net: TCP thin linear timeouts

This patch will make TCP use only linear timeouts if the
stream is thin. This will help to avoid the very high latencies
that thin stream suffer because of exponential backoff. This
mechanism is only active if enabled by iocontrol or syscontrol
and the stream is identified as thin. A maximum of 6 linear
timeouts is tried before exponential backoff is resumed.

Signed-off-by: Andreas Petlund <apetlund@simula.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Andreas Petlund 2010-02-18 02:47:01 +00:00 committed by David S. Miller
parent 5aa4b32fc8
commit 36e31b0af5
6 changed files with 54 additions and 2 deletions

View File

@ -487,6 +487,18 @@ tcp_dma_copybreak - INTEGER
and CONFIG_NET_DMA is enabled.
Default: 4096
tcp_thin_linear_timeouts - BOOLEAN
Enable dynamic triggering of linear timeouts for thin streams.
If set, a check is performed upon retransmission by timeout to
determine if the stream is thin (less than 4 packets in flight).
As long as the stream is found to be thin, up to 6 linear
timeouts may be performed before exponential backoff mode is
initiated. This improves retransmission latency for
non-aggressive thin streams, often found to be time-dependent.
For more information on thin streams, see
Documentation/networking/tcp-thin.txt
Default: 0
UDP variables:
udp_mem - vector of 3 INTEGERs: min, pressure, max

View File

@ -103,6 +103,7 @@ enum {
#define TCP_CONGESTION 13 /* Congestion control algorithm */
#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */
#define TCP_COOKIE_TRANSACTIONS 15 /* TCP Cookie Transactions */
#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/
/* for TCP_INFO socket option */
#define TCPI_OPT_TIMESTAMPS 1
@ -340,7 +341,9 @@ struct tcp_sock {
u32 frto_highmark; /* snd_nxt when RTO occurred */
u16 advmss; /* Advertised MSS */
u8 frto_counter; /* Number of new acks after RTO */
u8 nonagle; /* Disable Nagle algorithm? */
u8 nonagle : 4,/* Disable Nagle algorithm? */
thin_lto : 1,/* Use linear timeouts for thin streams */
unused : 3;
/* RTT measurement */
u32 srtt; /* smoothed round trip time << 3 */

View File

@ -196,6 +196,9 @@ extern void tcp_time_wait(struct sock *sk, int state, int timeo);
#define TCP_NAGLE_CORK 2 /* Socket is corked */
#define TCP_NAGLE_PUSH 4 /* Cork is overridden for already queued data */
/* TCP thin-stream limits */
#define TCP_THIN_LINEAR_RETRIES 6 /* After 6 linear retries, do exp. backoff */
extern struct inet_timewait_death_row tcp_death_row;
/* sysctl variables for tcp */
@ -241,6 +244,7 @@ extern int sysctl_tcp_workaround_signed_windows;
extern int sysctl_tcp_slow_start_after_idle;
extern int sysctl_tcp_max_ssthresh;
extern int sysctl_tcp_cookie_size;
extern int sysctl_tcp_thin_linear_timeouts;
extern atomic_t tcp_memory_allocated;
extern struct percpu_counter tcp_sockets_allocated;

View File

@ -575,6 +575,13 @@ static struct ctl_table ipv4_table[] = {
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "tcp_thin_linear_timeouts",
.data = &sysctl_tcp_thin_linear_timeouts,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
},
{
.procname = "udp_mem",
.data = &sysctl_udp_mem,

View File

@ -2229,6 +2229,13 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
}
break;
case TCP_THIN_LINEAR_TIMEOUTS:
if (val < 0 || val > 1)
err = -EINVAL;
else
tp->thin_lto = val;
break;
case TCP_CORK:
/* When set indicates to always queue non-full frames.
* Later the user clears this option and we transmit

View File

@ -29,6 +29,7 @@ int sysctl_tcp_keepalive_intvl __read_mostly = TCP_KEEPALIVE_INTVL;
int sysctl_tcp_retries1 __read_mostly = TCP_RETR1;
int sysctl_tcp_retries2 __read_mostly = TCP_RETR2;
int sysctl_tcp_orphan_retries __read_mostly;
int sysctl_tcp_thin_linear_timeouts __read_mostly;
static void tcp_write_timer(unsigned long);
static void tcp_delack_timer(unsigned long);
@ -415,7 +416,25 @@ void tcp_retransmit_timer(struct sock *sk)
icsk->icsk_retransmits++;
out_reset_timer:
icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
/* If stream is thin, use linear timeouts. Since 'icsk_backoff' is
* used to reset timer, set to 0. Recalculate 'icsk_rto' as this
* might be increased if the stream oscillates between thin and thick,
* thus the old value might already be too high compared to the value
* set by 'tcp_set_rto' in tcp_input.c which resets the rto without
* backoff. Limit to TCP_THIN_LINEAR_RETRIES before initiating
* exponential backoff behaviour to avoid continue hammering
* linear-timeout retransmissions into a black hole
*/
if (sk->sk_state == TCP_ESTABLISHED &&
(tp->thin_lto || sysctl_tcp_thin_linear_timeouts) &&
tcp_stream_is_thin(tp) &&
icsk->icsk_retransmits <= TCP_THIN_LINEAR_RETRIES) {
icsk->icsk_backoff = 0;
icsk->icsk_rto = min(__tcp_set_rto(tp), TCP_RTO_MAX);
} else {
/* Use normal (exponential) backoff */
icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
}
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto, TCP_RTO_MAX);
if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1))
__sk_dst_reset(sk);