mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-20 20:49:01 +07:00
ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board
Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP157C and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This commit is contained in:
Marek Vasut
Alexandre Torgue
parent
238086efd1
commit
34e0c7847d
@ -1016,6 +1016,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
|
||||
stm32h743i-disco.dtb \
|
||||
stm32mp157a-avenger96.dtb \
|
||||
stm32mp157a-dk1.dtb \
|
||||
stm32mp157c-dhcom-pdk2.dtb \
|
||||
stm32mp157c-dk2.dtb \
|
||||
stm32mp157c-ed1.dtb \
|
||||
stm32mp157c-ev1.dtb
|
||||
|
||||
265
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
Normal file
265
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
Normal file
@ -0,0 +1,265 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
||||
/*
|
||||
* Copyright (C) 2019 Marek Vasut <marex@denx.de>
|
||||
*/
|
||||
|
||||
#include "stm32mp157c-dhcom-som.dtsi"
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
|
||||
/ {
|
||||
model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)";
|
||||
compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart4;
|
||||
serial1 = &usart3;
|
||||
serial2 = &uart8;
|
||||
ethernet0 = ðernet0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
clk_ext_audio_codec: clock-codec {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
display_bl: display-bl {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
|
||||
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
|
||||
default-brightness-level = <8>;
|
||||
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ethernet_vio: vioregulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vio";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "edt,etm0700g0edh6";
|
||||
backlight = <&display_bl>;
|
||||
|
||||
port {
|
||||
lcd_panel_in: endpoint {
|
||||
remote-endpoint = <&lcd_display_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
routing =
|
||||
"MIC_IN", "Capture",
|
||||
"Capture", "Mic Bias",
|
||||
"Playback", "HP_OUT";
|
||||
dais = <&sai2a_port &sai2b_port>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&cec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cec_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ðernet0_rmii_pins_a>;
|
||||
pinctrl-1 = <ðernet0_rmii_pins_sleep_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rmii";
|
||||
max-speed = <100>;
|
||||
phy-handle = <&phy0>;
|
||||
st,eth-ref-clk-sel;
|
||||
phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
|
||||
phy0: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
sgtl5000: codec@a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
#sound-dai-cells = <0>;
|
||||
clocks = <&clk_ext_audio_codec>;
|
||||
VDDA-supply = <&v3v3>;
|
||||
VDDIO-supply = <&vdd>;
|
||||
|
||||
sgtl5000_port: port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sgtl5000_tx_endpoint: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&sai2a_endpoint>;
|
||||
frame-master;
|
||||
bitclock-master;
|
||||
};
|
||||
|
||||
sgtl5000_rx_endpoint: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&sai2b_endpoint>;
|
||||
frame-master;
|
||||
bitclock-master;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
polytouch@38 {
|
||||
compatible = "edt,edt-ft5x06";
|
||||
reg = <0x38>;
|
||||
interrupt-parent = <&gpiog>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
|
||||
linux,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
<dc {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <<dc_pins_b>;
|
||||
pinctrl-1 = <<dc_pins_sleep_b>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
lcd_display_out: endpoint {
|
||||
remote-endpoint = <&lcd_panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&m_can1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&m_can1_pins_a>;
|
||||
pinctrl-1 = <&m_can1_sleep_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
||||
clock-names = "pclk", "x8k", "x11k";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
|
||||
pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
|
||||
status = "okay";
|
||||
|
||||
sai2a: audio-controller@4400b004 {
|
||||
#clock-cells = <0>;
|
||||
dma-names = "tx";
|
||||
clocks = <&rcc SAI2_K>;
|
||||
clock-names = "sai_ck";
|
||||
status = "okay";
|
||||
|
||||
sai2a_port: port {
|
||||
sai2a_endpoint: endpoint {
|
||||
remote-endpoint = <&sgtl5000_tx_endpoint>;
|
||||
format = "i2s";
|
||||
mclk-fs = <512>;
|
||||
dai-tdm-slot-num = <2>;
|
||||
dai-tdm-slot-width = <16>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sai2b: audio-controller@4400b024 {
|
||||
dma-names = "rx";
|
||||
st,sync = <&sai2a 2>;
|
||||
clocks = <&rcc SAI2_K>, <&sai2a>;
|
||||
clock-names = "sai_ck", "MCLK";
|
||||
status = "okay";
|
||||
|
||||
sai2b_port: port {
|
||||
sai2b_endpoint: endpoint {
|
||||
remote-endpoint = <&sgtl5000_rx_endpoint>;
|
||||
format = "i2s";
|
||||
mclk-fs = <512>;
|
||||
dai-tdm-slot-num = <2>;
|
||||
dai-tdm-slot-width = <16>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&timers2 {
|
||||
/* spare dmas for other usage (un-delete to enable pwm capture) */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "okay";
|
||||
pwm2: pwm {
|
||||
pinctrl-0 = <&pwm2_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
timer@1 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usart3_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart8 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart8_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ehci {
|
||||
phys = <&usbphyc_port0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg_hs {
|
||||
dr_mode = "peripheral";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc_port0 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
vdda1v1-supply = <®11>;
|
||||
vdda1v8-supply = <®18>;
|
||||
};
|
||||
|
||||
&usbphyc_port1 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
vdda1v1-supply = <®11>;
|
||||
vdda1v8-supply = <®18>;
|
||||
};
|
||||
368
arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
Normal file
368
arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
Normal file
