mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-27 02:40:52 +07:00
e1000e: Fix HW Error on es2lan, ARP capture issue by BMC
Several components to this complex fix. The es2lan cards occasionally gave a "HW Error" especially when forcing speed. Some users also reported that the BMC stole ARP packets. The fixes include setting the proper SW_FW bits to tell the BMC that we're active and not do any un-initialization at all, so the setup routine is largely changed. Signed-off-by: David Graham <david.graham@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
David Graham
Jeff Garzik
parent
de5b3077da
commit
2d9498f369
@ -184,6 +184,7 @@
|
||||
#define E1000_SWFW_EEP_SM 0x1
|
||||
#define E1000_SWFW_PHY0_SM 0x2
|
||||
#define E1000_SWFW_PHY1_SM 0x4
|
||||
#define E1000_SWFW_CSR_SM 0x8
|
||||
|
||||
/* Device Control */
|
||||
#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
|
||||
|
||||
@ -449,6 +449,8 @@ extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
|
||||
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
|
||||
u32 usec_interval, bool *success);
|
||||
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
|
||||
extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
|
||||
extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
|
||||
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
|
||||
|
||||
static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
|
||||
|
||||
@ -41,6 +41,7 @@
|
||||
#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
|
||||
#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
|
||||
#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
|
||||
#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
|
||||
|
||||
#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
|
||||
#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
|
||||
@ -48,6 +49,7 @@
|
||||
|
||||
#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
|
||||
#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
|
||||
#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
|
||||
|
||||
#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
|
||||
#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
|
||||
@ -85,6 +87,9 @@
|
||||
/* Kumeran Mode Control Register (Page 193, Register 16) */
|
||||
#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
|
||||
|
||||
/* Max number of times Kumeran read/write should be validated */
|
||||
#define GG82563_MAX_KMRN_RETRY 0x5
|
||||
|
||||
/* Power Management Control Register (Page 193, Register 20) */
|
||||
#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
|
||||
/* 1=Enable SERDES Electrical Idle */
|
||||
@ -270,6 +275,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
|
||||
u16 mask;
|
||||
|
||||
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
|
||||
mask |= E1000_SWFW_CSR_SM;
|
||||
|
||||
return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
|
||||
}
|
||||
@ -286,6 +292,8 @@ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
|
||||
u16 mask;
|
||||
|
||||
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
|
||||
mask |= E1000_SWFW_CSR_SM;
|
||||
|
||||
e1000_release_swfw_sync_80003es2lan(hw, mask);
|
||||
}
|
||||
|
||||
@ -410,20 +418,27 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
|
||||
u32 page_select;
|
||||
u16 temp;
|
||||
|
||||
ret_val = e1000_acquire_phy_80003es2lan(hw);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
/* Select Configuration Page */
|
||||
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
|
||||
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
|
||||
page_select = GG82563_PHY_PAGE_SELECT;
|
||||
else
|
||||
} else {
|
||||
/*
|
||||
* Use Alternative Page Select register to access
|
||||
* registers 30 and 31
|
||||
*/
|
||||
page_select = GG82563_PHY_PAGE_SELECT_ALT;
|
||||
}
|
||||
|
||||
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
|
||||
ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp);
|
||||
if (ret_val)
|
||||
ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
|
||||
if (ret_val) {
|
||||
e1000_release_phy_80003es2lan(hw);
|
||||
return ret_val;
|
||||
}
|
||||
|
||||
/*
|
||||
* The "ready" bit in the MDIC register may be incorrectly set
|
||||
@ -433,20 +448,21 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
|
||||
udelay(200);
|
||||
|
||||
/* ...and verify the command was successful. */
|
||||
ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp);
|
||||
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
|
||||
|
||||
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
|
||||
ret_val = -E1000_ERR_PHY;
|
||||
e1000_release_phy_80003es2lan(hw);
|
||||
return ret_val;
|
||||
}
|
||||
|
||||
udelay(200);
|
||||
|
||||
ret_val = e1000e_read_phy_reg_m88(hw,
|
||||
MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
|
||||
udelay(200);
|
||||
e1000_release_phy_80003es2lan(hw);
|
||||
|
||||
return ret_val;
|
||||
}
|
||||
@ -467,20 +483,27 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
|
||||
u32 page_select;
|
||||
u16 temp;
|
||||
|
||||
ret_val = e1000_acquire_phy_80003es2lan(hw);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
/* Select Configuration Page */
|
||||
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
|
||||
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
|
||||
page_select = GG82563_PHY_PAGE_SELECT;
|
||||
else
|
||||
} else {
|
||||
/*
|
||||
* Use Alternative Page Select register to access
|
||||
* registers 30 and 31
|
||||
*/
|
||||
page_select = GG82563_PHY_PAGE_SELECT_ALT;
|
||||
}
|
||||
|
||||
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
|
||||
ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp);
|
||||
if (ret_val)
|
||||
ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
|
||||
if (ret_val) {
|
||||
e1000_release_phy_80003es2lan(hw);
|
||||
return ret_val;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
@ -491,18 +514,20 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
|
||||
udelay(200);
|
||||
|
||||
/* ...and verify the command was successful. */
|
||||
ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp);
|
||||
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
|
||||
|
||||
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp)
|
||||
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
|
||||
e1000_release_phy_80003es2lan(hw);
|
||||
return -E1000_ERR_PHY;
|
||||
}
|
||||
|
||||
udelay(200);
|
||||
|
||||
ret_val = e1000e_write_phy_reg_m88(hw,
|
||||
MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
|
||||
udelay(200);
|
||||
e1000_release_phy_80003es2lan(hw);
|
||||
|
||||
return ret_val;
|
||||
}
|
||||
@ -882,10 +907,10 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
|
||||
struct e1000_phy_info *phy = &hw->phy;
|
||||
s32 ret_val;
|
||||
u32 ctrl_ext;
|
||||
u16 data;
|
||||
u32 i = 0;
|
||||
u16 data, data2;
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL,
|
||||
&data);
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
@ -893,8 +918,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
|
||||
/* Use 25MHz for both link down and 1000Base-T for Tx clock. */
|
||||
data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
|
||||
|
||||
ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL,
|
||||
data);
|
||||
ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
@ -954,6 +978,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1000e_read_kmrn_reg(hw,
|
||||
E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
|
||||
&data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
|
||||
ret_val = e1000e_write_kmrn_reg(hw,
|
||||
E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
|
||||
data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
@ -983,9 +1019,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
do {
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
|
||||
&data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
|
||||
&data2);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
i++;
|
||||
} while ((data != data2) && (i < GG82563_MAX_KMRN_RETRY));
|
||||
|
||||
data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
|
||||
ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
|
||||
@ -1074,7 +1119,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
|
||||
{
|
||||
s32 ret_val;
|
||||
u32 tipg;
|
||||
u16 reg_data;
|
||||
u32 i = 0;
|
||||
u16 reg_data, reg_data2;
|
||||
|
||||
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
|
||||
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
|
||||
@ -1088,9 +1134,16 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
|
||||
tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
|
||||
ew32(TIPG, tipg);
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
do {
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data2);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
i++;
|
||||
} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
|
||||
|
||||
if (duplex == HALF_DUPLEX)
|
||||
reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
|
||||
@ -1112,8 +1165,9 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
|
||||
static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
|
||||
{
|
||||
s32 ret_val;
|
||||
u16 reg_data;
|
||||
u16 reg_data, reg_data2;
|
||||
u32 tipg;
|
||||
u32 i = 0;
|
||||
|
||||
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
|
||||
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
|
||||
@ -1127,9 +1181,16 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
|
||||
tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
|
||||
ew32(TIPG, tipg);
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
do {
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data2);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
i++;
|
||||
} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
|
||||
|
||||
reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
|
||||
ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
|
||||
|
||||
@ -116,7 +116,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* e1000_read_phy_reg_mdic - Read MDI control register
|
||||
* e1000e_read_phy_reg_mdic - Read MDI control register
|
||||
* @hw: pointer to the HW structure
|
||||
* @offset: register offset to be read
|
||||
* @data: pointer to the read data
|
||||
@ -124,7 +124,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
|
||||
* Reads the MDI control register in the PHY at offset and stores the
|
||||
* information read to data.
|
||||
**/
|
||||
static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
{
|
||||
struct e1000_phy_info *phy = &hw->phy;
|
||||
u32 i, mdic = 0;
|
||||
@ -150,7 +150,7 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
* Increasing the time out as testing showed failures with
|
||||
* the lower time out
|
||||
*/
|
||||
for (i = 0; i < 64; i++) {
|
||||
for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
|
||||
udelay(50);
|
||||
mdic = er32(MDIC);
|
||||
if (mdic & E1000_MDIC_READY)
|
||||
@ -170,14 +170,14 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
}
|
||||
|
||||
/**
|
||||
* e1000_write_phy_reg_mdic - Write MDI control register
|
||||
* e1000e_write_phy_reg_mdic - Write MDI control register
|
||||
* @hw: pointer to the HW structure
|
||||
* @offset: register offset to write to
|
||||
* @data: data to write to register at offset
|
||||
*
|
||||
* Writes data to MDI control register in the PHY at offset.
