From 2da9ad761e70c6a22e3a84f9a3e67faeef122a58 Mon Sep 17 00:00:00 2001 From: John Youn Date: Fri, 20 May 2016 16:34:26 -0700 Subject: [PATCH] usb: dwc3: Use the correct speed macros for DSTS/DCFG Correct the use of the DWC3_DSTS_XXX_SPEED and DWC3_DCFG_XXX_SPEED macros. The wrong set of macros were being used in a few places. This is only a cosmetic change as the values for both sets are identical. Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index d0f74583c955..0c11fd6e305e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1672,16 +1672,16 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) } else { switch (dwc->maximum_speed) { case USB_SPEED_LOW: - reg |= DWC3_DSTS_LOWSPEED; + reg |= DWC3_DCFG_LOWSPEED; break; case USB_SPEED_FULL: - reg |= DWC3_DSTS_FULLSPEED1; + reg |= DWC3_DCFG_FULLSPEED1; break; case USB_SPEED_HIGH: - reg |= DWC3_DSTS_HIGHSPEED; + reg |= DWC3_DCFG_HIGHSPEED; break; case USB_SPEED_SUPER_PLUS: - reg |= DWC3_DSTS_SUPERSPEED_PLUS; + reg |= DWC3_DCFG_SUPERSPEED_PLUS; break; default: dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n", @@ -2459,12 +2459,12 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) dwc3_update_ram_clk_sel(dwc, speed); switch (speed) { - case DWC3_DCFG_SUPERSPEED_PLUS: + case DWC3_DSTS_SUPERSPEED_PLUS: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dwc->gadget.ep0->maxpacket = 512; dwc->gadget.speed = USB_SPEED_SUPER_PLUS; break; - case DWC3_DCFG_SUPERSPEED: + case DWC3_DSTS_SUPERSPEED: /* * WORKAROUND: DWC3 revisions <1.90a have an issue which * would cause a missing USB3 Reset event. @@ -2485,18 +2485,18 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) dwc->gadget.ep0->maxpacket = 512; dwc->gadget.speed = USB_SPEED_SUPER; break; - case DWC3_DCFG_HIGHSPEED: + case DWC3_DSTS_HIGHSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); dwc->gadget.ep0->maxpacket = 64; dwc->gadget.speed = USB_SPEED_HIGH; break; - case DWC3_DCFG_FULLSPEED2: - case DWC3_DCFG_FULLSPEED1: + case DWC3_DSTS_FULLSPEED2: + case DWC3_DSTS_FULLSPEED1: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); dwc->gadget.ep0->maxpacket = 64; dwc->gadget.speed = USB_SPEED_FULL; break; - case DWC3_DCFG_LOWSPEED: + case DWC3_DSTS_LOWSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); dwc->gadget.ep0->maxpacket = 8; dwc->gadget.speed = USB_SPEED_LOW; @@ -2506,8 +2506,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) /* Enable USB2 LPM Capability */ if ((dwc->revision > DWC3_REVISION_194A) && - (speed != DWC3_DCFG_SUPERSPEED) && - (speed != DWC3_DCFG_SUPERSPEED_PLUS)) { + (speed != DWC3_DSTS_SUPERSPEED) && + (speed != DWC3_DSTS_SUPERSPEED_PLUS)) { reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg |= DWC3_DCFG_LPM_CAP; dwc3_writel(dwc->regs, DWC3_DCFG, reg);