@ -0,0 +1,368 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) 2019 Marek Vasut <marex@denx.de>
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxaa-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
/ {
|
||||
memory@c0000000 {
|
||||
device_type = "memory";
|
||||
reg = <0xC0000000 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
mcuram2: mcuram2@10000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring0: vdev0vring0@10040000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10040000 0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring1: vdev0vring1@10041000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10041000 0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0buffer: vdev0buffer@10042000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10042000 0x4000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mcuram: mcuram@30000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x30000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
retram: retram@38000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x38000000 0x10000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
vdd-supply = <&vdd>;
|
||||
vdda-supply = <&vdda>;
|
||||
vref-supply = <&vdda>;
|
||||
status = "okay";
|
||||
|
||||
adc1: adc@0 {
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
st,adc-channels = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
adc2: adc@100 {
|
||||
st,adc-channels = <1>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&dac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
|
||||
vref-supply = <&vdda>;
|
||||
status = "okay";
|
||||
|
||||
dac1: dac@1 {
|
||||
status = "okay";
|
||||
};
|
||||
dac2: dac@2 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&dts {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
rtc@32 {
|
||||
compatible = "microcrystal,rv8803";
|
||||
reg = <0x32>;
|
||||
};
|
||||
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmic1-regulators";
|
||||
ldo1-supply = <&v3v3>;
|
||||
ldo2-supply = <&v3v3>;
|
||||
ldo3-supply = <&vdd_ddr>;
|
||||
ldo5-supply = <&v3v3>;
|
||||
ldo6-supply = <&v3v3>;
|
||||
pwr_sw1-supply = <&bst_out>;
|
||||
pwr_sw2-supply = <&bst_out>;
|
||||
|
||||
vddcore: buck1 {
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_ddr: buck2 {
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd: buck3 {
|
||||
regulator-name = "vdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
st,mask-reset;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
v3v3: buck4 {
|
||||
regulator-name = "v3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
regulator-initial-mode = <0>;
|
||||
};
|
||||
|
||||
vdda: ldo1 {
|
||||
regulator-name = "vdda";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
};
|
||||
|
||||
v2v8: ldo2 {
|
||||
regulator-name = "v2v8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
interrupts = <IT_CURLIM_LDO2 0>;
|
||||
};
|
||||
|
||||
vtt_ddr: ldo3 {
|
||||
regulator-name = "vtt_ddr";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_usb: ldo4 {
|
||||
regulator-name = "vdd_usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO4 0>;
|
||||
};
|
||||
|
||||
vdd_sd: ldo5 {
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO5 0>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
v1v8: ldo6 {
|
||||
regulator-name = "v1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
interrupts = <IT_CURLIM_LDO6 0>;
|
||||
};
|
||||
|
||||
vref_ddr: vref_ddr {
|
||||
regulator-name = "vref_ddr";
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
bst_out: boost {
|
||||
regulator-name = "bst_out";
|
||||
interrupts = <IT_OCP_BOOST 0>;
|
||||
};
|
||||
|
||||
vbus_otg: pwr_sw1 {
|
||||
regulator-name = "vbus_otg";
|
||||
interrupts = <IT_OCP_OTG 0>;
|
||||
};
|
||||
|
||||
vbus_sw: pwr_sw2 {
|
||||
regulator-name = "vbus_sw";
|
||||
interrupts = <IT_OCP_SWOUT 0>;
|
||||
regulator-active-discharge;
|
||||
};
|
||||
};
|
||||
|
||||
onkey {
|
||||
compatible = "st,stpmic1-onkey";
|
||||
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
|
||||
interrupt-names = "onkey-falling", "onkey-rising";
|
||||
power-off-time-sec = <10>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "st,stpmic1-wdt";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
touchscreen@49 {
|
||||
compatible = "ti,tsc2004";
|
||||
reg = <0x49>;
|
||||
vio-supply = <&v3v3>;
|
||||
interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&ipcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
timeout-sec = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&m4_rproc {
|
||||
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
|
||||
<&vdev0vring1>, <&vdev0buffer>;
|
||||
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
|
||||
mbox-names = "vq0", "vq1", "shutdown";
|
||||
interrupt-parent = <&exti>;
|
||||
interrupts = <68 1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwr_regulators {
|
||||
vdd-supply = <&vdd>;
|
||||
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
|
||||
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
|
||||
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash0: mx66l51235l@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <108000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&rng1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
|
||||
broken-cd;
|
||||
st,sig-dir;
|
||||
st,neg-edge;
|
||||
st,use-ckin;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&vdd_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc2 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
|
||||
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
|
||||
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
st,neg-edge;
|
||||
bus-width = <8>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
vqmmc-supply = <&v3v3>;
|
||||
mmc-ddr-3_3v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc3 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc3_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
|
||||
broken-cd;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
vqmmc-supply = <&v3v3>;
|
||||
mmc-ddr-3_3v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user