mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-12 21:06:48 +07:00
arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4
Add the board support for the Hardkernel Odroid-C4 single board computer. The Odroid-C4 is the Odroid-C2 successor with same form factor, but using a modern Amlogic S905X3 (SM1) SoC and 4x USB3 ports. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506080702.6645-3-narmstrong@baylibre.com
This commit is contained in:
parent
838f0905aa
commit
326e57518b
@ -40,4 +40,5 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
|
||||
|
402
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
Normal file
402
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
Normal file
@ -0,0 +1,402 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-sm1.dtsi"
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "hardkernel,odroid-c4", "amlogic,sm1";
|
||||
model = "Hardkernel ODROID-C4";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-blue {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
tflash_vdd: regulator-tflash_vdd {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "TFLASH_VDD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
tf_io: gpio-regulator-tf_io {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "TF_IO";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
|
||||
states = <3300000 0>,
|
||||
<1800000 1>;
|
||||
};
|
||||
|
||||
flash_1v8: regulator-flash_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "FLASH_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
main_12v: regulator-main_12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "12V";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_5v: regulator-vcc_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&main_12v>;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-vcc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
/* FIXME: actually controlled by VDDCPU_B_EN */
|
||||
};
|
||||
|
||||
vddcpu: regulator-vddcpu {
|
||||
/*
|
||||
* MP8756GD Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU";
|
||||
regulator-min-microvolt = <721000>;
|
||||
regulator-max-microvolt = <1022000>;
|
||||
|
||||
vin-supply = <&main_12v>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hub_5v: regulator-hub_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "HUB_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
/* Connected to the Hub CHIPENABLE, LOW sets low power state */
|
||||
gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
usb_pwr_en: regulator-usb_pwr_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR_EN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
/* Connected to the microUSB port power enable */
|
||||
gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&main_12v>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU1_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU2_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU3_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&ext_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_14 */
|
||||
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&external_phy>;
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
};
|
||||
|
||||
&gpio {
|
||||
gpio-line-names =
|
||||
/* GPIOZ */
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
/* GPIOH */
|
||||
"", "", "", "", "",
|
||||
"PIN_36", /* GPIOH_5 */
|
||||
"PIN_26", /* GPIOH_6 */
|
||||
"PIN_32", /* GPIOH_7 */
|
||||
"",
|
||||
/* BOOT */
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
/* GPIOC */
|
||||
"", "", "", "", "", "", "", "",
|
||||
/* GPIOA */
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "",
|
||||
"PIN_27", /* GPIOA_14 */
|
||||
"PIN_28", /* GPIOA_15 */
|
||||
/* GPIOX */
|
||||
"PIN_16", /* GPIOX_0 */
|
||||
"PIN_18", /* GPIOX_1 */
|
||||
"PIN_22", /* GPIOX_2 */
|
||||
"PIN_11", /* GPIOX_3 */
|
||||
"PIN_13", /* GPIOX_4 */
|
||||
"PIN_7", /* GPIOX_5 */
|
||||
"PIN_33", /* GPIOX_6 */
|
||||
"PIN_15", /* GPIOX_7 */
|
||||
"PIN_19", /* GPIOX_8 */
|
||||
"PIN_21", /* GPIOX_9 */
|
||||
"PIN_24", /* GPIOX_10 */
|
||||
"PIN_23", /* GPIOX_11 */
|
||||
"PIN_8", /* GPIOX_12 */
|
||||
"PIN_10", /* GPIOX_13 */
|
||||
"PIN_29", /* GPIOX_14 */
|
||||
"PIN_31", /* GPIOX_15 */
|
||||
"PIN_12", /* GPIOX_16 */
|
||||
"PIN_3", /* GPIOX_17 */
|
||||
"PIN_5", /* GPIOX_18 */
|
||||
"PIN_35"; /* GPIOX_19 */
|
||||
|
||||
/*
|
||||
* WARNING: The USB Hub on the Odroid-C4 needs a reset signal
|
||||
* to be turned high in order to be detected by the USB Controller
|
||||
* This signal should be handled by a USB specific power sequence
|
||||
* in order to reset the Hub when USB bus is powered down.
|
||||
*/
|
||||
usb-hub {
|
||||
gpio-hog;
|
||||
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "usb-hub-reset";
|
||||
};
|
||||
};
|
||||
|
||||
&gpio_ao {
|
||||
gpio-line-names =
|
||||
/* GPIOAO */
|
||||
"", "", "", "",
|
||||
"PIN_47", /* GPIOAO_4 */
|
||||
"", "",
|
||||
"PIN_45", /* GPIOAO_7 */
|
||||
"PIN_46", /* GPIOAO_8 */
|
||||
"PIN_44", /* GPIOAO_9 */
|
||||
"PIN_42", /* GPIOAO_10 */
|
||||
"",
|
||||
/* GPIOE */
|
||||
"", "", "";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&vcc_5v>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
linux,rc-map-name = "rc-odroid";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&tflash_vdd>;
|
||||
vqmmc-supply = <&tf_io>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&flash_1v8>;
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
vbus-supply = <&usb_pwr_en>;
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
phy-supply = <&vcc_5v>;
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
/* Enable the hub which is connected to this port */
|
||||
phy-supply = <&hub_5v>;
|
||||
};
|
Loading…
Reference in New Issue
Block a user