mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 00:40:56 +07:00
regulator: Add LTC3676 support
This patch adds support for the Linear Technology LTC3676 8-output I2C voltage regulator IC. Cc: Jaffer Kapasi <jkapasi@linear.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Tim Harvey
Mark Brown
parent
29b4817d40
commit
37b918a034
94
Documentation/devicetree/bindings/regulator/ltc3676.txt
Normal file
94
Documentation/devicetree/bindings/regulator/ltc3676.txt
Normal file
@ -0,0 +1,94 @@
|
|||||||
|
Linear Technology LTC3676 8-output regulators
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible: "lltc,ltc3676"
|
||||||
|
- reg: I2C slave address
|
||||||
|
|
||||||
|
Required child node:
|
||||||
|
- regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4,
|
||||||
|
ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
|
||||||
|
documented in Documentation/devicetree/bindings/regulator/regulator.txt.
|
||||||
|
|
||||||
|
Each regulator is defined using the standard binding for regulators. The
|
||||||
|
nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify
|
||||||
|
the resistor values of their external feedback voltage dividers:
|
||||||
|
|
||||||
|
Required properties (not on ldo3):
|
||||||
|
- lltc,fb-voltage-divider: An array of two integers containing the resistor
|
||||||
|
values R1 and R2 of the feedback voltage divider in ohms.
|
||||||
|
|
||||||
|
Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from:
|
||||||
|
412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between
|
||||||
|
0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V.
|
||||||
|
|
||||||
|
Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output
|
||||||
|
0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby
|
||||||
|
regulator can not be disabled and thus should have the regulator-always-on
|
||||||
|
property set.
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
ltc3676: pmic@3c {
|
||||||
|
compatible = "lltc,ltc3676";
|
||||||
|
reg = <0x3c>;
|
||||||
|
|
||||||
|
regulators {
|
||||||
|
sw1_reg: sw1 {
|
||||||
|
regulator-min-microvolt = <674400>;
|
||||||
|
regulator-max-microvolt = <1308000>;
|
||||||
|
lltc,fb-voltage-divider = <127000 200000>;
|
||||||
|
regulator-ramp-delay = <7000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
sw2_reg: sw2 {
|
||||||
|
regulator-min-microvolt = <1033310>;
|
||||||
|
regulator-max-microvolt = <200400>;
|
||||||
|
lltc,fb-voltage-divider = <301000 200000>;
|
||||||
|
regulator-ramp-delay = <7000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
sw3_reg: sw3 {
|
||||||
|
regulator-min-microvolt = <674400>;
|
||||||
|
regulator-max-microvolt = <130800>;
|
||||||
|
lltc,fb-voltage-divider = <127000 200000>;
|
||||||
|
regulator-ramp-delay = <7000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
sw4_reg: sw4 {
|
||||||
|
regulator-min-microvolt = <868310>;
|
||||||
|
regulator-max-microvolt = <168400>;
|
||||||
|
lltc,fb-voltage-divider = <221000 200000>;
|
||||||
|
regulator-ramp-delay = <7000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
ldo2_reg: ldo2 {
|
||||||
|
regulator-min-microvolt = <2490375>;
|
||||||
|
regulator-max-microvolt = <2490375>;
|
||||||
|
lltc,fb-voltage-divider = <487000 200000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
ldo3_reg: ldo3 {
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
ldo4_reg: ldo4 {
|
||||||
|
regulator-min-microvolt = <3023250>;
|
||||||
|
regulator-max-microvolt = <3023250>;
|
||||||
|
lltc,fb-voltage-divider = <634000 200000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
@ -353,6 +353,14 @@ config REGULATOR_LTC3589
|
|||||||
This enables support for the LTC3589, LTC3589-1, and LTC3589-2
|
This enables support for the LTC3589, LTC3589-1, and LTC3589-2
|
||||||
8-output regulators controlled via I2C.
|
8-output regulators controlled via I2C.
|
||||||
|
|
||||||
|
config REGULATOR_LTC3676
|
||||||
|
tristate "LTC3676 8-output voltage regulator"
|
||||||
|
depends on I2C
|
||||||
|
select REGMAP_I2C
|
||||||
|
help
|
||||||
|
This enables support for the LTC3676
|
||||||
|
8-output regulators controlled via I2C.
