ppc64_rma_size = ULONG_MAX;
}
#ifdef CONFIG_MEMORY_HOTPLUG
static void free_pte_table(pte_t *pte_start, pmd_t *pmd)
{

11
arch/powerpc/mm/init_64.c
View File

@ -433,9 +433,16 @@ void __init mmu_early_init_devtree(void)
if (!(mfmsr() & MSR_HV))
early_check_vec5();
if (early_radix_enabled())
if (early_radix_enabled()) {
radix__early_init_devtree();
else
/*
* We have finalized the translation we are going to use by now.
* Radix mode is not limited by RMA / VRMA addressing.
* Hence don't limit memblock allocations.
*/
ppc64_rma_size = ULONG_MAX;
memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
} else
hash__early_init_devtree();
}
#endif /* CONFIG_PPC_BOOK3S_64 */

2
arch/powerpc/platforms/pseries/papr_scm.c
View File

@ -822,7 +822,7 @@ static ssize_t perf_stats_show(struct device *dev,
kfree(stats);
return rc ? rc : seq_buf_used(&s);
}
DEVICE_ATTR_RO(perf_stats);
DEVICE_ATTR_ADMIN_RO(perf_stats);
static ssize_t flags_show(struct device *dev,
struct device_attribute *attr, char *buf)

1
arch/riscv/Kconfig
View File

@ -32,6 +32,7 @@ config RISCV
select ARCH_WANT_FRAME_POINTERS
select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
select CLONE_BACKWARDS
select CLINT_TIMER if !MMU
select COMMON_CLK
select EDAC_SUPPORT
select GENERIC_ARCH_TOPOLOGY if SMP

6
arch/riscv/boot/dts/kendryte/k210.dtsi
View File

@ -95,10 +95,12 @@ sysctl: sysctl@50440000 {
#clock-cells = <1>;
};
clint0: interrupt-controller@2000000 {
clint0: clint@2000000 {
#interrupt-cells = <1>;
compatible = "riscv,clint0";
reg = <0x2000000 0xC000>;
interrupts-extended = <&cpu0_intc 3>, <&cpu1_intc 3>;
interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
&cpu1_intc 3 &cpu1_intc 7>;
clocks = <&sysctl K210_CLK_ACLK>;
};

26
arch/riscv/include/asm/clint.h Normal file
View File

@ -0,0 +1,26 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 Google, Inc
*/
#ifndef _ASM_RISCV_CLINT_H
#define _ASM_RISCV_CLINT_H
#include <linux/types.h>
#include <asm/mmio.h>
#ifdef CONFIG_RISCV_M_MODE
/*
* This lives in the CLINT driver, but is accessed directly by timex.h to avoid
* any overhead when accessing the MMIO timer.
*
* The ISA defines mtime as a 64-bit memory-mapped register that increments at
* a constant frequency, but it doesn't define some other constraints we depend
* on (most notably ordering constraints, but also some simpler stuff like the
* memory layout). Thus, this is called "clint_time_val" instead of something
* like "riscv_mtime", to signify that these non-ISA assumptions must hold.
*/
extern u64 __iomem *clint_time_val;
#endif
#endif

7
arch/riscv/include/asm/ftrace.h
View File

@ -66,6 +66,13 @@ do { \
* Let auipc+jalr be the basic *mcount unit*, so we make it 8 bytes here.
*/
#define MCOUNT_INSN_SIZE 8
#ifndef __ASSEMBLY__
struct dyn_ftrace;
int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
#define ftrace_init_nop ftrace_init_nop
#endif
#endif
#endif /* _ASM_RISCV_FTRACE_H */

27
arch/riscv/include/asm/timex.h
View File

@ -10,6 +10,31 @@
typedef unsigned long cycles_t;
#ifdef CONFIG_RISCV_M_MODE
#include <asm/clint.h>
#ifdef CONFIG_64BIT
static inline cycles_t get_cycles(void)
{
return readq_relaxed(clint_time_val);
}
#else /* !CONFIG_64BIT */
static inline u32 get_cycles(void)
{
return readl_relaxed(((u32 *)clint_time_val));
}
#define get_cycles get_cycles
static inline u32 get_cycles_hi(void)
{
return readl_relaxed(((u32 *)clint_time_val) + 1);
}
#define get_cycles_hi get_cycles_hi
#endif /* CONFIG_64BIT */
#else /* CONFIG_RISCV_M_MODE */
static inline cycles_t get_cycles(void)
{
return csr_read(CSR_TIME);
@ -41,6 +66,8 @@ static inline u64 get_cycles64(void)
}
#endif /* CONFIG_64BIT */
#endif /* !CONFIG_RISCV_M_MODE */
#define ARCH_HAS_READ_CURRENT_TIMER
static inline int read_current_timer(unsigned long *timer_val)
{