|
||||
**/
|
||||
static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
{
|
||||
struct e1000_phy_info *phy = &hw->phy;
|
||||
u32 i, mdic = 0;
|
||||
@ -199,9 +199,13 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
|
||||
ew32(MDIC, mdic);
|
||||
|
||||
/* Poll the ready bit to see if the MDI read completed */
|
||||
for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
|
||||
udelay(5);
|
||||
/*
|
||||
* Poll the ready bit to see if the MDI read completed
|
||||
* Increasing the time out as testing showed failures with
|
||||
* the lower time out
|
||||
*/
|
||||
for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
|
||||
udelay(50);
|
||||
mdic = er32(MDIC);
|
||||
if (mdic & E1000_MDIC_READY)
|
||||
break;
|
||||
@ -210,6 +214,10 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
hw_dbg(hw, "MDI Write did not complete\n");
|
||||
return -E1000_ERR_PHY;
|
||||
}
|
||||
if (mdic & E1000_MDIC_ERROR) {
|
||||
hw_dbg(hw, "MDI Error\n");
|
||||
return -E1000_ERR_PHY;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -232,9 +240,8 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1000_read_phy_reg_mdic(hw,
|
||||
MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
|
||||
hw->phy.ops.release_phy(hw);
|
||||
|
||||
@ -258,9 +265,8 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1000_write_phy_reg_mdic(hw,
|
||||
MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
|
||||
hw->phy.ops.release_phy(hw);
|
||||
|
||||
@ -286,18 +292,17 @@ s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
return ret_val;
|
||||
|
||||
if (offset > MAX_PHY_MULTI_PAGE_REG) {
|
||||
ret_val = e1000_write_phy_reg_mdic(hw,
|
||||
IGP01E1000_PHY_PAGE_SELECT,
|
||||
(u16)offset);
|
||||
ret_val = e1000e_write_phy_reg_mdic(hw,
|
||||
IGP01E1000_PHY_PAGE_SELECT,
|
||||
(u16)offset);
|
||||
if (ret_val) {
|
||||
hw->phy.ops.release_phy(hw);
|
||||
return ret_val;
|
||||
}
|
||||
}
|
||||
|
||||
ret_val = e1000_read_phy_reg_mdic(hw,
|
||||
MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
|
||||
hw->phy.ops.release_phy(hw);
|
||||
|
||||
@ -322,18 +327,17 @@ s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
return ret_val;
|
||||
|
||||
if (offset > MAX_PHY_MULTI_PAGE_REG) {
|
||||
ret_val = e1000_write_phy_reg_mdic(hw,
|
||||
IGP01E1000_PHY_PAGE_SELECT,
|
||||
(u16)offset);
|
||||
ret_val = e1000e_write_phy_reg_mdic(hw,
|
||||
IGP01E1000_PHY_PAGE_SELECT,
|
||||
(u16)offset);
|
||||
if (ret_val) {
|
||||
hw->phy.ops.release_phy(hw);
|
||||
return ret_val;
|
||||
}
|
||||
}
|
||||
|
||||
ret_val = e1000_write_phy_reg_mdic(hw,
|
||||
MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
data);
|
||||
|
||||
hw->phy.ops.release_phy(hw);
|
||||
|
||||
@ -420,7 +424,9 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
|
||||
/* For newer PHYs this bit is downshift enable */
|
||||
if (phy->type == e1000_phy_m88)
|
||||
phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
|
||||
|
||||
/*
|
||||
* Options:
|
||||
@ -463,7 +469,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
if (phy->revision < 4) {
|
||||
if ((phy->type == e1000_phy_m88) && (phy->revision < 4)) {
|
||||
/*
|
||||
* Force TX_CLK in the Extended PHY Specific Control Register
|
||||
* to 25MHz clock.
|
||||
@ -518,8 +524,11 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
|
||||
return ret_val;
|
||||
}
|
||||
|
||||
/* Wait 15ms for MAC to configure PHY from NVM settings. */
|
||||
msleep(15);
|
||||
/*
|
||||
* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
|
||||
* timeout issues when LFS is enabled.
|
||||
*/
|
||||
msleep(100);
|
||||
|
||||
/* disable lplu d0 during driver init */
|
||||
ret_val = e1000_set_d0_lplu_state(hw, 0);
|
||||
@ -1152,9 +1161,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
|
||||
|
||||
if (!active) {
|
||||
data &= ~IGP02E1000_PM_D3_LPLU;
|
||||
ret_val = e1e_wphy(hw,
|
||||
IGP02E1000_PHY_POWER_MGMT,
|
||||
data);
|
||||
ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
/*
|
||||
|
||||
Loading…
Reference in New Issue
Block a user