|
||||||
|
|
||||||
config REGULATOR_MAX14577
|
config REGULATOR_MAX14577
|
||||||
tristate "Maxim 14577/77836 regulator"
|
tristate "Maxim 14577/77836 regulator"
|
||||||
depends on MFD_MAX14577
|
depends on MFD_MAX14577
|
||||||
|
|||||||
@ -47,6 +47,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
|
|||||||
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
|
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
|
||||||
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
|
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
|
||||||
obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
|
obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
|
||||||
|
obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
|
||||||
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
|
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
|
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
|
||||||
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
|
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
|
||||||
|
|||||||
420
drivers/regulator/ltc3676.c
Normal file
420
drivers/regulator/ltc3676.c
Normal file
@ -0,0 +1,420 @@
|
|||||||
|
/*
|
||||||
|
* Copyright (C) 2016 Gateworks Corporation, Inc. All Rights Reserved.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2
|
||||||
|
* as published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
#include <linux/regmap.h>
|
||||||
|
#include <linux/regulator/driver.h>
|
||||||
|
#include <linux/regulator/machine.h>
|
||||||
|
#include <linux/regulator/of_regulator.h>
|
||||||
|
|
||||||
|
#define DRIVER_NAME "ltc3676"
|
||||||
|
|
||||||
|
/* LTC3676 Registers */
|
||||||
|
#define LTC3676_BUCK1 0x01
|
||||||
|
#define LTC3676_BUCK2 0x02
|
||||||
|
#define LTC3676_BUCK3 0x03
|
||||||
|
#define LTC3676_BUCK4 0x04
|
||||||
|
#define LTC3676_LDOA 0x05
|
||||||
|
#define LTC3676_LDOB 0x06
|
||||||
|
#define LTC3676_SQD1 0x07
|
||||||
|
#define LTC3676_SQD2 0x08
|
||||||
|
#define LTC3676_CNTRL 0x09
|
||||||
|
#define LTC3676_DVB1A 0x0A
|
||||||
|
#define LTC3676_DVB1B 0x0B
|
||||||
|
#define LTC3676_DVB2A 0x0C
|
||||||
|
#define LTC3676_DVB2B 0x0D
|
||||||
|
#define LTC3676_DVB3A 0x0E
|
||||||
|
#define LTC3676_DVB3B 0x0F
|
||||||
|
#define LTC3676_DVB4A 0x10
|
||||||
|
#define LTC3676_DVB4B 0x11
|
||||||
|
#define LTC3676_MSKIRQ 0x12
|
||||||
|
#define LTC3676_MSKPG 0x13
|
||||||
|
#define LTC3676_USER 0x14
|
||||||
|
#define LTC3676_IRQSTAT 0x15
|
||||||
|
#define LTC3676_PGSTATL 0x16
|
||||||
|
#define LTC3676_PGSTATRT 0x17
|
||||||
|
#define LTC3676_HRST 0x1E
|
||||||
|
#define LTC3676_CLIRQ 0x1F
|
||||||
|
|
||||||
|
#define LTC3676_DVBxA_REF_SELECT BIT(5)
|
||||||
|
|
||||||
|
#define LTC3676_IRQSTAT_PGOOD_TIMEOUT BIT(3)
|
||||||
|
#define LTC3676_IRQSTAT_UNDERVOLT_WARN BIT(4)
|
||||||
|
#define LTC3676_IRQSTAT_UNDERVOLT_FAULT BIT(5)
|
||||||
|
#define LTC3676_IRQSTAT_THERMAL_WARN BIT(6)
|
||||||
|
#define LTC3676_IRQSTAT_THERMAL_FAULT BIT(7)
|
||||||
|
|
||||||
|
enum ltc3676_reg {
|
||||||
|
LTC3676_SW1,
|
||||||
|
LTC3676_SW2,
|
||||||
|
LTC3676_SW3,
|
||||||
|
LTC3676_SW4,
|
||||||
|
LTC3676_LDO1,
|
||||||
|
LTC3676_LDO2,
|
||||||
|
LTC3676_LDO3,
|
||||||
|
LTC3676_LDO4,
|
||||||
|
LTC3676_NUM_REGULATORS,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct ltc3676 {
|
||||||
|
struct regmap *regmap;
|
||||||
|
struct device *dev;
|
||||||
|
struct regulator_desc regulator_descs[LTC3676_NUM_REGULATORS];
|
||||||
|
struct regulator_dev *regulators[LTC3676_NUM_REGULATORS];
|
||||||
|
};
|
||||||
|
|
||||||
|
static int ltc3676_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
||||||
|
{
|
||||||
|
struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev);
|
||||||
|
struct device *dev = ltc3676->dev;
|
||||||
|
int dcdc = rdev_get_id(rdev);
|
||||||
|
int sel;
|
||||||
|
|
||||||
|