19
arch/riscv/kernel/ftrace.c
View File

@ -97,6 +97,25 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
return __ftrace_modify_call(rec->ip, addr, false);
}
/*
* This is called early on, and isn't wrapped by
* ftrace_arch_code_modify_{prepare,post_process}() and therefor doesn't hold
* text_mutex, which triggers a lockdep failure. SMP isn't running so we could
* just directly poke the text, but it's simpler to just take the lock
* ourselves.
*/
int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
{
int out;
ftrace_arch_code_modify_prepare();
out = ftrace_make_nop(mod, rec, MCOUNT_ADDR);
ftrace_arch_code_modify_post_process();
return out;
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
int ret = __ftrace_modify_call((unsigned long)&ftrace_call,

7
arch/riscv/mm/init.c
View File

@ -226,12 +226,11 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
ptep = &fixmap_pte[pte_index(addr)];
if (pgprot_val(prot)) {
if (pgprot_val(prot))
set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
} else {
else
pte_clear(&init_mm, addr, ptep);
local_flush_tlb_page(addr);
}
local_flush_tlb_page(addr);
}
static pte_t *__init get_pte_virt(phys_addr_t pa)

1
arch/s390/kernel/entry.h
View File

@ -26,6 +26,7 @@ void do_protection_exception(struct pt_regs *regs);
void do_dat_exception(struct pt_regs *regs);
void do_secure_storage_access(struct pt_regs *regs);
void do_non_secure_storage_access(struct pt_regs *regs);
void do_secure_storage_violation(struct pt_regs *regs);
void addressing_exception(struct pt_regs *regs);
void data_exception(struct pt_regs *regs);

5
arch/s390/kernel/idle.c
View File

@ -39,14 +39,13 @@ void enabled_wait(void)
local_irq_restore(flags);
/* Account time spent with enabled wait psw loaded as idle time. */
/* XXX seqcount has tracepoints that require RCU */
write_seqcount_begin(&idle->seqcount);
raw_write_seqcount_begin(&idle->seqcount);
idle_time = idle->clock_idle_exit - idle->clock_idle_enter;
idle->clock_idle_enter = idle->clock_idle_exit = 0ULL;
idle->idle_time += idle_time;
idle->idle_count++;
account_idle_time(cputime_to_nsecs(idle_time));
write_seqcount_end(&idle->seqcount);
raw_write_seqcount_end(&idle->seqcount);
}
NOKPROBE_SYMBOL(enabled_wait);

2
arch/s390/kernel/pgm_check.S
View File

@ -80,7 +80,7 @@ PGM_CHECK(do_dat_exception) /* 3b */
PGM_CHECK_DEFAULT /* 3c */
PGM_CHECK(do_secure_storage_access) /* 3d */
PGM_CHECK(do_non_secure_storage_access) /* 3e */
PGM_CHECK_DEFAULT /* 3f */
PGM_CHECK(do_secure_storage_violation) /* 3f */
PGM_CHECK(monitor_event_exception) /* 40 */
PGM_CHECK_DEFAULT /* 41 */
PGM_CHECK_DEFAULT /* 42 */

6
arch/s390/kernel/setup.c
View File

@ -619,7 +619,7 @@ static struct notifier_block kdump_mem_nb = {
/*
* Make sure that the area behind memory_end is protected
*/
static void reserve_memory_end(void)
static void __init reserve_memory_end(void)
{
if (memory_end_set)
memblock_reserve(memory_end, ULONG_MAX);
@ -628,7 +628,7 @@ static void reserve_memory_end(void)
/*
* Make sure that oldmem, where the dump is stored, is protected
*/
static void reserve_oldmem(void)
static void __init reserve_oldmem(void)
{
#ifdef CONFIG_CRASH_DUMP
if (OLDMEM_BASE)
@ -640,7 +640,7 @@ static void reserve_oldmem(void)
/*
* Make sure that oldmem, where the dump is stored, is protected
*/
static void remove_oldmem(void)
static void __init remove_oldmem(void)
{
#ifdef CONFIG_CRASH_DUMP
if (OLDMEM_BASE)

