mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 06:30:53 +07:00
[ARM] pxa: move common GPIO handling code into plat-pxa
1. add common GPIO handling code into [arch/arm/plat-pxa]
2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors
should implement its own <mach/gpio.h>, provide the following required
definitions and '#include <plat/gpio.h>' in the end:
- GPIO_REGS_VIRT for mapped virtual address of the GPIO registers'
physical I/O memory
- macros of GPLR(), GPSR(), GPDR() for constant optimization for
functions gpio_{set,get}_value() (so that bit-bang code can still
have tolerable performance)
- NR_BUILTIN_GPIO for the number of onchip GPIO
- definitions of __gpio_is_inverted() and __gpio_is_occupied(), they
can be either macros or inlined functions
Signed-off-by: Eric Miao <eric.miao@marvell.com>
This commit is contained in:
Eric Miao
parent
bd5ce43323
commit
38f539a608
@ -4,7 +4,7 @@
|
||||
|
||||
# Common support (must be linked before board specific support)
|
||||
obj-y += clock.o devices.o generic.o irq.o \
|
||||
time.o gpio.o reset.o
|
||||
time.o reset.o
|
||||
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
|
||||
|
||||
ifeq ($(CONFIG_CPU_FREQ),y)
|
||||
|
||||
@ -99,40 +99,12 @@
|
||||
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
|
||||
|
||||
|
||||
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
|
||||
* Those cases currently cause holes in the GPIO number space, the
|
||||
* actual number of the last GPIO is recorded by 'pxa_last_gpio'.
|
||||
*/
|
||||
extern int pxa_last_gpio;
|
||||
|
||||
#define NR_BUILTIN_GPIO 128
|
||||
|
||||
static inline int gpio_get_value(unsigned gpio)
|
||||
{
|
||||
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
|
||||
return GPLR(gpio) & GPIO_bit(gpio);
|
||||
else
|
||||
return __gpio_get_value(gpio);
|
||||
}
|
||||
|
||||
static inline void gpio_set_value(unsigned gpio, int value)
|
||||
{
|
||||
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
|
||||
if (value)
|
||||
GPSR(gpio) = GPIO_bit(gpio);
|
||||
else
|
||||
GPCR(gpio) = GPIO_bit(gpio);
|
||||
} else {
|
||||
__gpio_set_value(gpio, value);
|
||||
}
|
||||
}
|
||||
|
||||
#define gpio_cansleep __gpio_cansleep
|
||||
#define gpio_to_bank(gpio) ((gpio) >> 5)
|
||||
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
|
||||
#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
|
||||
|
||||
|
||||
#ifdef CONFIG_CPU_PXA26x
|
||||
/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
|
||||
* as well as their Alternate Function value being '1' for GPIO in GAFRx.
|
||||
@ -165,7 +137,5 @@ static inline int __gpio_is_occupied(unsigned gpio)
|
||||
return GPDR(gpio) & GPIO_bit(gpio);
|
||||
}
|
||||
|
||||
typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
|
||||
|
||||
extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
|
||||
#include <plat/gpio.h>
|
||||
#endif
|
||||
|
||||
@ -4,3 +4,4 @@
|
||||
|
||||
obj-y := dma.o
|
||||
|
||||
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* linux/arch/arm/mach-pxa/gpio.c
|
||||
* linux/arch/arm/plat-pxa/gpio.c
|
||||
*
|
||||
* Generic PXA GPIO handling
|
||||
*
|
||||
@ -22,34 +22,6 @@
|
||||
|
||||
int pxa_last_gpio;
|
||||
|
||||
/*
|
||||
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
|
||||
* one set of registers. The register offsets are organized below:
|
||||
*
|
||||
* GPLR GPDR GPSR GPCR GRER GFER GEDR
|
||||
* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
|
||||
* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
|
||||
* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
|
||||
*
|
||||
* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
|
||||
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
|
||||
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
|
||||
*
|
||||
* NOTE:
|
||||
* BANK 3 is only available on PXA27x and later processors.
|
||||
* BANK 4 and 5 are only available on PXA935
|
||||
*/
|
||||
|
||||
#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
|
||||
|
||||
#define GPLR_OFFSET 0x00
|
||||
#define GPDR_OFFSET 0x0C
|
||||
#define GPSR_OFFSET 0x18
|
||||
#define GPCR_OFFSET 0x24
|
||||
#define GRER_OFFSET 0x30
|
||||
#define GFER_OFFSET 0x3C
|
||||
#define GEDR_OFFSET 0x48
|
||||
|
||||
struct pxa_gpio_chip {
|
||||
struct gpio_chip chip;
|
||||
void __iomem *regbase;
|
||||
62
arch/arm/plat-pxa/include/plat/gpio.h
Normal file
62
arch/arm/plat-pxa/include/plat/gpio.h
Normal file
@ -0,0 +1,62 @@
|
||||
#ifndef __PLAT_GPIO_H
|
||||
#define __PLAT_GPIO_H
|
||||
|
||||
/*
|
||||
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
|
||||
* one set of registers. The register offsets are organized below:
|
||||
*
|
||||
* GPLR GPDR GPSR GPCR GRER GFER GEDR
|
||||
* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
|
||||
* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
|
||||
* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
|
||||
*
|
||||
* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
|
||||
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
|
||||
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
|
||||
*
|
||||
* NOTE:
|
||||
* BANK 3 is only available on PXA27x and later processors.
|
||||
* BANK 4 and 5 are only available on PXA935
|
||||
*/
|
||||
|
||||
#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
|
||||
|
||||
#define GPLR_OFFSET 0x00
|
||||
#define GPDR_OFFSET 0x0C
|
||||
#define GPSR_OFFSET 0x18
|
||||
#define GPCR_OFFSET 0x24
|
||||
#define GRER_OFFSET 0x30
|
||||
#define GFER_OFFSET 0x3C
|
||||
#define GEDR_OFFSET 0x48
|
||||
|
||||
static inline int gpio_get_value(unsigned gpio)
|
||||
{
|
||||
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
|
||||
return GPLR(gpio) & GPIO_bit(gpio);
|
||||
else
|
||||
return __gpio_get_value(gpio);
|
||||
}
|
||||
|
||||
static inline void gpio_set_value(unsigned gpio, int value)
|
||||
{
|
||||
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
|
||||
if (value)
|
||||
GPSR(gpio) = GPIO_bit(gpio);
|
||||
else
|
||||
GPCR(gpio) = GPIO_bit(gpio);
|
||||
} else
|
||||
__gpio_set_value(gpio, value);
|
||||
}
|
||||
|
||||
#define gpio_cansleep __gpio_cansleep
|
||||
|
||||
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
|
||||
* Those cases currently cause holes in the GPIO number space, the
|
||||
* actual number of the last GPIO is recorded by 'pxa_last_gpio'.
|
||||
*/
|
||||
extern int pxa_last_gpio;
|
||||
|
||||
typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
|
||||
|
||||
extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
|
||||
#endif /* __PLAT_GPIO_H */
|
||||
Loading…
Reference in New Issue
Block a user