dev_dbg(dev, "%s id=%d uV=%d\n", __func__, dcdc, uV);
|
||||||
|
sel = regulator_map_voltage_linear(rdev, uV, uV);
|
||||||
|
if (sel < 0)
|
||||||
|
return sel;
|
||||||
|
|
||||||
|
/* DVBB register follows right after the corresponding DVBA register */
|
||||||
|
return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1,
|
||||||
|
rdev->desc->vsel_mask, sel);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ltc3676_set_suspend_mode(struct regulator_dev *rdev,
|
||||||
|
unsigned int mode)
|
||||||
|
{
|
||||||
|
struct ltc3676 *ltc3676= rdev_get_drvdata(rdev);
|
||||||
|
struct device *dev = ltc3676->dev;
|
||||||
|
int mask, val;
|
||||||
|
int dcdc = rdev_get_id(rdev);
|
||||||
|
|
||||||
|
dev_dbg(dev, "%s id=%d mode=%d\n", __func__, dcdc, mode);
|
||||||
|
|
||||||
|
mask = LTC3676_DVBxA_REF_SELECT;
|
||||||
|
switch (mode) {
|
||||||
|
case REGULATOR_MODE_STANDBY:
|
||||||
|
val = 0; /* select DVBxA */
|
||||||
|
break;
|
||||||
|
case REGULATOR_MODE_NORMAL:
|
||||||
|
val = LTC3676_DVBxA_REF_SELECT; /* select DVBxB */
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
|
||||||
|
rdev->desc->name, mode);
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg,
|
||||||
|
mask, val);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline unsigned int ltc3676_scale(unsigned int uV, u32 r1, u32 r2)
|
||||||
|
{
|
||||||
|
uint64_t tmp;
|
||||||
|
if (uV == 0)
|
||||||
|
return 0;
|
||||||
|
tmp = (uint64_t)uV * r1;
|
||||||
|
do_div(tmp, r2);
|
||||||
|
return uV + (unsigned int)tmp;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ltc3676_of_parse_cb(struct device_node *np,
|
||||||
|
const struct regulator_desc *desc,
|
||||||
|
struct regulator_config *config)
|
||||||
|
{
|
||||||
|
struct ltc3676 *ltc3676 = config->driver_data;
|
||||||
|
struct regulator_desc *rdesc = <c3676->regulator_descs[desc->id];
|
||||||
|
u32 r[2];
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/* LDO3 has a fixed output */
|
||||||
|
if (desc->id == LTC3676_LDO3)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", r, 2);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(ltc3676->dev, "Failed to parse voltage divider: %d\n",
|
||||||
|
ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
rdesc->min_uV = ltc3676_scale(desc->min_uV, r[0], r[1]);
|
||||||
|
rdesc->uV_step = ltc3676_scale(desc->uV_step, r[0], r[1]);
|
||||||
|
rdesc->fixed_uV = ltc3676_scale(desc->fixed_uV, r[0], r[1]);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */
|
||||||
|
static struct regulator_ops ltc3676_linear_regulator_ops = {
|
||||||
|
.enable = regulator_enable_regmap,
|
||||||
|
.disable = regulator_disable_regmap,
|
||||||
|
.is_enabled = regulator_is_enabled_regmap,
|
||||||
|
.list_voltage = regulator_list_voltage_linear,
|
||||||
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||||
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||||
|
.set_suspend_voltage = ltc3676_set_suspend_voltage,
|
||||||
|
.set_suspend_mode = ltc3676_set_suspend_mode,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */
|
||||||
|
static struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
|
||||||
|
};
|
||||||
|
|
||||||
|
/* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
|
||||||
|
static struct regulator_ops ltc3676_fixed_regulator_ops = {
|
||||||
|
.enable = regulator_enable_regmap,
|
||||||
|
.disable = regulator_disable_regmap,
|
||||||
|
.is_enabled = regulator_is_enabled_regmap,
|
||||||
|
};
|
||||||
|
|
||||||
|
#define LTC3676_REG(_id, _name, _ops, en_reg, en_bit, dvba_reg, dvb_mask) \
|
||||||
|
[LTC3676_ ## _id] = { \
|
||||||
|
.name = #_name, \
|
||||||
|
.of_match = of_match_ptr(#_name), \
|
||||||
|
.regulators_node = of_match_ptr("regulators"), \
|
||||||
|
.of_parse_cb = ltc3676_of_parse_cb, \
|
||||||
|
.n_voltages = (dvb_mask) + 1, \
|
||||||
|
.min_uV = (dvba_reg) ? 412500 : 0, \