20
arch/s390/mm/fault.c
View File

@ -859,6 +859,21 @@ void do_non_secure_storage_access(struct pt_regs *regs)
}
NOKPROBE_SYMBOL(do_non_secure_storage_access);
void do_secure_storage_violation(struct pt_regs *regs)
{
/*
* Either KVM messed up the secure guest mapping or the same
* page is mapped into multiple secure guests.
*
* This exception is only triggered when a guest 2 is running
* and can therefore never occur in kernel context.
*/
printk_ratelimited(KERN_WARNING
"Secure storage violation in task: %s, pid %d\n",
current->comm, current->pid);
send_sig(SIGSEGV, current, 0);
}
#else
void do_secure_storage_access(struct pt_regs *regs)
{
@ -869,4 +884,9 @@ void do_non_secure_storage_access(struct pt_regs *regs)
{
default_trap_handler(regs);
}
void do_secure_storage_violation(struct pt_regs *regs)
{
default_trap_handler(regs);
}
#endif

4
arch/s390/pci/pci.c
View File

@ -668,6 +668,10 @@ EXPORT_SYMBOL_GPL(zpci_enable_device);
int zpci_disable_device(struct zpci_dev *zdev)
{
zpci_dma_exit_device(zdev);
/*
* The zPCI function may already be disabled by the platform, this is
* detected in clp_disable_fh() which becomes a no-op.
*/
return clp_disable_fh(zdev);
}
EXPORT_SYMBOL_GPL(zpci_disable_device);

2
arch/s390/pci/pci_event.c
View File

@ -143,6 +143,8 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
zpci_remove_device(zdev);
}
zdev->fh = ccdf->fh;
zpci_disable_device(zdev);
zdev->state = ZPCI_FN_STATE_STANDBY;
if (!clp_get_state(ccdf->fid, &state) &&
state == ZPCI_FN_STATE_RESERVED) {

1
arch/sh/include/asm/smp.h
View File

@ -8,7 +8,6 @@
#ifdef CONFIG_SMP
#include <linux/spinlock.h>
#include <linux/atomic.h>
#include <asm/current.h>
#include <asm/percpu.h>

1
arch/sh/kernel/entry-common.S
View File

@ -370,7 +370,6 @@ syscall_trace_entry:
nop
cmp/eq #-1, r0
bt syscall_exit
mov.l r0, @(OFF_R0,r15) ! Save return value
! Reload R0-R4 from kernel stack, where the
! parent may have modified them using
! ptrace(POKEUSR). (Note that R0-R2 are

15
arch/sh/kernel/ptrace_32.c
View File

@ -455,16 +455,11 @@ long arch_ptrace(struct task_struct *child, long request,
asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
{
long ret = 0;
if (test_thread_flag(TIF_SYSCALL_TRACE) &&
tracehook_report_syscall_entry(regs))
/*
* Tracing decided this syscall should not happen.
* We'll return a bogus call number to get an ENOSYS
* error, but leave the original number in regs->regs[0].
*/
ret = -1L;
tracehook_report_syscall_entry(regs)) {
regs->regs[0] = -ENOSYS;
return -1;
}
if (secure_computing() == -1)
return -1;
@ -475,7 +470,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
audit_syscall_entry(regs->regs[3], regs->regs[4], regs->regs[5],
regs->regs[6], regs->regs[7]);
return ret ?: regs->regs[0];
return 0;
}
asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)

2
arch/x86/boot/compressed/Makefile
View File

@ -43,6 +43,8 @@ KBUILD_CFLAGS += -Wno-pointer-sign
KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
KBUILD_CFLAGS += -D__DISABLE_EXPORTS
# Disable relocation relaxation in case the link is not PIE.
KBUILD_CFLAGS += $(call as-option,-Wa$(comma)-mrelax-relocations=no)
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
GCOV_PROFILE := n

2
arch/x86/configs/i386_defconfig
View File

@ -19,6 +19,7 @@ CONFIG_CGROUP_CPUACCT=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
# CONFIG_64BIT is not set
CONFIG_SMP=y
CONFIG_X86_GENERIC=y
CONFIG_HPET_TIMER=y
@ -186,7 +187,6 @@ CONFIG_DRM_I915=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_EFI=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set

1
arch/x86/configs/x86_64_defconfig
View File

@ -181,7 +181,6 @@ CONFIG_DRM_I915=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_EFI=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set