|
||||||
|
.uV_step = (dvba_reg) ? 12500 : 0, \
|
||||||
|
.ramp_delay = (dvba_reg) ? 800 : 0, \
|
||||||
|
.fixed_uV = (dvb_mask) ? 0 : 725000, \
|
||||||
|
.ops = <c3676_ ## _ops ## _regulator_ops, \
|
||||||
|
.type = REGULATOR_VOLTAGE, \
|
||||||
|
.id = LTC3676_ ## _id, \
|
||||||
|
.owner = THIS_MODULE, \
|
||||||
|
.vsel_reg = (dvba_reg), \
|
||||||
|
.vsel_mask = (dvb_mask), \
|
||||||
|
.enable_reg = (en_reg), \
|
||||||
|
.enable_mask = (1 << en_bit), \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define LTC3676_LINEAR_REG(_id, _name, _en, _dvba) \
|
||||||
|
LTC3676_REG(_id, _name, linear, \
|
||||||
|
LTC3676_ ## _en, 7, \
|
||||||
|
LTC3676_ ## _dvba, 0x1f)
|
||||||
|
|
||||||
|
#define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit) \
|
||||||
|
LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0)
|
||||||
|
|
||||||
|
static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
|
||||||
|
LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A),
|
||||||
|
LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A),
|
||||||
|
LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A),
|
||||||
|
LTC3676_LINEAR_REG(SW4, sw4, BUCK4, DVB4A),
|
||||||
|
LTC3676_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0),
|
||||||
|
LTC3676_FIXED_REG(LDO2, ldo2, LDOA, 2),
|
||||||
|
LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5),
|
||||||
|
LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2),
|
||||||
|
};
|
||||||
|
|
||||||
|
static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg)
|
||||||
|
{
|
||||||
|
switch (reg) {
|
||||||
|
case LTC3676_IRQSTAT:
|
||||||
|
case LTC3676_BUCK1:
|
||||||
|
case LTC3676_BUCK2:
|
||||||
|
case LTC3676_BUCK3:
|
||||||
|
case LTC3676_BUCK4:
|
||||||
|
case LTC3676_LDOA:
|
||||||
|
case LTC3676_LDOB:
|
||||||
|
case LTC3676_SQD1:
|
||||||
|
case LTC3676_SQD2:
|
||||||
|
case LTC3676_CNTRL:
|
||||||
|
case LTC3676_DVB1A:
|
||||||
|
case LTC3676_DVB1B:
|
||||||
|
case LTC3676_DVB2A:
|
||||||
|
case LTC3676_DVB2B:
|
||||||
|
case LTC3676_DVB3A:
|
||||||
|
case LTC3676_DVB3B:
|
||||||
|
case LTC3676_DVB4A:
|
||||||
|
case LTC3676_DVB4B:
|
||||||
|
case LTC3676_MSKIRQ:
|
||||||
|
case LTC3676_MSKPG:
|
||||||
|
case LTC3676_USER:
|
||||||
|
case LTC3676_HRST:
|
||||||
|
case LTC3676_CLIRQ:
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
|
||||||
|
{
|
||||||
|
switch (reg) {
|
||||||
|
case LTC3676_IRQSTAT:
|
||||||
|
case LTC3676_BUCK1:
|
||||||
|
case LTC3676_BUCK2:
|
||||||
|
case LTC3676_BUCK3:
|
||||||
|
case LTC3676_BUCK4:
|
||||||
|
case LTC3676_LDOA:
|
||||||
|
case LTC3676_LDOB:
|
||||||
|
case LTC3676_SQD1:
|
||||||
|
case LTC3676_SQD2:
|
||||||
|
case LTC3676_CNTRL:
|
||||||
|
case LTC3676_DVB1A:
|
||||||
|
case LTC3676_DVB1B:
|
||||||
|
case LTC3676_DVB2A:
|
||||||
|
case LTC3676_DVB2B:
|
||||||
|
case LTC3676_DVB3A:
|
||||||
|
case LTC3676_DVB3B:
|
||||||
|
case LTC3676_DVB4A:
|
||||||
|
case LTC3676_DVB4B:
|
||||||
|
case LTC3676_MSKIRQ:
|
||||||
|
case LTC3676_MSKPG:
|
||||||
|
case LTC3676_USER:
|
||||||
|
case LTC3676_HRST:
|
||||||
|
case LTC3676_CLIRQ:
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
|
||||||
|
{
|
||||||
|
switch (reg) {
|
||||||
|
case LTC3676_IRQSTAT:
|
||||||
|
case LTC3676_PGSTATL:
|
||||||
|
case LTC3676_PGSTATRT:
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct regmap_config ltc3676_regmap_config = {
|
||||||
|
.reg_bits = 8,
|
||||||
|
.val_bits = 8,
|
||||||
|
.writeable_reg = ltc3676_writeable_reg,
|
||||||
|
.readable_reg = ltc3676_readable_reg,
|
||||||
|
.volatile_reg = ltc3676_volatile_reg,
|
||||||
|
.max_register = LTC3676_CLIRQ,
|
||||||
|
.use_single_rw = true,
|
||||||
|
.cache_type = REGCACHE_RBTREE,
|
||||||
|
};
|
||||||
|
|
||||||
|
static irqreturn_t ltc3676_isr(int irq, void *dev_id)
|
||||||
|
{
|
||||||
|