29
arch/x86/entry/common.c
View File

@ -60,16 +60,10 @@ __visible noinstr void do_syscall_64(unsigned long nr, struct pt_regs *regs)
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
static __always_inline unsigned int syscall_32_enter(struct pt_regs *regs)
{
unsigned int nr = (unsigned int)regs->orig_ax;
if (IS_ENABLED(CONFIG_IA32_EMULATION))
current_thread_info()->status |= TS_COMPAT;
/*
* Subtlety here: if ptrace pokes something larger than 2^32-1 into
* orig_ax, the unsigned int return value truncates it. This may
* or may not be necessary, but it matches the old asm behavior.
*/
return (unsigned int)syscall_enter_from_user_mode(regs, nr);
return (unsigned int)regs->orig_ax;
}
/*
@ -91,15 +85,29 @@ __visible noinstr void do_int80_syscall_32(struct pt_regs *regs)
{
unsigned int nr = syscall_32_enter(regs);
/*
* Subtlety here: if ptrace pokes something larger than 2^32-1 into
* orig_ax, the unsigned int return value truncates it. This may
* or may not be necessary, but it matches the old asm behavior.
*/
nr = (unsigned int)syscall_enter_from_user_mode(regs, nr);
do_syscall_32_irqs_on(regs, nr);
syscall_exit_to_user_mode(regs);
}
static noinstr bool __do_fast_syscall_32(struct pt_regs *regs)
{
unsigned int nr = syscall_32_enter(regs);
unsigned int nr = syscall_32_enter(regs);
int res;
/*
* This cannot use syscall_enter_from_user_mode() as it has to
* fetch EBP before invoking any of the syscall entry work
* functions.
*/
syscall_enter_from_user_mode_prepare(regs);
instrumentation_begin();
/* Fetch EBP from where the vDSO stashed it. */
if (IS_ENABLED(CONFIG_X86_64)) {
@ -122,6 +130,9 @@ static noinstr bool __do_fast_syscall_32(struct pt_regs *regs)
return false;
}
/* The case truncates any ptrace induced syscall nr > 2^32 -1 */
nr = (unsigned int)syscall_enter_from_user_mode_work(regs, nr);
/* Now this is just like a normal syscall. */
do_syscall_32_irqs_on(regs, nr);
syscall_exit_to_user_mode(regs);

2
arch/x86/include/asm/acpi.h
View File

@ -159,8 +159,6 @@ static inline u64 x86_default_get_root_pointer(void)
extern int x86_acpi_numa_init(void);
#endif /* CONFIG_ACPI_NUMA */
#define acpi_unlazy_tlb(x) leave_mm(x)
#ifdef CONFIG_ACPI_APEI
static inline pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr)
{

12
arch/x86/include/asm/entry-common.h
View File

@ -18,8 +18,16 @@ static __always_inline void arch_check_user_regs(struct pt_regs *regs)
* state, not the interrupt state as imagined by Xen.
*/
unsigned long flags = native_save_fl();
WARN_ON_ONCE(flags & (X86_EFLAGS_AC | X86_EFLAGS_DF |
X86_EFLAGS_NT));
unsigned long mask = X86_EFLAGS_DF | X86_EFLAGS_NT;
/*
* For !SMAP hardware we patch out CLAC on entry.
*/
if (boot_cpu_has(X86_FEATURE_SMAP) ||
(IS_ENABLED(CONFIG_64_BIT) && boot_cpu_has(X86_FEATURE_XENPV)))
mask |= X86_EFLAGS_AC;
WARN_ON_ONCE(flags & mask);
/* We think we came from user mode. Make sure pt_regs agrees. */
WARN_ON_ONCE(!user_mode(regs));

19
arch/x86/include/asm/frame.h
View File

@ -60,12 +60,26 @@
#define FRAME_END "pop %" _ASM_BP "\n"
#ifdef CONFIG_X86_64
#define ENCODE_FRAME_POINTER \
"lea 1(%rsp), %rbp\n\t"
static inline unsigned long encode_frame_pointer(struct pt_regs *regs)
{
return (unsigned long)regs + 1;
}
#else /* !CONFIG_X86_64 */
#define ENCODE_FRAME_POINTER \
"movl %esp, %ebp\n\t" \
"andl $0x7fffffff, %ebp\n\t"
static inline unsigned long encode_frame_pointer(struct pt_regs *regs)
{
return (unsigned long)regs & 0x7fffffff;
}
#endif /* CONFIG_X86_64 */
#endif /* __ASSEMBLY__ */
@ -83,6 +97,11 @@
#define ENCODE_FRAME_POINTER
static inline unsigned long encode_frame_pointer(struct pt_regs *regs)
{
return 0;
}
#endif
#define FRAME_BEGIN

2
arch/x86/include/asm/ptrace.h
View File

@ -327,8 +327,8 @@ static inline unsigned long regs_get_kernel_argument(struct pt_regs *regs,
static const unsigned int argument_offs[] = {
#ifdef __i386__
offsetof(struct pt_regs, ax),
offsetof(struct pt_regs, cx),
offsetof(struct pt_regs, dx),
offsetof(struct pt_regs, cx),
#define NR_REG_ARGUMENTS 3
#else
offsetof(struct pt_regs, di),

4
arch/x86/kernel/kvm.c
View File

@ -270,9 +270,8 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_kvm_asyncpf_interrupt)
{
struct pt_regs *old_regs = set_irq_regs(regs);
u32 token;
irqentry_state_t state;
state = irqentry_enter(regs);
ack_APIC_irq();
inc_irq_stat(irq_hv_callback_count);
@ -283,7 +282,6 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_kvm_asyncpf_interrupt)
wrmsrl(MSR_KVM_ASYNC_PF_ACK, 1);
}
irqentry_exit(regs, state);
set_irq_regs(old_regs);
}

3
arch/x86/kernel/process.c
View File

@ -42,6 +42,7 @@
#include <asm/spec-ctrl.h>
#include <asm/io_bitmap.h>
#include <asm/proto.h>
#include <asm/frame.h>
#include "process.h"
@ -133,7 +134,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
fork_frame = container_of(childregs, struct fork_frame, regs);
frame = &fork_frame->frame;
frame->bp = 0;
frame->bp = encode_frame_pointer(childregs);
frame->ret_addr = (unsigned long) ret_from_fork;
p->thread.sp = (unsigned long) fork_frame;
p->thread.io_bitmap = NULL;

65
arch/x86/kernel/traps.c
View File

@ -729,20 +729,9 @@ static bool is_sysenter_singlestep(struct pt_regs *regs)
#endif
}
static __always_inline void debug_enter(unsigned long *dr6, unsigned long *dr7)
static __always_inline unsigned long debug_read_clear_dr6(void)
{
/*
* Disable breakpoints during exception handling; recursive exceptions
* are exceedingly 'fun'.
*
* Since this function is NOKPROBE, and that also applies to
* HW_BREAKPOINT_X, we can't hit a breakpoint before this (XXX except a
* HW_BREAKPOINT_W on our stack)
*
* Entry text is excluded for HW_BP_X and cpu_entry_area, which
* includes the entry stack is excluded for everything.
*/
*dr7 = local_db_save();
unsigned long dr6;
/*
* The Intel SDM says:
@ -755,15 +744,12 @@ static __always_inline void debug_enter(unsigned long *dr6, unsigned long *dr7)
*
* Keep it simple: clear DR6 immediately.
*/
get_debugreg(*dr6, 6);
get_debugreg(dr6, 6);
set_debugreg(0, 6);
/* Filter out all the reserved bits which are preset to 1 */
*dr6 &= ~DR6_RESERVED;
}
dr6 &= ~DR6_RESERVED;
static __always_inline void debug_exit(unsigned long dr7)
{
local_db_restore(dr7);
return dr6;
}
/*
@ -863,6 +849,18 @@ static void handle_debug(struct pt_regs *regs, unsigned long dr6, bool user)
static __always_inline void exc_debug_kernel(struct pt_regs *regs,
unsigned long dr6)
{
/*
* Disable breakpoints during exception handling; recursive exceptions
* are exceedingly 'fun'.
*
* Since this function is NOKPROBE, and that also applies to
* HW_BREAKPOINT_X, we can't hit a breakpoint before this (XXX except a
* HW_BREAKPOINT_W on our stack)
*
* Entry text is excluded for HW_BP_X and cpu_entry_area, which
* includes the entry stack is excluded for everything.
*/
unsigned long dr7 = local_db_save();
bool irq_state = idtentry_enter_nmi(regs);
instrumentation_begin();
@ -883,6 +881,8 @@ static __always_inline void exc_debug_kernel(struct pt_regs *regs,
instrumentation_end();
idtentry_exit_nmi(regs, irq_state);
local_db_restore(dr7);
}
static __always_inline void exc_debug_user(struct pt_regs *regs,
@ -894,6 +894,15 @@ static __always_inline void exc_debug_user(struct pt_regs *regs,
*/
WARN_ON_ONCE(!user_mode(regs));
/*
* NB: We can't easily clear DR7 here because
* idtentry_exit_to_usermode() can invoke ptrace, schedule, access
* user memory, etc. This means that a recursive #DB is possible. If
* this happens, that #DB will hit exc_debug_kernel() and clear DR7.
* Since we're not on the IST stack right now, everything will be
* fine.
*/
irqentry_enter_from_user_mode(regs);
instrumentation_begin();
@ -907,36 +916,24 @@ static __always_inline void exc_debug_user(struct pt_regs *regs,
/* IST stack entry */
DEFINE_IDTENTRY_DEBUG(exc_debug)
{
unsigned long dr6, dr7;
debug_enter(&dr6, &dr7);
exc_debug_kernel(regs, dr6);
debug_exit(dr7);
exc_debug_kernel(regs, debug_read_clear_dr6());
}
/* User entry, runs on regular task stack */
DEFINE_IDTENTRY_DEBUG_USER(exc_debug)
{
unsigned long dr6, dr7;
debug_enter(&dr6, &dr7);
exc_debug_user(regs, dr6);
debug_exit(dr7);
exc_debug_user(regs, debug_read_clear_dr6());
}
#else
/* 32 bit does not have separate entry points. */
DEFINE_IDTENTRY_RAW(exc_debug)
{
unsigned long dr6, dr7;
debug_enter(&dr6, &dr7);
unsigned long dr6 = debug_read_clear_dr6();
if (user_mode(regs))
exc_debug_user(regs, dr6);
else
exc_debug_kernel(regs, dr6);
debug_exit(dr7);
}
#endif