struct ltc3676 *ltc3676 = dev_id;
|
||||||
|
struct device *dev = ltc3676->dev;
|
||||||
|
unsigned int i, irqstat, event;
|
||||||
|
|
||||||
|
regmap_read(ltc3676->regmap, LTC3676_IRQSTAT, &irqstat);
|
||||||
|
|
||||||
|
dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat);
|
||||||
|
if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) {
|
||||||
|
dev_warn(dev, "Over-temperature Warning\n");
|
||||||
|
event = REGULATOR_EVENT_OVER_TEMP;
|
||||||
|
for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
|
||||||
|
regulator_notifier_call_chain(ltc3676->regulators[i],
|
||||||
|
event, NULL);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (irqstat & LTC3676_IRQSTAT_UNDERVOLT_WARN) {
|
||||||
|
dev_info(dev, "Undervoltage Warning\n");
|
||||||
|
event = REGULATOR_EVENT_UNDER_VOLTAGE;
|
||||||
|
for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
|
||||||
|
regulator_notifier_call_chain(ltc3676->regulators[i],
|
||||||
|
event, NULL);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Clear warning condition */
|
||||||
|
regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
|
||||||
|
|
||||||
|
return IRQ_HANDLED;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int ltc3676_regulator_probe(struct i2c_client *client,
|
||||||
|
const struct i2c_device_id *id)
|
||||||
|
{
|
||||||
|
struct device *dev = &client->dev;
|
||||||
|
struct regulator_init_data *init_data = dev_get_platdata(dev);
|
||||||
|
struct regulator_desc *descs;
|
||||||
|
struct ltc3676 *ltc3676;
|
||||||
|
int i, ret;
|
||||||
|
|
||||||
|
ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL);
|
||||||
|
if (!ltc3676)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
i2c_set_clientdata(client, ltc3676);
|
||||||
|
ltc3676->dev = dev;
|
||||||
|
|
||||||
|
descs = ltc3676->regulator_descs;
|
||||||
|
memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators));
|
||||||
|
descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */
|
||||||
|
|
||||||
|
ltc3676->regmap = devm_regmap_init_i2c(client, <c3676_regmap_config);
|
||||||
|
if (IS_ERR(ltc3676->regmap)) {
|
||||||
|
ret = PTR_ERR(ltc3676->regmap);
|
||||||
|
dev_err(dev, "failed to initialize regmap: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
|
||||||
|
struct regulator_desc *desc = <c3676->regulator_descs[i];
|
||||||
|
struct regulator_config config = { };
|
||||||
|
|
||||||
|
if (init_data)
|
||||||
|
config.init_data = &init_data[i];
|
||||||
|
|
||||||
|
config.dev = dev;
|
||||||
|
config.driver_data = ltc3676;
|
||||||
|
|
||||||
|
ltc3676->regulators[i] = devm_regulator_register(dev, desc,
|
||||||
|
&config);
|
||||||
|
if (IS_ERR(ltc3676->regulators[i])) {
|
||||||
|
ret = PTR_ERR(ltc3676->regulators[i]);
|
||||||
|
dev_err(dev, "failed to register regulator %s: %d\n",
|
||||||
|
desc->name, ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
|
||||||
|
if (client->irq) {
|
||||||
|
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
||||||
|
ltc3676_isr,
|
||||||
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
||||||
|
client->name, ltc3676);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Failed to request IRQ: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct i2c_device_id ltc3676_i2c_id[] = {
|
||||||
|
{ "ltc3676" },
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(i2c, ltc3676_i2c_id);
|
||||||
|
|
||||||
|
static struct i2c_driver ltc3676_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = DRIVER_NAME,
|
||||||
|
},
|
||||||
|
.probe = ltc3676_regulator_probe,
|
||||||
|
.id_table = ltc3676_i2c_id,
|
||||||
|
};
|
||||||
|
module_i2c_driver(ltc3676_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
|
||||||
|
MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376");
|
||||||
|
MODULE_LICENSE("GPL v2");
|
||||||
Loading…
Reference in New Issue
Block a user