22
arch/x86/kvm/emulate.c
View File

@ -2505,9 +2505,14 @@ static int rsm_load_state_32(struct x86_emulate_ctxt *ctxt,
*reg_write(ctxt, i) = GET_SMSTATE(u32, smstate, 0x7fd0 + i * 4);
val = GET_SMSTATE(u32, smstate, 0x7fcc);
ctxt->ops->set_dr(ctxt, 6, (val & DR6_VOLATILE) | DR6_FIXED_1);
if (ctxt->ops->set_dr(ctxt, 6, (val & DR6_VOLATILE) | DR6_FIXED_1))
return X86EMUL_UNHANDLEABLE;
val = GET_SMSTATE(u32, smstate, 0x7fc8);
ctxt->ops->set_dr(ctxt, 7, (val & DR7_VOLATILE) | DR7_FIXED_1);
if (ctxt->ops->set_dr(ctxt, 7, (val & DR7_VOLATILE) | DR7_FIXED_1))
return X86EMUL_UNHANDLEABLE;
selector = GET_SMSTATE(u32, smstate, 0x7fc4);
set_desc_base(&desc, GET_SMSTATE(u32, smstate, 0x7f64));
@ -2560,16 +2565,23 @@ static int rsm_load_state_64(struct x86_emulate_ctxt *ctxt,
ctxt->eflags = GET_SMSTATE(u32, smstate, 0x7f70) | X86_EFLAGS_FIXED;
val = GET_SMSTATE(u32, smstate, 0x7f68);
ctxt->ops->set_dr(ctxt, 6, (val & DR6_VOLATILE) | DR6_FIXED_1);
if (ctxt->ops->set_dr(ctxt, 6, (val & DR6_VOLATILE) | DR6_FIXED_1))
return X86EMUL_UNHANDLEABLE;
val = GET_SMSTATE(u32, smstate, 0x7f60);
ctxt->ops->set_dr(ctxt, 7, (val & DR7_VOLATILE) | DR7_FIXED_1);
if (ctxt->ops->set_dr(ctxt, 7, (val & DR7_VOLATILE) | DR7_FIXED_1))
return X86EMUL_UNHANDLEABLE;
cr0 = GET_SMSTATE(u64, smstate, 0x7f58);
cr3 = GET_SMSTATE(u64, smstate, 0x7f50);
cr4 = GET_SMSTATE(u64, smstate, 0x7f48);
ctxt->ops->set_smbase(ctxt, GET_SMSTATE(u32, smstate, 0x7f00));
val = GET_SMSTATE(u64, smstate, 0x7ed0);
ctxt->ops->set_msr(ctxt, MSR_EFER, val & ~EFER_LMA);
if (ctxt->ops->set_msr(ctxt, MSR_EFER, val & ~EFER_LMA))
return X86EMUL_UNHANDLEABLE;
selector = GET_SMSTATE(u32, smstate, 0x7e90);
rsm_set_desc_flags(&desc, GET_SMSTATE(u32, smstate, 0x7e92) << 8);

Some files were not shown because too many files have changed in this diff Show More